| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250424134221.2012293-1-chiang.brian@inventec.corp-partner.google.com> Date: Thu, 24 Apr 2025 21:42:21 +0800 From: Chiang Brian <chiang.brian@...entec.com> To: chiang.brian@...entec.com Cc: corbet@....net, jdelvare@...e.com, linux-doc@...r.kernel.org, linux-hwmon@...r.kernel.org, linux-kernel@...r.kernel.org, linux@...ck-us.net Subject: Re: [PATCH v6] hwmon: (pmbus/tps53679) Add support for TPS53685 Here is the boot log: [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd040] [ 0.000000] Linux version 5.15.167-yocto-s-dirty-42e6584 (oe-user@...host) (aarch64-openbmc-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP Thu Apr 24 09:39:16 UTC 2025 [ 0.000000] Machine model: CIG Board [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000f0000000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] Memory limited to 863MB [ 0.000000] crashkernel reserved: 0x0000000031e00000 - 0x0000000035e00000 (64 MB) [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000035fbffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000035fbffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000035fbffff] [ 0.000000] On node 0, zone Normal: 8256 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 28 pages/cpu s74968 r8192 d31528 u114688 [ 0.000000] pcpu-alloc: s74968 r8192 d31528 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 217665 [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xf0000000 root=/dev/ram console=ttyS0,115200n8 mem=884480k ramdisk_size=48000 oops=panic panic=20 crashkernel=64M [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:on [ 0.000000] mem auto-init: clearing system memory may take some time... [ 0.000000] Memory: 719212K/884480K available (8704K kernel code, 1328K rwdata, 2688K rodata, 768K init, 335K bss, 165268K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 29995 entries in 118 pages [ 0.000000] ftrace: allocated 118 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] arch_timer: cp15 timer(s) running at 250.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x7350b89c29, max_idle_ns: 881590431910 ns [ 0.000000] sched_clock: 56 bits at 250MHz, resolution 4ns, wraps every 4398046511102ns [ 0.008608] Calibrating delay loop (skipped), value calculated using timer frequency.. 500.00 BogoMIPS (lpj=1000000) [ 0.019712] pid_max: default: 32768 minimum: 301 [ 0.025105] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.032912] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.043221] rcu: Hierarchical SRCU implementation. [ 0.049942] smp: Bringing up secondary CPUs ... [ 0.063084] Detected VIPT I-cache on CPU1 [ 0.063147] CPU1: Booted secondary processor 0x0000000001 [0x411fd040] [ 0.071484] Detected VIPT I-cache on CPU2 [ 0.071526] CPU2: Booted secondary processor 0x0000000002 [0x411fd040] [ 0.079849] Detected VIPT I-cache on CPU3 [ 0.079887] CPU3: Booted secondary processor 0x0000000003 [0x411fd040] [ 0.079965] smp: Brought up 1 node, 4 CPUs [ 0.117589] SMP: Total of 4 processors activated. [ 0.122549] CPU features: detected: 32-bit EL0 Support [ 0.127965] CPU features: detected: CRC32 instructions [ 0.133503] CPU: All CPU(s) started at EL1 [ 0.137840] alternatives: patching kernel code [ 0.143557] devtmpfs: initialized [ 0.163688] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.173992] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.181543] pinctrl core: initialized pinctrl subsystem [ 0.188228] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.195066] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.202958] thermal_sys: Registered thermal governor 'step_wise' [ 0.203507] ASID allocator initialised with 65536 entries [ 0.217254] pstore: Registered ramoops as persistent store backend [ 0.223788] ramoops: using 0x2040000@...5fc0000, ecc: 0 [ 0.274562] npcm8xx Pinctrl driver probed [ 0.296740] cryptd: max_cpu_qlen set to 1000 [ 0.315908] SCSI subsystem initialized [ 0.320139] usbcore: registered new interface driver usbfs [ 0.325967] usbcore: registered new interface driver hub [ 0.331620] usbcore: registered new device driver usb [ 0.337102] EDAC MC: Ver: 3.0.0 [ 0.340516] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 0.341507] mctp: management component transport protocol core [ 0.347661] NET: Registered PF_MCTP protocol family [ 0.353164] clocksource: Switched to clocksource arch_sys_counter [ 0.381535] NET: Registered PF_INET protocol family [ 0.386835] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.395690] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.404519] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.412693] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.420939] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.428681] TCP: Hash tables configured (established 8192 bind 8192) [ 0.435471] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.442478] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.450081] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.456339] Trying to unpack rootfs image as initramfs... [ 0.970889] Freeing initrd memory: 1176K [ 1.070050] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 1.082537] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.088706] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.093597] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.100416] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 1.106018] NET: Registered PF_ALG protocol family [ 1.118164] npcm-kcs-bmc f0007000.kcs1: Initialised IPMI client for channel 1 [ 1.125786] nuvoton-kcs-bmc: channel=1 idr=0x10 odr=0xe str=0xc [ 1.132260] npcm-kcs-bmc f0007000.kcs2: Initialised IPMI client for channel 2 [ 1.139796] nuvoton-kcs-bmc: channel=2 idr=0x22 odr=0x20 str=0x1e [ 1.146447] npcm-kcs-bmc f0007000.kcs3: Initialised IPMI client for channel 3 [ 1.153979] nuvoton-kcs-bmc: channel=3 idr=0x34 odr=0x32 str=0x30 [ 1.161419] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.169910] printk: console [ttyS0] disabled [ 1.174503] f0000000.serial: ttyS0 at MMIO 0xf0000000 (irq = 22, base_baud = 1500000) is a Nuvoton 16550 [ 1.184537] printk: console [ttyS0] enabled [ 1.193120] printk: bootconsole [uart8250] disabled [ 1.203628] f0001000.serial: ttyS1 at MMIO 0xf0001000 (irq = 23, base_baud = 1500000) is a Nuvoton 16550 [ 1.213589] f0002000.serial: ttyS2 at MMIO 0xf0002000 (irq = 24, base_baud = 1500000) is a Nuvoton 16550 [ 1.223557] f0003000.serial: ttyS3 at MMIO 0xf0003000 (irq = 25, base_baud = 1500000) is a Nuvoton 16550 [ 1.233683] f0004000.serial: ttyS4 at MMIO 0xf0004000 (irq = 26, base_baud = 1500000) is a Nuvoton 16550 [ 1.244557] NPCMx50: OTP (FUZE) module is ready [ 1.250747] brd: module loaded [ 1.257868] loop: module loaded [ 1.271690] NPCM BIOS Post Code probe [ 1.276018] NPCM7xx PCI Mailbox probed [ 1.280224] jtag-master f0208000.jtm: npcm_jtm_probe [ 1.285571] jtag-master f0209000.jtm: npcm_jtm_probe [ 1.291826] spi-nor spi0.0: dauntlessd2-1024 (65536 Kbytes) [ 1.297428] NPCM-FIU fb000000.spi: Reserved memory not defined, direct read disabled [ 1.305173] NPCM-FIU fb000000.spi: Reserved memory not defined, direct read disabled [ 1.316664] 8 fixed-partitions partitions found on MTD device bmc [ 1.322784] Creating 8 MTD partitions on "bmc": [ 1.327321] 0x000000000000-0x000000150000 : "u-boot" [ 1.333340] 0x000000150000-0x000000160000 : "image-descriptor" [ 1.340018] 0x000000160000-0x000000850000 : "kernel" [ 1.345890] 0x000000850000-0x000003970000 : "rofs" [ 1.351586] 0x000003bf0000-0x000003cf0000 : "hoth-secondary" [ 1.358055] 0x000003bf0000-0x000003cf0000 : "hoth-update" [ 1.364347] 0x000003cf0000-0x000003ff0000 : "rwfs" [ 1.370040] 0x000003ff0000-0x000004000000 : "hoth-mailbox" [ 1.377360] spi-nor spi1.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 1.384247] spi-nor: probe of spi1.0 failed with error -2 [ 1.392411] stmmaceth f0804000.eth: IRQ eth_wake_irq not found [ 1.398277] stmmaceth f0804000.eth: IRQ eth_lpi not found [ 1.403776] stmmaceth f0804000.eth: PTP uses main clock [ 1.409227] stmmaceth f0804000.eth: User ID: 0x10, Synopsys ID: 0x37 [ 1.415597] stmmaceth f0804000.eth: DWMAC1000 [ 1.420045] stmmaceth f0804000.eth: DMA HW capability register supported [ 1.426744] stmmaceth f0804000.eth: RX Checksum Offload Engine supported [ 1.433444] stmmaceth f0804000.eth: COE Type 2 [ 1.437890] stmmaceth f0804000.eth: TX Checksum insertion supported [ 1.444154] stmmaceth f0804000.eth: Wake-Up On Lan supported [ 1.449888] stmmaceth f0804000.eth: Normal descriptors [ 1.455030] stmmaceth f0804000.eth: Ring mode enabled [ 1.460081] stmmaceth f0804000.eth: Enable RX Mitigation via HW Watchdog Timer [ 1.467300] stmmaceth f0804000.eth: device MAC address 00:00:f7:a0:00:fc [ 1.485181] Broadcom BCM54612E stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 1.496018] stmmaceth f0806000.eth: IRQ eth_wake_irq not found [ 1.501867] stmmaceth f0806000.eth: IRQ eth_lpi not found [ 1.507397] stmmaceth f0806000.eth: PTP uses main clock [ 1.512841] stmmaceth f0806000.eth: User ID: 0x10, Synopsys ID: 0x37 [ 1.519208] stmmaceth f0806000.eth: DWMAC1000 [ 1.523665] stmmaceth f0806000.eth: DMA HW capability register supported [ 1.530367] stmmaceth f0806000.eth: RX Checksum Offload Engine supported [ 1.537066] stmmaceth f0806000.eth: COE Type 2 [ 1.541512] stmmaceth f0806000.eth: TX Checksum insertion supported [ 1.547777] stmmaceth f0806000.eth: Wake-Up On Lan supported [ 1.553491] stmmaceth f0806000.eth: Normal descriptors [ 1.558631] stmmaceth f0806000.eth: Ring mode enabled [ 1.563684] stmmaceth f0806000.eth: Enable RX Mitigation via HW Watchdog Timer [ 1.570918] stmmaceth f0806000.eth: device MAC address e6:47:71:24:b3:ad [ 1.578797] MCTP I2C interface driver [ 1.582495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.589031] ehci-pci: EHCI PCI platform driver [ 1.593520] npcm7xx-ehci: EHCI npcm7xx driver [ 1.597998] npcm7xx-ehci f0828100.usb: EHCI Host Controller [ 1.603590] npcm7xx-ehci f0828100.usb: new USB bus registered, assigned bus number 1 [ 1.611459] npcm7xx-ehci f0828100.usb: irq 14, io mem 0xf0828100 [ 1.633177] npcm7xx-ehci f0828100.usb: USB 2.0 started, EHCI 1.00 [ 1.639545] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.647818] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.655041] usb usb1: Product: EHCI Host Controller [ 1.659921] usb usb1: Manufacturer: Linux 5.15.167-yocto-s-dirty-42e6584 ehci_hcd [ 1.667401] usb usb1: SerialNumber: f0828100.usb [ 1.672529] hub 1-0:1.0: USB hub found [ 1.676329] hub 1-0:1.0: 1 port detected [ 1.680737] npcm7xx-ehci f082a100.usb: EHCI Host Controller [ 1.686329] npcm7xx-ehci f082a100.usb: new USB bus registered, assigned bus number 2 [ 1.694182] npcm7xx-ehci f082a100.usb: irq 15, io mem 0xf082a100 [ 1.713172] npcm7xx-ehci f082a100.usb: USB 2.0 started, EHCI 1.00 [ 1.719517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.727789] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.735011] usb usb2: Product: EHCI Host Controller [ 1.739892] usb usb2: Manufacturer: Linux 5.15.167-yocto-s-dirty-42e6584 ehci_hcd [ 1.747371] usb usb2: SerialNumber: f082a100.usb [ 1.752505] hub 2-0:1.0: USB hub found [ 1.756301] hub 2-0:1.0: 1 port detected [ 1.760819] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.767019] ohci-pci: OHCI PCI platform driver [ 1.771511] ohci-npcm7xx: OHCI NPCM7XX driver [ 1.776138] usbcore: registered new interface driver cdc_acm [ 1.781806] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.789873] usbcore: registered new interface driver usb-storage [ 1.800176] i2c_dev: i2c /dev entries driver [ 1.807640] at24 4-0050: supply vcc not found, using dummy regulator [ 1.814441] at24 4-0050: 128 byte 24c01 EEPROM, writable, 8 bytes/write [ 1.825101] rtc-ds1307 5-0068: registered as rtc0 [ 1.830831] rtc-ds1307 5-0068: setting system clock to 2000-06-13T06:31:41 UTC (960877901) [ 1.839551] rtc-pcf85063 5-0051: RTC chip is not present [ 1.845118] at24 5-0050: supply vcc not found, using dummy regulator [ 1.852272] at24 5-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 1.859838] at24 6-0050: supply vcc not found, using dummy regulator [ 1.866651] at24 6-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 1.874471] pca953x 7-0024: supply vcc not found, using dummy regulator [ 1.881255] pca953x 7-0024: using no AI [ 1.885195] pca953x 7-0024: failed writing register [ 1.890382] pca953x 7-0020: supply vcc not found, using dummy regulator [ 1.897099] pca953x 7-0020: using no AI [ 1.901031] pca953x 7-0020: failed writing register [ 1.906283] pca953x 7-0021: supply vcc not found, using dummy regulator [ 1.909493] random: crng init done [ 1.913013] pca953x 7-0021: using no AI [ 1.920240] pca953x 7-0021: failed writing register [ 1.925596] pca953x 7-0022: supply vcc not found, using dummy regulator [ 1.932324] pca953x 7-0022: using no AI [ 1.933177] usb 1-1: new high-speed USB device number 2 using npcm7xx-ehci [ 1.943090] pca953x 7-0022: failed writing register [ 1.948380] pca953x 7-0023: supply vcc not found, using dummy regulator [ 1.955104] pca953x 7-0023: using no AI [ 1.959042] pca953x 7-0023: failed writing register [ 1.964214] pca953x 7-0025: supply vcc not found, using dummy regulator [ 1.970934] pca953x 7-0025: using no AI [ 1.974865] pca953x 7-0025: failed writing register [ 1.980053] at24 7-0052: supply vcc not found, using dummy regulator [ 2.016946] nuvoton-i2c f0088000.i2c: i2c8 register slave SA=0x10, PEC=0 [ 2.024455] at24 8-0053: supply vcc not found, using dummy regulator [ 2.031207] at24 8-0053: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 2.045300] i2c i2c-4: Added multiplexed i2c bus 50 [ 2.050403] i2c i2c-4: Added multiplexed i2c bus 51 [ 2.055508] i2c i2c-4: Added multiplexed i2c bus 52 [ 2.060749] i2c i2c-4: Added multiplexed i2c bus 53 [ 2.065642] pca954x 4-0070: registered 4 multiplexed busses for I2C switch pca9546 [ 2.073668] i2c i2c-6: Added multiplexed i2c bus 54 [ 2.078759] i2c i2c-6: Added multiplexed i2c bus 55 [ 2.083848] i2c i2c-6: Added multiplexed i2c bus 56 [ 2.088930] i2c i2c-6: Added multiplexed i2c bus 57 [ 2.093822] pca954x 6-0070: registered 4 multiplexed busses for I2C switch pca9546 [ 2.097504] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 2.109574] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.116751] pca954x 6-0075: probe failed [ 2.117286] hub 1-1:1.0: USB hub found [ 2.121631] silvaco-i3c-master fff10000.i3c: fclk=100000000, period_ns=10 [ 2.127755] hub 1-1:1.0: 4 ports detected [ 2.131205] silvaco-i3c-master fff10000.i3c: i3c scl_rate=3846153 [ 2.131214] silvaco-i3c-master fff10000.i3c: i2c scl_rate=384615 [ 2.147304] silvaco-i3c-master fff10000.i3c: pp_high=130, pp_low=130 [ 2.153658] silvaco-i3c-master fff10000.i3c: od_high=520, od_low=520 [ 2.160014] silvaco-i3c-master fff10000.i3c: mconfig=0x3c030c31 [ 2.166798] silvaco-i3c-master fff11000.i3c: fclk=100000000, period_ns=10 [ 2.173604] silvaco-i3c-master fff11000.i3c: i3c scl_rate=3846153 [ 2.179701] silvaco-i3c-master fff11000.i3c: i2c scl_rate=384615 [ 2.185708] silvaco-i3c-master fff11000.i3c: pp_high=130, pp_low=130 [ 2.192064] silvaco-i3c-master fff11000.i3c: od_high=520, od_low=520 [ 2.198419] silvaco-i3c-master fff11000.i3c: mconfig=0x3c030c31 [ 2.206721] silvaco-i3c-master fff12000.i3c: fclk=100000000, period_ns=10 [ 2.213533] silvaco-i3c-master fff12000.i3c: i3c scl_rate=3846153 [ 2.219630] silvaco-i3c-master fff12000.i3c: i2c scl_rate=384615 [ 2.225639] silvaco-i3c-master fff12000.i3c: pp_high=130, pp_low=130 [ 2.231994] silvaco-i3c-master fff12000.i3c: od_high=520, od_low=520 [ 2.238351] silvaco-i3c-master fff12000.i3c: mconfig=0x3c030c31 [ 2.246560] silvaco-i3c-master fff13000.i3c: fclk=100000000, period_ns=10 [ 2.253375] silvaco-i3c-master fff13000.i3c: i3c scl_rate=3846153 [ 2.259472] silvaco-i3c-master fff13000.i3c: i2c scl_rate=384615 [ 2.265478] silvaco-i3c-master fff13000.i3c: pp_high=130, pp_low=130 [ 2.271834] silvaco-i3c-master fff13000.i3c: od_high=520, od_low=520 [ 2.278190] silvaco-i3c-master fff13000.i3c: mconfig=0x3c030c31 [ 2.304059] npcm_thermal f0188000.tmps: Overheat interrupt not available [ 2.310787] npcm_thermal_probe Done [ 2.314872] npcm-wdt f000901c.watchdog: NPCM watchdog driver enabled [ 2.321637] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@...hat.com [ 2.330522] EDAC DEBUG: edac_mc_alloc: allocating 2040 bytes for mci data (1 dimms, 1 csrows/channels) [ 2.330598] EDAC DEBUG: edac_mc_add_mc_with_groups: [ 2.330653] EDAC DEBUG: edac_create_sysfs_mci_device: device mc0 created [ 2.330709] EDAC MC0: Giving out device to module npcm-edac controller npcm_ddr_controller: DEV f0824000.memory-controller (INTERRUPT) [ 2.342988] sdhci: Secure Digital Host Controller Interface driver [ 2.349172] sdhci: Copyright(c) Pierre Ossman [ 2.395120] mmc0: SDHCI controller on f0842000.sdhci [f0842000.sdhci] using ADMA [ 2.402784] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.409829] usbcore: registered new interface driver usbhid [ 2.415425] usbhid: USB HID core driver [ 2.424545] NPCM ADC driver probed [ 2.428401] optee: probing for conduit method. [ 2.432875] optee: revision 4.1 (18b424c2) [ 2.448997] optee: dynamic shared memory is enabled [ 2.458224] optee: initialized driver [ 2.463201] NET: Registered PF_INET6 protocol family [ 2.469279] Segment Routing with IPv6 [ 2.472960] In-situ OAM (IOAM) with IPv6 [ 2.477007] NET: Registered PF_PACKET protocol family [ 2.482112] Bridge firewalling registered [ 2.486129] 8021q: 802.1Q VLAN Support v1.8 [ 2.490993] pstore: Using crash dump compression: zstd [ 2.500450] clk: Disabling unused clocks [ 2.507799] Freeing unused kernel memory: 768K [ 2.512354] Run /init as init process [ 2.516036] with arguments: [ 2.516045] /init [ 2.516051] with environment: [ 2.516057] HOME=/ [ 2.516062] TERM=linux [ 2.799660] mmc0: new high speed MMC card at address 0001 [ 2.806000] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB [ 2.812023] mmcblk0boot0: mmc0:0001 AJTD4R 4.00 MiB [ 2.817644] mmcblk0boot1: mmc0:0001 AJTD4R 4.00 MiB [ 2.823094] mmcblk0rpmb: mmc0:0001 AJTD4R 4.00 MiB, chardev (246:0) [ 2.922797] jffs2: notice: (220) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 3.097282] jffs2: notice: (231) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 3.522523] jffs2: notice: (268) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 6.637574] jffs2: notice: (314) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 6.793517] overlayfs: upper fs does not support tmpfile. [ 6.814513] overlayfs: upper fs does not support RENAME_WHITEOUT. [ 14.788554] systemd[1]: System time before build time, advancing clock. [ 15.145288] systemd[1]: systemd 256.7 running in system mode (+PAM -AUDIT -SELINUX -APPARMOR -IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC -KMOD -LIBCRYPTSETUP -LIBCRYPTSETUP_PLUGINS +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON -UTMP -SYSVINIT -LIBARCHIVE) [ 15.178537] systemd[1]: Detected architecture arm64. [ 15.290812] systemd[1]: Hostname set to <>. [ 15.377422] systemd[1]: Initializing machine ID from random generator. [ 15.522255] systemd[1]: Using hardware watchdog 'npcm_wdt', version 0, device /dev/watchdog0 [ 15.530736] systemd[1]: Watchdog running with a hardware timeout of 2min 52s. [ 15.537906] systemd[1]: Watchdog: reading from /sys/dev/char/249:0/pretimeout_governor [ 15.545968] systemd[1]: Watchdog running with a pretimeout of 30s with governor 'panic'. [ 15.554079] systemd[1]: Watchdog: setting pretimeout_governor to 'panic' via '/sys/dev/char/249:0/pretimeout_governor' [ 15.907935] systemd-ssh-generator[340]: Binding SSH to AF_UNIX socket /run/ssh-unix-local/socket. [ 15.916846] systemd-ssh-generator[340]: → connect via 'ssh .host' locally [ 16.976785] systemd[1]: /usr/lib/systemd/system/gbmc-ncsi-dhcrelay.service:6: Unknown key 'LogRateLimitIntervalSec' in section [Unit], ignoring. [ 16.989808] systemd[1]: /usr/lib/systemd/system/gbmc-ncsi-dhcrelay.service:7: Unknown key 'LogRateLimitBurst' in section [Unit], ignoring. [ 17.070296] systemd[1]: /etc/systemd/system/earlyoom.service:41: Invalid address prefix is specified in [Service] IPAddressDeny=, ignoring assignment: true [ 17.180538] systemd[1]: /usr/lib/systemd/system/phosphor-ipmi-net@...cket:6: Invalid interface name, ignoring: sys-subsystem-net-devices-%i.device [ 17.273954] systemd[1]: Queued start job for default target Multi-User System. [ 17.296302] systemd[1]: Created slice Slice /system/gbmc-br-dhcp. [ 17.320196] systemd[1]: Created slice Slice /system/getty. [ 17.344320] systemd[1]: Created slice Slice /system/hostlogger. [ 17.368276] systemd[1]: Created slice Slice /system/mapper-wait. [ 17.392149] systemd[1]: Created slice Slice /system/modprobe. [ 17.416047] systemd[1]: Created slice Slice /system/ncsid. [ 17.440031] systemd[1]: Created slice Slice /system/obmc-console. [ 17.464107] systemd[1]: Created slice Slice /system/obmc-led-group-start. [ 17.492381] systemd[1]: Created slice Slice /system/phosphor-certificate-manager. [ 17.520131] systemd[1]: Created slice Slice /system/phosphor-ipmi-kcs. [ 17.548118] systemd[1]: Created slice Slice /system/phosphor-ipmi-net. [ 17.576080] systemd[1]: Created slice Slice /system/phosphor-watchdog. [ 17.604106] systemd[1]: Created slice Slice /system/serial-getty. [ 17.628059] systemd[1]: Created slice Slice /system/xyz.openbmc_project.Chassis.Control.Power. [ 17.656079] systemd[1]: Created slice Slice /system/xyz.openbmc_project.State.Boot.PostCode. [ 17.681689] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 17.709560] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 17.733366] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... [ 17.757304] systemd[1]: Reached target Firmware Update Preconditions. [ 17.781321] systemd[1]: Reached target Firmware Updates and Configuration. [ 17.805443] systemd[1]: Reached target MCTP local network configuration. [ 17.829504] systemd[1]: Reached target Path Units. [ 17.849346] systemd[1]: Reached target Remote File Systems. [ 17.869309] systemd[1]: Reached target Slice Units. [ 17.889371] systemd[1]: Reached target Swaps. [ 17.910153] systemd[1]: Listening on Syslog Socket. [ 17.938887] systemd[1]: Listening on Process Core Dump Socket. [ 17.967501] systemd[1]: Listening on Credential Encryption/Decryption. [ 18.819284] systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit). [ 18.830798] systemd[1]: Listening on Journal Socket (/dev/log). [ 18.853909] systemd[1]: Listening on Journal Sockets. [ 18.873825] systemd[1]: Listening on DDI File System Mounter Socket. [ 18.898045] systemd[1]: Listening on Network Service Netlink Socket. [ 18.921698] systemd[1]: Listening on Namespace Resource Manager Socket. [ 18.945839] systemd[1]: Listening on udev Control Socket. [ 18.965669] systemd[1]: Listening on udev Kernel Socket. [ 18.985933] systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 19.047148] systemd[1]: Mounting POSIX Message Queue File System... [ 19.073357] systemd[1]: Mounting Kernel Debug File System... [ 19.097377] systemd[1]: Mounting Kernel Trace File System... [ 19.124639] systemd[1]: Mounting Temporary Directory /tmp... [ 19.154283] systemd[1]: Starting Load Kernel Module configfs... [ 19.183745] systemd[1]: Starting Load Kernel Module fuse... [ 19.206979] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). [ 19.221109] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 19.234045] systemd[1]: systemd-journald.service: (This warning is only shown for the first unit using IP firewalling.) [ 19.249106] systemd[1]: Starting Journal Service... [ 19.274375] systemd[1]: Starting Generate network units from Kernel command line... [ 19.306633] systemd[1]: Starting Remount Root and Kernel File Systems... [ 19.338893] systemd[1]: Starting Apply Kernel Variables... [ 19.374305] systemd[1]: Starting Wait Until Kernel Time Synchronized... [ 19.406516] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... [ 19.446876] systemd[1]: Starting Load udev Rules from Credentials... [ 19.478954] systemd[1]: Starting Coldplug All udev Devices... [ 19.522334] systemd[1]: Mounted POSIX Message Queue File System. [ 19.546286] systemd[1]: Mounted Kernel Debug File System. [ 19.574137] systemd[1]: Mounted Kernel Trace File System. [ 19.599232] systemd[1]: Mounted Temporary Directory /tmp. [ 19.622961] systemd[1]: modprobe@...figfs.service: Deactivated successfully. [ 19.630986] systemd[1]: Finished Load Kernel Module configfs. [ 19.654904] systemd[1]: modprobe@...e.service: Deactivated successfully. [ 19.662537] systemd[1]: Finished Load Kernel Module fuse. [ 19.679870] systemd-journald[350]: Collecting audit messages is disabled. [ 19.689057] systemd[1]: Finished Generate network units from Kernel command line. [ 19.719163] systemd[1]: Finished Remount Root and Kernel File Systems. [ 19.749658] systemd[1]: Finished Apply Kernel Variables. [ 19.775387] systemd[1]: FUSE Control File System was skipped because of an unmet condition check (ConditionPathExists=/sys/fs/fuse/connections). [ 19.805866] systemd[1]: Mounting Kernel Configuration File System... [ 19.929057] systemd[1]: Starting Rebuild Hardware Database... [ 19.954052] systemd[1]: Started Journal Service. [ 20.160087] systemd-journald[350]: Received client request to flush runtime journal. [ 101.328277] spi-nor spi1.0: mx66l51235f (65536 Kbytes) [ 101.333498] NPCM-FIU c0000000.spi: Reserved memory not defined, direct read disabled [ 101.341284] NPCM-FIU c0000000.spi: Reserved memory not defined, direct read disabled [ 105.467744] stmmaceth f0804000.eth eth0: PHY [stmmac-0:01] driver [Broadcom BCM54612E] (irq=POLL) [ 105.476908] stmmaceth f0804000.eth eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 105.484768] stmmaceth f0804000.eth eth0: No Safety Features support found [ 105.501690] stmmaceth f0804000.eth eth0: IEEE 1588-2002 Timestamp supported [ 105.511504] stmmaceth f0804000.eth eth0: configuring for phy/rgmii-id link mode [ 105.527446] stmmaceth f0806000.eth eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 105.546200] stmmaceth f0806000.eth eth1: No Safety Features support found [ 105.563100] stmmaceth f0806000.eth eth1: IEEE 1588-2002 Timestamp supported [ 105.610354] stmmaceth f0806000.eth eth1: configuring for fixed/rmii link mode [ 105.619019] stmmaceth f0806000.eth eth1: Link is Up - 100Mbps/Full - flow control off [ 105.619626] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 105.650734] gbmcbr: port 1(gbmcbrdummy) entered blocking state [ 105.657037] gbmcbr: port 1(gbmcbrdummy) entered disabled state [ 105.663470] device gbmcbrdummy entered promiscuous mode [ 105.702007] gbmcbr: port 2(gbmcbrncsidhcp) entered blocking state [ 105.708709] gbmcbr: port 2(gbmcbrncsidhcp) entered disabled state [ 105.716385] device gbmcbrncsidhcp entered promiscuous mode [ 105.857367] gbmcbr: port 1(gbmcbrdummy) entered blocking state [ 105.863241] gbmcbr: port 1(gbmcbrdummy) entered forwarding state [ 105.869585] IPv6: ADDRCONF(NETDEV_CHANGE): gbmcbr: link becomes ready [ 105.904233] IPv6: ADDRCONF(NETDEV_CHANGE): gbmcbrncsidhcp: link becomes ready [ 105.911647] gbmcbr: port 2(gbmcbrncsidhcp) entered blocking state [ 105.917818] gbmcbr: port 2(gbmcbrncsidhcp) entered forwarding state [ 105.924434] IPv6: ADDRCONF(NETDEV_CHANGE): gbmcncsidhcp: link becomes ready [ 106.186370] device eth1 entered promiscuous mode [ 106.385695] Deleting MTD partitions on "bios": [ 109.719287] stmmaceth f0804000.eth eth0: Link is Up - 1Gbps/Full - flow control off [ 109.719309] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 114.741084] i2c i2c-52: new_device: Instantiated device q50sn12072 at 0x65 [ 114.744278] i2c i2c-57: new_device: Instantiated device max31790 at 0x2f [ 114.760706] i2c i2c-6: new_device: Instantiated device q50sn12072 at 0x60 [ 114.937470] i2c i2c-6: Added multiplexed i2c bus 58 [ 114.937950] i2c i2c-6: Added multiplexed i2c bus 59 [ 114.938321] i2c i2c-6: Added multiplexed i2c bus 60 [ 114.938639] i2c i2c-6: Added multiplexed i2c bus 61 [ 114.938659] pca954x 6-0075: registered 4 multiplexed busses for I2C switch pca9546 [ 116.003953] using random self ethernet address [ 116.003972] using random host ethernet address [ 116.018754] usb0: HOST MAC fe:bd:17:28:df:13 [ 116.018786] usb0: MAC a6:35:f8:eb:09:62 [ 116.018830] npcm-udc: bind to driver configfs-gadget [ 116.034209] configfs-gadget gadget gusbem0: renamed from usb0 [ 116.120858] gbmcbr: port 3(gusbem0) entered blocking state [ 116.120892] gbmcbr: port 3(gusbem0) entered disabled state [ 116.121315] device gusbem0 entered promiscuous mode [ 116.822193] lm75 6-005d: supply vs not found, using dummy regulator [ 116.826572] hwmon hwmon7: temp1_input not attached to any thermal zone [ 116.826609] lm75 6-005d: hwmon7: sensor 'max31725' [ 116.826706] i2c i2c-6: new_device: Instantiated device max31725 at 0x5d [ 116.828003] lm75 50-0054: supply vs not found, using dummy regulator [ 116.833729] hwmon hwmon8: temp1_input not attached to any thermal zone [ 116.833763] lm75 50-0054: hwmon8: sensor 'max31725' [ 116.833860] i2c i2c-50: new_device: Instantiated device max31725 at 0x54 [ 116.836699] lm75 51-0055: supply vs not found, using dummy regulator [ 116.838007] hwmon hwmon9: temp1_input not attached to any thermal zone [ 116.838038] lm75 51-0055: hwmon9: sensor 'max31725' [ 116.838147] i2c i2c-51: new_device: Instantiated device max31725 at 0x55 [ 117.975811] i2c i2c-6: delete_device: Deleting device q50sn12072 at 0x60 [ 117.998683] i2c i2c-6: new_device: Instantiated device q50sn12072 at 0x60 [ 118.366798] i2c i2c-5: new_device: Instantiated device adm1266 at 0x42 [ 118.368059] i2c i2c-52: delete_device: Deleting device q50sn12072 at 0x65 [ 118.386026] i2c i2c-52: new_device: Instantiated device q50sn12072 at 0x65 [ 118.387166] i2c i2c-56: new_device: Instantiated device tps53685 at 0x74 [ 118.387444] i2c i2c-56: delete_device: Deleting device tps53685 at 0x74 [ 118.388540] i2c i2c-54: new_device: Instantiated device tps53685 at 0x76 [ 118.388780] i2c i2c-54: delete_device: Deleting device tps53685 at 0x76 [ 118.390007] i2c i2c-55: new_device: Instantiated device tps53685 at 0x72 [ 118.390283] i2c i2c-55: delete_device: Deleting device tps53685 at 0x72 [ 118.771235] i2c i2c-56: new_device: Instantiated device tps53685 at 0x74 [ 118.771530] i2c i2c-56: delete_device: Deleting device tps53685 at 0x74 [ 118.772819] i2c i2c-54: new_device: Instantiated device tps53685 at 0x76 [ 118.773096] i2c i2c-54: delete_device: Deleting device tps53685 at 0x76 [ 118.774982] i2c i2c-55: new_device: Instantiated device tps53685 at 0x72 [ 118.775355] i2c i2c-55: delete_device: Deleting device tps53685 at 0x72 [ 118.876305] i2c i2c-56: new_device: Instantiated device tps53685 at 0x74 [ 118.876606] i2c i2c-56: delete_device: Deleting device tps53685 at 0x74 [ 118.878229] i2c i2c-54: new_device: Instantiated device tps53685 at 0x76 [ 118.878535] i2c i2c-54: delete_device: Deleting device tps53685 at 0x76 [ 118.879826] i2c i2c-55: new_device: Instantiated device tps53685 at 0x72 [ 118.880225] i2c i2c-55: delete_device: Deleting device tps53685 at 0x72 [ 231.873217] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 232.544299] systemd-journald[350]: Received client request to flush runtime journal. [ 448.921441] IPv6: ADDRCONF(NETDEV_CHANGE): gusbem0: link becomes ready [ 448.921651] gbmcbr: port 3(gusbem0) entered blocking state [ 448.921671] gbmcbr: port 3(gusbem0) entered forwarding state [ 471.932939] silvaco-i3c-master fff10000.i3c: fclk=100000000, period_ns=10 [ 471.932967] silvaco-i3c-master fff10000.i3c: i3c scl_rate=3846153 [ 471.932977] silvaco-i3c-master fff10000.i3c: i2c scl_rate=384615 [ 471.932985] silvaco-i3c-master fff10000.i3c: pp_high=130, pp_low=130 [ 471.932995] silvaco-i3c-master fff10000.i3c: od_high=520, od_low=520 [ 471.933005] silvaco-i3c-master fff10000.i3c: mconfig=0x3c030c31 [ 471.942884] hwmon hwmon11: temp1_input not attached to any thermal zone [ 471.943095] sbtsi_i3c 0-22400000001: register apml_tsi0 device [ 471.943841] I3C SBRMI_REV command returned value: 32 [ 471.968567] sbrmi_i3c 0-22400000002: register apml_rmi0 device [ 472.055177] i2c i2c-56: new_device: Instantiated device tps53685 at 0x74 [ 472.055412] i2c i2c-56: delete_device: Deleting device tps53685 at 0x74 [ 472.056497] i2c i2c-54: new_device: Instantiated device tps53685 at 0x76 [ 472.056764] i2c i2c-54: delete_device: Deleting device tps53685 at 0x76 [ 472.058110] i2c i2c-55: new_device: Instantiated device tps53685 at 0x72 [ 472.058397] i2c i2c-55: delete_device: Deleting device tps53685 at 0x72 [ 475.001946] gbmcbr: port 3(gusbem0) entered disabled state [ 488.004114] i2c i2c-56: new_device: Instantiated device tps53685 at 0x74 [ 488.004424] i2c i2c-56: delete_device: Deleting device tps53685 at 0x74 [ 488.016698] i2c i2c-54: new_device: Instantiated device tps53685 at 0x76 [ 488.017029] i2c i2c-54: delete_device: Deleting device tps53685 at 0x76 [ 488.024280] i2c i2c-55: new_device: Instantiated device tps53685 at 0x72 [ 488.024671] i2c i2c-55: delete_device: Deleting device tps53685 at 0x72 [ 563.677058] gbmcbr: port 3(gusbem0) entered blocking state [ 563.677081] gbmcbr: port 3(gusbem0) entered forwarding state Best Regards, Brian Chiang
Powered by blists - more mailing lists