linux-kernel - Re: [PATCH v1] arm64: dts: imx8qm: add ethernet aliases

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <16a98816-f43c-4f4d-940e-9da30cb1f73f@kernel.org>
Date: Fri, 25 Apr 2025 18:36:22 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Francesco Dolcini <francesco@...cini.it>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
 Sascha Hauer <s.hauer@...gutronix.de>,
 Pengutronix Kernel Team <kernel@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>
Cc: Francesco Dolcini <francesco.dolcini@...adex.com>,
 devicetree@...r.kernel.org, imx@...ts.linux.dev,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1] arm64: dts: imx8qm: add ethernet aliases

On 22/04/2025 12:02, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@...adex.com>
> 
> Add ethernet aliases, they are used by the firmware to set the MAC
> address and by systemd to rename network interfaces to predictable
> interface names, e.g. end0 and end1.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@...adex.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> index 6fa31bc9ece8..eccd0087efa7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> @@ -17,6 +17,8 @@ / {
>  	#size-cells = <2>;
>  
>  	aliases {
> +		ethernet0 = &fec1;
> +		ethernet1 = &fec2;
Can't they be disabled (e.g. because MAC is external?) on actual board?
IOW, aliases for exposed interfaces are properties of boards, not SoC.

What's more, I cannot find these in this DTSI, so how can you add alias
to non-existing node?

Best regards,
Krzysztof