linux-kernel - [PATCH v3 2/2] arm64: dts: ti: k3-am62p*/k3-j722s: Add bootph-all property to enable Ethernet boot

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250425051055.2393301-3-c-vankar@ti.com>
Date: Fri, 25 Apr 2025 10:40:55 +0530
From: Chintan Vankar <c-vankar@...com>
To: Conor Dooley <conor+dt@...nel.org>,
        Krzysztof Kozlowski
	<krzk+dt@...nel.org>,
        Rob Herring <robh@...nel.org>, Tero Kristo
	<kristo@...nel.org>,
        Vignesh Raghavendra <vigneshr@...com>, Nishanth Menon
	<nm@...com>
CC: <srk@...com>, <s-vadapalli@...com>, <danishanwar@...com>,
        <c-vankar@...com>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
        Roger
 Quadros <rogerq@...nel.org>
Subject: [PATCH v3 2/2] arm64: dts: ti: k3-am62p*/k3-j722s: Add bootph-all property to enable Ethernet boot

Ethernet boot requires CPSW nodes to be present starting from R5 SPL
stage. Add bootph-all property to required nodes to enable Ethernet boot
for AM62P5-SK and J722S-EVM.

Reviewed-by: Roger Quadros <rogerq@...nel.org>
Signed-off-by: Chintan Vankar <c-vankar@...com>
---

Link to v2:
https://lore.kernel.org/r/20250302153502.181832-3-c-vankar@ti.com/

Changes from v2 to v3:
- No changes.

 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 +++
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts                | 2 ++
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts                | 3 +++
 3 files changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 7b65538110e8..11f484f88603 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -50,6 +50,7 @@ phy_gmii_sel: phy@...4 {
 			compatible = "ti,am654-phy-gmii-sel";
 			reg = <0x4044 0x8>;
 			#phy-cells = <1>;
+			bootph-all;
 		};
 
 		epwm_tbclk: clock-controller@...0 {
@@ -730,6 +731,7 @@ cpsw_port1: port@1 {
 				mac-address = [00 00 00 00 00 00];
 				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
 				status = "disabled";
+				bootph-all;
 			};
 
 			cpsw_port2: port@2 {
@@ -751,6 +753,7 @@ cpsw3g_mdio: mdio@f00 {
 			clock-names = "fck";
 			bus_freq = <1000000>;
 			status = "disabled";
+			bootph-all;
 		};
 
 		cpts@...00 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index d29f524600af..5b2f0945a9eb 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -227,6 +227,7 @@ main_mdio1_pins_default: main-mdio1-default-pins {
 			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
 			AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	main_mmc1_pins_default: main-mmc1-default-pins {
@@ -496,6 +497,7 @@ &cpsw3g_mdio {
 
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 34b9d190800e..93d770c5792e 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -310,6 +310,7 @@ mdio_pins_default: mdio-default-pins {
 			J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
 			J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
@@ -344,6 +345,7 @@ J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */
 			J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
 			J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	main_usb1_pins_default: main-usb1-default-pins {
@@ -388,6 +390,7 @@ &cpsw3g_mdio {
 
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
-- 
2.34.1