| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250425-fp5-pmic-glink-dp-v3-4-cc9c2aeb42fb@fairphone.com>
Date: Fri, 25 Apr 2025 09:08:15 +0200
From: Luca Weiss <luca.weiss@...rphone.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>,
Conor Dooley <conor+dt@...nel.org>, cros-qcom-dts-watchers@...omium.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
linux-usb@...r.kernel.org, Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH v3 4/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up
DisplayPort over USB-C
Extend the USB graph to connect the OCP96011 switch, the PTN36502
redriver, the USB controllers and the MDSS, so that DisplayPort over
USB-C is working.
Connect some parts of the graph directly in the SoC dtsi since those
parts are wired up like this in the SoC directly.
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 54 ++++++++++++++++++++--
arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 +++-
2 files changed, 57 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index e0470be9142caa4bac4285a191725bbd60e706fa..9e8f9fb57c4723a24704a8239a86c6081910916b 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -101,7 +101,15 @@ port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
- remote-endpoint = <&usb_1_dwc3_ss>;
+ remote-endpoint = <&redriver_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu: endpoint {
+ remote-endpoint = <&ocp96011_sbu_mux>;
};
};
};
@@ -761,6 +769,13 @@ typec-mux@42 {
mode-switch;
orientation-switch;
+
+ port {
+ ocp96011_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu>;
+ data-lanes = <1 0>;
+ };
+ };
};
/* AW86927FCR haptics @ 5a */
@@ -784,6 +799,27 @@ typec-mux@1a {
retimer-switch;
orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ redriver_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ redriver_ss_in: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_out>;
+ };
+ };
+ };
};
};
@@ -805,6 +841,14 @@ &mdss {
status = "okay";
};
+&mdss_dp {
+ status = "okay";
+};
+
+&mdss_dp_out {
+ data-lanes = <0 1>;
+};
+
&mdss_dsi {
vdda-supply = <&vreg_l6b>;
status = "okay";
@@ -1301,10 +1345,6 @@ &usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
-&usb_1_dwc3_ss {
- remote-endpoint = <&pmic_glink_ss_in>;
-};
-
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l10c>;
vdda18-supply = <&vreg_l1c>;
@@ -1331,6 +1371,10 @@ &usb_1_qmpphy {
status = "okay";
};
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&redriver_ss_in>;
+};
+
&venus {
firmware-name = "qcom/qcm6490/fairphone5/venus.mbn";
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 8e86d75cc6b4929f6cf9592a3f1ae591a19e6d78..ea87bf360ca0ac723e1dcd8ec263d0ca9a96f02e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3640,6 +3640,8 @@ usb_1_qmpphy: phy@...8000 {
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -3655,6 +3657,7 @@ port@1 {
reg = <1>;
usb_dp_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
};
};
@@ -3662,6 +3665,7 @@ port@2 {
reg = <2>;
usb_dp_qmpphy_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp_out>;
};
};
};
@@ -4268,6 +4272,7 @@ port@1 {
reg = <1>;
usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
};
};
};
@@ -4993,7 +4998,9 @@ dp_in: endpoint {
port@1 {
reg = <1>;
- mdss_dp_out: endpoint { };
+ mdss_dp_out: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+ };
};
};
--
2.49.0
Powered by blists - more mailing lists