| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250425084216.3913608-11-mingo@kernel.org>
Date: Fri, 25 Apr 2025 10:42:07 +0200
From: Ingo Molnar <mingo@...nel.org>
To: linux-kernel@...r.kernel.org
Cc: Ingo Molnar <mingo@...nel.org>,
"Ahmed S . Darwish" <darwi@...utronix.de>,
Andrew Cooper <andrew.cooper3@...rix.com>,
Ard Biesheuvel <ardb@...nel.org>,
Arnd Bergmann <arnd@...nel.org>,
Borislav Petkov <bp@...en8.de>,
Dave Hansen <dave.hansen@...ux.intel.com>,
"H . Peter Anvin" <hpa@...or.com>,
John Ogness <john.ogness@...utronix.de>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Peter Zijlstra <peterz@...radead.org>,
Thomas Gleixner <tglx@...utronix.de>
Subject: [PATCH 10/15] x86/fpu: Remove the math-emu/ FPU emulation library
Now that all enabling code is gone, remove the
FPU emulation library.
Signed-off-by: Ingo Molnar <mingo@...nel.org>
---
arch/x86/math-emu/Makefile | 30 -
arch/x86/math-emu/README | 427 ----------
arch/x86/math-emu/control_w.h | 46 --
arch/x86/math-emu/div_Xsig.S | 367 ---------
arch/x86/math-emu/div_small.S | 48 --
arch/x86/math-emu/errors.c | 686 ----------------
arch/x86/math-emu/exception.h | 51 --
arch/x86/math-emu/fpu_arith.c | 153 ----
arch/x86/math-emu/fpu_asm.h | 32 -
arch/x86/math-emu/fpu_aux.c | 267 ------
arch/x86/math-emu/fpu_emu.h | 218 -----
arch/x86/math-emu/fpu_entry.c | 718 -----------------
arch/x86/math-emu/fpu_etc.c | 136 ----
arch/x86/math-emu/fpu_proto.h | 157 ----
arch/x86/math-emu/fpu_system.h | 130 ---
arch/x86/math-emu/fpu_tags.c | 116 ---
arch/x86/math-emu/fpu_trig.c | 1649 --------------------------------------
arch/x86/math-emu/get_address.c | 401 ---------
arch/x86/math-emu/load_store.c | 322 --------
arch/x86/math-emu/mul_Xsig.S | 179 -----
arch/x86/math-emu/poly.h | 115 ---
arch/x86/math-emu/poly_2xm1.c | 146 ----
arch/x86/math-emu/poly_atan.c | 209 -----
arch/x86/math-emu/poly_l2.c | 245 ------
arch/x86/math-emu/poly_sin.c | 379 ---------
arch/x86/math-emu/poly_tan.c | 213 -----
arch/x86/math-emu/polynom_Xsig.S | 137 ----
arch/x86/math-emu/reg_add_sub.c | 334 --------
arch/x86/math-emu/reg_compare.c | 479 -----------
arch/x86/math-emu/reg_constant.c | 123 ---
arch/x86/math-emu/reg_constant.h | 26 -
arch/x86/math-emu/reg_convert.c | 47 --
arch/x86/math-emu/reg_divide.c | 183 -----
arch/x86/math-emu/reg_ld_str.c | 1220 ----------------------------
arch/x86/math-emu/reg_mul.c | 116 ---
arch/x86/math-emu/reg_norm.S | 150 ----
arch/x86/math-emu/reg_round.S | 711 ----------------
arch/x86/math-emu/reg_u_add.S | 169 ----
arch/x86/math-emu/reg_u_div.S | 474 -----------
arch/x86/math-emu/reg_u_mul.S | 150 ----
arch/x86/math-emu/reg_u_sub.S | 274 -------
arch/x86/math-emu/round_Xsig.S | 142 ----
arch/x86/math-emu/shr_Xsig.S | 89 --
arch/x86/math-emu/status_w.h | 68 --
arch/x86/math-emu/version.h | 12 -
arch/x86/math-emu/wm_shrx.S | 207 -----
arch/x86/math-emu/wm_sqrt.S | 472 -----------
47 files changed, 13023 deletions(-)
diff --git a/arch/x86/math-emu/Makefile b/arch/x86/math-emu/Makefile
deleted file mode 100644
index 02211fc6f2ec..000000000000
--- a/arch/x86/math-emu/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for wm-FPU-emu
-#
-
-#DEBUG = -DDEBUGGING
-DEBUG =
-PARANOID = -DPARANOID
-ccflags-y += $(PARANOID) $(DEBUG) -fno-builtin $(MATH_EMULATION)
-asflags-y += $(PARANOID)
-
-# From 'C' language sources:
-C_OBJS =fpu_entry.o errors.o \
- fpu_arith.o fpu_aux.o fpu_etc.o fpu_tags.o fpu_trig.o \
- load_store.o get_address.o \
- poly_atan.o poly_l2.o poly_2xm1.o poly_sin.o poly_tan.o \
- reg_add_sub.o reg_compare.o reg_constant.o reg_convert.o \
- reg_ld_str.o reg_divide.o reg_mul.o
-
-# From 80x86 assembler sources:
-A_OBJS =reg_u_add.o reg_u_div.o reg_u_mul.o reg_u_sub.o \
- div_small.o reg_norm.o reg_round.o \
- wm_shrx.o wm_sqrt.o \
- div_Xsig.o polynom_Xsig.o round_Xsig.o \
- shr_Xsig.o mul_Xsig.o
-
-obj-y =$(C_OBJS) $(A_OBJS)
-
-proto:
- cproto -e -DMAKING_PROTO *.c >fpu_proto.h
diff --git a/arch/x86/math-emu/README b/arch/x86/math-emu/README
deleted file mode 100644
index e6235491d6eb..000000000000
--- a/arch/x86/math-emu/README
+++ /dev/null
@@ -1,427 +0,0 @@
- +---------------------------------------------------------------------------+
- | wm-FPU-emu an FPU emulator for 80386 and 80486SX microprocessors. |
- | |
- | Copyright (C) 1992,1993,1994,1995,1996,1997,1999 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...bpc.org.au |
- | |
- | This program is free software; you can redistribute it and/or modify |
- | it under the terms of the GNU General Public License version 2 as |
- | published by the Free Software Foundation. |
- | |
- | This program is distributed in the hope that it will be useful, |
- | but WITHOUT ANY WARRANTY; without even the implied warranty of |
- | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
- | GNU General Public License for more details. |
- | |
- | You should have received a copy of the GNU General Public License |
- | along with this program; if not, write to the Free Software |
- | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
- | |
- +---------------------------------------------------------------------------+
-
-
-
-wm-FPU-emu is an FPU emulator for Linux. It is derived from wm-emu387
-which was my 80387 emulator for early versions of djgpp (gcc under
-msdos); wm-emu387 was in turn based upon emu387 which was written by
-DJ Delorie for djgpp. The interface to the Linux kernel is based upon
-the original Linux math emulator by Linus Torvalds.
-
-My target FPU for wm-FPU-emu is that described in the Intel486
-Programmer's Reference Manual (1992 edition). Unfortunately, numerous
-facets of the functioning of the FPU are not well covered in the
-Reference Manual. The information in the manual has been supplemented
-with measurements on real 80486's. Unfortunately, it is simply not
-possible to be sure that all of the peculiarities of the 80486 have
-been discovered, so there is always likely to be obscure differences
-in the detailed behaviour of the emulator and a real 80486.
-
-wm-FPU-emu does not implement all of the behaviour of the 80486 FPU,
-but is very close. See "Limitations" later in this file for a list of
-some differences.
-
-Please report bugs, etc to me at:
- billm@...bpc.org.au
-or b.metzenthen@...oto.unimelb.edu.au
-
-For more information on the emulator and on floating point topics, see
-my web pages, currently at http://www.suburbia.net/~billm/
-
-
---Bill Metzenthen
- December 1999
-
-
------------------------ Internals of wm-FPU-emu -----------------------
-
-Numeric algorithms:
-(1) Add, subtract, and multiply. Nothing remarkable in these.
-(2) Divide has been tuned to get reasonable performance. The algorithm
- is not the obvious one which most people seem to use, but is designed
- to take advantage of the characteristics of the 80386. I expect that
- it has been invented many times before I discovered it, but I have not
- seen it. It is based upon one of those ideas which one carries around
- for years without ever bothering to check it out.
-(3) The sqrt function has been tuned to get good performance. It is based
- upon Newton's classic method. Performance was improved by capitalizing
- upon the properties of Newton's method, and the code is once again
- structured taking account of the 80386 characteristics.
-(4) The trig, log, and exp functions are based in each case upon quasi-
- "optimal" polynomial approximations. My definition of "optimal" was
- based upon getting good accuracy with reasonable speed.
-(5) The argument reducing code for the trig function effectively uses
- a value of pi which is accurate to more than 128 bits. As a consequence,
- the reduced argument is accurate to more than 64 bits for arguments up
- to a few pi, and accurate to more than 64 bits for most arguments,
- even for arguments approaching 2^63. This is far superior to an
- 80486, which uses a value of pi which is accurate to 66 bits.
-
-The code of the emulator is complicated slightly by the need to
-account for a limited form of re-entrancy. Normally, the emulator will
-emulate each FPU instruction to completion without interruption.
-However, it may happen that when the emulator is accessing the user
-memory space, swapping may be needed. In this case the emulator may be
-temporarily suspended while disk i/o takes place. During this time
-another process may use the emulator, thereby perhaps changing static
-variables. The code which accesses user memory is confined to five
-files:
- fpu_entry.c
- reg_ld_str.c
- load_store.c
- get_address.c
- errors.c
-As from version 1.12 of the emulator, no static variables are used
-(apart from those in the kernel's per-process tables). The emulator is
-therefore now fully re-entrant, rather than having just the restricted
-form of re-entrancy which is required by the Linux kernel.
-
------------------------ Limitations of wm-FPU-emu -----------------------
-
-There are a number of differences between the current wm-FPU-emu
-(version 2.01) and the 80486 FPU (apart from bugs). The differences
-are fewer than those which applied to the 1.xx series of the emulator.
-Some of the more important differences are listed below:
-
-The Roundup flag does not have much meaning for the transcendental
-functions and its 80486 value with these functions is likely to differ
-from its emulator value.
-
-In a few rare cases the Underflow flag obtained with the emulator will
-be different from that obtained with an 80486. This occurs when the
-following conditions apply simultaneously:
-(a) the operands have a higher precision than the current setting of the
- precision control (PC) flags.
-(b) the underflow exception is masked.
-(c) the magnitude of the exact result (before rounding) is less than 2^-16382.
-(d) the magnitude of the final result (after rounding) is exactly 2^-16382.
-(e) the magnitude of the exact result would be exactly 2^-16382 if the
- operands were rounded to the current precision before the arithmetic
- operation was performed.
-If all of these apply, the emulator will set the Underflow flag but a real
-80486 will not.
-
-NOTE: Certain formats of Extended Real are UNSUPPORTED. They are
-unsupported by the 80486. They are the Pseudo-NaNs, Pseudoinfinities,
-and Unnormals. None of these will be generated by an 80486 or by the
-emulator. Do not use them. The emulator treats them differently in
-detail from the way an 80486 does.
-
-Self modifying code can cause the emulator to fail. An example of such
-code is:
- movl %esp,[%ebx]
- fld1
-The FPU instruction may be (usually will be) loaded into the pre-fetch
-queue of the CPU before the mov instruction is executed. If the
-destination of the 'movl' overlaps the FPU instruction then the bytes
-in the prefetch queue and memory will be inconsistent when the FPU
-instruction is executed. The emulator will be invoked but will not be
-able to find the instruction which caused the device-not-present
-exception. For this case, the emulator cannot emulate the behaviour of
-an 80486DX.
-
-Handling of the address size override prefix byte (0x67) has not been
-extensively tested yet. A major problem exists because using it in
-vm86 mode can cause a general protection fault. Address offsets
-greater than 0xffff appear to be illegal in vm86 mode but are quite
-acceptable (and work) in real mode. A small test program developed to
-check the addressing, and which runs successfully in real mode,
-crashes dosemu under Linux and also brings Windows down with a general
-protection fault message when run under the MS-DOS prompt of Windows
-3.1. (The program simply reads data from a valid address).
-
-The emulator supports 16-bit protected mode, with one difference from
-an 80486DX. A 80486DX will allow some floating point instructions to
-write a few bytes below the lowest address of the stack. The emulator
-will not allow this in 16-bit protected mode: no instructions are
-allowed to write outside the bounds set by the protection.
-
------------------------ Performance of wm-FPU-emu -----------------------
-
-Speed.
------
-
-The speed of floating point computation with the emulator will depend
-upon instruction mix. Relative performance is best for the instructions
-which require most computation. The simple instructions are adversely
-affected by the FPU instruction trap overhead.
-
-
-Timing: Some simple timing tests have been made on the emulator functions.
-The times include load/store instructions. All times are in microseconds
-measured on a 33MHz 386 with 64k cache. The Turbo C tests were under
-ms-dos, the next two columns are for emulators running with the djgpp
-ms-dos extender. The final column is for wm-FPU-emu in Linux 0.97,
-using libm4.0 (hard).
-
-function Turbo C djgpp 1.06 WM-emu387 wm-FPU-emu
-
- + 60.5 154.8 76.5 139.4
- - 61.1-65.5 157.3-160.8 76.2-79.5 142.9-144.7
- * 71.0 190.8 79.6 146.6
- / 61.2-75.0 261.4-266.9 75.3-91.6 142.2-158.1
-
- sin() 310.8 4692.0 319.0 398.5
- cos() 284.4 4855.2 308.0 388.7
- tan() 495.0 8807.1 394.9 504.7
- atan() 328.9 4866.4 601.1 419.5-491.9
-
- sqrt() 128.7 crashed 145.2 227.0
- log() 413.1-419.1 5103.4-5354.21 254.7-282.2 409.4-437.1
- exp() 479.1 6619.2 469.1 850.8
-
-
-The performance under Linux is improved by the use of look-ahead code.
-The following results show the improvement which is obtained under
-Linux due to the look-ahead code. Also given are the times for the
-original Linux emulator with the 4.1 'soft' lib.
-
- [ Linus' note: I changed look-ahead to be the default under linux, as
- there was no reason not to use it after I had edited it to be
- disabled during tracing ]
-
- wm-FPU-emu w original w
- look-ahead 'soft' lib
- + 106.4 190.2
- - 108.6-111.6 192.4-216.2
- * 113.4 193.1
- / 108.8-124.4 700.1-706.2
-
- sin() 390.5 2642.0
- cos() 381.5 2767.4
- tan() 496.5 3153.3
- atan() 367.2-435.5 2439.4-3396.8
-
- sqrt() 195.1 4732.5
- log() 358.0-387.5 3359.2-3390.3
- exp() 619.3 4046.4
-
-
-These figures are now somewhat out-of-date. The emulator has become
-progressively slower for most functions as more of the 80486 features
-have been implemented.
-
-
------------------------ Accuracy of wm-FPU-emu -----------------------
-
-
-The accuracy of the emulator is in almost all cases equal to or better
-than that of an Intel 80486 FPU.
-
-The results of the basic arithmetic functions (+,-,*,/), and fsqrt
-match those of an 80486 FPU. They are the best possible; the error for
-these never exceeds 1/2 an lsb. The fprem and fprem1 instructions
-return exact results; they have no error.
-
-
-The following table compares the emulator accuracy for the sqrt(),
-trig and log functions against the Turbo C "emulator". For this table,
-each function was tested at about 400 points. Ideal worst-case results
-would be 64 bits. The reduced Turbo C accuracy of cos() and tan() for
-arguments greater than pi/4 can be thought of as being related to the
-precision of the argument x; e.g. an argument of pi/2-(1e-10) which is
-accurate to 64 bits can result in a relative accuracy in cos() of
-about 64 + log2(cos(x)) = 31 bits.
-
-
-Function Tested x range Worst result Turbo C
- (relative bits)
-
-sqrt(x) 1 .. 2 64.1 63.2
-atan(x) 1e-10 .. 200 64.2 62.8
-cos(x) 0 .. pi/2-(1e-10) 64.4 (x <= pi/4) 62.4
- 64.1 (x = pi/2-(1e-10)) 31.9
-sin(x) 1e-10 .. pi/2 64.0 62.8
-tan(x) 1e-10 .. pi/2-(1e-10) 64.0 (x <= pi/4) 62.1
- 64.1 (x = pi/2-(1e-10)) 31.9
-exp(x) 0 .. 1 63.1 ** 62.9
-log(x) 1+1e-6 .. 2 63.8 ** 62.1
-
-** The accuracy for exp() and log() is low because the FPU (emulator)
-does not compute them directly; two operations are required.
-
-
-The emulator passes the "paranoia" tests (compiled with gcc 2.3.3 or
-later) for 'float' variables (24 bit precision numbers) when precision
-control is set to 24, 53 or 64 bits, and for 'double' variables (53
-bit precision numbers) when precision control is set to 53 bits (a
-properly performing FPU cannot pass the 'paranoia' tests for 'double'
-variables when precision control is set to 64 bits).
-
-The code for reducing the argument for the trig functions (fsin, fcos,
-fptan and fsincos) has been improved and now effectively uses a value
-for pi which is accurate to more than 128 bits precision. As a
-consequence, the accuracy of these functions for large arguments has
-been dramatically improved (and is now very much better than an 80486
-FPU). There is also now no degradation of accuracy for fcos and fptan
-for operands close to pi/2. Measured results are (note that the
-definition of accuracy has changed slightly from that used for the
-above table):
-
-Function Tested x range Worst result
- (absolute bits)
-
-cos(x) 0 .. 9.22e+18 62.0
-sin(x) 1e-16 .. 9.22e+18 62.1
-tan(x) 1e-16 .. 9.22e+18 61.8
-
-It is possible with some effort to find very large arguments which
-give much degraded precision. For example, the integer number
- 8227740058411162616.0
-is within about 10e-7 of a multiple of pi. To find the tan (for
-example) of this number to 64 bits precision it would be necessary to
-have a value of pi which had about 150 bits precision. The FPU
-emulator computes the result to about 42.6 bits precision (the correct
-result is about -9.739715e-8). On the other hand, an 80486 FPU returns
-0.01059, which in relative terms is hopelessly inaccurate.
-
-For arguments close to critical angles (which occur at multiples of
-pi/2) the emulator is more accurate than an 80486 FPU. For very large
-arguments, the emulator is far more accurate.
-
-
-Prior to version 1.20 of the emulator, the accuracy of the results for
-the transcendental functions (in their principal range) was not as
-good as the results from an 80486 FPU. From version 1.20, the accuracy
-has been considerably improved and these functions now give measured
-worst-case results which are better than the worst-case results given
-by an 80486 FPU.
-
-The following table gives the measured results for the emulator. The
-number of randomly selected arguments in each case is about half a
-million. The group of three columns gives the frequency of the given
-accuracy in number of times per million, thus the second of these
-columns shows that an accuracy of between 63.80 and 63.89 bits was
-found at a rate of 133 times per one million measurements for fsin.
-The results show that the fsin, fcos and fptan instructions return
-results which are in error (i.e. less accurate than the best possible
-result (which is 64 bits)) for about one per cent of all arguments
-between -pi/2 and +pi/2. The other instructions have a lower
-frequency of results which are in error. The last two columns give
-the worst accuracy which was found (in bits) and the approximate value
-of the argument which produced it.
-
- frequency (per M)
- ------------------- ---------------
-instr arg range # tests 63.7 63.8 63.9 worst at arg
- bits bits bits bits
------ ------------ ------- ---- ---- ----- ----- --------
-fsin (0,pi/2) 547756 0 133 10673 63.89 0.451317
-fcos (0,pi/2) 547563 0 126 10532 63.85 0.700801
-fptan (0,pi/2) 536274 11 267 10059 63.74 0.784876
-fpatan 4 quadrants 517087 0 8 1855 63.88 0.435121 (4q)
-fyl2x (0,20) 541861 0 0 1323 63.94 1.40923 (x)
-fyl2xp1 (-.293,.414) 520256 0 0 5678 63.93 0.408542 (x)
-f2xm1 (-1,1) 538847 4 481 6488 63.79 0.167709
-
-
-Tests performed on an 80486 FPU showed results of lower accuracy. The
-following table gives the results which were obtained with an AMD
-486DX2/66 (other tests indicate that an Intel 486DX produces
-identical results). The tests were basically the same as those used
-to measure the emulator (the values, being random, were in general not
-the same). The total number of tests for each instruction are given
-at the end of the table, in case each about 100k tests were performed.
-Another line of figures at the end of the table shows that most of the
-instructions return results which are in error for more than 10
-percent of the arguments tested.
-
-The numbers in the body of the table give the approx number of times a
-result of the given accuracy in bits (given in the left-most column)
-was obtained per one million arguments. For three of the instructions,
-two columns of results are given: * The second column for f2xm1 gives
-the number cases where the results of the first column were for a
-positive argument, this shows that this instruction gives better
-results for positive arguments than it does for negative. * In the
-cases of fcos and fptan, the first column gives the results when all
-cases where arguments greater than 1.5 were removed from the results
-given in the second column. Unlike the emulator, an 80486 FPU returns
-results of relatively poor accuracy for these instructions when the
-argument approaches pi/2. The table does not show those cases when the
-accuracy of the results were less than 62 bits, which occurs quite
-often for fsin and fptan when the argument approaches pi/2. This poor
-accuracy is discussed above in relation to the Turbo C "emulator", and
-the accuracy of the value of pi.
-
-
-bits f2xm1 f2xm1 fpatan fcos fcos fyl2x fyl2xp1 fsin fptan fptan
-62.0 0 0 0 0 437 0 0 0 0 925
-62.1 0 0 10 0 894 0 0 0 0 1023
-62.2 14 0 0 0 1033 0 0 0 0 945
-62.3 57 0 0 0 1202 0 0 0 0 1023
-62.4 385 0 0 10 1292 0 23 0 0 1178
-62.5 1140 0 0 119 1649 0 39 0 0 1149
-62.6 2037 0 0 189 1620 0 16 0 0 1169
-62.7 5086 14 0 646 2315 10 101 35 39 1402
-62.8 8818 86 0 984 3050 59 287 131 224 2036
-62.9 11340 1355 0 2126 4153 79 605 357 321 1948
-63.0 15557 4750 0 3319 5376 246 1281 862 808 2688
-63.1 20016 8288 0 4620 6628 511 2569 1723 1510 3302
-63.2 24945 11127 10 6588 8098 1120 4470 2968 2990 4724
-63.3 25686 12382 69 8774 10682 1906 6775 4482 5474 7236
-63.4 29219 14722 79 11109 12311 3094 9414 7259 8912 10587
-63.5 30458 14936 393 13802 15014 5874 12666 9609 13762 15262
-63.6 32439 16448 1277 17945 19028 10226 15537 14657 19158 20346
-63.7 35031 16805 4067 23003 23947 18910 20116 21333 25001 26209
-63.8 33251 15820 7673 24781 25675 24617 25354 24440 29433 30329
-63.9 33293 16833 18529 28318 29233 31267 31470 27748 29676 30601
-
-Per cent with error:
- 30.9 3.2 18.5 9.8 13.1 11.6 17.4
-Total arguments tested:
- 70194 70099 101784 100641 100641 101799 128853 114893 102675 102675
-
-
-------------------------- Contributors -------------------------------
-
-A number of people have contributed to the development of the
-emulator, often by just reporting bugs, sometimes with suggested
-fixes, and a few kind people have provided me with access in one way
-or another to an 80486 machine. Contributors include (to those people
-who I may have forgotten, please forgive me):
-
-Linus Torvalds
-Tommy.Thorn@...mi.aau.dk
-Andrew.Tridgell@....edu.au
-Nick Holloway, alfie@....warwick.ac.uk
-Hermano Moura, moura@....gla.ac.uk
-Jon Jagger, J.Jagger@....ac.uk
-Lennart Benschop
-Brian Gallew, geek+@....EDU
-Thomas Staniszewski, ts3v+@...rew.cmu.edu
-Martin Howell, mph@...sma.apana.org.au
-M Saggaf, alsaggaf@...ena.mit.edu
-Peter Barker, PETER@...psy.sci.fau.edu
-tom@...ivie.tuwien.ac.at
-Dan Russel, russed@....edu
-Daniel Carosone, danielce@...mu.oz.au
-cae@...organ.com
-Hamish Coleman, t933093@...yos.xx.rmit.oz.au
-Bruce Evans, bde@...lizec.zeta.org.au
-Timo Korvola, Timo.Korvola@....fi
-Rick Lyons, rick@...orback.brisnet.org.au
-Rick, jrs@...ld.std.com
-
-...and numerous others who responded to my request for help with
-a real 80486.
-
diff --git a/arch/x86/math-emu/control_w.h b/arch/x86/math-emu/control_w.h
deleted file mode 100644
index 93cbc89b34e2..000000000000
--- a/arch/x86/math-emu/control_w.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | control_w.h |
- | |
- | Copyright (C) 1992,1993 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...c.cc.monash.edu.au |
- | |
- +---------------------------------------------------------------------------*/
-
-#ifndef _CONTROLW_H_
-#define _CONTROLW_H_
-
-#ifdef __ASSEMBLER__
-#define _Const_(x) $##x
-#else
-#define _Const_(x) x
-#endif
-
-#define CW_RC _Const_(0x0C00) /* rounding control */
-#define CW_PC _Const_(0x0300) /* precision control */
-
-#define CW_Precision Const_(0x0020) /* loss of precision mask */
-#define CW_Underflow Const_(0x0010) /* underflow mask */
-#define CW_Overflow Const_(0x0008) /* overflow mask */
-#define CW_ZeroDiv Const_(0x0004) /* divide by zero mask */
-#define CW_Denormal Const_(0x0002) /* denormalized operand mask */
-#define CW_Invalid Const_(0x0001) /* invalid operation mask */
-
-#define CW_Exceptions _Const_(0x003f) /* all masks */
-
-#define RC_RND _Const_(0x0000)
-#define RC_DOWN _Const_(0x0400)
-#define RC_UP _Const_(0x0800)
-#define RC_CHOP _Const_(0x0C00)
-
-/* p 15-5: Precision control bits affect only the following:
- ADD, SUB(R), MUL, DIV(R), and SQRT */
-#define PR_24_BITS _Const_(0x000)
-#define PR_53_BITS _Const_(0x200)
-#define PR_64_BITS _Const_(0x300)
-#define PR_RESERVED_BITS _Const_(0x100)
-/* FULL_PRECISION simulates all exceptions masked */
-#define FULL_PRECISION (PR_64_BITS | RC_RND | 0x3f)
-
-#endif /* _CONTROLW_H_ */
diff --git a/arch/x86/math-emu/div_Xsig.S b/arch/x86/math-emu/div_Xsig.S
deleted file mode 100644
index 8c270ab415be..000000000000
--- a/arch/x86/math-emu/div_Xsig.S
+++ /dev/null
@@ -1,367 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "div_Xsig.S"
-/*---------------------------------------------------------------------------+
- | div_Xsig.S |
- | |
- | Division subroutine for 96 bit quantities |
- | |
- | Copyright (C) 1994,1995 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...obi.maths.monash.edu.au |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | Divide the 96 bit quantity pointed to by a, by that pointed to by b, and |
- | put the 96 bit result at the location d. |
- | |
- | The result may not be accurate to 96 bits. It is intended for use where |
- | a result better than 64 bits is required. The result should usually be |
- | good to at least 94 bits. |
- | The returned result is actually divided by one half. This is done to |
- | prevent overflow. |
- | |
- | .aaaaaaaaaaaaaa / .bbbbbbbbbbbbb -> .dddddddddddd |
- | |
- | void div_Xsig(Xsig *a, Xsig *b, Xsig *dest) |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "fpu_emu.h"
-
-
-#define XsigLL(x) (x)
-#define XsigL(x) 4(x)
-#define XsigH(x) 8(x)
-
-
-#ifndef NON_REENTRANT_FPU
-/*
- Local storage on the stack:
- Accumulator: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0
- */
-#define FPU_accum_3 -4(%ebp)
-#define FPU_accum_2 -8(%ebp)
-#define FPU_accum_1 -12(%ebp)
-#define FPU_accum_0 -16(%ebp)
-#define FPU_result_3 -20(%ebp)
-#define FPU_result_2 -24(%ebp)
-#define FPU_result_1 -28(%ebp)
-
-#else
-.data
-/*
- Local storage in a static area:
- Accumulator: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0
- */
- .align 4,0
-FPU_accum_3:
- .long 0
-FPU_accum_2:
- .long 0
-FPU_accum_1:
- .long 0
-FPU_accum_0:
- .long 0
-FPU_result_3:
- .long 0
-FPU_result_2:
- .long 0
-FPU_result_1:
- .long 0
-#endif /* NON_REENTRANT_FPU */
-
-
-.text
-SYM_FUNC_START(div_Xsig)
- pushl %ebp
- movl %esp,%ebp
-#ifndef NON_REENTRANT_FPU
- subl $28,%esp
-#endif /* NON_REENTRANT_FPU */
-
- pushl %esi
- pushl %edi
- pushl %ebx
-
- movl PARAM1,%esi /* pointer to num */
- movl PARAM2,%ebx /* pointer to denom */
-
-#ifdef PARANOID
- testl $0x80000000, XsigH(%ebx) /* Divisor */
- je L_bugged
-#endif /* PARANOID */
-
-
-/*---------------------------------------------------------------------------+
- | Divide: Return arg1/arg2 to arg3. |
- | |
- | The maximum returned value is (ignoring exponents) |
- | .ffffffff ffffffff |
- | ------------------ = 1.ffffffff fffffffe |
- | .80000000 00000000 |
- | and the minimum is |
- | .80000000 00000000 |
- | ------------------ = .80000000 00000001 (rounded) |
- | .ffffffff ffffffff |
- | |
- +---------------------------------------------------------------------------*/
-
- /* Save extended dividend in local register */
-
- /* Divide by 2 to prevent overflow */
- clc
- movl XsigH(%esi),%eax
- rcrl %eax
- movl %eax,FPU_accum_3
- movl XsigL(%esi),%eax
- rcrl %eax
- movl %eax,FPU_accum_2
- movl XsigLL(%esi),%eax
- rcrl %eax
- movl %eax,FPU_accum_1
- movl $0,%eax
- rcrl %eax
- movl %eax,FPU_accum_0
-
- movl FPU_accum_2,%eax /* Get the current num */
- movl FPU_accum_3,%edx
-
-/*----------------------------------------------------------------------*/
-/* Initialization done.
- Do the first 32 bits. */
-
- /* We will divide by a number which is too large */
- movl XsigH(%ebx),%ecx
- addl $1,%ecx
- jnc LFirst_div_not_1
-
- /* here we need to divide by 100000000h,
- i.e., no division at all.. */
- mov %edx,%eax
- jmp LFirst_div_done
-
-LFirst_div_not_1:
- divl %ecx /* Divide the numerator by the augmented
- denom ms dw */
-
-LFirst_div_done:
- movl %eax,FPU_result_3 /* Put the result in the answer */
-
- mull XsigH(%ebx) /* mul by the ms dw of the denom */
-
- subl %eax,FPU_accum_2 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_3
-
- movl FPU_result_3,%eax /* Get the result back */
- mull XsigL(%ebx) /* now mul the ls dw of the denom */
-
- subl %eax,FPU_accum_1 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_2
- sbbl $0,FPU_accum_3
- je LDo_2nd_32_bits /* Must check for non-zero result here */
-
-#ifdef PARANOID
- jb L_bugged_1
-#endif /* PARANOID */
-
- /* need to subtract another once of the denom */
- incl FPU_result_3 /* Correct the answer */
-
- movl XsigL(%ebx),%eax
- movl XsigH(%ebx),%edx
- subl %eax,FPU_accum_1 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_2
-
-#ifdef PARANOID
- sbbl $0,FPU_accum_3
- jne L_bugged_1 /* Must check for non-zero result here */
-#endif /* PARANOID */
-
-/*----------------------------------------------------------------------*/
-/* Half of the main problem is done, there is just a reduced numerator
- to handle now.
- Work with the second 32 bits, FPU_accum_0 not used from now on */
-LDo_2nd_32_bits:
- movl FPU_accum_2,%edx /* get the reduced num */
- movl FPU_accum_1,%eax
-
- /* need to check for possible subsequent overflow */
- cmpl XsigH(%ebx),%edx
- jb LDo_2nd_div
- ja LPrevent_2nd_overflow
-
- cmpl XsigL(%ebx),%eax
- jb LDo_2nd_div
-
-LPrevent_2nd_overflow:
-/* The numerator is greater or equal, would cause overflow */
- /* prevent overflow */
- subl XsigL(%ebx),%eax
- sbbl XsigH(%ebx),%edx
- movl %edx,FPU_accum_2
- movl %eax,FPU_accum_1
-
- incl FPU_result_3 /* Reflect the subtraction in the answer */
-
-#ifdef PARANOID
- je L_bugged_2 /* Can't bump the result to 1.0 */
-#endif /* PARANOID */
-
-LDo_2nd_div:
- cmpl $0,%ecx /* augmented denom msw */
- jnz LSecond_div_not_1
-
- /* %ecx == 0, we are dividing by 1.0 */
- mov %edx,%eax
- jmp LSecond_div_done
-
-LSecond_div_not_1:
- divl %ecx /* Divide the numerator by the denom ms dw */
-
-LSecond_div_done:
- movl %eax,FPU_result_2 /* Put the result in the answer */
-
- mull XsigH(%ebx) /* mul by the ms dw of the denom */
-
- subl %eax,FPU_accum_1 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_2
-
-#ifdef PARANOID
- jc L_bugged_2
-#endif /* PARANOID */
-
- movl FPU_result_2,%eax /* Get the result back */
- mull XsigL(%ebx) /* now mul the ls dw of the denom */
-
- subl %eax,FPU_accum_0 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_1 /* Subtract from the num local reg */
- sbbl $0,FPU_accum_2
-
-#ifdef PARANOID
- jc L_bugged_2
-#endif /* PARANOID */
-
- jz LDo_3rd_32_bits
-
-#ifdef PARANOID
- cmpl $1,FPU_accum_2
- jne L_bugged_2
-#endif /* PARANOID */
-
- /* need to subtract another once of the denom */
- movl XsigL(%ebx),%eax
- movl XsigH(%ebx),%edx
- subl %eax,FPU_accum_0 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_1
- sbbl $0,FPU_accum_2
-
-#ifdef PARANOID
- jc L_bugged_2
- jne L_bugged_2
-#endif /* PARANOID */
-
- addl $1,FPU_result_2 /* Correct the answer */
- adcl $0,FPU_result_3
-
-#ifdef PARANOID
- jc L_bugged_2 /* Must check for non-zero result here */
-#endif /* PARANOID */
-
-/*----------------------------------------------------------------------*/
-/* The division is essentially finished here, we just need to perform
- tidying operations.
- Deal with the 3rd 32 bits */
-LDo_3rd_32_bits:
- /* We use an approximation for the third 32 bits.
- To take account of the 3rd 32 bits of the divisor
- (call them del), we subtract del * (a/b) */
-
- movl FPU_result_3,%eax /* a/b */
- mull XsigLL(%ebx) /* del */
-
- subl %edx,FPU_accum_1
-
- /* A borrow indicates that the result is negative */
- jnb LTest_over
-
- movl XsigH(%ebx),%edx
- addl %edx,FPU_accum_1
-
- subl $1,FPU_result_2 /* Adjust the answer */
- sbbl $0,FPU_result_3
-
- /* The above addition might not have been enough, check again. */
- movl FPU_accum_1,%edx /* get the reduced num */
- cmpl XsigH(%ebx),%edx /* denom */
- jb LDo_3rd_div
-
- movl XsigH(%ebx),%edx
- addl %edx,FPU_accum_1
-
- subl $1,FPU_result_2 /* Adjust the answer */
- sbbl $0,FPU_result_3
- jmp LDo_3rd_div
-
-LTest_over:
- movl FPU_accum_1,%edx /* get the reduced num */
-
- /* need to check for possible subsequent overflow */
- cmpl XsigH(%ebx),%edx /* denom */
- jb LDo_3rd_div
-
- /* prevent overflow */
- subl XsigH(%ebx),%edx
- movl %edx,FPU_accum_1
-
- addl $1,FPU_result_2 /* Reflect the subtraction in the answer */
- adcl $0,FPU_result_3
-
-LDo_3rd_div:
- movl FPU_accum_0,%eax
- movl FPU_accum_1,%edx
- divl XsigH(%ebx)
-
- movl %eax,FPU_result_1 /* Rough estimate of third word */
-
- movl PARAM3,%esi /* pointer to answer */
-
- movl FPU_result_1,%eax
- movl %eax,XsigLL(%esi)
- movl FPU_result_2,%eax
- movl %eax,XsigL(%esi)
- movl FPU_result_3,%eax
- movl %eax,XsigH(%esi)
-
-L_exit:
- popl %ebx
- popl %edi
- popl %esi
-
- leave
- RET
-
-
-#ifdef PARANOID
-/* The logic is wrong if we got here */
-L_bugged:
- pushl EX_INTERNAL|0x240
- call EXCEPTION
- pop %ebx
- jmp L_exit
-
-L_bugged_1:
- pushl EX_INTERNAL|0x241
- call EXCEPTION
- pop %ebx
- jmp L_exit
-
-L_bugged_2:
- pushl EX_INTERNAL|0x242
- call EXCEPTION
- pop %ebx
- jmp L_exit
-#endif /* PARANOID */
-SYM_FUNC_END(div_Xsig)
diff --git a/arch/x86/math-emu/div_small.S b/arch/x86/math-emu/div_small.S
deleted file mode 100644
index 637439bfefa4..000000000000
--- a/arch/x86/math-emu/div_small.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "div_small.S"
-/*---------------------------------------------------------------------------+
- | div_small.S |
- | |
- | Divide a 64 bit integer by a 32 bit integer & return remainder. |
- | |
- | Copyright (C) 1992,1995 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...obi.maths.monash.edu.au |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | unsigned long FPU_div_small(unsigned long long *x, unsigned long y) |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_emu.h"
-
-.text
-SYM_FUNC_START(FPU_div_small)
- pushl %ebp
- movl %esp,%ebp
-
- pushl %esi
-
- movl PARAM1,%esi /* pointer to num */
- movl PARAM2,%ecx /* The denominator */
-
- movl 4(%esi),%eax /* Get the current num msw */
- xorl %edx,%edx
- divl %ecx
-
- movl %eax,4(%esi)
-
- movl (%esi),%eax /* Get the num lsw */
- divl %ecx
-
- movl %eax,(%esi)
-
- movl %edx,%eax /* Return the remainder in eax */
-
- popl %esi
-
- leave
- RET
-SYM_FUNC_END(FPU_div_small)
diff --git a/arch/x86/math-emu/errors.c b/arch/x86/math-emu/errors.c
deleted file mode 100644
index ec071cbb0804..000000000000
--- a/arch/x86/math-emu/errors.c
+++ /dev/null
@@ -1,686 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | errors.c |
- | |
- | The error handling functions for wm-FPU-emu |
- | |
- | Copyright (C) 1992,1993,1994,1996 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...obi.maths.monash.edu.au |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | Note: |
- | The file contains code which accesses user memory. |
- | Emulator static data may change when user memory is accessed, due to |
- | other processes using the emulator while swapping is in progress. |
- +---------------------------------------------------------------------------*/
-
-#include <linux/signal.h>
-
-#include <linux/uaccess.h>
-
-#include "fpu_emu.h"
-#include "fpu_system.h"
-#include "exception.h"
-#include "status_w.h"
-#include "control_w.h"
-#include "reg_constant.h"
-#include "version.h"
-
-/* */
-#undef PRINT_MESSAGES
-/* */
-
-#if 0
-void Un_impl(void)
-{
- u_char byte1, FPU_modrm;
- unsigned long address = FPU_ORIG_EIP;
-
- RE_ENTRANT_CHECK_OFF;
- /* No need to check access_ok(), we have previously fetched these bytes. */
- printk("Unimplemented FPU Opcode at eip=%p : ", (void __user *)address);
- if (FPU_CS == __USER_CS) {
- while (1) {
- FPU_get_user(byte1, (u_char __user *) address);
- if ((byte1 & 0xf8) == 0xd8)
- break;
- printk("[%02x]", byte1);
- address++;
- }
- printk("%02x ", byte1);
- FPU_get_user(FPU_modrm, 1 + (u_char __user *) address);
-
- if (FPU_modrm >= 0300)
- printk("%02x (%02x+%d)\n", FPU_modrm, FPU_modrm & 0xf8,
- FPU_modrm & 7);
- else
- printk("/%d\n", (FPU_modrm >> 3) & 7);
- } else {
- printk("cs selector = %04x\n", FPU_CS);
- }
-
- RE_ENTRANT_CHECK_ON;
-
- EXCEPTION(EX_Invalid);
-
-}
-#endif /* 0 */
-
-/*
- Called for opcodes which are illegal and which are known to result in a
- SIGILL with a real 80486.
- */
-void FPU_illegal(void)
-{
- math_abort(FPU_info, SIGILL);
-}
-
-void FPU_printall(void)
-{
- int i;
- static const char *tag_desc[] = { "Valid", "Zero", "ERROR", "Empty",
- "DeNorm", "Inf", "NaN"
- };
- u_char byte1, FPU_modrm;
- unsigned long address = FPU_ORIG_EIP;
-
- RE_ENTRANT_CHECK_OFF;
- /* No need to check access_ok(), we have previously fetched these bytes. */
- printk("At %p:", (void *)address);
- if (FPU_CS == __USER_CS) {
-#define MAX_PRINTED_BYTES 20
- for (i = 0; i < MAX_PRINTED_BYTES; i++) {
- FPU_get_user(byte1, (u_char __user *) address);
- if ((byte1 & 0xf8) == 0xd8) {
- printk(" %02x", byte1);
- break;
- }
- printk(" [%02x]", byte1);
- address++;
- }
- if (i == MAX_PRINTED_BYTES)
- printk(" [more..]\n");
- else {
- FPU_get_user(FPU_modrm, 1 + (u_char __user *) address);
-
- if (FPU_modrm >= 0300)
- printk(" %02x (%02x+%d)\n", FPU_modrm,
- FPU_modrm & 0xf8, FPU_modrm & 7);
- else
- printk(" /%d, mod=%d rm=%d\n",
- (FPU_modrm >> 3) & 7,
- (FPU_modrm >> 6) & 3, FPU_modrm & 7);
- }
- } else {
- printk("%04x\n", FPU_CS);
- }
-
- partial_status = status_word();
-
-#ifdef DEBUGGING
- if (partial_status & SW_Backward)
- printk("SW: backward compatibility\n");
- if (partial_status & SW_C3)
- printk("SW: condition bit 3\n");
- if (partial_status & SW_C2)
- printk("SW: condition bit 2\n");
- if (partial_status & SW_C1)
- printk("SW: condition bit 1\n");
- if (partial_status & SW_C0)
- printk("SW: condition bit 0\n");
- if (partial_status & SW_Summary)
- printk("SW: exception summary\n");
- if (partial_status & SW_Stack_Fault)
- printk("SW: stack fault\n");
- if (partial_status & SW_Precision)
- printk("SW: loss of precision\n");
- if (partial_status & SW_Underflow)
- printk("SW: underflow\n");
- if (partial_status & SW_Overflow)
- printk("SW: overflow\n");
- if (partial_status & SW_Zero_Div)
- printk("SW: divide by zero\n");
- if (partial_status & SW_Denorm_Op)
- printk("SW: denormalized operand\n");
- if (partial_status & SW_Invalid)
- printk("SW: invalid operation\n");
-#endif /* DEBUGGING */
-
- printk(" SW: b=%d st=%d es=%d sf=%d cc=%d%d%d%d ef=%d%d%d%d%d%d\n", partial_status & 0x8000 ? 1 : 0, /* busy */
- (partial_status & 0x3800) >> 11, /* stack top pointer */
- partial_status & 0x80 ? 1 : 0, /* Error summary status */
- partial_status & 0x40 ? 1 : 0, /* Stack flag */
- partial_status & SW_C3 ? 1 : 0, partial_status & SW_C2 ? 1 : 0, /* cc */
- partial_status & SW_C1 ? 1 : 0, partial_status & SW_C0 ? 1 : 0, /* cc */
- partial_status & SW_Precision ? 1 : 0,
- partial_status & SW_Underflow ? 1 : 0,
- partial_status & SW_Overflow ? 1 : 0,
- partial_status & SW_Zero_Div ? 1 : 0,
- partial_status & SW_Denorm_Op ? 1 : 0,
- partial_status & SW_Invalid ? 1 : 0);
-
- printk(" CW: ic=%d rc=%d%d pc=%d%d iem=%d ef=%d%d%d%d%d%d\n",
- control_word & 0x1000 ? 1 : 0,
- (control_word & 0x800) >> 11, (control_word & 0x400) >> 10,
- (control_word & 0x200) >> 9, (control_word & 0x100) >> 8,
- control_word & 0x80 ? 1 : 0,
- control_word & SW_Precision ? 1 : 0,
- control_word & SW_Underflow ? 1 : 0,
- control_word & SW_Overflow ? 1 : 0,
- control_word & SW_Zero_Div ? 1 : 0,
- control_word & SW_Denorm_Op ? 1 : 0,
- control_word & SW_Invalid ? 1 : 0);
-
- for (i = 0; i < 8; i++) {
- FPU_REG *r = &st(i);
- u_char tagi = FPU_gettagi(i);
-
- switch (tagi) {
- case TAG_Empty:
- continue;
- case TAG_Zero:
- case TAG_Special:
- /* Update tagi for the printk below */
- tagi = FPU_Special(r);
- fallthrough;
- case TAG_Valid:
- printk("st(%d) %c .%04lx %04lx %04lx %04lx e%+-6d ", i,
- getsign(r) ? '-' : '+',
- (long)(r->sigh >> 16),
- (long)(r->sigh & 0xFFFF),
- (long)(r->sigl >> 16),
- (long)(r->sigl & 0xFFFF),
- exponent(r) - EXP_BIAS + 1);
- break;
- default:
- printk("Whoops! Error in errors.c: tag%d is %d ", i,
- tagi);
- continue;
- }
- printk("%s\n", tag_desc[(int)(unsigned)tagi]);
- }
-
- RE_ENTRANT_CHECK_ON;
-
-}
-
-static struct {
- int type;
- const char *name;
-} exception_names[] = {
- {
- EX_StackOver, "stack overflow"}, {
- EX_StackUnder, "stack underflow"}, {
- EX_Precision, "loss of precision"}, {
- EX_Underflow, "underflow"}, {
- EX_Overflow, "overflow"}, {
- EX_ZeroDiv, "divide by zero"}, {
- EX_Denormal, "denormalized operand"}, {
- EX_Invalid, "invalid operation"}, {
- EX_INTERNAL, "INTERNAL BUG in " FPU_VERSION}, {
- 0, NULL}
-};
-
-/*
- EX_INTERNAL is always given with a code which indicates where the
- error was detected.
-
- Internal error types:
- 0x14 in fpu_etc.c
- 0x1nn in a *.c file:
- 0x101 in reg_add_sub.c
- 0x102 in reg_mul.c
- 0x104 in poly_atan.c
- 0x105 in reg_mul.c
- 0x107 in fpu_trig.c
- 0x108 in reg_compare.c
- 0x109 in reg_compare.c
- 0x110 in reg_add_sub.c
- 0x111 in fpe_entry.c
- 0x112 in fpu_trig.c
- 0x113 in errors.c
- 0x115 in fpu_trig.c
- 0x116 in fpu_trig.c
- 0x117 in fpu_trig.c
- 0x118 in fpu_trig.c
- 0x119 in fpu_trig.c
- 0x120 in poly_atan.c
- 0x121 in reg_compare.c
- 0x122 in reg_compare.c
- 0x123 in reg_compare.c
- 0x125 in fpu_trig.c
- 0x126 in fpu_entry.c
- 0x127 in poly_2xm1.c
- 0x128 in fpu_entry.c
- 0x129 in fpu_entry.c
- 0x130 in get_address.c
- 0x131 in get_address.c
- 0x132 in get_address.c
- 0x133 in get_address.c
- 0x140 in load_store.c
- 0x141 in load_store.c
- 0x150 in poly_sin.c
- 0x151 in poly_sin.c
- 0x160 in reg_ld_str.c
- 0x161 in reg_ld_str.c
- 0x162 in reg_ld_str.c
- 0x163 in reg_ld_str.c
- 0x164 in reg_ld_str.c
- 0x170 in fpu_tags.c
- 0x171 in fpu_tags.c
- 0x172 in fpu_tags.c
- 0x180 in reg_convert.c
- 0x2nn in an *.S file:
- 0x201 in reg_u_add.S
- 0x202 in reg_u_div.S
- 0x203 in reg_u_div.S
- 0x204 in reg_u_div.S
- 0x205 in reg_u_mul.S
- 0x206 in reg_u_sub.S
- 0x207 in wm_sqrt.S
- 0x208 in reg_div.S
- 0x209 in reg_u_sub.S
- 0x210 in reg_u_sub.S
- 0x211 in reg_u_sub.S
- 0x212 in reg_u_sub.S
- 0x213 in wm_sqrt.S
- 0x214 in wm_sqrt.S
- 0x215 in wm_sqrt.S
- 0x220 in reg_norm.S
- 0x221 in reg_norm.S
- 0x230 in reg_round.S
- 0x231 in reg_round.S
- 0x232 in reg_round.S
- 0x233 in reg_round.S
- 0x234 in reg_round.S
- 0x235 in reg_round.S
- 0x236 in reg_round.S
- 0x240 in div_Xsig.S
- 0x241 in div_Xsig.S
- 0x242 in div_Xsig.S
- */
-
-asmlinkage __visible void FPU_exception(int n)
-{
- int i, int_type;
-
- int_type = 0; /* Needed only to stop compiler warnings */
- if (n & EX_INTERNAL) {
- int_type = n - EX_INTERNAL;
- n = EX_INTERNAL;
- /* Set lots of exception bits! */
- partial_status |= (SW_Exc_Mask | SW_Summary | SW_Backward);
- } else {
- /* Extract only the bits which we use to set the status word */
- n &= (SW_Exc_Mask);
- /* Set the corresponding exception bit */
- partial_status |= n;
- /* Set summary bits iff exception isn't masked */
- if (partial_status & ~control_word & CW_Exceptions)
- partial_status |= (SW_Summary | SW_Backward);
- if (n & (SW_Stack_Fault | EX_Precision)) {
- if (!(n & SW_C1))
- /* This bit distinguishes over- from underflow for a stack fault,
- and roundup from round-down for precision loss. */
- partial_status &= ~SW_C1;
- }
- }
-
- RE_ENTRANT_CHECK_OFF;
- if ((~control_word & n & CW_Exceptions) || (n == EX_INTERNAL)) {
- /* Get a name string for error reporting */
- for (i = 0; exception_names[i].type; i++)
- if ((exception_names[i].type & n) ==
- exception_names[i].type)
- break;
-
- if (exception_names[i].type) {
-#ifdef PRINT_MESSAGES
- printk("FP Exception: %s!\n", exception_names[i].name);
-#endif /* PRINT_MESSAGES */
- } else
- printk("FPU emulator: Unknown Exception: 0x%04x!\n", n);
-
- if (n == EX_INTERNAL) {
- printk("FPU emulator: Internal error type 0x%04x\n",
- int_type);
- FPU_printall();
- }
-#ifdef PRINT_MESSAGES
- else
- FPU_printall();
-#endif /* PRINT_MESSAGES */
-
- /*
- * The 80486 generates an interrupt on the next non-control FPU
- * instruction. So we need some means of flagging it.
- * We use the ES (Error Summary) bit for this.
- */
- }
- RE_ENTRANT_CHECK_ON;
-
-#ifdef __DEBUG__
- math_abort(FPU_info, SIGFPE);
-#endif /* __DEBUG__ */
-
-}
-
-/* Real operation attempted on a NaN. */
-/* Returns < 0 if the exception is unmasked */
-int real_1op_NaN(FPU_REG *a)
-{
- int signalling, isNaN;
-
- isNaN = (exponent(a) == EXP_OVER) && (a->sigh & 0x80000000);
-
- /* The default result for the case of two "equal" NaNs (signs may
- differ) is chosen to reproduce 80486 behaviour */
- signalling = isNaN && !(a->sigh & 0x40000000);
-
- if (!signalling) {
- if (!isNaN) { /* pseudo-NaN, or other unsupported? */
- if (control_word & CW_Invalid) {
- /* Masked response */
- reg_copy(&CONST_QNaN, a);
- }
- EXCEPTION(EX_Invalid);
- return (!(control_word & CW_Invalid) ? FPU_Exception :
- 0) | TAG_Special;
- }
- return TAG_Special;
- }
-
- if (control_word & CW_Invalid) {
- /* The masked response */
- if (!(a->sigh & 0x80000000)) { /* pseudo-NaN ? */
- reg_copy(&CONST_QNaN, a);
- }
- /* ensure a Quiet NaN */
- a->sigh |= 0x40000000;
- }
-
- EXCEPTION(EX_Invalid);
-
- return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Special;
-}
-
-/* Real operation attempted on two operands, one a NaN. */
-/* Returns < 0 if the exception is unmasked */
-int real_2op_NaN(FPU_REG const *b, u_char tagb,
- int deststnr, FPU_REG const *defaultNaN)
-{
- FPU_REG *dest = &st(deststnr);
- FPU_REG const *a = dest;
- u_char taga = FPU_gettagi(deststnr);
- FPU_REG const *x;
- int signalling, unsupported;
-
- if (taga == TAG_Special)
- taga = FPU_Special(a);
- if (tagb == TAG_Special)
- tagb = FPU_Special(b);
-
- /* TW_NaN is also used for unsupported data types. */
- unsupported = ((taga == TW_NaN)
- && !((exponent(a) == EXP_OVER)
- && (a->sigh & 0x80000000)))
- || ((tagb == TW_NaN)
- && !((exponent(b) == EXP_OVER) && (b->sigh & 0x80000000)));
- if (unsupported) {
- if (control_word & CW_Invalid) {
- /* Masked response */
- FPU_copy_to_regi(&CONST_QNaN, TAG_Special, deststnr);
- }
- EXCEPTION(EX_Invalid);
- return (!(control_word & CW_Invalid) ? FPU_Exception : 0) |
- TAG_Special;
- }
-
- if (taga == TW_NaN) {
- x = a;
- if (tagb == TW_NaN) {
- signalling = !(a->sigh & b->sigh & 0x40000000);
- if (significand(b) > significand(a))
- x = b;
- else if (significand(b) == significand(a)) {
- /* The default result for the case of two "equal" NaNs (signs may
- differ) is chosen to reproduce 80486 behaviour */
- x = defaultNaN;
- }
- } else {
- /* return the quiet version of the NaN in a */
- signalling = !(a->sigh & 0x40000000);
- }
- } else
-#ifdef PARANOID
- if (tagb == TW_NaN)
-#endif /* PARANOID */
- {
- signalling = !(b->sigh & 0x40000000);
- x = b;
- }
-#ifdef PARANOID
- else {
- signalling = 0;
- EXCEPTION(EX_INTERNAL | 0x113);
- x = &CONST_QNaN;
- }
-#endif /* PARANOID */
-
- if ((!signalling) || (control_word & CW_Invalid)) {
- if (!x)
- x = b;
-
- if (!(x->sigh & 0x80000000)) /* pseudo-NaN ? */
- x = &CONST_QNaN;
-
- FPU_copy_to_regi(x, TAG_Special, deststnr);
-
- if (!signalling)
- return TAG_Special;
-
- /* ensure a Quiet NaN */
- dest->sigh |= 0x40000000;
- }
-
- EXCEPTION(EX_Invalid);
-
- return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Special;
-}
-
-/* Invalid arith operation on Valid registers */
-/* Returns < 0 if the exception is unmasked */
-asmlinkage __visible int arith_invalid(int deststnr)
-{
-
- EXCEPTION(EX_Invalid);
-
- if (control_word & CW_Invalid) {
- /* The masked response */
- FPU_copy_to_regi(&CONST_QNaN, TAG_Special, deststnr);
- }
-
- return (!(control_word & CW_Invalid) ? FPU_Exception : 0) | TAG_Valid;
-
-}
-
-/* Divide a finite number by zero */
-asmlinkage __visible int FPU_divide_by_zero(int deststnr, u_char sign)
-{
- FPU_REG *dest = &st(deststnr);
- int tag = TAG_Valid;
-
- if (control_word & CW_ZeroDiv) {
- /* The masked response */
- FPU_copy_to_regi(&CONST_INF, TAG_Special, deststnr);
- setsign(dest, sign);
- tag = TAG_Special;
- }
-
- EXCEPTION(EX_ZeroDiv);
-
- return (!(control_word & CW_ZeroDiv) ? FPU_Exception : 0) | tag;
-
-}
-
-/* This may be called often, so keep it lean */
-int set_precision_flag(int flags)
-{
- if (control_word & CW_Precision) {
- partial_status &= ~(SW_C1 & flags);
- partial_status |= flags; /* The masked response */
- return 0;
- } else {
- EXCEPTION(flags);
- return 1;
- }
-}
-
-/* This may be called often, so keep it lean */
-asmlinkage __visible void set_precision_flag_up(void)
-{
- if (control_word & CW_Precision)
- partial_status |= (SW_Precision | SW_C1); /* The masked response */
- else
- EXCEPTION(EX_Precision | SW_C1);
-}
-
-/* This may be called often, so keep it lean */
-asmlinkage __visible void set_precision_flag_down(void)
-{
- if (control_word & CW_Precision) { /* The masked response */
- partial_status &= ~SW_C1;
- partial_status |= SW_Precision;
- } else
- EXCEPTION(EX_Precision);
-}
-
-asmlinkage __visible int denormal_operand(void)
-{
- if (control_word & CW_Denormal) { /* The masked response */
- partial_status |= SW_Denorm_Op;
- return TAG_Special;
- } else {
- EXCEPTION(EX_Denormal);
- return TAG_Special | FPU_Exception;
- }
-}
-
-asmlinkage __visible int arith_overflow(FPU_REG *dest)
-{
- int tag = TAG_Valid;
-
- if (control_word & CW_Overflow) {
- /* The masked response */
-/* ###### The response here depends upon the rounding mode */
- reg_copy(&CONST_INF, dest);
- tag = TAG_Special;
- } else {
- /* Subtract the magic number from the exponent */
- addexponent(dest, (-3 * (1 << 13)));
- }
-
- EXCEPTION(EX_Overflow);
- if (control_word & CW_Overflow) {
- /* The overflow exception is masked. */
- /* By definition, precision is lost.
- The roundup bit (C1) is also set because we have
- "rounded" upwards to Infinity. */
- EXCEPTION(EX_Precision | SW_C1);
- return tag;
- }
-
- return tag;
-
-}
-
-asmlinkage __visible int arith_underflow(FPU_REG *dest)
-{
- int tag = TAG_Valid;
-
- if (control_word & CW_Underflow) {
- /* The masked response */
- if (exponent16(dest) <= EXP_UNDER - 63) {
- reg_copy(&CONST_Z, dest);
- partial_status &= ~SW_C1; /* Round down. */
- tag = TAG_Zero;
- } else {
- stdexp(dest);
- }
- } else {
- /* Add the magic number to the exponent. */
- addexponent(dest, (3 * (1 << 13)) + EXTENDED_Ebias);
- }
-
- EXCEPTION(EX_Underflow);
- if (control_word & CW_Underflow) {
- /* The underflow exception is masked. */
- EXCEPTION(EX_Precision);
- return tag;
- }
-
- return tag;
-
-}
-
-void FPU_stack_overflow(void)
-{
-
- if (control_word & CW_Invalid) {
- /* The masked response */
- top--;
- FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
- }
-
- EXCEPTION(EX_StackOver);
-
- return;
-
-}
-
-void FPU_stack_underflow(void)
-{
-
- if (control_word & CW_Invalid) {
- /* The masked response */
- FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
- }
-
- EXCEPTION(EX_StackUnder);
-
- return;
-
-}
-
-void FPU_stack_underflow_i(int i)
-{
-
- if (control_word & CW_Invalid) {
- /* The masked response */
- FPU_copy_to_regi(&CONST_QNaN, TAG_Special, i);
- }
-
- EXCEPTION(EX_StackUnder);
-
- return;
-
-}
-
-void FPU_stack_underflow_pop(int i)
-{
-
- if (control_word & CW_Invalid) {
- /* The masked response */
- FPU_copy_to_regi(&CONST_QNaN, TAG_Special, i);
- FPU_pop();
- }
-
- EXCEPTION(EX_StackUnder);
-
- return;
-
-}
diff --git a/arch/x86/math-emu/exception.h b/arch/x86/math-emu/exception.h
deleted file mode 100644
index 59961d350bc4..000000000000
--- a/arch/x86/math-emu/exception.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | exception.h |
- | |
- | Copyright (C) 1992 W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...c.cc.monash.edu.au |
- | |
- +---------------------------------------------------------------------------*/
-
-#ifndef _EXCEPTION_H_
-#define _EXCEPTION_H_
-
-#ifdef __ASSEMBLER__
-#define Const_(x) $##x
-#else
-#define Const_(x) x
-#endif
-
-#ifndef SW_C1
-#include "fpu_emu.h"
-#endif /* SW_C1 */
-
-#define FPU_BUSY Const_(0x8000) /* FPU busy bit (8087 compatibility) */
-#define EX_ErrorSummary Const_(0x0080) /* Error summary status */
-/* Special exceptions: */
-#define EX_INTERNAL Const_(0x8000) /* Internal error in wm-FPU-emu */
-#define EX_StackOver Const_(0x0041|SW_C1) /* stack overflow */
-#define EX_StackUnder Const_(0x0041) /* stack underflow */
-/* Exception flags: */
-#define EX_Precision Const_(0x0020) /* loss of precision */
-#define EX_Underflow Const_(0x0010) /* underflow */
-#define EX_Overflow Const_(0x0008) /* overflow */
-#define EX_ZeroDiv Const_(0x0004) /* divide by zero */
-#define EX_Denormal Const_(0x0002) /* denormalized operand */
-#define EX_Invalid Const_(0x0001) /* invalid operation */
-
-#define PRECISION_LOST_UP Const_((EX_Precision | SW_C1))
-#define PRECISION_LOST_DOWN Const_(EX_Precision)
-
-#ifndef __ASSEMBLER__
-
-#ifdef DEBUG
-#define EXCEPTION(x) { printk("exception in %s at line %d\n", \
- __FILE__, __LINE__); FPU_exception(x); }
-#else
-#define EXCEPTION(x) FPU_exception(x)
-#endif
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* _EXCEPTION_H_ */
diff --git a/arch/x86/math-emu/fpu_arith.c b/arch/x86/math-emu/fpu_arith.c
deleted file mode 100644
index 09006dc474a0..000000000000
--- a/arch/x86/math-emu/fpu_arith.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | fpu_arith.c |
- | |
- | Code to implement the FPU register/register arithmetic instructions |
- | |
- | Copyright (C) 1992,1993,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_system.h"
-#include "fpu_emu.h"
-#include "control_w.h"
-#include "status_w.h"
-
-void fadd__(void)
-{
- /* fadd st,st(i) */
- int i = FPU_rm;
- clear_C1();
- FPU_add(&st(i), FPU_gettagi(i), 0, control_word);
-}
-
-void fmul__(void)
-{
- /* fmul st,st(i) */
- int i = FPU_rm;
- clear_C1();
- FPU_mul(&st(i), FPU_gettagi(i), 0, control_word);
-}
-
-void fsub__(void)
-{
- /* fsub st,st(i) */
- clear_C1();
- FPU_sub(0, FPU_rm, control_word);
-}
-
-void fsubr_(void)
-{
- /* fsubr st,st(i) */
- clear_C1();
- FPU_sub(REV, FPU_rm, control_word);
-}
-
-void fdiv__(void)
-{
- /* fdiv st,st(i) */
- clear_C1();
- FPU_div(0, FPU_rm, control_word);
-}
-
-void fdivr_(void)
-{
- /* fdivr st,st(i) */
- clear_C1();
- FPU_div(REV, FPU_rm, control_word);
-}
-
-void fadd_i(void)
-{
- /* fadd st(i),st */
- int i = FPU_rm;
- clear_C1();
- FPU_add(&st(i), FPU_gettagi(i), i, control_word);
-}
-
-void fmul_i(void)
-{
- /* fmul st(i),st */
- clear_C1();
- FPU_mul(&st(0), FPU_gettag0(), FPU_rm, control_word);
-}
-
-void fsubri(void)
-{
- /* fsubr st(i),st */
- clear_C1();
- FPU_sub(DEST_RM, FPU_rm, control_word);
-}
-
-void fsub_i(void)
-{
- /* fsub st(i),st */
- clear_C1();
- FPU_sub(REV | DEST_RM, FPU_rm, control_word);
-}
-
-void fdivri(void)
-{
- /* fdivr st(i),st */
- clear_C1();
- FPU_div(DEST_RM, FPU_rm, control_word);
-}
-
-void fdiv_i(void)
-{
- /* fdiv st(i),st */
- clear_C1();
- FPU_div(REV | DEST_RM, FPU_rm, control_word);
-}
-
-void faddp_(void)
-{
- /* faddp st(i),st */
- int i = FPU_rm;
- clear_C1();
- if (FPU_add(&st(i), FPU_gettagi(i), i, control_word) >= 0)
- FPU_pop();
-}
-
-void fmulp_(void)
-{
- /* fmulp st(i),st */
- clear_C1();
- if (FPU_mul(&st(0), FPU_gettag0(), FPU_rm, control_word) >= 0)
- FPU_pop();
-}
-
-void fsubrp(void)
-{
- /* fsubrp st(i),st */
- clear_C1();
- if (FPU_sub(DEST_RM, FPU_rm, control_word) >= 0)
- FPU_pop();
-}
-
-void fsubp_(void)
-{
- /* fsubp st(i),st */
- clear_C1();
- if (FPU_sub(REV | DEST_RM, FPU_rm, control_word) >= 0)
- FPU_pop();
-}
-
-void fdivrp(void)
-{
- /* fdivrp st(i),st */
- clear_C1();
- if (FPU_div(DEST_RM, FPU_rm, control_word) >= 0)
- FPU_pop();
-}
-
-void fdivp_(void)
-{
- /* fdivp st(i),st */
- clear_C1();
- if (FPU_div(REV | DEST_RM, FPU_rm, control_word) >= 0)
- FPU_pop();
-}
diff --git a/arch/x86/math-emu/fpu_asm.h b/arch/x86/math-emu/fpu_asm.h
deleted file mode 100644
index a83353d5271c..000000000000
--- a/arch/x86/math-emu/fpu_asm.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | fpu_asm.h |
- | |
- | Copyright (C) 1992,1995,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- +---------------------------------------------------------------------------*/
-
-#ifndef _FPU_ASM_H_
-#define _FPU_ASM_H_
-
-#include <linux/linkage.h>
-
-#define EXCEPTION FPU_exception
-
-#define PARAM1 8(%ebp)
-#define PARAM2 12(%ebp)
-#define PARAM3 16(%ebp)
-#define PARAM4 20(%ebp)
-#define PARAM5 24(%ebp)
-#define PARAM6 28(%ebp)
-#define PARAM7 32(%ebp)
-
-#define SIGL_OFFSET 0
-#define EXP(x) 8(x)
-#define SIG(x) SIGL_OFFSET##(x)
-#define SIGL(x) SIGL_OFFSET##(x)
-#define SIGH(x) 4(x)
-
-#endif /* _FPU_ASM_H_ */
diff --git a/arch/x86/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c
deleted file mode 100644
index d62662bdd460..000000000000
--- a/arch/x86/math-emu/fpu_aux.c
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | fpu_aux.c |
- | |
- | Code to implement some of the FPU auxiliary instructions. |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_system.h"
-#include "exception.h"
-#include "fpu_emu.h"
-#include "status_w.h"
-#include "control_w.h"
-
-static void fnop(void)
-{
-}
-
-static void fclex(void)
-{
- partial_status &=
- ~(SW_Backward | SW_Summary | SW_Stack_Fault | SW_Precision |
- SW_Underflow | SW_Overflow | SW_Zero_Div | SW_Denorm_Op |
- SW_Invalid);
- no_ip_update = 1;
-}
-
-/* Needs to be externally visible */
-void fpstate_init_soft(struct swregs_state *soft)
-{
- struct address *oaddr, *iaddr;
- memset(soft, 0, sizeof(*soft));
- soft->cwd = 0x037f;
- soft->swd = 0;
- soft->ftop = 0; /* We don't keep top in the status word internally. */
- soft->twd = 0xffff;
- /* The behaviour is different from that detailed in
- Section 15.1.6 of the Intel manual */
- oaddr = (struct address *)&soft->foo;
- oaddr->offset = 0;
- oaddr->selector = 0;
- iaddr = (struct address *)&soft->fip;
- iaddr->offset = 0;
- iaddr->selector = 0;
- iaddr->opcode = 0;
- soft->no_update = 1;
-}
-
-void finit(void)
-{
- fpstate_init_soft(¤t->thread.fpu.fpstate->regs.soft);
-}
-
-/*
- * These are nops on the i387..
- */
-#define feni fnop
-#define fdisi fnop
-#define fsetpm fnop
-
-static FUNC const finit_table[] = {
- feni, fdisi, fclex, finit,
- fsetpm, FPU_illegal, FPU_illegal, FPU_illegal
-};
-
-void finit_(void)
-{
- (finit_table[FPU_rm]) ();
-}
-
-static void fstsw_ax(void)
-{
- *(short *)&FPU_EAX = status_word();
- no_ip_update = 1;
-}
-
-static FUNC const fstsw_table[] = {
- fstsw_ax, FPU_illegal, FPU_illegal, FPU_illegal,
- FPU_illegal, FPU_illegal, FPU_illegal, FPU_illegal
-};
-
-void fstsw_(void)
-{
- (fstsw_table[FPU_rm]) ();
-}
-
-static FUNC const fp_nop_table[] = {
- fnop, FPU_illegal, FPU_illegal, FPU_illegal,
- FPU_illegal, FPU_illegal, FPU_illegal, FPU_illegal
-};
-
-void fp_nop(void)
-{
- (fp_nop_table[FPU_rm]) ();
-}
-
-void fld_i_(void)
-{
- FPU_REG *st_new_ptr;
- int i;
- u_char tag;
-
- if (STACK_OVERFLOW) {
- FPU_stack_overflow();
- return;
- }
-
- /* fld st(i) */
- i = FPU_rm;
- if (NOT_EMPTY(i)) {
- reg_copy(&st(i), st_new_ptr);
- tag = FPU_gettagi(i);
- push();
- FPU_settag0(tag);
- } else {
- if (control_word & CW_Invalid) {
- /* The masked response */
- FPU_stack_underflow();
- } else
- EXCEPTION(EX_StackUnder);
- }
-
-}
-
-void fxch_i(void)
-{
- /* fxch st(i) */
- FPU_REG t;
- int i = FPU_rm;
- FPU_REG *st0_ptr = &st(0), *sti_ptr = &st(i);
- long tag_word = fpu_tag_word;
- int regnr = top & 7, regnri = ((regnr + i) & 7);
- u_char st0_tag = (tag_word >> (regnr * 2)) & 3;
- u_char sti_tag = (tag_word >> (regnri * 2)) & 3;
-
- if (st0_tag == TAG_Empty) {
- if (sti_tag == TAG_Empty) {
- FPU_stack_underflow();
- FPU_stack_underflow_i(i);
- return;
- }
- if (control_word & CW_Invalid) {
- /* Masked response */
- FPU_copy_to_reg0(sti_ptr, sti_tag);
- }
- FPU_stack_underflow_i(i);
- return;
- }
- if (sti_tag == TAG_Empty) {
- if (control_word & CW_Invalid) {
- /* Masked response */
- FPU_copy_to_regi(st0_ptr, st0_tag, i);
- }
- FPU_stack_underflow();
- return;
- }
- clear_C1();
-
- reg_copy(st0_ptr, &t);
- reg_copy(sti_ptr, st0_ptr);
- reg_copy(&t, sti_ptr);
-
- tag_word &= ~(3 << (regnr * 2)) & ~(3 << (regnri * 2));
- tag_word |= (sti_tag << (regnr * 2)) | (st0_tag << (regnri * 2));
- fpu_tag_word = tag_word;
-}
-
-static void fcmovCC(void)
-{
- /* fcmovCC st(i) */
- int i = FPU_rm;
- FPU_REG *st0_ptr = &st(0);
- FPU_REG *sti_ptr = &st(i);
- long tag_word = fpu_tag_word;
- int regnr = top & 7;
- int regnri = (top + i) & 7;
- u_char sti_tag = (tag_word >> (regnri * 2)) & 3;
-
- if (sti_tag == TAG_Empty) {
- FPU_stack_underflow();
- clear_C1();
- return;
- }
- reg_copy(sti_ptr, st0_ptr);
- tag_word &= ~(3 << (regnr * 2));
- tag_word |= (sti_tag << (regnr * 2));
- fpu_tag_word = tag_word;
-}
-
-void fcmovb(void)
-{
- if (FPU_EFLAGS & X86_EFLAGS_CF)
- fcmovCC();
-}
-
-void fcmove(void)
-{
- if (FPU_EFLAGS & X86_EFLAGS_ZF)
- fcmovCC();
-}
-
-void fcmovbe(void)
-{
- if (FPU_EFLAGS & (X86_EFLAGS_CF|X86_EFLAGS_ZF))
- fcmovCC();
-}
-
-void fcmovu(void)
-{
- if (FPU_EFLAGS & X86_EFLAGS_PF)
- fcmovCC();
-}
-
-void fcmovnb(void)
-{
- if (!(FPU_EFLAGS & X86_EFLAGS_CF))
- fcmovCC();
-}
-
-void fcmovne(void)
-{
- if (!(FPU_EFLAGS & X86_EFLAGS_ZF))
- fcmovCC();
-}
-
-void fcmovnbe(void)
-{
- if (!(FPU_EFLAGS & (X86_EFLAGS_CF|X86_EFLAGS_ZF)))
- fcmovCC();
-}
-
-void fcmovnu(void)
-{
- if (!(FPU_EFLAGS & X86_EFLAGS_PF))
- fcmovCC();
-}
-
-void ffree_(void)
-{
- /* ffree st(i) */
- FPU_settagi(FPU_rm, TAG_Empty);
-}
-
-void ffreep(void)
-{
- /* ffree st(i) + pop - unofficial code */
- FPU_settagi(FPU_rm, TAG_Empty);
- FPU_pop();
-}
-
-void fst_i_(void)
-{
- /* fst st(i) */
- FPU_copy_to_regi(&st(0), FPU_gettag0(), FPU_rm);
-}
-
-void fstp_i(void)
-{
- /* fstp st(i) */
- FPU_copy_to_regi(&st(0), FPU_gettag0(), FPU_rm);
- FPU_pop();
-}
diff --git a/arch/x86/math-emu/fpu_emu.h b/arch/x86/math-emu/fpu_emu.h
deleted file mode 100644
index def569c50b76..000000000000
--- a/arch/x86/math-emu/fpu_emu.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | fpu_emu.h |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- +---------------------------------------------------------------------------*/
-
-#ifndef _FPU_EMU_H_
-#define _FPU_EMU_H_
-
-/*
- * Define PECULIAR_486 to get a closer approximation to 80486 behaviour,
- * rather than behaviour which appears to be cleaner.
- * This is a matter of opinion: for all I know, the 80486 may simply
- * be complying with the IEEE spec. Maybe one day I'll get to see the
- * spec...
- */
-#define PECULIAR_486
-
-#ifdef __ASSEMBLER__
-#include "fpu_asm.h"
-#define Const(x) $##x
-#else
-#define Const(x) x
-#endif
-
-#define EXP_BIAS Const(0)
-#define EXP_OVER Const(0x4000) /* smallest invalid large exponent */
-#define EXP_UNDER Const(-0x3fff) /* largest invalid small exponent */
-#define EXP_WAY_UNDER Const(-0x6000) /* Below the smallest denormal, but
- still a 16 bit nr. */
-#define EXP_Infinity EXP_OVER
-#define EXP_NaN EXP_OVER
-
-#define EXTENDED_Ebias Const(0x3fff)
-#define EXTENDED_Emin (-0x3ffe) /* smallest valid exponent */
-
-#define SIGN_POS Const(0)
-#define SIGN_NEG Const(0x80)
-
-#define SIGN_Positive Const(0)
-#define SIGN_Negative Const(0x8000)
-
-/* Keep the order TAG_Valid, TAG_Zero, TW_Denormal */
-/* The following fold to 2 (Special) in the Tag Word */
-#define TW_Denormal Const(4) /* De-normal */
-#define TW_Infinity Const(5) /* + or - infinity */
-#define TW_NaN Const(6) /* Not a Number */
-#define TW_Unsupported Const(7) /* Not supported by an 80486 */
-
-#define TAG_Valid Const(0) /* valid */
-#define TAG_Zero Const(1) /* zero */
-#define TAG_Special Const(2) /* De-normal, + or - infinity,
- or Not a Number */
-#define TAG_Empty Const(3) /* empty */
-#define TAG_Error Const(0x80) /* probably need to abort */
-
-#define LOADED_DATA Const(10101) /* Special st() number to identify
- loaded data (not on stack). */
-
-/* A few flags (must be >= 0x10). */
-#define REV 0x10
-#define DEST_RM 0x20
-#define LOADED 0x40
-
-#define FPU_Exception Const(0x80000000) /* Added to tag returns. */
-
-#ifndef __ASSEMBLER__
-
-#include "fpu_system.h"
-
-#include <uapi/asm/sigcontext.h> /* for struct _fpstate */
-#include <asm/math_emu.h>
-#include <linux/linkage.h>
-
-/*
-#define RE_ENTRANT_CHECKING
- */
-
-#ifdef RE_ENTRANT_CHECKING
-extern u_char emulating;
-# define RE_ENTRANT_CHECK_OFF emulating = 0
-# define RE_ENTRANT_CHECK_ON emulating = 1
-#else
-# define RE_ENTRANT_CHECK_OFF
-# define RE_ENTRANT_CHECK_ON
-#endif /* RE_ENTRANT_CHECKING */
-
-#define FWAIT_OPCODE 0x9b
-#define OP_SIZE_PREFIX 0x66
-#define ADDR_SIZE_PREFIX 0x67
-#define PREFIX_CS 0x2e
-#define PREFIX_DS 0x3e
-#define PREFIX_ES 0x26
-#define PREFIX_SS 0x36
-#define PREFIX_FS 0x64
-#define PREFIX_GS 0x65
-#define PREFIX_REPE 0xf3
-#define PREFIX_REPNE 0xf2
-#define PREFIX_LOCK 0xf0
-#define PREFIX_CS_ 1
-#define PREFIX_DS_ 2
-#define PREFIX_ES_ 3
-#define PREFIX_FS_ 4
-#define PREFIX_GS_ 5
-#define PREFIX_SS_ 6
-#define PREFIX_DEFAULT 7
-
-struct address {
- unsigned int offset;
- unsigned int selector:16;
- unsigned int opcode:11;
- unsigned int empty:5;
-};
-struct fpu__reg {
- unsigned sigl;
- unsigned sigh;
- short exp;
-};
-
-typedef void (*FUNC) (void);
-typedef struct fpu__reg FPU_REG;
-typedef void (*FUNC_ST0) (FPU_REG *st0_ptr, u_char st0_tag);
-typedef struct {
- u_char address_size, operand_size, segment;
-} overrides;
-/* This structure is 32 bits: */
-typedef struct {
- overrides override;
- u_char default_mode;
-} fpu_addr_modes;
-/* PROTECTED has a restricted meaning in the emulator; it is used
- to signal that the emulator needs to do special things to ensure
- that protection is respected in a segmented model. */
-#define PROTECTED 4
-#define SIXTEEN 1 /* We rely upon this being 1 (true) */
-#define VM86 SIXTEEN
-#define PM16 (SIXTEEN | PROTECTED)
-#define SEG32 PROTECTED
-extern u_char const data_sizes_16[32];
-
-#define register_base ((u_char *) registers )
-#define fpu_register(x) ( * ((FPU_REG *)( register_base + 10 * (x & 7) )) )
-#define st(x) ( * ((FPU_REG *)( register_base + 10 * ((top+x) & 7) )) )
-
-#define STACK_OVERFLOW (FPU_stackoverflow(&st_new_ptr))
-#define NOT_EMPTY(i) (!FPU_empty_i(i))
-
-#define NOT_EMPTY_ST0 (st0_tag ^ TAG_Empty)
-
-#define poppop() { FPU_pop(); FPU_pop(); }
-
-/* push() does not affect the tags */
-#define push() { top--; }
-
-#define signbyte(a) (((u_char *)(a))[9])
-#define getsign(a) (signbyte(a) & 0x80)
-#define setsign(a,b) { if ((b) != 0) signbyte(a) |= 0x80; else signbyte(a) &= 0x7f; }
-#define copysign(a,b) { if (getsign(a)) signbyte(b) |= 0x80; \
- else signbyte(b) &= 0x7f; }
-#define changesign(a) { signbyte(a) ^= 0x80; }
-#define setpositive(a) { signbyte(a) &= 0x7f; }
-#define setnegative(a) { signbyte(a) |= 0x80; }
-#define signpositive(a) ( (signbyte(a) & 0x80) == 0 )
-#define signnegative(a) (signbyte(a) & 0x80)
-
-static inline void reg_copy(FPU_REG const *x, FPU_REG *y)
-{
- *(short *)&(y->exp) = *(const short *)&(x->exp);
- *(long long *)&(y->sigl) = *(const long long *)&(x->sigl);
-}
-
-#define exponent(x) (((*(short *)&((x)->exp)) & 0x7fff) - EXTENDED_Ebias)
-#define setexponentpos(x,y) { (*(short *)&((x)->exp)) = \
- ((y) + EXTENDED_Ebias) & 0x7fff; }
-#define exponent16(x) (*(short *)&((x)->exp))
-#define setexponent16(x,y) { (*(short *)&((x)->exp)) = (u16)(y); }
-#define addexponent(x,y) { (*(short *)&((x)->exp)) += (y); }
-#define stdexp(x) { (*(short *)&((x)->exp)) += EXTENDED_Ebias; }
-
-#define isdenormal(ptr) (exponent(ptr) == EXP_BIAS+EXP_UNDER)
-
-#define significand(x) ( ((unsigned long long *)&((x)->sigl))[0] )
-
-/*----- Prototypes for functions written in assembler -----*/
-/* extern void reg_move(FPU_REG *a, FPU_REG *b); */
-
-asmlinkage int FPU_normalize(FPU_REG *x);
-asmlinkage int FPU_normalize_nuo(FPU_REG *x);
-asmlinkage int FPU_u_sub(FPU_REG const *arg1, FPU_REG const *arg2,
- FPU_REG * answ, unsigned int control_w, u_char sign,
- int expa, int expb);
-asmlinkage int FPU_u_mul(FPU_REG const *arg1, FPU_REG const *arg2,
- FPU_REG * answ, unsigned int control_w, u_char sign,
- int expon);
-asmlinkage int FPU_u_div(FPU_REG const *arg1, FPU_REG const *arg2,
- FPU_REG * answ, unsigned int control_w, u_char sign);
-asmlinkage int FPU_u_add(FPU_REG const *arg1, FPU_REG const *arg2,
- FPU_REG * answ, unsigned int control_w, u_char sign,
- int expa, int expb);
-asmlinkage int wm_sqrt(FPU_REG *n, int dummy1, int dummy2,
- unsigned int control_w, u_char sign);
-asmlinkage unsigned FPU_shrx(void *l, unsigned x);
-asmlinkage unsigned FPU_shrxs(void *v, unsigned x);
-asmlinkage unsigned long FPU_div_small(unsigned long long *x, unsigned long y);
-asmlinkage int FPU_round(FPU_REG *arg, unsigned int extent, int dummy,
- unsigned int control_w, u_char sign);
-
-#ifndef MAKING_PROTO
-#include "fpu_proto.h"
-#endif
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* _FPU_EMU_H_ */
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
deleted file mode 100644
index 91c52ead1226..000000000000
--- a/arch/x86/math-emu/fpu_entry.c
+++ /dev/null
@@ -1,718 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | fpu_entry.c |
- | |
- | The entry functions for wm-FPU-emu |
- | |
- | Copyright (C) 1992,1993,1994,1996,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | See the files "README" and "COPYING" for further copyright and warranty |
- | information. |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | Note: |
- | The file contains code which accesses user memory. |
- | Emulator static data may change when user memory is accessed, due to |
- | other processes using the emulator while swapping is in progress. |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | math_emulate(), restore_i387_soft() and save_i387_soft() are the only |
- | entry points for wm-FPU-emu. |
- +---------------------------------------------------------------------------*/
-
-#include <linux/signal.h>
-#include <linux/regset.h>
-
-#include <linux/uaccess.h>
-#include <asm/traps.h>
-#include <asm/user.h>
-#include <asm/fpu/api.h>
-#include <asm/fpu/regset.h>
-
-#include "fpu_system.h"
-#include "fpu_emu.h"
-#include "exception.h"
-#include "control_w.h"
-#include "status_w.h"
-
-#define __BAD__ FPU_illegal /* Illegal on an 80486, causes SIGILL */
-
-/* fcmovCC and f(u)comi(p) are enabled if CPUID(1).EDX(15) "cmov" is set */
-
-/* WARNING: "u" entries are not documented by Intel in their 80486 manual
- and may not work on FPU clones or later Intel FPUs.
- Changes to support them provided by Linus Torvalds. */
-
-static FUNC const st_instr_table[64] = {
-/* Opcode: d8 d9 da db */
-/* dc dd de df */
-/* c0..7 */ fadd__, fld_i_, fcmovb, fcmovnb,
-/* c0..7 */ fadd_i, ffree_, faddp_, ffreep,/*u*/
-/* c8..f */ fmul__, fxch_i, fcmove, fcmovne,
-/* c8..f */ fmul_i, fxch_i,/*u*/ fmulp_, fxch_i,/*u*/
-/* d0..7 */ fcom_st, fp_nop, fcmovbe, fcmovnbe,
-/* d0..7 */ fcom_st,/*u*/ fst_i_, fcompst,/*u*/ fstp_i,/*u*/
-/* d8..f */ fcompst, fstp_i,/*u*/ fcmovu, fcmovnu,
-/* d8..f */ fcompst,/*u*/ fstp_i, fcompp, fstp_i,/*u*/
-/* e0..7 */ fsub__, FPU_etc, __BAD__, finit_,
-/* e0..7 */ fsubri, fucom_, fsubrp, fstsw_,
-/* e8..f */ fsubr_, fconst, fucompp, fucomi_,
-/* e8..f */ fsub_i, fucomp, fsubp_, fucomip,
-/* f0..7 */ fdiv__, FPU_triga, __BAD__, fcomi_,
-/* f0..7 */ fdivri, __BAD__, fdivrp, fcomip,
-/* f8..f */ fdivr_, FPU_trigb, __BAD__, __BAD__,
-/* f8..f */ fdiv_i, __BAD__, fdivp_, __BAD__,
-};
-
-#define _NONE_ 0 /* Take no special action */
-#define _REG0_ 1 /* Need to check for not empty st(0) */
-#define _REGI_ 2 /* Need to check for not empty st(0) and st(rm) */
-#define _REGi_ 0 /* Uses st(rm) */
-#define _PUSH_ 3 /* Need to check for space to push onto stack */
-#define _null_ 4 /* Function illegal or not implemented */
-#define _REGIi 5 /* Uses st(0) and st(rm), result to st(rm) */
-#define _REGIp 6 /* Uses st(0) and st(rm), result to st(rm) then pop */
-#define _REGIc 0 /* Compare st(0) and st(rm) */
-#define _REGIn 0 /* Uses st(0) and st(rm), but handle checks later */
-
-static u_char const type_table[64] = {
-/* Opcode: d8 d9 da db dc dd de df */
-/* c0..7 */ _REGI_, _NONE_, _REGIn, _REGIn, _REGIi, _REGi_, _REGIp, _REGi_,
-/* c8..f */ _REGI_, _REGIn, _REGIn, _REGIn, _REGIi, _REGI_, _REGIp, _REGI_,
-/* d0..7 */ _REGIc, _NONE_, _REGIn, _REGIn, _REGIc, _REG0_, _REGIc, _REG0_,
-/* d8..f */ _REGIc, _REG0_, _REGIn, _REGIn, _REGIc, _REG0_, _REGIc, _REG0_,
-/* e0..7 */ _REGI_, _NONE_, _null_, _NONE_, _REGIi, _REGIc, _REGIp, _NONE_,
-/* e8..f */ _REGI_, _NONE_, _REGIc, _REGIc, _REGIi, _REGIc, _REGIp, _REGIc,
-/* f0..7 */ _REGI_, _NONE_, _null_, _REGIc, _REGIi, _null_, _REGIp, _REGIc,
-/* f8..f */ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_,
-};
-
-#ifdef RE_ENTRANT_CHECKING
-u_char emulating = 0;
-#endif /* RE_ENTRANT_CHECKING */
-
-static int valid_prefix(u_char *Byte, u_char __user ** fpu_eip,
- overrides * override);
-
-void math_emulate(struct math_emu_info *info)
-{
- u_char FPU_modrm, byte1;
- unsigned short code;
- fpu_addr_modes addr_modes;
- int unmasked;
- FPU_REG loaded_data;
- FPU_REG *st0_ptr;
- u_char loaded_tag, st0_tag;
- void __user *data_address;
- struct address data_sel_off;
- struct address entry_sel_off;
- unsigned long code_base = 0;
- unsigned long code_limit = 0; /* Initialized to stop compiler warnings */
- struct desc_struct code_descriptor;
-
-#ifdef RE_ENTRANT_CHECKING
- if (emulating) {
- printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
- }
- RE_ENTRANT_CHECK_ON;
-#endif /* RE_ENTRANT_CHECKING */
-
- FPU_info = info;
-
- FPU_ORIG_EIP = FPU_EIP;
-
- if ((FPU_EFLAGS & 0x00020000) != 0) {
- /* Virtual 8086 mode */
- addr_modes.default_mode = VM86;
- FPU_EIP += code_base = FPU_CS << 4;
- code_limit = code_base + 0xffff; /* Assumes code_base <= 0xffff0000 */
- } else if (FPU_CS == __USER_CS && FPU_DS == __USER_DS) {
- addr_modes.default_mode = 0;
- } else if (FPU_CS == __KERNEL_CS) {
- printk("math_emulate: %04x:%08lx\n", FPU_CS, FPU_EIP);
- panic("Math emulation needed in kernel");
- } else {
-
- if ((FPU_CS & 4) != 4) { /* Must be in the LDT */
- /* Can only handle segmented addressing via the LDT
- for now, and it must be 16 bit */
- printk("FPU emulator: Unsupported addressing mode\n");
- math_abort(FPU_info, SIGILL);
- }
-
- code_descriptor = FPU_get_ldt_descriptor(FPU_CS);
- if (code_descriptor.d) {
- /* The above test may be wrong, the book is not clear */
- /* Segmented 32 bit protected mode */
- addr_modes.default_mode = SEG32;
- } else {
- /* 16 bit protected mode */
- addr_modes.default_mode = PM16;
- }
- FPU_EIP += code_base = seg_get_base(&code_descriptor);
- code_limit = seg_get_limit(&code_descriptor) + 1;
- code_limit *= seg_get_granularity(&code_descriptor);
- code_limit += code_base - 1;
- if (code_limit < code_base)
- code_limit = 0xffffffff;
- }
-
- FPU_lookahead = !(FPU_EFLAGS & X86_EFLAGS_TF);
-
- if (!valid_prefix(&byte1, (u_char __user **) & FPU_EIP,
- &addr_modes.override)) {
- RE_ENTRANT_CHECK_OFF;
- printk
- ("FPU emulator: Unknown prefix byte 0x%02x, probably due to\n"
- "FPU emulator: self-modifying code! (emulation impossible)\n",
- byte1);
- RE_ENTRANT_CHECK_ON;
- EXCEPTION(EX_INTERNAL | 0x126);
- math_abort(FPU_info, SIGILL);
- }
-
- do_another_FPU_instruction:
-
- no_ip_update = 0;
-
- FPU_EIP++; /* We have fetched the prefix and first code bytes. */
-
- if (addr_modes.default_mode) {
- /* This checks for the minimum instruction bytes.
- We also need to check any extra (address mode) code access. */
- if (FPU_EIP > code_limit)
- math_abort(FPU_info, SIGSEGV);
- }
-
- if ((byte1 & 0xf8) != 0xd8) {
- if (byte1 == FWAIT_OPCODE) {
- if (partial_status & SW_Summary)
- goto do_the_FPU_interrupt;
- else
- goto FPU_fwait_done;
- }
-#ifdef PARANOID
- EXCEPTION(EX_INTERNAL | 0x128);
- math_abort(FPU_info, SIGILL);
-#endif /* PARANOID */
- }
-
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(1);
- FPU_get_user(FPU_modrm, (u_char __user *) FPU_EIP);
- RE_ENTRANT_CHECK_ON;
- FPU_EIP++;
-
- if (partial_status & SW_Summary) {
- /* Ignore the error for now if the current instruction is a no-wait
- control instruction */
- /* The 80486 manual contradicts itself on this topic,
- but a real 80486 uses the following instructions:
- fninit, fnstenv, fnsave, fnstsw, fnstenv, fnclex.
- */
- code = (FPU_modrm << 8) | byte1;
- if (!((((code & 0xf803) == 0xe003) || /* fnclex, fninit, fnstsw */
- (((code & 0x3003) == 0x3001) && /* fnsave, fnstcw, fnstenv,
- fnstsw */
- ((code & 0xc000) != 0xc000))))) {
- /*
- * We need to simulate the action of the kernel to FPU
- * interrupts here.
- */
- do_the_FPU_interrupt:
-
- FPU_EIP = FPU_ORIG_EIP; /* Point to current FPU instruction. */
-
- RE_ENTRANT_CHECK_OFF;
- current->thread.trap_nr = X86_TRAP_MF;
- current->thread.error_code = 0;
- send_sig(SIGFPE, current, 1);
- return;
- }
- }
-
- entry_sel_off.offset = FPU_ORIG_EIP;
- entry_sel_off.selector = FPU_CS;
- entry_sel_off.opcode = (byte1 << 8) | FPU_modrm;
- entry_sel_off.empty = 0;
-
- FPU_rm = FPU_modrm & 7;
-
- if (FPU_modrm < 0300) {
- /* All of these instructions use the mod/rm byte to get a data address */
-
- if ((addr_modes.default_mode & SIXTEEN)
- ^ (addr_modes.override.address_size == ADDR_SIZE_PREFIX))
- data_address =
- FPU_get_address_16(FPU_modrm, &FPU_EIP,
- &data_sel_off, addr_modes);
- else
- data_address =
- FPU_get_address(FPU_modrm, &FPU_EIP, &data_sel_off,
- addr_modes);
-
- if (addr_modes.default_mode) {
- if (FPU_EIP - 1 > code_limit)
- math_abort(FPU_info, SIGSEGV);
- }
-
- if (!(byte1 & 1)) {
- unsigned short status1 = partial_status;
-
- st0_ptr = &st(0);
- st0_tag = FPU_gettag0();
-
- /* Stack underflow has priority */
- if (NOT_EMPTY_ST0) {
- if (addr_modes.default_mode & PROTECTED) {
- /* This table works for 16 and 32 bit protected mode */
- if (access_limit <
- data_sizes_16[(byte1 >> 1) & 3])
- math_abort(FPU_info, SIGSEGV);
- }
-
- unmasked = 0; /* Do this here to stop compiler warnings. */
- switch ((byte1 >> 1) & 3) {
- case 0:
- unmasked =
- FPU_load_single((float __user *)
- data_address,
- &loaded_data);
- loaded_tag = unmasked & 0xff;
- unmasked &= ~0xff;
- break;
- case 1:
- loaded_tag =
- FPU_load_int32((long __user *)
- data_address,
- &loaded_data);
- break;
- case 2:
- unmasked =
- FPU_load_double((double __user *)
- data_address,
- &loaded_data);
- loaded_tag = unmasked & 0xff;
- unmasked &= ~0xff;
- break;
- case 3:
- default: /* Used here to suppress gcc warnings. */
- loaded_tag =
- FPU_load_int16((short __user *)
- data_address,
- &loaded_data);
- break;
- }
-
- /* No more access to user memory, it is safe
- to use static data now */
-
- /* NaN operands have the next priority. */
- /* We have to delay looking at st(0) until after
- loading the data, because that data might contain an SNaN */
- if (((st0_tag == TAG_Special) && isNaN(st0_ptr))
- || ((loaded_tag == TAG_Special)
- && isNaN(&loaded_data))) {
- /* Restore the status word; we might have loaded a
- denormal. */
- partial_status = status1;
- if ((FPU_modrm & 0x30) == 0x10) {
- /* fcom or fcomp */
- EXCEPTION(EX_Invalid);
- setcc(SW_C3 | SW_C2 | SW_C0);
- if ((FPU_modrm & 0x08)
- && (control_word &
- CW_Invalid))
- FPU_pop(); /* fcomp, masked, so we pop. */
- } else {
- if (loaded_tag == TAG_Special)
- loaded_tag =
- FPU_Special
- (&loaded_data);
-#ifdef PECULIAR_486
- /* This is not really needed, but gives behaviour
- identical to an 80486 */
- if ((FPU_modrm & 0x28) == 0x20)
- /* fdiv or fsub */
- real_2op_NaN
- (&loaded_data,
- loaded_tag, 0,
- &loaded_data);
- else
-#endif /* PECULIAR_486 */
- /* fadd, fdivr, fmul, or fsubr */
- real_2op_NaN
- (&loaded_data,
- loaded_tag, 0,
- st0_ptr);
- }
- goto reg_mem_instr_done;
- }
-
- if (unmasked && !((FPU_modrm & 0x30) == 0x10)) {
- /* Is not a comparison instruction. */
- if ((FPU_modrm & 0x38) == 0x38) {
- /* fdivr */
- if ((st0_tag == TAG_Zero) &&
- ((loaded_tag == TAG_Valid)
- || (loaded_tag ==
- TAG_Special
- &&
- isdenormal
- (&loaded_data)))) {
- if (FPU_divide_by_zero
- (0,
- getsign
- (&loaded_data))
- < 0) {
- /* We use the fact here that the unmasked
- exception in the loaded data was for a
- denormal operand */
- /* Restore the state of the denormal op bit */
- partial_status
- &=
- ~SW_Denorm_Op;
- partial_status
- |=
- status1 &
- SW_Denorm_Op;
- } else
- setsign(st0_ptr,
- getsign
- (&loaded_data));
- }
- }
- goto reg_mem_instr_done;
- }
-
- switch ((FPU_modrm >> 3) & 7) {
- case 0: /* fadd */
- clear_C1();
- FPU_add(&loaded_data, loaded_tag, 0,
- control_word);
- break;
- case 1: /* fmul */
- clear_C1();
- FPU_mul(&loaded_data, loaded_tag, 0,
- control_word);
- break;
- case 2: /* fcom */
- FPU_compare_st_data(&loaded_data,
- loaded_tag);
- break;
- case 3: /* fcomp */
- if (!FPU_compare_st_data
- (&loaded_data, loaded_tag)
- && !unmasked)
- FPU_pop();
- break;
- case 4: /* fsub */
- clear_C1();
- FPU_sub(LOADED | loaded_tag,
- (int)&loaded_data,
- control_word);
- break;
- case 5: /* fsubr */
- clear_C1();
- FPU_sub(REV | LOADED | loaded_tag,
- (int)&loaded_data,
- control_word);
- break;
- case 6: /* fdiv */
- clear_C1();
- FPU_div(LOADED | loaded_tag,
- (int)&loaded_data,
- control_word);
- break;
- case 7: /* fdivr */
- clear_C1();
- if (st0_tag == TAG_Zero)
- partial_status = status1; /* Undo any denorm tag,
- zero-divide has priority. */
- FPU_div(REV | LOADED | loaded_tag,
- (int)&loaded_data,
- control_word);
- break;
- }
- } else {
- if ((FPU_modrm & 0x30) == 0x10) {
- /* The instruction is fcom or fcomp */
- EXCEPTION(EX_StackUnder);
- setcc(SW_C3 | SW_C2 | SW_C0);
- if ((FPU_modrm & 0x08)
- && (control_word & CW_Invalid))
- FPU_pop(); /* fcomp */
- } else
- FPU_stack_underflow();
- }
- reg_mem_instr_done:
- operand_address = data_sel_off;
- } else {
- if (!(no_ip_update =
- FPU_load_store(((FPU_modrm & 0x38) | (byte1 & 6))
- >> 1, addr_modes, data_address))) {
- operand_address = data_sel_off;
- }
- }
-
- } else {
- /* None of these instructions access user memory */
- u_char instr_index = (FPU_modrm & 0x38) | (byte1 & 7);
-
-#ifdef PECULIAR_486
- /* This is supposed to be undefined, but a real 80486 seems
- to do this: */
- operand_address.offset = 0;
- operand_address.selector = FPU_DS;
-#endif /* PECULIAR_486 */
-
- st0_ptr = &st(0);
- st0_tag = FPU_gettag0();
- switch (type_table[(int)instr_index]) {
- case _NONE_: /* also _REGIc: _REGIn */
- break;
- case _REG0_:
- if (!NOT_EMPTY_ST0) {
- FPU_stack_underflow();
- goto FPU_instruction_done;
- }
- break;
- case _REGIi:
- if (!NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm)) {
- FPU_stack_underflow_i(FPU_rm);
- goto FPU_instruction_done;
- }
- break;
- case _REGIp:
- if (!NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm)) {
- FPU_stack_underflow_pop(FPU_rm);
- goto FPU_instruction_done;
- }
- break;
- case _REGI_:
- if (!NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm)) {
- FPU_stack_underflow();
- goto FPU_instruction_done;
- }
- break;
- case _PUSH_: /* Only used by the fld st(i) instruction */
- break;
- case _null_:
- FPU_illegal();
- goto FPU_instruction_done;
- default:
- EXCEPTION(EX_INTERNAL | 0x111);
- goto FPU_instruction_done;
- }
- (*st_instr_table[(int)instr_index]) ();
-
- FPU_instruction_done:
- ;
- }
-
- if (!no_ip_update)
- instruction_address = entry_sel_off;
-
- FPU_fwait_done:
-
-#ifdef DEBUG
- RE_ENTRANT_CHECK_OFF;
- FPU_printall();
- RE_ENTRANT_CHECK_ON;
-#endif /* DEBUG */
-
- if (FPU_lookahead && !need_resched()) {
- FPU_ORIG_EIP = FPU_EIP - code_base;
- if (valid_prefix(&byte1, (u_char __user **) & FPU_EIP,
- &addr_modes.override))
- goto do_another_FPU_instruction;
- }
-
- if (addr_modes.default_mode)
- FPU_EIP -= code_base;
-
- RE_ENTRANT_CHECK_OFF;
-}
-
-/* Support for prefix bytes is not yet complete. To properly handle
- all prefix bytes, further changes are needed in the emulator code
- which accesses user address space. Access to separate segments is
- important for msdos emulation. */
-static int valid_prefix(u_char *Byte, u_char __user **fpu_eip,
- overrides * override)
-{
- u_char byte;
- u_char __user *ip = *fpu_eip;
-
- *override = (overrides) {
- 0, 0, PREFIX_DEFAULT}; /* defaults */
-
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(1);
- FPU_get_user(byte, ip);
- RE_ENTRANT_CHECK_ON;
-
- while (1) {
- switch (byte) {
- case ADDR_SIZE_PREFIX:
- override->address_size = ADDR_SIZE_PREFIX;
- goto do_next_byte;
-
- case OP_SIZE_PREFIX:
- override->operand_size = OP_SIZE_PREFIX;
- goto do_next_byte;
-
- case PREFIX_CS:
- override->segment = PREFIX_CS_;
- goto do_next_byte;
- case PREFIX_ES:
- override->segment = PREFIX_ES_;
- goto do_next_byte;
- case PREFIX_SS:
- override->segment = PREFIX_SS_;
- goto do_next_byte;
- case PREFIX_FS:
- override->segment = PREFIX_FS_;
- goto do_next_byte;
- case PREFIX_GS:
- override->segment = PREFIX_GS_;
- goto do_next_byte;
- case PREFIX_DS:
- override->segment = PREFIX_DS_;
- goto do_next_byte;
-
-/* lock is not a valid prefix for FPU instructions,
- let the cpu handle it to generate a SIGILL. */
-/* case PREFIX_LOCK: */
-
- /* rep.. prefixes have no meaning for FPU instructions */
- case PREFIX_REPE:
- case PREFIX_REPNE:
-
- do_next_byte:
- ip++;
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(1);
- FPU_get_user(byte, ip);
- RE_ENTRANT_CHECK_ON;
- break;
- case FWAIT_OPCODE:
- *Byte = byte;
- return 1;
- default:
- if ((byte & 0xf8) == 0xd8) {
- *Byte = byte;
- *fpu_eip = ip;
- return 1;
- } else {
- /* Not a valid sequence of prefix bytes followed by
- an FPU instruction. */
- *Byte = byte; /* Needed for error message. */
- return 0;
- }
- }
- }
-}
-
-void math_abort(struct math_emu_info *info, unsigned int signal)
-{
- FPU_EIP = FPU_ORIG_EIP;
- current->thread.trap_nr = X86_TRAP_MF;
- current->thread.error_code = 0;
- send_sig(signal, current, 1);
- RE_ENTRANT_CHECK_OFF;
- __asm__("movl %0,%%esp ; ret": :"g"(((long)info) - 4));
-#ifdef PARANOID
- printk("ERROR: wm-FPU-emu math_abort failed!\n");
-#endif /* PARANOID */
-}
-
-#define S387 ((struct swregs_state *)s387)
-#define sstatus_word() \
- ((S387->swd & ~SW_Top & 0xffff) | ((S387->ftop << SW_Top_Shift) & SW_Top))
-
-int fpregs_soft_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- struct swregs_state *s387 = &target->thread.fpu.fpstate->regs.soft;
- void *space = s387->st_space;
- int ret;
- int offset, other, i, tags, regnr, tag, newtop;
-
- RE_ENTRANT_CHECK_OFF;
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, s387, 0,
- offsetof(struct swregs_state, st_space));
- RE_ENTRANT_CHECK_ON;
-
- if (ret)
- return ret;
-
- S387->ftop = (S387->swd >> SW_Top_Shift) & 7;
- offset = (S387->ftop & 7) * 10;
- other = 80 - offset;
-
- RE_ENTRANT_CHECK_OFF;
-
- /* Copy all registers in stack order. */
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- space + offset, 0, other);
- if (!ret && offset)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- space, 0, offset);
-
- RE_ENTRANT_CHECK_ON;
-
- /* The tags may need to be corrected now. */
- tags = S387->twd;
- newtop = S387->ftop;
- for (i = 0; i < 8; i++) {
- regnr = (i + newtop) & 7;
- if (((tags >> ((regnr & 7) * 2)) & 3) != TAG_Empty) {
- /* The loaded data over-rides all other cases. */
- tag =
- FPU_tagof((FPU_REG *) ((u_char *) S387->st_space +
- 10 * regnr));
- tags &= ~(3 << (regnr * 2));
- tags |= (tag & 3) << (regnr * 2);
- }
- }
- S387->twd = tags;
-
- return ret;
-}
-
-int fpregs_soft_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- struct swregs_state *s387 = &target->thread.fpu.fpstate->regs.soft;
- const void *space = s387->st_space;
- int offset = (S387->ftop & 7) * 10, other = 80 - offset;
-
- RE_ENTRANT_CHECK_OFF;
-
-#ifdef PECULIAR_486
- S387->cwd &= ~0xe080;
- /* An 80486 sets nearly all of the reserved bits to 1. */
- S387->cwd |= 0xffff0040;
- S387->swd = sstatus_word() | 0xffff0000;
- S387->twd |= 0xffff0000;
- S387->fcs &= ~0xf8000000;
- S387->fos |= 0xffff0000;
-#endif /* PECULIAR_486 */
-
- membuf_write(&to, s387, offsetof(struct swregs_state, st_space));
- membuf_write(&to, space + offset, other);
- membuf_write(&to, space, offset);
-
- RE_ENTRANT_CHECK_ON;
-
- return 0;
-}
diff --git a/arch/x86/math-emu/fpu_etc.c b/arch/x86/math-emu/fpu_etc.c
deleted file mode 100644
index 39423ec409e1..000000000000
--- a/arch/x86/math-emu/fpu_etc.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | fpu_etc.c |
- | |
- | Implement a few FPU instructions. |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_system.h"
-#include "exception.h"
-#include "fpu_emu.h"
-#include "status_w.h"
-#include "reg_constant.h"
-
-static void fchs(FPU_REG *st0_ptr, u_char st0tag)
-{
- if (st0tag ^ TAG_Empty) {
- signbyte(st0_ptr) ^= SIGN_NEG;
- clear_C1();
- } else
- FPU_stack_underflow();
-}
-
-static void fabs(FPU_REG *st0_ptr, u_char st0tag)
-{
- if (st0tag ^ TAG_Empty) {
- setpositive(st0_ptr);
- clear_C1();
- } else
- FPU_stack_underflow();
-}
-
-static void ftst_(FPU_REG *st0_ptr, u_char st0tag)
-{
- switch (st0tag) {
- case TAG_Zero:
- setcc(SW_C3);
- break;
- case TAG_Valid:
- if (getsign(st0_ptr) == SIGN_POS)
- setcc(0);
- else
- setcc(SW_C0);
- break;
- case TAG_Special:
- switch (FPU_Special(st0_ptr)) {
- case TW_Denormal:
- if (getsign(st0_ptr) == SIGN_POS)
- setcc(0);
- else
- setcc(SW_C0);
- if (denormal_operand() < 0) {
-#ifdef PECULIAR_486
- /* This is weird! */
- if (getsign(st0_ptr) == SIGN_POS)
- setcc(SW_C3);
-#endif /* PECULIAR_486 */
- return;
- }
- break;
- case TW_NaN:
- setcc(SW_C0 | SW_C2 | SW_C3); /* Operand is not comparable */
- EXCEPTION(EX_Invalid);
- break;
- case TW_Infinity:
- if (getsign(st0_ptr) == SIGN_POS)
- setcc(0);
- else
- setcc(SW_C0);
- break;
- default:
- setcc(SW_C0 | SW_C2 | SW_C3); /* Operand is not comparable */
- EXCEPTION(EX_INTERNAL | 0x14);
- break;
- }
- break;
- case TAG_Empty:
- setcc(SW_C0 | SW_C2 | SW_C3);
- EXCEPTION(EX_StackUnder);
- break;
- }
-}
-
-static void fxam(FPU_REG *st0_ptr, u_char st0tag)
-{
- int c = 0;
- switch (st0tag) {
- case TAG_Empty:
- c = SW_C3 | SW_C0;
- break;
- case TAG_Zero:
- c = SW_C3;
- break;
- case TAG_Valid:
- c = SW_C2;
- break;
- case TAG_Special:
- switch (FPU_Special(st0_ptr)) {
- case TW_Denormal:
- c = SW_C2 | SW_C3; /* Denormal */
- break;
- case TW_NaN:
- /* We also use NaN for unsupported types. */
- if ((st0_ptr->sigh & 0x80000000)
- && (exponent(st0_ptr) == EXP_OVER))
- c = SW_C0;
- break;
- case TW_Infinity:
- c = SW_C2 | SW_C0;
- break;
- }
- }
- if (getsign(st0_ptr) == SIGN_NEG)
- c |= SW_C1;
- setcc(c);
-}
-
-static void FPU_ST0_illegal(FPU_REG *st0_ptr, u_char st0_tag)
-{
- FPU_illegal();
-}
-
-static FUNC_ST0 const fp_etc_table[] = {
- fchs, fabs, FPU_ST0_illegal, FPU_ST0_illegal,
- ftst_, fxam, FPU_ST0_illegal, FPU_ST0_illegal,
-};
-
-void FPU_etc(void)
-{
- (fp_etc_table[FPU_rm]) (&st(0), FPU_gettag0());
-}
diff --git a/arch/x86/math-emu/fpu_proto.h b/arch/x86/math-emu/fpu_proto.h
deleted file mode 100644
index 94c4023092f3..000000000000
--- a/arch/x86/math-emu/fpu_proto.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _FPU_PROTO_H
-#define _FPU_PROTO_H
-
-/* errors.c */
-extern void FPU_illegal(void);
-extern void FPU_printall(void);
-asmlinkage void FPU_exception(int n);
-extern int real_1op_NaN(FPU_REG *a);
-extern int real_2op_NaN(FPU_REG const *b, u_char tagb, int deststnr,
- FPU_REG const *defaultNaN);
-asmlinkage int arith_invalid(int deststnr);
-asmlinkage int FPU_divide_by_zero(int deststnr, u_char sign);
-extern int set_precision_flag(int flags);
-asmlinkage void set_precision_flag_up(void);
-asmlinkage void set_precision_flag_down(void);
-asmlinkage int denormal_operand(void);
-asmlinkage int arith_overflow(FPU_REG *dest);
-asmlinkage int arith_underflow(FPU_REG *dest);
-extern void FPU_stack_overflow(void);
-extern void FPU_stack_underflow(void);
-extern void FPU_stack_underflow_i(int i);
-extern void FPU_stack_underflow_pop(int i);
-/* fpu_arith.c */
-extern void fadd__(void);
-extern void fmul__(void);
-extern void fsub__(void);
-extern void fsubr_(void);
-extern void fdiv__(void);
-extern void fdivr_(void);
-extern void fadd_i(void);
-extern void fmul_i(void);
-extern void fsubri(void);
-extern void fsub_i(void);
-extern void fdivri(void);
-extern void fdiv_i(void);
-extern void faddp_(void);
-extern void fmulp_(void);
-extern void fsubrp(void);
-extern void fsubp_(void);
-extern void fdivrp(void);
-extern void fdivp_(void);
-/* fpu_aux.c */
-extern void finit(void);
-extern void finit_(void);
-extern void fstsw_(void);
-extern void fp_nop(void);
-extern void fld_i_(void);
-extern void fxch_i(void);
-extern void fcmovb(void);
-extern void fcmove(void);
-extern void fcmovbe(void);
-extern void fcmovu(void);
-extern void fcmovnb(void);
-extern void fcmovne(void);
-extern void fcmovnbe(void);
-extern void fcmovnu(void);
-extern void ffree_(void);
-extern void ffreep(void);
-extern void fst_i_(void);
-extern void fstp_i(void);
-/* fpu_entry.c */
-extern void math_emulate(struct math_emu_info *info);
-extern void math_abort(struct math_emu_info *info, unsigned int signal);
-/* fpu_etc.c */
-extern void FPU_etc(void);
-/* fpu_tags.c */
-extern int FPU_gettag0(void);
-extern int FPU_gettagi(int stnr);
-extern int FPU_gettag(int regnr);
-extern void FPU_settag0(int tag);
-extern void FPU_settagi(int stnr, int tag);
-extern void FPU_settag(int regnr, int tag);
-extern int FPU_Special(FPU_REG const *ptr);
-extern int isNaN(FPU_REG const *ptr);
-extern void FPU_pop(void);
-extern int FPU_empty_i(int stnr);
-extern int FPU_stackoverflow(FPU_REG ** st_new_ptr);
-extern void FPU_copy_to_regi(FPU_REG const *r, u_char tag, int stnr);
-extern void FPU_copy_to_reg1(FPU_REG const *r, u_char tag);
-extern void FPU_copy_to_reg0(FPU_REG const *r, u_char tag);
-/* fpu_trig.c */
-extern void FPU_triga(void);
-extern void FPU_trigb(void);
-/* get_address.c */
-extern void __user *FPU_get_address(u_char FPU_modrm, unsigned long *fpu_eip,
- struct address *addr,
- fpu_addr_modes addr_modes);
-extern void __user *FPU_get_address_16(u_char FPU_modrm, unsigned long *fpu_eip,
- struct address *addr,
- fpu_addr_modes addr_modes);
-/* load_store.c */
-extern int FPU_load_store(u_char type, fpu_addr_modes addr_modes,
- void __user * data_address);
-/* poly_2xm1.c */
-extern int poly_2xm1(u_char sign, FPU_REG * arg, FPU_REG *result);
-/* poly_atan.c */
-extern void poly_atan(FPU_REG * st0_ptr, u_char st0_tag, FPU_REG *st1_ptr,
- u_char st1_tag);
-/* poly_l2.c */
-extern void poly_l2(FPU_REG *st0_ptr, FPU_REG *st1_ptr, u_char st1_sign);
-extern int poly_l2p1(u_char s0, u_char s1, FPU_REG *r0, FPU_REG *r1,
- FPU_REG * d);
-/* poly_sin.c */
-extern void poly_sine(FPU_REG *st0_ptr);
-extern void poly_cos(FPU_REG *st0_ptr);
-/* poly_tan.c */
-extern void poly_tan(FPU_REG *st0_ptr);
-/* reg_add_sub.c */
-extern int FPU_add(FPU_REG const *b, u_char tagb, int destrnr, int control_w);
-extern int FPU_sub(int flags, int rm, int control_w);
-/* reg_compare.c */
-extern int FPU_compare_st_data(FPU_REG const *loaded_data, u_char loaded_tag);
-extern void fcom_st(void);
-extern void fcompst(void);
-extern void fcompp(void);
-extern void fucom_(void);
-extern void fucomp(void);
-extern void fucompp(void);
-extern void fcomi_(void);
-extern void fcomip(void);
-extern void fucomi_(void);
-extern void fucomip(void);
-/* reg_constant.c */
-extern void fconst(void);
-/* reg_ld_str.c */
-extern int FPU_load_extended(long double __user *s, int stnr);
-extern int FPU_load_double(double __user *dfloat, FPU_REG *loaded_data);
-extern int FPU_load_single(float __user *single, FPU_REG *loaded_data);
-extern int FPU_load_int64(long long __user *_s);
-extern int FPU_load_int32(long __user *_s, FPU_REG *loaded_data);
-extern int FPU_load_int16(short __user *_s, FPU_REG *loaded_data);
-extern int FPU_load_bcd(u_char __user *s);
-extern int FPU_store_extended(FPU_REG *st0_ptr, u_char st0_tag,
- long double __user * d);
-extern int FPU_store_double(FPU_REG *st0_ptr, u_char st0_tag,
- double __user * dfloat);
-extern int FPU_store_single(FPU_REG *st0_ptr, u_char st0_tag,
- float __user * single);
-extern int FPU_store_int64(FPU_REG *st0_ptr, u_char st0_tag,
- long long __user * d);
-extern int FPU_store_int32(FPU_REG *st0_ptr, u_char st0_tag, long __user *d);
-extern int FPU_store_int16(FPU_REG *st0_ptr, u_char st0_tag, short __user *d);
-extern int FPU_store_bcd(FPU_REG *st0_ptr, u_char st0_tag, u_char __user *d);
-extern int FPU_round_to_int(FPU_REG *r, u_char tag);
-extern u_char __user *fldenv(fpu_addr_modes addr_modes, u_char __user *s);
-extern void FPU_frstor(fpu_addr_modes addr_modes, u_char __user *data_address);
-extern u_char __user *fstenv(fpu_addr_modes addr_modes, u_char __user *d);
-extern void fsave(fpu_addr_modes addr_modes, u_char __user *data_address);
-extern int FPU_tagof(FPU_REG *ptr);
-/* reg_mul.c */
-extern int FPU_mul(FPU_REG const *b, u_char tagb, int deststnr, int control_w);
-
-extern int FPU_div(int flags, int regrm, int control_w);
-/* reg_convert.c */
-extern int FPU_to_exp16(FPU_REG const *a, FPU_REG *x);
-#endif /* _FPU_PROTO_H */
diff --git a/arch/x86/math-emu/fpu_system.h b/arch/x86/math-emu/fpu_system.h
deleted file mode 100644
index eec3e4805c75..000000000000
--- a/arch/x86/math-emu/fpu_system.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | fpu_system.h |
- | |
- | Copyright (C) 1992,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- +---------------------------------------------------------------------------*/
-
-#ifndef _FPU_SYSTEM_H
-#define _FPU_SYSTEM_H
-
-/* system dependent definitions */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-
-#include <asm/desc.h>
-#include <asm/mmu_context.h>
-
-static inline struct desc_struct FPU_get_ldt_descriptor(unsigned seg)
-{
- static struct desc_struct zero_desc;
- struct desc_struct ret = zero_desc;
-
-#ifdef CONFIG_MODIFY_LDT_SYSCALL
- seg >>= 3;
- mutex_lock(¤t->mm->context.lock);
- if (current->mm->context.ldt && seg < current->mm->context.ldt->nr_entries)
- ret = current->mm->context.ldt->entries[seg];
- mutex_unlock(¤t->mm->context.lock);
-#endif
- return ret;
-}
-
-#define SEG_TYPE_WRITABLE (1U << 1)
-#define SEG_TYPE_EXPANDS_DOWN (1U << 2)
-#define SEG_TYPE_EXECUTE (1U << 3)
-#define SEG_TYPE_EXPAND_MASK (SEG_TYPE_EXPANDS_DOWN | SEG_TYPE_EXECUTE)
-#define SEG_TYPE_EXECUTE_MASK (SEG_TYPE_WRITABLE | SEG_TYPE_EXECUTE)
-
-static inline unsigned long seg_get_base(struct desc_struct *d)
-{
- unsigned long base = (unsigned long)d->base2 << 24;
-
- return base | ((unsigned long)d->base1 << 16) | d->base0;
-}
-
-static inline unsigned long seg_get_limit(struct desc_struct *d)
-{
- return ((unsigned long)d->limit1 << 16) | d->limit0;
-}
-
-static inline unsigned long seg_get_granularity(struct desc_struct *d)
-{
- return d->g ? 4096 : 1;
-}
-
-static inline bool seg_expands_down(struct desc_struct *d)
-{
- return (d->type & SEG_TYPE_EXPAND_MASK) == SEG_TYPE_EXPANDS_DOWN;
-}
-
-static inline bool seg_execute_only(struct desc_struct *d)
-{
- return (d->type & SEG_TYPE_EXECUTE_MASK) == SEG_TYPE_EXECUTE;
-}
-
-static inline bool seg_writable(struct desc_struct *d)
-{
- return (d->type & SEG_TYPE_EXECUTE_MASK) == SEG_TYPE_WRITABLE;
-}
-
-#define I387 (¤t->thread.fpu.fpstate->regs)
-#define FPU_info (I387->soft.info)
-
-#define FPU_CS (*(unsigned short *) &(FPU_info->regs->cs))
-#define FPU_SS (*(unsigned short *) &(FPU_info->regs->ss))
-#define FPU_DS (*(unsigned short *) &(FPU_info->regs->ds))
-#define FPU_EAX (FPU_info->regs->ax)
-#define FPU_EFLAGS (FPU_info->regs->flags)
-#define FPU_EIP (FPU_info->regs->ip)
-#define FPU_ORIG_EIP (FPU_info->___orig_eip)
-
-#define FPU_lookahead (I387->soft.lookahead)
-
-/* nz if ip_offset and cs_selector are not to be set for the current
- instruction. */
-#define no_ip_update (*(u_char *)&(I387->soft.no_update))
-#define FPU_rm (*(u_char *)&(I387->soft.rm))
-
-/* Number of bytes of data which can be legally accessed by the current
- instruction. This only needs to hold a number <= 108, so a byte will do. */
-#define access_limit (*(u_char *)&(I387->soft.alimit))
-
-#define partial_status (I387->soft.swd)
-#define control_word (I387->soft.cwd)
-#define fpu_tag_word (I387->soft.twd)
-#define registers (I387->soft.st_space)
-#define top (I387->soft.ftop)
-
-#define instruction_address (*(struct address *)&I387->soft.fip)
-#define operand_address (*(struct address *)&I387->soft.foo)
-
-#define FPU_access_ok(y,z) if ( !access_ok(y,z) ) \
- math_abort(FPU_info,SIGSEGV)
-#define FPU_abort math_abort(FPU_info, SIGSEGV)
-#define FPU_copy_from_user(to, from, n) \
- do { if (copy_from_user(to, from, n)) FPU_abort; } while (0)
-
-#undef FPU_IGNORE_CODE_SEGV
-#ifdef FPU_IGNORE_CODE_SEGV
-/* access_ok() is very expensive, and causes the emulator to run
- about 20% slower if applied to the code. Anyway, errors due to bad
- code addresses should be much rarer than errors due to bad data
- addresses. */
-#define FPU_code_access_ok(z)
-#else
-/* A simpler test than access_ok() can probably be done for
- FPU_code_access_ok() because the only possible error is to step
- past the upper boundary of a legal code area. */
-#define FPU_code_access_ok(z) FPU_access_ok((void __user *)FPU_EIP,z)
-#endif
-
-#define FPU_get_user(x,y) do { if (get_user((x),(y))) FPU_abort; } while (0)
-#define FPU_put_user(x,y) do { if (put_user((x),(y))) FPU_abort; } while (0)
-
-#endif
diff --git a/arch/x86/math-emu/fpu_tags.c b/arch/x86/math-emu/fpu_tags.c
deleted file mode 100644
index bff95d4e7dca..000000000000
--- a/arch/x86/math-emu/fpu_tags.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | fpu_tags.c |
- | |
- | Set FPU register tags. |
- | |
- | Copyright (C) 1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...obi.maths.monash.edu.au |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_emu.h"
-#include "fpu_system.h"
-#include "exception.h"
-
-void FPU_pop(void)
-{
- fpu_tag_word |= 3 << ((top & 7) * 2);
- top++;
-}
-
-int FPU_gettag0(void)
-{
- return (fpu_tag_word >> ((top & 7) * 2)) & 3;
-}
-
-int FPU_gettagi(int stnr)
-{
- return (fpu_tag_word >> (((top + stnr) & 7) * 2)) & 3;
-}
-
-int FPU_gettag(int regnr)
-{
- return (fpu_tag_word >> ((regnr & 7) * 2)) & 3;
-}
-
-void FPU_settag0(int tag)
-{
- int regnr = top;
- regnr &= 7;
- fpu_tag_word &= ~(3 << (regnr * 2));
- fpu_tag_word |= (tag & 3) << (regnr * 2);
-}
-
-void FPU_settagi(int stnr, int tag)
-{
- int regnr = stnr + top;
- regnr &= 7;
- fpu_tag_word &= ~(3 << (regnr * 2));
- fpu_tag_word |= (tag & 3) << (regnr * 2);
-}
-
-void FPU_settag(int regnr, int tag)
-{
- regnr &= 7;
- fpu_tag_word &= ~(3 << (regnr * 2));
- fpu_tag_word |= (tag & 3) << (regnr * 2);
-}
-
-int FPU_Special(FPU_REG const *ptr)
-{
- int exp = exponent(ptr);
-
- if (exp == EXP_BIAS + EXP_UNDER)
- return TW_Denormal;
- else if (exp != EXP_BIAS + EXP_OVER)
- return TW_NaN;
- else if ((ptr->sigh == 0x80000000) && (ptr->sigl == 0))
- return TW_Infinity;
- return TW_NaN;
-}
-
-int isNaN(FPU_REG const *ptr)
-{
- return ((exponent(ptr) == EXP_BIAS + EXP_OVER)
- && !((ptr->sigh == 0x80000000) && (ptr->sigl == 0)));
-}
-
-int FPU_empty_i(int stnr)
-{
- int regnr = (top + stnr) & 7;
-
- return ((fpu_tag_word >> (regnr * 2)) & 3) == TAG_Empty;
-}
-
-int FPU_stackoverflow(FPU_REG ** st_new_ptr)
-{
- *st_new_ptr = &st(-1);
-
- return ((fpu_tag_word >> (((top - 1) & 7) * 2)) & 3) != TAG_Empty;
-}
-
-void FPU_copy_to_regi(FPU_REG const *r, u_char tag, int stnr)
-{
- reg_copy(r, &st(stnr));
- FPU_settagi(stnr, tag);
-}
-
-void FPU_copy_to_reg1(FPU_REG const *r, u_char tag)
-{
- reg_copy(r, &st(1));
- FPU_settagi(1, tag);
-}
-
-void FPU_copy_to_reg0(FPU_REG const *r, u_char tag)
-{
- int regnr = top;
- regnr &= 7;
-
- reg_copy(r, &st(0));
-
- fpu_tag_word &= ~(3 << (regnr * 2));
- fpu_tag_word |= (tag & 3) << (regnr * 2);
-}
diff --git a/arch/x86/math-emu/fpu_trig.c b/arch/x86/math-emu/fpu_trig.c
deleted file mode 100644
index 85daf98c81c3..000000000000
--- a/arch/x86/math-emu/fpu_trig.c
+++ /dev/null
@@ -1,1649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | fpu_trig.c |
- | |
- | Implementation of the FPU "transcendental" functions. |
- | |
- | Copyright (C) 1992,1993,1994,1997,1999 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...bpc.org.au |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_system.h"
-#include "exception.h"
-#include "fpu_emu.h"
-#include "status_w.h"
-#include "control_w.h"
-#include "reg_constant.h"
-
-static void rem_kernel(unsigned long long st0, unsigned long long *y,
- unsigned long long st1, unsigned long long q, int n);
-
-#define BETTER_THAN_486
-
-#define FCOS 4
-
-/* Used only by fptan, fsin, fcos, and fsincos. */
-/* This routine produces very accurate results, similar to
- using a value of pi with more than 128 bits precision. */
-/* Limited measurements show no results worse than 64 bit precision
- except for the results for arguments close to 2^63, where the
- precision of the result sometimes degrades to about 63.9 bits */
-static int trig_arg(FPU_REG *st0_ptr, int even)
-{
- FPU_REG tmp;
- u_char tmptag;
- unsigned long long q;
- int old_cw = control_word, saved_status = partial_status;
- int tag, st0_tag = TAG_Valid;
-
- if (exponent(st0_ptr) >= 63) {
- partial_status |= SW_C2; /* Reduction incomplete. */
- return -1;
- }
-
- control_word &= ~CW_RC;
- control_word |= RC_CHOP;
-
- setpositive(st0_ptr);
- tag = FPU_u_div(st0_ptr, &CONST_PI2, &tmp, PR_64_BITS | RC_CHOP | 0x3f,
- SIGN_POS);
-
- FPU_round_to_int(&tmp, tag); /* Fortunately, this can't overflow
- to 2^64 */
- q = significand(&tmp);
- if (q) {
- rem_kernel(significand(st0_ptr),
- &significand(&tmp),
- significand(&CONST_PI2),
- q, exponent(st0_ptr) - exponent(&CONST_PI2));
- setexponent16(&tmp, exponent(&CONST_PI2));
- st0_tag = FPU_normalize(&tmp);
- FPU_copy_to_reg0(&tmp, st0_tag);
- }
-
- if ((even && !(q & 1)) || (!even && (q & 1))) {
- st0_tag =
- FPU_sub(REV | LOADED | TAG_Valid, (int)&CONST_PI2,
- FULL_PRECISION);
-
-#ifdef BETTER_THAN_486
- /* So far, the results are exact but based upon a 64 bit
- precision approximation to pi/2. The technique used
- now is equivalent to using an approximation to pi/2 which
- is accurate to about 128 bits. */
- if ((exponent(st0_ptr) <= exponent(&CONST_PI2extra) + 64)
- || (q > 1)) {
- /* This code gives the effect of having pi/2 to better than
- 128 bits precision. */
-
- significand(&tmp) = q + 1;
- setexponent16(&tmp, 63);
- FPU_normalize(&tmp);
- tmptag =
- FPU_u_mul(&CONST_PI2extra, &tmp, &tmp,
- FULL_PRECISION, SIGN_POS,
- exponent(&CONST_PI2extra) +
- exponent(&tmp));
- setsign(&tmp, getsign(&CONST_PI2extra));
- st0_tag = FPU_add(&tmp, tmptag, 0, FULL_PRECISION);
- if (signnegative(st0_ptr)) {
- /* CONST_PI2extra is negative, so the result of the addition
- can be negative. This means that the argument is actually
- in a different quadrant. The correction is always < pi/2,
- so it can't overflow into yet another quadrant. */
- setpositive(st0_ptr);
- q++;
- }
- }
-#endif /* BETTER_THAN_486 */
- }
-#ifdef BETTER_THAN_486
- else {
- /* So far, the results are exact but based upon a 64 bit
- precision approximation to pi/2. The technique used
- now is equivalent to using an approximation to pi/2 which
- is accurate to about 128 bits. */
- if (((q > 0)
- && (exponent(st0_ptr) <= exponent(&CONST_PI2extra) + 64))
- || (q > 1)) {
- /* This code gives the effect of having p/2 to better than
- 128 bits precision. */
-
- significand(&tmp) = q;
- setexponent16(&tmp, 63);
- FPU_normalize(&tmp); /* This must return TAG_Valid */
- tmptag =
- FPU_u_mul(&CONST_PI2extra, &tmp, &tmp,
- FULL_PRECISION, SIGN_POS,
- exponent(&CONST_PI2extra) +
- exponent(&tmp));
- setsign(&tmp, getsign(&CONST_PI2extra));
- st0_tag = FPU_sub(LOADED | (tmptag & 0x0f), (int)&tmp,
- FULL_PRECISION);
- if ((exponent(st0_ptr) == exponent(&CONST_PI2)) &&
- ((st0_ptr->sigh > CONST_PI2.sigh)
- || ((st0_ptr->sigh == CONST_PI2.sigh)
- && (st0_ptr->sigl > CONST_PI2.sigl)))) {
- /* CONST_PI2extra is negative, so the result of the
- subtraction can be larger than pi/2. This means
- that the argument is actually in a different quadrant.
- The correction is always < pi/2, so it can't overflow
- into yet another quadrant. */
- st0_tag =
- FPU_sub(REV | LOADED | TAG_Valid,
- (int)&CONST_PI2, FULL_PRECISION);
- q++;
- }
- }
- }
-#endif /* BETTER_THAN_486 */
-
- FPU_settag0(st0_tag);
- control_word = old_cw;
- partial_status = saved_status & ~SW_C2; /* Reduction complete. */
-
- return (q & 3) | even;
-}
-
-/* Convert a long to register */
-static void convert_l2reg(long const *arg, int deststnr)
-{
- int tag;
- long num = *arg;
- u_char sign;
- FPU_REG *dest = &st(deststnr);
-
- if (num == 0) {
- FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
- return;
- }
-
- if (num > 0) {
- sign = SIGN_POS;
- } else {
- num = -num;
- sign = SIGN_NEG;
- }
-
- dest->sigh = num;
- dest->sigl = 0;
- setexponent16(dest, 31);
- tag = FPU_normalize(dest);
- FPU_settagi(deststnr, tag);
- setsign(dest, sign);
- return;
-}
-
-static void single_arg_error(FPU_REG *st0_ptr, u_char st0_tag)
-{
- if (st0_tag == TAG_Empty)
- FPU_stack_underflow(); /* Puts a QNaN in st(0) */
- else if (st0_tag == TW_NaN)
- real_1op_NaN(st0_ptr); /* return with a NaN in st(0) */
-#ifdef PARANOID
- else
- EXCEPTION(EX_INTERNAL | 0x0112);
-#endif /* PARANOID */
-}
-
-static void single_arg_2_error(FPU_REG *st0_ptr, u_char st0_tag)
-{
- int isNaN;
-
- switch (st0_tag) {
- case TW_NaN:
- isNaN = (exponent(st0_ptr) == EXP_OVER)
- && (st0_ptr->sigh & 0x80000000);
- if (isNaN && !(st0_ptr->sigh & 0x40000000)) { /* Signaling ? */
- EXCEPTION(EX_Invalid);
- if (control_word & CW_Invalid) {
- /* The masked response */
- /* Convert to a QNaN */
- st0_ptr->sigh |= 0x40000000;
- push();
- FPU_copy_to_reg0(st0_ptr, TAG_Special);
- }
- } else if (isNaN) {
- /* A QNaN */
- push();
- FPU_copy_to_reg0(st0_ptr, TAG_Special);
- } else {
- /* pseudoNaN or other unsupported */
- EXCEPTION(EX_Invalid);
- if (control_word & CW_Invalid) {
- /* The masked response */
- FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
- push();
- FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
- }
- }
- break; /* return with a NaN in st(0) */
-#ifdef PARANOID
- default:
- EXCEPTION(EX_INTERNAL | 0x0112);
-#endif /* PARANOID */
- }
-}
-
-/*---------------------------------------------------------------------------*/
-
-static void f2xm1(FPU_REG *st0_ptr, u_char tag)
-{
- FPU_REG a;
-
- clear_C1();
-
- if (tag == TAG_Valid) {
- /* For an 80486 FPU, the result is undefined if the arg is >= 1.0 */
- if (exponent(st0_ptr) < 0) {
- denormal_arg:
-
- FPU_to_exp16(st0_ptr, &a);
-
- /* poly_2xm1(x) requires 0 < st(0) < 1. */
- poly_2xm1(getsign(st0_ptr), &a, st0_ptr);
- }
- set_precision_flag_up(); /* 80486 appears to always do this */
- return;
- }
-
- if (tag == TAG_Zero)
- return;
-
- if (tag == TAG_Special)
- tag = FPU_Special(st0_ptr);
-
- switch (tag) {
- case TW_Denormal:
- if (denormal_operand() < 0)
- return;
- goto denormal_arg;
- case TW_Infinity:
- if (signnegative(st0_ptr)) {
- /* -infinity gives -1 (p16-10) */
- FPU_copy_to_reg0(&CONST_1, TAG_Valid);
- setnegative(st0_ptr);
- }
- return;
- default:
- single_arg_error(st0_ptr, tag);
- }
-}
-
-static void fptan(FPU_REG *st0_ptr, u_char st0_tag)
-{
- FPU_REG *st_new_ptr;
- int q;
- u_char arg_sign = getsign(st0_ptr);
-
- /* Stack underflow has higher priority */
- if (st0_tag == TAG_Empty) {
- FPU_stack_underflow(); /* Puts a QNaN in st(0) */
- if (control_word & CW_Invalid) {
- st_new_ptr = &st(-1);
- push();
- FPU_stack_underflow(); /* Puts a QNaN in the new st(0) */
- }
- return;
- }
-
- if (STACK_OVERFLOW) {
- FPU_stack_overflow();
- return;
- }
-
- if (st0_tag == TAG_Valid) {
- if (exponent(st0_ptr) > -40) {
- if ((q = trig_arg(st0_ptr, 0)) == -1) {
- /* Operand is out of range */
- return;
- }
-
- poly_tan(st0_ptr);
- setsign(st0_ptr, (q & 1) ^ (arg_sign != 0));
- set_precision_flag_up(); /* We do not really know if up or down */
- } else {
- /* For a small arg, the result == the argument */
- /* Underflow may happen */
-
- denormal_arg:
-
- FPU_to_exp16(st0_ptr, st0_ptr);
-
- st0_tag =
- FPU_round(st0_ptr, 1, 0, FULL_PRECISION, arg_sign);
- FPU_settag0(st0_tag);
- }
- push();
- FPU_copy_to_reg0(&CONST_1, TAG_Valid);
- return;
- }
-
- if (st0_tag == TAG_Zero) {
- push();
- FPU_copy_to_reg0(&CONST_1, TAG_Valid);
- setcc(0);
- return;
- }
-
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
-
- if (st0_tag == TW_Denormal) {
- if (denormal_operand() < 0)
- return;
-
- goto denormal_arg;
- }
-
- if (st0_tag == TW_Infinity) {
- /* The 80486 treats infinity as an invalid operand */
- if (arith_invalid(0) >= 0) {
- st_new_ptr = &st(-1);
- push();
- arith_invalid(0);
- }
- return;
- }
-
- single_arg_2_error(st0_ptr, st0_tag);
-}
-
-static void fxtract(FPU_REG *st0_ptr, u_char st0_tag)
-{
- FPU_REG *st_new_ptr;
- u_char sign;
- register FPU_REG *st1_ptr = st0_ptr; /* anticipate */
-
- if (STACK_OVERFLOW) {
- FPU_stack_overflow();
- return;
- }
-
- clear_C1();
-
- if (st0_tag == TAG_Valid) {
- long e;
-
- push();
- sign = getsign(st1_ptr);
- reg_copy(st1_ptr, st_new_ptr);
- setexponent16(st_new_ptr, exponent(st_new_ptr));
-
- denormal_arg:
-
- e = exponent16(st_new_ptr);
- convert_l2reg(&e, 1);
- setexponentpos(st_new_ptr, 0);
- setsign(st_new_ptr, sign);
- FPU_settag0(TAG_Valid); /* Needed if arg was a denormal */
- return;
- } else if (st0_tag == TAG_Zero) {
- sign = getsign(st0_ptr);
-
- if (FPU_divide_by_zero(0, SIGN_NEG) < 0)
- return;
-
- push();
- FPU_copy_to_reg0(&CONST_Z, TAG_Zero);
- setsign(st_new_ptr, sign);
- return;
- }
-
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
-
- if (st0_tag == TW_Denormal) {
- if (denormal_operand() < 0)
- return;
-
- push();
- sign = getsign(st1_ptr);
- FPU_to_exp16(st1_ptr, st_new_ptr);
- goto denormal_arg;
- } else if (st0_tag == TW_Infinity) {
- sign = getsign(st0_ptr);
- setpositive(st0_ptr);
- push();
- FPU_copy_to_reg0(&CONST_INF, TAG_Special);
- setsign(st_new_ptr, sign);
- return;
- } else if (st0_tag == TW_NaN) {
- if (real_1op_NaN(st0_ptr) < 0)
- return;
-
- push();
- FPU_copy_to_reg0(st0_ptr, TAG_Special);
- return;
- } else if (st0_tag == TAG_Empty) {
- /* Is this the correct behaviour? */
- if (control_word & EX_Invalid) {
- FPU_stack_underflow();
- push();
- FPU_stack_underflow();
- } else
- EXCEPTION(EX_StackUnder);
- }
-#ifdef PARANOID
- else
- EXCEPTION(EX_INTERNAL | 0x119);
-#endif /* PARANOID */
-}
-
-static void fdecstp(FPU_REG *st0_ptr, u_char st0_tag)
-{
- clear_C1();
- top--;
-}
-
-static void fincstp(FPU_REG *st0_ptr, u_char st0_tag)
-{
- clear_C1();
- top++;
-}
-
-static void fsqrt_(FPU_REG *st0_ptr, u_char st0_tag)
-{
- int expon;
-
- clear_C1();
-
- if (st0_tag == TAG_Valid) {
- u_char tag;
-
- if (signnegative(st0_ptr)) {
- arith_invalid(0); /* sqrt(negative) is invalid */
- return;
- }
-
- /* make st(0) in [1.0 .. 4.0) */
- expon = exponent(st0_ptr);
-
- denormal_arg:
-
- setexponent16(st0_ptr, (expon & 1));
-
- /* Do the computation, the sign of the result will be positive. */
- tag = wm_sqrt(st0_ptr, 0, 0, control_word, SIGN_POS);
- addexponent(st0_ptr, expon >> 1);
- FPU_settag0(tag);
- return;
- }
-
- if (st0_tag == TAG_Zero)
- return;
-
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
-
- if (st0_tag == TW_Infinity) {
- if (signnegative(st0_ptr))
- arith_invalid(0); /* sqrt(-Infinity) is invalid */
- return;
- } else if (st0_tag == TW_Denormal) {
- if (signnegative(st0_ptr)) {
- arith_invalid(0); /* sqrt(negative) is invalid */
- return;
- }
-
- if (denormal_operand() < 0)
- return;
-
- FPU_to_exp16(st0_ptr, st0_ptr);
-
- expon = exponent16(st0_ptr);
-
- goto denormal_arg;
- }
-
- single_arg_error(st0_ptr, st0_tag);
-
-}
-
-static void frndint_(FPU_REG *st0_ptr, u_char st0_tag)
-{
- int flags, tag;
-
- if (st0_tag == TAG_Valid) {
- u_char sign;
-
- denormal_arg:
-
- sign = getsign(st0_ptr);
-
- if (exponent(st0_ptr) > 63)
- return;
-
- if (st0_tag == TW_Denormal) {
- if (denormal_operand() < 0)
- return;
- }
-
- /* Fortunately, this can't overflow to 2^64 */
- if ((flags = FPU_round_to_int(st0_ptr, st0_tag)))
- set_precision_flag(flags);
-
- setexponent16(st0_ptr, 63);
- tag = FPU_normalize(st0_ptr);
- setsign(st0_ptr, sign);
- FPU_settag0(tag);
- return;
- }
-
- if (st0_tag == TAG_Zero)
- return;
-
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
-
- if (st0_tag == TW_Denormal)
- goto denormal_arg;
- else if (st0_tag == TW_Infinity)
- return;
- else
- single_arg_error(st0_ptr, st0_tag);
-}
-
-static int f_sin(FPU_REG *st0_ptr, u_char tag)
-{
- u_char arg_sign = getsign(st0_ptr);
-
- if (tag == TAG_Valid) {
- int q;
-
- if (exponent(st0_ptr) > -40) {
- if ((q = trig_arg(st0_ptr, 0)) == -1) {
- /* Operand is out of range */
- return 1;
- }
-
- poly_sine(st0_ptr);
-
- if (q & 2)
- changesign(st0_ptr);
-
- setsign(st0_ptr, getsign(st0_ptr) ^ arg_sign);
-
- /* We do not really know if up or down */
- set_precision_flag_up();
- return 0;
- } else {
- /* For a small arg, the result == the argument */
- set_precision_flag_up(); /* Must be up. */
- return 0;
- }
- }
-
- if (tag == TAG_Zero) {
- setcc(0);
- return 0;
- }
-
- if (tag == TAG_Special)
- tag = FPU_Special(st0_ptr);
-
- if (tag == TW_Denormal) {
- if (denormal_operand() < 0)
- return 1;
-
- /* For a small arg, the result == the argument */
- /* Underflow may happen */
- FPU_to_exp16(st0_ptr, st0_ptr);
-
- tag = FPU_round(st0_ptr, 1, 0, FULL_PRECISION, arg_sign);
-
- FPU_settag0(tag);
-
- return 0;
- } else if (tag == TW_Infinity) {
- /* The 80486 treats infinity as an invalid operand */
- arith_invalid(0);
- return 1;
- } else {
- single_arg_error(st0_ptr, tag);
- return 1;
- }
-}
-
-static void fsin(FPU_REG *st0_ptr, u_char tag)
-{
- f_sin(st0_ptr, tag);
-}
-
-static int f_cos(FPU_REG *st0_ptr, u_char tag)
-{
- u_char st0_sign;
-
- st0_sign = getsign(st0_ptr);
-
- if (tag == TAG_Valid) {
- int q;
-
- if (exponent(st0_ptr) > -40) {
- if ((exponent(st0_ptr) < 0)
- || ((exponent(st0_ptr) == 0)
- && (significand(st0_ptr) <=
- 0xc90fdaa22168c234LL))) {
- poly_cos(st0_ptr);
-
- /* We do not really know if up or down */
- set_precision_flag_down();
-
- return 0;
- } else if ((q = trig_arg(st0_ptr, FCOS)) != -1) {
- poly_sine(st0_ptr);
-
- if ((q + 1) & 2)
- changesign(st0_ptr);
-
- /* We do not really know if up or down */
- set_precision_flag_down();
-
- return 0;
- } else {
- /* Operand is out of range */
- return 1;
- }
- } else {
- denormal_arg:
-
- setcc(0);
- FPU_copy_to_reg0(&CONST_1, TAG_Valid);
-#ifdef PECULIAR_486
- set_precision_flag_down(); /* 80486 appears to do this. */
-#else
- set_precision_flag_up(); /* Must be up. */
-#endif /* PECULIAR_486 */
- return 0;
- }
- } else if (tag == TAG_Zero) {
- FPU_copy_to_reg0(&CONST_1, TAG_Valid);
- setcc(0);
- return 0;
- }
-
- if (tag == TAG_Special)
- tag = FPU_Special(st0_ptr);
-
- if (tag == TW_Denormal) {
- if (denormal_operand() < 0)
- return 1;
-
- goto denormal_arg;
- } else if (tag == TW_Infinity) {
- /* The 80486 treats infinity as an invalid operand */
- arith_invalid(0);
- return 1;
- } else {
- single_arg_error(st0_ptr, tag); /* requires st0_ptr == &st(0) */
- return 1;
- }
-}
-
-static void fcos(FPU_REG *st0_ptr, u_char st0_tag)
-{
- f_cos(st0_ptr, st0_tag);
-}
-
-static void fsincos(FPU_REG *st0_ptr, u_char st0_tag)
-{
- FPU_REG *st_new_ptr;
- FPU_REG arg;
- u_char tag;
-
- /* Stack underflow has higher priority */
- if (st0_tag == TAG_Empty) {
- FPU_stack_underflow(); /* Puts a QNaN in st(0) */
- if (control_word & CW_Invalid) {
- st_new_ptr = &st(-1);
- push();
- FPU_stack_underflow(); /* Puts a QNaN in the new st(0) */
- }
- return;
- }
-
- if (STACK_OVERFLOW) {
- FPU_stack_overflow();
- return;
- }
-
- if (st0_tag == TAG_Special)
- tag = FPU_Special(st0_ptr);
- else
- tag = st0_tag;
-
- if (tag == TW_NaN) {
- single_arg_2_error(st0_ptr, TW_NaN);
- return;
- } else if (tag == TW_Infinity) {
- /* The 80486 treats infinity as an invalid operand */
- if (arith_invalid(0) >= 0) {
- /* Masked response */
- push();
- arith_invalid(0);
- }
- return;
- }
-
- reg_copy(st0_ptr, &arg);
- if (!f_sin(st0_ptr, st0_tag)) {
- push();
- FPU_copy_to_reg0(&arg, st0_tag);
- f_cos(&st(0), st0_tag);
- } else {
- /* An error, so restore st(0) */
- FPU_copy_to_reg0(&arg, st0_tag);
- }
-}
-
-/*---------------------------------------------------------------------------*/
-/* The following all require two arguments: st(0) and st(1) */
-
-/* A lean, mean kernel for the fprem instructions. This relies upon
- the division and rounding to an integer in do_fprem giving an
- exact result. Because of this, rem_kernel() needs to deal only with
- the least significant 64 bits, the more significant bits of the
- result must be zero.
- */
-static void rem_kernel(unsigned long long st0, unsigned long long *y,
- unsigned long long st1, unsigned long long q, int n)
-{
- int dummy;
- unsigned long long x;
-
- x = st0 << n;
-
- /* Do the required multiplication and subtraction in the one operation */
-
- /* lsw x -= lsw st1 * lsw q */
- asm volatile ("mull %4; subl %%eax,%0; sbbl %%edx,%1":"=m"
- (((unsigned *)&x)[0]), "=m"(((unsigned *)&x)[1]),
- "=a"(dummy)
- :"2"(((unsigned *)&st1)[0]), "m"(((unsigned *)&q)[0])
- :"%dx");
- /* msw x -= msw st1 * lsw q */
- asm volatile ("mull %3; subl %%eax,%0":"=m" (((unsigned *)&x)[1]),
- "=a"(dummy)
- :"1"(((unsigned *)&st1)[1]), "m"(((unsigned *)&q)[0])
- :"%dx");
- /* msw x -= lsw st1 * msw q */
- asm volatile ("mull %3; subl %%eax,%0":"=m" (((unsigned *)&x)[1]),
- "=a"(dummy)
- :"1"(((unsigned *)&st1)[0]), "m"(((unsigned *)&q)[1])
- :"%dx");
-
- *y = x;
-}
-
-/* Remainder of st(0) / st(1) */
-/* This routine produces exact results, i.e. there is never any
- rounding or truncation, etc of the result. */
-static void do_fprem(FPU_REG *st0_ptr, u_char st0_tag, int round)
-{
- FPU_REG *st1_ptr = &st(1);
- u_char st1_tag = FPU_gettagi(1);
-
- if (!((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid))) {
- FPU_REG tmp, st0, st1;
- u_char st0_sign, st1_sign;
- u_char tmptag;
- int tag;
- int old_cw;
- int expdif;
- long long q;
- unsigned short saved_status;
- int cc;
-
- fprem_valid:
- /* Convert registers for internal use. */
- st0_sign = FPU_to_exp16(st0_ptr, &st0);
- st1_sign = FPU_to_exp16(st1_ptr, &st1);
- expdif = exponent16(&st0) - exponent16(&st1);
-
- old_cw = control_word;
- cc = 0;
-
- /* We want the status following the denorm tests, but don't want
- the status changed by the arithmetic operations. */
- saved_status = partial_status;
- control_word &= ~CW_RC;
- control_word |= RC_CHOP;
-
- if (expdif < 64) {
- /* This should be the most common case */
-
- if (expdif > -2) {
- u_char sign = st0_sign ^ st1_sign;
- tag = FPU_u_div(&st0, &st1, &tmp,
- PR_64_BITS | RC_CHOP | 0x3f,
- sign);
- setsign(&tmp, sign);
-
- if (exponent(&tmp) >= 0) {
- FPU_round_to_int(&tmp, tag); /* Fortunately, this can't
- overflow to 2^64 */
- q = significand(&tmp);
-
- rem_kernel(significand(&st0),
- &significand(&tmp),
- significand(&st1),
- q, expdif);
-
- setexponent16(&tmp, exponent16(&st1));
- } else {
- reg_copy(&st0, &tmp);
- q = 0;
- }
-
- if ((round == RC_RND)
- && (tmp.sigh & 0xc0000000)) {
- /* We may need to subtract st(1) once more,
- to get a result <= 1/2 of st(1). */
- unsigned long long x;
- expdif =
- exponent16(&st1) - exponent16(&tmp);
- if (expdif <= 1) {
- if (expdif == 0)
- x = significand(&st1) -
- significand(&tmp);
- else /* expdif is 1 */
- x = (significand(&st1)
- << 1) -
- significand(&tmp);
- if ((x < significand(&tmp)) ||
- /* or equi-distant (from 0 & st(1)) and q is odd */
- ((x == significand(&tmp))
- && (q & 1))) {
- st0_sign = !st0_sign;
- significand(&tmp) = x;
- q++;
- }
- }
- }
-
- if (q & 4)
- cc |= SW_C0;
- if (q & 2)
- cc |= SW_C3;
- if (q & 1)
- cc |= SW_C1;
- } else {
- control_word = old_cw;
- setcc(0);
- return;
- }
- } else {
- /* There is a large exponent difference ( >= 64 ) */
- /* To make much sense, the code in this section should
- be done at high precision. */
- int exp_1, N;
- u_char sign;
-
- /* prevent overflow here */
- /* N is 'a number between 32 and 63' (p26-113) */
- reg_copy(&st0, &tmp);
- tmptag = st0_tag;
- N = (expdif & 0x0000001f) + 32; /* This choice gives results
- identical to an AMD 486 */
- setexponent16(&tmp, N);
- exp_1 = exponent16(&st1);
- setexponent16(&st1, 0);
- expdif -= N;
-
- sign = getsign(&tmp) ^ st1_sign;
- tag =
- FPU_u_div(&tmp, &st1, &tmp,
- PR_64_BITS | RC_CHOP | 0x3f, sign);
- setsign(&tmp, sign);
-
- FPU_round_to_int(&tmp, tag); /* Fortunately, this can't
- overflow to 2^64 */
-
- rem_kernel(significand(&st0),
- &significand(&tmp),
- significand(&st1),
- significand(&tmp), exponent(&tmp)
- );
- setexponent16(&tmp, exp_1 + expdif);
-
- /* It is possible for the operation to be complete here.
- What does the IEEE standard say? The Intel 80486 manual
- implies that the operation will never be completed at this
- point, and the behaviour of a real 80486 confirms this.
- */
- if (!(tmp.sigh | tmp.sigl)) {
- /* The result is zero */
- control_word = old_cw;
- partial_status = saved_status;
- FPU_copy_to_reg0(&CONST_Z, TAG_Zero);
- setsign(&st0, st0_sign);
-#ifdef PECULIAR_486
- setcc(SW_C2);
-#else
- setcc(0);
-#endif /* PECULIAR_486 */
- return;
- }
- cc = SW_C2;
- }
-
- control_word = old_cw;
- partial_status = saved_status;
- tag = FPU_normalize_nuo(&tmp);
- reg_copy(&tmp, st0_ptr);
-
- /* The only condition to be looked for is underflow,
- and it can occur here only if underflow is unmasked. */
- if ((exponent16(&tmp) <= EXP_UNDER) && (tag != TAG_Zero)
- && !(control_word & CW_Underflow)) {
- setcc(cc);
- tag = arith_underflow(st0_ptr);
- setsign(st0_ptr, st0_sign);
- FPU_settag0(tag);
- return;
- } else if ((exponent16(&tmp) > EXP_UNDER) || (tag == TAG_Zero)) {
- stdexp(st0_ptr);
- setsign(st0_ptr, st0_sign);
- } else {
- tag =
- FPU_round(st0_ptr, 0, 0, FULL_PRECISION, st0_sign);
- }
- FPU_settag0(tag);
- setcc(cc);
-
- return;
- }
-
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
- if (st1_tag == TAG_Special)
- st1_tag = FPU_Special(st1_ptr);
-
- if (((st0_tag == TAG_Valid) && (st1_tag == TW_Denormal))
- || ((st0_tag == TW_Denormal) && (st1_tag == TAG_Valid))
- || ((st0_tag == TW_Denormal) && (st1_tag == TW_Denormal))) {
- if (denormal_operand() < 0)
- return;
- goto fprem_valid;
- } else if ((st0_tag == TAG_Empty) || (st1_tag == TAG_Empty)) {
- FPU_stack_underflow();
- return;
- } else if (st0_tag == TAG_Zero) {
- if (st1_tag == TAG_Valid) {
- setcc(0);
- return;
- } else if (st1_tag == TW_Denormal) {
- if (denormal_operand() < 0)
- return;
- setcc(0);
- return;
- } else if (st1_tag == TAG_Zero) {
- arith_invalid(0);
- return;
- } /* fprem(?,0) always invalid */
- else if (st1_tag == TW_Infinity) {
- setcc(0);
- return;
- }
- } else if ((st0_tag == TAG_Valid) || (st0_tag == TW_Denormal)) {
- if (st1_tag == TAG_Zero) {
- arith_invalid(0); /* fprem(Valid,Zero) is invalid */
- return;
- } else if (st1_tag != TW_NaN) {
- if (((st0_tag == TW_Denormal)
- || (st1_tag == TW_Denormal))
- && (denormal_operand() < 0))
- return;
-
- if (st1_tag == TW_Infinity) {
- /* fprem(Valid,Infinity) is o.k. */
- setcc(0);
- return;
- }
- }
- } else if (st0_tag == TW_Infinity) {
- if (st1_tag != TW_NaN) {
- arith_invalid(0); /* fprem(Infinity,?) is invalid */
- return;
- }
- }
-
- /* One of the registers must contain a NaN if we got here. */
-
-#ifdef PARANOID
- if ((st0_tag != TW_NaN) && (st1_tag != TW_NaN))
- EXCEPTION(EX_INTERNAL | 0x118);
-#endif /* PARANOID */
-
- real_2op_NaN(st1_ptr, st1_tag, 0, st1_ptr);
-
-}
-
-/* ST(1) <- ST(1) * log ST; pop ST */
-static void fyl2x(FPU_REG *st0_ptr, u_char st0_tag)
-{
- FPU_REG *st1_ptr = &st(1), exponent;
- u_char st1_tag = FPU_gettagi(1);
- u_char sign;
- int e, tag;
-
- clear_C1();
-
- if ((st0_tag == TAG_Valid) && (st1_tag == TAG_Valid)) {
- both_valid:
- /* Both regs are Valid or Denormal */
- if (signpositive(st0_ptr)) {
- if (st0_tag == TW_Denormal)
- FPU_to_exp16(st0_ptr, st0_ptr);
- else
- /* Convert st(0) for internal use. */
- setexponent16(st0_ptr, exponent(st0_ptr));
-
- if ((st0_ptr->sigh == 0x80000000)
- && (st0_ptr->sigl == 0)) {
- /* Special case. The result can be precise. */
- u_char esign;
- e = exponent16(st0_ptr);
- if (e >= 0) {
- exponent.sigh = e;
- esign = SIGN_POS;
- } else {
- exponent.sigh = -e;
- esign = SIGN_NEG;
- }
- exponent.sigl = 0;
- setexponent16(&exponent, 31);
- tag = FPU_normalize_nuo(&exponent);
- stdexp(&exponent);
- setsign(&exponent, esign);
- tag =
- FPU_mul(&exponent, tag, 1, FULL_PRECISION);
- if (tag >= 0)
- FPU_settagi(1, tag);
- } else {
- /* The usual case */
- sign = getsign(st1_ptr);
- if (st1_tag == TW_Denormal)
- FPU_to_exp16(st1_ptr, st1_ptr);
- else
- /* Convert st(1) for internal use. */
- setexponent16(st1_ptr,
- exponent(st1_ptr));
- poly_l2(st0_ptr, st1_ptr, sign);
- }
- } else {
- /* negative */
- if (arith_invalid(1) < 0)
- return;
- }
-
- FPU_pop();
-
- return;
- }
-
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
- if (st1_tag == TAG_Special)
- st1_tag = FPU_Special(st1_ptr);
-
- if ((st0_tag == TAG_Empty) || (st1_tag == TAG_Empty)) {
- FPU_stack_underflow_pop(1);
- return;
- } else if ((st0_tag <= TW_Denormal) && (st1_tag <= TW_Denormal)) {
- if (st0_tag == TAG_Zero) {
- if (st1_tag == TAG_Zero) {
- /* Both args zero is invalid */
- if (arith_invalid(1) < 0)
- return;
- } else {
- u_char sign;
- sign = getsign(st1_ptr) ^ SIGN_NEG;
- if (FPU_divide_by_zero(1, sign) < 0)
- return;
-
- setsign(st1_ptr, sign);
- }
- } else if (st1_tag == TAG_Zero) {
- /* st(1) contains zero, st(0) valid <> 0 */
- /* Zero is the valid answer */
- sign = getsign(st1_ptr);
-
- if (signnegative(st0_ptr)) {
- /* log(negative) */
- if (arith_invalid(1) < 0)
- return;
- } else if ((st0_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
- else {
- if (exponent(st0_ptr) < 0)
- sign ^= SIGN_NEG;
-
- FPU_copy_to_reg1(&CONST_Z, TAG_Zero);
- setsign(st1_ptr, sign);
- }
- } else {
- /* One or both operands are denormals. */
- if (denormal_operand() < 0)
- return;
- goto both_valid;
- }
- } else if ((st0_tag == TW_NaN) || (st1_tag == TW_NaN)) {
- if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0)
- return;
- }
- /* One or both arg must be an infinity */
- else if (st0_tag == TW_Infinity) {
- if ((signnegative(st0_ptr)) || (st1_tag == TAG_Zero)) {
- /* log(-infinity) or 0*log(infinity) */
- if (arith_invalid(1) < 0)
- return;
- } else {
- u_char sign = getsign(st1_ptr);
-
- if ((st1_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
-
- FPU_copy_to_reg1(&CONST_INF, TAG_Special);
- setsign(st1_ptr, sign);
- }
- }
- /* st(1) must be infinity here */
- else if (((st0_tag == TAG_Valid) || (st0_tag == TW_Denormal))
- && (signpositive(st0_ptr))) {
- if (exponent(st0_ptr) >= 0) {
- if ((exponent(st0_ptr) == 0) &&
- (st0_ptr->sigh == 0x80000000) &&
- (st0_ptr->sigl == 0)) {
- /* st(0) holds 1.0 */
- /* infinity*log(1) */
- if (arith_invalid(1) < 0)
- return;
- }
- /* else st(0) is positive and > 1.0 */
- } else {
- /* st(0) is positive and < 1.0 */
-
- if ((st0_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
-
- changesign(st1_ptr);
- }
- } else {
- /* st(0) must be zero or negative */
- if (st0_tag == TAG_Zero) {
- /* This should be invalid, but a real 80486 is happy with it. */
-
-#ifndef PECULIAR_486
- sign = getsign(st1_ptr);
- if (FPU_divide_by_zero(1, sign) < 0)
- return;
-#endif /* PECULIAR_486 */
-
- changesign(st1_ptr);
- } else if (arith_invalid(1) < 0) /* log(negative) */
- return;
- }
-
- FPU_pop();
-}
-
-static void fpatan(FPU_REG *st0_ptr, u_char st0_tag)
-{
- FPU_REG *st1_ptr = &st(1);
- u_char st1_tag = FPU_gettagi(1);
- int tag;
-
- clear_C1();
- if (!((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid))) {
- valid_atan:
-
- poly_atan(st0_ptr, st0_tag, st1_ptr, st1_tag);
-
- FPU_pop();
-
- return;
- }
-
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
- if (st1_tag == TAG_Special)
- st1_tag = FPU_Special(st1_ptr);
-
- if (((st0_tag == TAG_Valid) && (st1_tag == TW_Denormal))
- || ((st0_tag == TW_Denormal) && (st1_tag == TAG_Valid))
- || ((st0_tag == TW_Denormal) && (st1_tag == TW_Denormal))) {
- if (denormal_operand() < 0)
- return;
-
- goto valid_atan;
- } else if ((st0_tag == TAG_Empty) || (st1_tag == TAG_Empty)) {
- FPU_stack_underflow_pop(1);
- return;
- } else if ((st0_tag == TW_NaN) || (st1_tag == TW_NaN)) {
- if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) >= 0)
- FPU_pop();
- return;
- } else if ((st0_tag == TW_Infinity) || (st1_tag == TW_Infinity)) {
- u_char sign = getsign(st1_ptr);
- if (st0_tag == TW_Infinity) {
- if (st1_tag == TW_Infinity) {
- if (signpositive(st0_ptr)) {
- FPU_copy_to_reg1(&CONST_PI4, TAG_Valid);
- } else {
- setpositive(st1_ptr);
- tag =
- FPU_u_add(&CONST_PI4, &CONST_PI2,
- st1_ptr, FULL_PRECISION,
- SIGN_POS,
- exponent(&CONST_PI4),
- exponent(&CONST_PI2));
- if (tag >= 0)
- FPU_settagi(1, tag);
- }
- } else {
- if ((st1_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
-
- if (signpositive(st0_ptr)) {
- FPU_copy_to_reg1(&CONST_Z, TAG_Zero);
- setsign(st1_ptr, sign); /* An 80486 preserves the sign */
- FPU_pop();
- return;
- } else {
- FPU_copy_to_reg1(&CONST_PI, TAG_Valid);
- }
- }
- } else {
- /* st(1) is infinity, st(0) not infinity */
- if ((st0_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
-
- FPU_copy_to_reg1(&CONST_PI2, TAG_Valid);
- }
- setsign(st1_ptr, sign);
- } else if (st1_tag == TAG_Zero) {
- /* st(0) must be valid or zero */
- u_char sign = getsign(st1_ptr);
-
- if ((st0_tag == TW_Denormal) && (denormal_operand() < 0))
- return;
-
- if (signpositive(st0_ptr)) {
- /* An 80486 preserves the sign */
- FPU_pop();
- return;
- }
-
- FPU_copy_to_reg1(&CONST_PI, TAG_Valid);
- setsign(st1_ptr, sign);
- } else if (st0_tag == TAG_Zero) {
- /* st(1) must be TAG_Valid here */
- u_char sign = getsign(st1_ptr);
-
- if ((st1_tag == TW_Denormal) && (denormal_operand() < 0))
- return;
-
- FPU_copy_to_reg1(&CONST_PI2, TAG_Valid);
- setsign(st1_ptr, sign);
- }
-#ifdef PARANOID
- else
- EXCEPTION(EX_INTERNAL | 0x125);
-#endif /* PARANOID */
-
- FPU_pop();
- set_precision_flag_up(); /* We do not really know if up or down */
-}
-
-static void fprem(FPU_REG *st0_ptr, u_char st0_tag)
-{
- do_fprem(st0_ptr, st0_tag, RC_CHOP);
-}
-
-static void fprem1(FPU_REG *st0_ptr, u_char st0_tag)
-{
- do_fprem(st0_ptr, st0_tag, RC_RND);
-}
-
-static void fyl2xp1(FPU_REG *st0_ptr, u_char st0_tag)
-{
- u_char sign, sign1;
- FPU_REG *st1_ptr = &st(1), a, b;
- u_char st1_tag = FPU_gettagi(1);
-
- clear_C1();
- if (!((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid))) {
- valid_yl2xp1:
-
- sign = getsign(st0_ptr);
- sign1 = getsign(st1_ptr);
-
- FPU_to_exp16(st0_ptr, &a);
- FPU_to_exp16(st1_ptr, &b);
-
- if (poly_l2p1(sign, sign1, &a, &b, st1_ptr))
- return;
-
- FPU_pop();
- return;
- }
-
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
- if (st1_tag == TAG_Special)
- st1_tag = FPU_Special(st1_ptr);
-
- if (((st0_tag == TAG_Valid) && (st1_tag == TW_Denormal))
- || ((st0_tag == TW_Denormal) && (st1_tag == TAG_Valid))
- || ((st0_tag == TW_Denormal) && (st1_tag == TW_Denormal))) {
- if (denormal_operand() < 0)
- return;
-
- goto valid_yl2xp1;
- } else if ((st0_tag == TAG_Empty) | (st1_tag == TAG_Empty)) {
- FPU_stack_underflow_pop(1);
- return;
- } else if (st0_tag == TAG_Zero) {
- switch (st1_tag) {
- case TW_Denormal:
- if (denormal_operand() < 0)
- return;
- fallthrough;
- case TAG_Zero:
- case TAG_Valid:
- setsign(st0_ptr, getsign(st0_ptr) ^ getsign(st1_ptr));
- FPU_copy_to_reg1(st0_ptr, st0_tag);
- break;
-
- case TW_Infinity:
- /* Infinity*log(1) */
- if (arith_invalid(1) < 0)
- return;
- break;
-
- case TW_NaN:
- if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0)
- return;
- break;
-
- default:
-#ifdef PARANOID
- EXCEPTION(EX_INTERNAL | 0x116);
- return;
-#endif /* PARANOID */
- break;
- }
- } else if ((st0_tag == TAG_Valid) || (st0_tag == TW_Denormal)) {
- switch (st1_tag) {
- case TAG_Zero:
- if (signnegative(st0_ptr)) {
- if (exponent(st0_ptr) >= 0) {
- /* st(0) holds <= -1.0 */
-#ifdef PECULIAR_486 /* Stupid 80486 doesn't worry about log(negative). */
- changesign(st1_ptr);
-#else
- if (arith_invalid(1) < 0)
- return;
-#endif /* PECULIAR_486 */
- } else if ((st0_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
- else
- changesign(st1_ptr);
- } else if ((st0_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
- break;
-
- case TW_Infinity:
- if (signnegative(st0_ptr)) {
- if ((exponent(st0_ptr) >= 0) &&
- !((st0_ptr->sigh == 0x80000000) &&
- (st0_ptr->sigl == 0))) {
- /* st(0) holds < -1.0 */
-#ifdef PECULIAR_486 /* Stupid 80486 doesn't worry about log(negative). */
- changesign(st1_ptr);
-#else
- if (arith_invalid(1) < 0)
- return;
-#endif /* PECULIAR_486 */
- } else if ((st0_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
- else
- changesign(st1_ptr);
- } else if ((st0_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
- break;
-
- case TW_NaN:
- if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0)
- return;
- }
-
- } else if (st0_tag == TW_NaN) {
- if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0)
- return;
- } else if (st0_tag == TW_Infinity) {
- if (st1_tag == TW_NaN) {
- if (real_2op_NaN(st0_ptr, st0_tag, 1, st0_ptr) < 0)
- return;
- } else if (signnegative(st0_ptr)) {
-#ifndef PECULIAR_486
- /* This should have higher priority than denormals, but... */
- if (arith_invalid(1) < 0) /* log(-infinity) */
- return;
-#endif /* PECULIAR_486 */
- if ((st1_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
-#ifdef PECULIAR_486
- /* Denormal operands actually get higher priority */
- if (arith_invalid(1) < 0) /* log(-infinity) */
- return;
-#endif /* PECULIAR_486 */
- } else if (st1_tag == TAG_Zero) {
- /* log(infinity) */
- if (arith_invalid(1) < 0)
- return;
- }
-
- /* st(1) must be valid here. */
-
- else if ((st1_tag == TW_Denormal) && (denormal_operand() < 0))
- return;
-
- /* The Manual says that log(Infinity) is invalid, but a real
- 80486 sensibly says that it is o.k. */
- else {
- u_char sign = getsign(st1_ptr);
- FPU_copy_to_reg1(&CONST_INF, TAG_Special);
- setsign(st1_ptr, sign);
- }
- }
-#ifdef PARANOID
- else {
- EXCEPTION(EX_INTERNAL | 0x117);
- return;
- }
-#endif /* PARANOID */
-
- FPU_pop();
- return;
-
-}
-
-static void fscale(FPU_REG *st0_ptr, u_char st0_tag)
-{
- FPU_REG *st1_ptr = &st(1);
- u_char st1_tag = FPU_gettagi(1);
- int old_cw = control_word;
- u_char sign = getsign(st0_ptr);
-
- clear_C1();
- if (!((st0_tag ^ TAG_Valid) | (st1_tag ^ TAG_Valid))) {
- long scale;
- FPU_REG tmp;
-
- /* Convert register for internal use. */
- setexponent16(st0_ptr, exponent(st0_ptr));
-
- valid_scale:
-
- if (exponent(st1_ptr) > 30) {
- /* 2^31 is far too large, would require 2^(2^30) or 2^(-2^30) */
-
- if (signpositive(st1_ptr)) {
- EXCEPTION(EX_Overflow);
- FPU_copy_to_reg0(&CONST_INF, TAG_Special);
- } else {
- EXCEPTION(EX_Underflow);
- FPU_copy_to_reg0(&CONST_Z, TAG_Zero);
- }
- setsign(st0_ptr, sign);
- return;
- }
-
- control_word &= ~CW_RC;
- control_word |= RC_CHOP;
- reg_copy(st1_ptr, &tmp);
- FPU_round_to_int(&tmp, st1_tag); /* This can never overflow here */
- control_word = old_cw;
- scale = signnegative(st1_ptr) ? -tmp.sigl : tmp.sigl;
- scale += exponent16(st0_ptr);
-
- setexponent16(st0_ptr, scale);
-
- /* Use FPU_round() to properly detect under/overflow etc */
- FPU_round(st0_ptr, 0, 0, control_word, sign);
-
- return;
- }
-
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
- if (st1_tag == TAG_Special)
- st1_tag = FPU_Special(st1_ptr);
-
- if ((st0_tag == TAG_Valid) || (st0_tag == TW_Denormal)) {
- switch (st1_tag) {
- case TAG_Valid:
- /* st(0) must be a denormal */
- if ((st0_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
-
- FPU_to_exp16(st0_ptr, st0_ptr); /* Will not be left on stack */
- goto valid_scale;
-
- case TAG_Zero:
- if (st0_tag == TW_Denormal)
- denormal_operand();
- return;
-
- case TW_Denormal:
- denormal_operand();
- return;
-
- case TW_Infinity:
- if ((st0_tag == TW_Denormal)
- && (denormal_operand() < 0))
- return;
-
- if (signpositive(st1_ptr))
- FPU_copy_to_reg0(&CONST_INF, TAG_Special);
- else
- FPU_copy_to_reg0(&CONST_Z, TAG_Zero);
- setsign(st0_ptr, sign);
- return;
-
- case TW_NaN:
- real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr);
- return;
- }
- } else if (st0_tag == TAG_Zero) {
- switch (st1_tag) {
- case TAG_Valid:
- case TAG_Zero:
- return;
-
- case TW_Denormal:
- denormal_operand();
- return;
-
- case TW_Infinity:
- if (signpositive(st1_ptr))
- arith_invalid(0); /* Zero scaled by +Infinity */
- return;
-
- case TW_NaN:
- real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr);
- return;
- }
- } else if (st0_tag == TW_Infinity) {
- switch (st1_tag) {
- case TAG_Valid:
- case TAG_Zero:
- return;
-
- case TW_Denormal:
- denormal_operand();
- return;
-
- case TW_Infinity:
- if (signnegative(st1_ptr))
- arith_invalid(0); /* Infinity scaled by -Infinity */
- return;
-
- case TW_NaN:
- real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr);
- return;
- }
- } else if (st0_tag == TW_NaN) {
- if (st1_tag != TAG_Empty) {
- real_2op_NaN(st1_ptr, st1_tag, 0, st0_ptr);
- return;
- }
- }
-#ifdef PARANOID
- if (!((st0_tag == TAG_Empty) || (st1_tag == TAG_Empty))) {
- EXCEPTION(EX_INTERNAL | 0x115);
- return;
- }
-#endif
-
- /* At least one of st(0), st(1) must be empty */
- FPU_stack_underflow();
-
-}
-
-/*---------------------------------------------------------------------------*/
-
-static FUNC_ST0 const trig_table_a[] = {
- f2xm1, fyl2x, fptan, fpatan,
- fxtract, fprem1, fdecstp, fincstp,
-};
-
-void FPU_triga(void)
-{
- (trig_table_a[FPU_rm]) (&st(0), FPU_gettag0());
-}
-
-static FUNC_ST0 const trig_table_b[] = {
- fprem, fyl2xp1, fsqrt_, fsincos, frndint_, fscale, fsin, fcos
-};
-
-void FPU_trigb(void)
-{
- (trig_table_b[FPU_rm]) (&st(0), FPU_gettag0());
-}
diff --git a/arch/x86/math-emu/get_address.c b/arch/x86/math-emu/get_address.c
deleted file mode 100644
index 4a9fd9029a53..000000000000
--- a/arch/x86/math-emu/get_address.c
+++ /dev/null
@@ -1,401 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | get_address.c |
- | |
- | Get the effective address from an FPU instruction. |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | Note: |
- | The file contains code which accesses user memory. |
- | Emulator static data may change when user memory is accessed, due to |
- | other processes using the emulator while swapping is in progress. |
- +---------------------------------------------------------------------------*/
-
-#include <linux/stddef.h>
-
-#include <linux/uaccess.h>
-#include <asm/vm86.h>
-
-#include "fpu_system.h"
-#include "exception.h"
-#include "fpu_emu.h"
-
-#define FPU_WRITE_BIT 0x10
-
-static int reg_offset[] = {
- offsetof(struct pt_regs, ax),
- offsetof(struct pt_regs, cx),
- offsetof(struct pt_regs, dx),
- offsetof(struct pt_regs, bx),
- offsetof(struct pt_regs, sp),
- offsetof(struct pt_regs, bp),
- offsetof(struct pt_regs, si),
- offsetof(struct pt_regs, di)
-};
-
-#define REG_(x) (*(long *)(reg_offset[(x)] + (u_char *)FPU_info->regs))
-
-static int reg_offset_vm86[] = {
- offsetof(struct pt_regs, cs),
- offsetof(struct kernel_vm86_regs, ds),
- offsetof(struct kernel_vm86_regs, es),
- offsetof(struct kernel_vm86_regs, fs),
- offsetof(struct kernel_vm86_regs, gs),
- offsetof(struct pt_regs, ss),
- offsetof(struct kernel_vm86_regs, ds)
-};
-
-#define VM86_REG_(x) (*(unsigned short *) \
- (reg_offset_vm86[((unsigned)x)] + (u_char *)FPU_info->regs))
-
-static int reg_offset_pm[] = {
- offsetof(struct pt_regs, cs),
- offsetof(struct pt_regs, ds),
- offsetof(struct pt_regs, es),
- offsetof(struct pt_regs, fs),
- offsetof(struct pt_regs, ds), /* dummy, not saved on stack */
- offsetof(struct pt_regs, ss),
- offsetof(struct pt_regs, ds)
-};
-
-#define PM_REG_(x) (*(unsigned short *) \
- (reg_offset_pm[((unsigned)x)] + (u_char *)FPU_info->regs))
-
-/* Decode the SIB byte. This function assumes mod != 0 */
-static int sib(int mod, unsigned long *fpu_eip)
-{
- u_char ss, index, base;
- long offset;
-
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(1);
- FPU_get_user(base, (u_char __user *) (*fpu_eip)); /* The SIB byte */
- RE_ENTRANT_CHECK_ON;
- (*fpu_eip)++;
- ss = base >> 6;
- index = (base >> 3) & 7;
- base &= 7;
-
- if ((mod == 0) && (base == 5))
- offset = 0; /* No base register */
- else
- offset = REG_(base);
-
- if (index == 4) {
- /* No index register */
- /* A non-zero ss is illegal */
- if (ss)
- EXCEPTION(EX_Invalid);
- } else {
- offset += (REG_(index)) << ss;
- }
-
- if (mod == 1) {
- /* 8 bit signed displacement */
- long displacement;
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(1);
- FPU_get_user(displacement, (signed char __user *)(*fpu_eip));
- offset += displacement;
- RE_ENTRANT_CHECK_ON;
- (*fpu_eip)++;
- } else if (mod == 2 || base == 5) { /* The second condition also has mod==0 */
- /* 32 bit displacement */
- long displacement;
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(4);
- FPU_get_user(displacement, (long __user *)(*fpu_eip));
- offset += displacement;
- RE_ENTRANT_CHECK_ON;
- (*fpu_eip) += 4;
- }
-
- return offset;
-}
-
-static unsigned long vm86_segment(u_char segment, struct address *addr)
-{
- segment--;
-#ifdef PARANOID
- if (segment > PREFIX_SS_) {
- EXCEPTION(EX_INTERNAL | 0x130);
- math_abort(FPU_info, SIGSEGV);
- }
-#endif /* PARANOID */
- addr->selector = VM86_REG_(segment);
- return (unsigned long)VM86_REG_(segment) << 4;
-}
-
-/* This should work for 16 and 32 bit protected mode. */
-static long pm_address(u_char FPU_modrm, u_char segment,
- struct address *addr, long offset)
-{
- struct desc_struct descriptor;
- unsigned long base_address, limit, address, seg_top;
-
- segment--;
-
-#ifdef PARANOID
- /* segment is unsigned, so this also detects if segment was 0: */
- if (segment > PREFIX_SS_) {
- EXCEPTION(EX_INTERNAL | 0x132);
- math_abort(FPU_info, SIGSEGV);
- }
-#endif /* PARANOID */
-
- switch (segment) {
- case PREFIX_GS_ - 1:
- /* user gs handling can be lazy, use special accessors */
- savesegment(gs, addr->selector);
- break;
- default:
- addr->selector = PM_REG_(segment);
- }
-
- descriptor = FPU_get_ldt_descriptor(addr->selector);
- base_address = seg_get_base(&descriptor);
- address = base_address + offset;
- limit = seg_get_limit(&descriptor) + 1;
- limit *= seg_get_granularity(&descriptor);
- limit += base_address - 1;
- if (limit < base_address)
- limit = 0xffffffff;
-
- if (seg_expands_down(&descriptor)) {
- if (descriptor.g) {
- seg_top = 0xffffffff;
- } else {
- seg_top = base_address + (1 << 20);
- if (seg_top < base_address)
- seg_top = 0xffffffff;
- }
- access_limit =
- (address <= limit) || (address >= seg_top) ? 0 :
- ((seg_top - address) >= 255 ? 255 : seg_top - address);
- } else {
- access_limit =
- (address > limit) || (address < base_address) ? 0 :
- ((limit - address) >= 254 ? 255 : limit - address + 1);
- }
- if (seg_execute_only(&descriptor) ||
- (!seg_writable(&descriptor) && (FPU_modrm & FPU_WRITE_BIT))) {
- access_limit = 0;
- }
- return address;
-}
-
-/*
- MOD R/M byte: MOD == 3 has a special use for the FPU
- SIB byte used iff R/M = 100b
-
- 7 6 5 4 3 2 1 0
- ..... ......... .........
- MOD OPCODE(2) R/M
-
- SIB byte
-
- 7 6 5 4 3 2 1 0
- ..... ......... .........
- SS INDEX BASE
-
-*/
-
-void __user *FPU_get_address(u_char FPU_modrm, unsigned long *fpu_eip,
- struct address *addr, fpu_addr_modes addr_modes)
-{
- u_char mod;
- unsigned rm = FPU_modrm & 7;
- long *cpu_reg_ptr;
- int address = 0; /* Initialized just to stop compiler warnings. */
-
- /* Memory accessed via the cs selector is write protected
- in `non-segmented' 32 bit protected mode. */
- if (!addr_modes.default_mode && (FPU_modrm & FPU_WRITE_BIT)
- && (addr_modes.override.segment == PREFIX_CS_)) {
- math_abort(FPU_info, SIGSEGV);
- }
-
- addr->selector = FPU_DS; /* Default, for 32 bit non-segmented mode. */
-
- mod = (FPU_modrm >> 6) & 3;
-
- if (rm == 4 && mod != 3) {
- address = sib(mod, fpu_eip);
- } else {
- cpu_reg_ptr = ®_(rm);
- switch (mod) {
- case 0:
- if (rm == 5) {
- /* Special case: disp32 */
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(4);
- FPU_get_user(address,
- (unsigned long __user
- *)(*fpu_eip));
- (*fpu_eip) += 4;
- RE_ENTRANT_CHECK_ON;
- addr->offset = address;
- return (void __user *)address;
- } else {
- address = *cpu_reg_ptr; /* Just return the contents
- of the cpu register */
- addr->offset = address;
- return (void __user *)address;
- }
- case 1:
- /* 8 bit signed displacement */
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(1);
- FPU_get_user(address, (signed char __user *)(*fpu_eip));
- RE_ENTRANT_CHECK_ON;
- (*fpu_eip)++;
- break;
- case 2:
- /* 32 bit displacement */
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(4);
- FPU_get_user(address, (long __user *)(*fpu_eip));
- (*fpu_eip) += 4;
- RE_ENTRANT_CHECK_ON;
- break;
- case 3:
- /* Not legal for the FPU */
- EXCEPTION(EX_Invalid);
- }
- address += *cpu_reg_ptr;
- }
-
- addr->offset = address;
-
- switch (addr_modes.default_mode) {
- case 0:
- break;
- case VM86:
- address += vm86_segment(addr_modes.override.segment, addr);
- break;
- case PM16:
- case SEG32:
- address = pm_address(FPU_modrm, addr_modes.override.segment,
- addr, address);
- break;
- default:
- EXCEPTION(EX_INTERNAL | 0x133);
- }
-
- return (void __user *)address;
-}
-
-void __user *FPU_get_address_16(u_char FPU_modrm, unsigned long *fpu_eip,
- struct address *addr, fpu_addr_modes addr_modes)
-{
- u_char mod;
- unsigned rm = FPU_modrm & 7;
- int address = 0; /* Default used for mod == 0 */
-
- /* Memory accessed via the cs selector is write protected
- in `non-segmented' 32 bit protected mode. */
- if (!addr_modes.default_mode && (FPU_modrm & FPU_WRITE_BIT)
- && (addr_modes.override.segment == PREFIX_CS_)) {
- math_abort(FPU_info, SIGSEGV);
- }
-
- addr->selector = FPU_DS; /* Default, for 32 bit non-segmented mode. */
-
- mod = (FPU_modrm >> 6) & 3;
-
- switch (mod) {
- case 0:
- if (rm == 6) {
- /* Special case: disp16 */
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(2);
- FPU_get_user(address,
- (unsigned short __user *)(*fpu_eip));
- (*fpu_eip) += 2;
- RE_ENTRANT_CHECK_ON;
- goto add_segment;
- }
- break;
- case 1:
- /* 8 bit signed displacement */
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(1);
- FPU_get_user(address, (signed char __user *)(*fpu_eip));
- RE_ENTRANT_CHECK_ON;
- (*fpu_eip)++;
- break;
- case 2:
- /* 16 bit displacement */
- RE_ENTRANT_CHECK_OFF;
- FPU_code_access_ok(2);
- FPU_get_user(address, (unsigned short __user *)(*fpu_eip));
- (*fpu_eip) += 2;
- RE_ENTRANT_CHECK_ON;
- break;
- case 3:
- /* Not legal for the FPU */
- EXCEPTION(EX_Invalid);
- break;
- }
- switch (rm) {
- case 0:
- address += FPU_info->regs->bx + FPU_info->regs->si;
- break;
- case 1:
- address += FPU_info->regs->bx + FPU_info->regs->di;
- break;
- case 2:
- address += FPU_info->regs->bp + FPU_info->regs->si;
- if (addr_modes.override.segment == PREFIX_DEFAULT)
- addr_modes.override.segment = PREFIX_SS_;
- break;
- case 3:
- address += FPU_info->regs->bp + FPU_info->regs->di;
- if (addr_modes.override.segment == PREFIX_DEFAULT)
- addr_modes.override.segment = PREFIX_SS_;
- break;
- case 4:
- address += FPU_info->regs->si;
- break;
- case 5:
- address += FPU_info->regs->di;
- break;
- case 6:
- address += FPU_info->regs->bp;
- if (addr_modes.override.segment == PREFIX_DEFAULT)
- addr_modes.override.segment = PREFIX_SS_;
- break;
- case 7:
- address += FPU_info->regs->bx;
- break;
- }
-
- add_segment:
- address &= 0xffff;
-
- addr->offset = address;
-
- switch (addr_modes.default_mode) {
- case 0:
- break;
- case VM86:
- address += vm86_segment(addr_modes.override.segment, addr);
- break;
- case PM16:
- case SEG32:
- address = pm_address(FPU_modrm, addr_modes.override.segment,
- addr, address);
- break;
- default:
- EXCEPTION(EX_INTERNAL | 0x131);
- }
-
- return (void __user *)address;
-}
diff --git a/arch/x86/math-emu/load_store.c b/arch/x86/math-emu/load_store.c
deleted file mode 100644
index 4092df79de4f..000000000000
--- a/arch/x86/math-emu/load_store.c
+++ /dev/null
@@ -1,322 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | load_store.c |
- | |
- | This file contains most of the code to interpret the FPU instructions |
- | which load and store from user memory. |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | Note: |
- | The file contains code which accesses user memory. |
- | Emulator static data may change when user memory is accessed, due to |
- | other processes using the emulator while swapping is in progress. |
- +---------------------------------------------------------------------------*/
-
-#include <linux/uaccess.h>
-
-#include "fpu_system.h"
-#include "exception.h"
-#include "fpu_emu.h"
-#include "status_w.h"
-#include "control_w.h"
-
-#define _NONE_ 0 /* st0_ptr etc not needed */
-#define _REG0_ 1 /* Will be storing st(0) */
-#define _PUSH_ 3 /* Need to check for space to push onto stack */
-#define _null_ 4 /* Function illegal or not implemented */
-
-#define pop_0() { FPU_settag0(TAG_Empty); top++; }
-
-/* index is a 5-bit value: (3-bit FPU_modrm.reg field | opcode[2,1]) */
-static u_char const type_table[32] = {
- _PUSH_, _PUSH_, _PUSH_, _PUSH_, /* /0: d9:fld f32, db:fild m32, dd:fld f64, df:fild m16 */
- _null_, _REG0_, _REG0_, _REG0_, /* /1: d9:undef, db,dd,df:fisttp m32/64/16 */
- _REG0_, _REG0_, _REG0_, _REG0_, /* /2: d9:fst f32, db:fist m32, dd:fst f64, df:fist m16 */
- _REG0_, _REG0_, _REG0_, _REG0_, /* /3: d9:fstp f32, db:fistp m32, dd:fstp f64, df:fistp m16 */
- _NONE_, _null_, _NONE_, _PUSH_,
- _NONE_, _PUSH_, _null_, _PUSH_,
- _NONE_, _null_, _NONE_, _REG0_,
- _NONE_, _REG0_, _NONE_, _REG0_
-};
-
-u_char const data_sizes_16[32] = {
- 4, 4, 8, 2,
- 0, 4, 8, 2, /* /1: d9:undef, db,dd,df:fisttp */
- 4, 4, 8, 2,
- 4, 4, 8, 2,
- 14, 0, 94, 10, 2, 10, 0, 8,
- 14, 0, 94, 10, 2, 10, 2, 8
-};
-
-static u_char const data_sizes_32[32] = {
- 4, 4, 8, 2,
- 0, 4, 8, 2, /* /1: d9:undef, db,dd,df:fisttp */
- 4, 4, 8, 2,
- 4, 4, 8, 2,
- 28, 0, 108, 10, 2, 10, 0, 8,
- 28, 0, 108, 10, 2, 10, 2, 8
-};
-
-int FPU_load_store(u_char type, fpu_addr_modes addr_modes,
- void __user * data_address)
-{
- FPU_REG loaded_data;
- FPU_REG *st0_ptr;
- u_char st0_tag = TAG_Empty; /* This is just to stop a gcc warning. */
- u_char loaded_tag;
- int sv_cw;
-
- st0_ptr = NULL; /* Initialized just to stop compiler warnings. */
-
- if (addr_modes.default_mode & PROTECTED) {
- if (addr_modes.default_mode == SEG32) {
- if (access_limit < data_sizes_32[type])
- math_abort(FPU_info, SIGSEGV);
- } else if (addr_modes.default_mode == PM16) {
- if (access_limit < data_sizes_16[type])
- math_abort(FPU_info, SIGSEGV);
- }
-#ifdef PARANOID
- else
- EXCEPTION(EX_INTERNAL | 0x140);
-#endif /* PARANOID */
- }
-
- switch (type_table[type]) {
- case _NONE_:
- break;
- case _REG0_:
- st0_ptr = &st(0); /* Some of these instructions pop after
- storing */
- st0_tag = FPU_gettag0();
- break;
- case _PUSH_:
- {
- if (FPU_gettagi(-1) != TAG_Empty) {
- FPU_stack_overflow();
- return 0;
- }
- top--;
- st0_ptr = &st(0);
- }
- break;
- case _null_:
- FPU_illegal();
- return 0;
-#ifdef PARANOID
- default:
- EXCEPTION(EX_INTERNAL | 0x141);
- return 0;
-#endif /* PARANOID */
- }
-
- switch (type) {
- /* type is a 5-bit value: (3-bit FPU_modrm.reg field | opcode[2,1]) */
- case 000: /* fld m32real (d9 /0) */
- clear_C1();
- loaded_tag =
- FPU_load_single((float __user *)data_address, &loaded_data);
- if ((loaded_tag == TAG_Special)
- && isNaN(&loaded_data)
- && (real_1op_NaN(&loaded_data) < 0)) {
- top++;
- break;
- }
- FPU_copy_to_reg0(&loaded_data, loaded_tag);
- break;
- case 001: /* fild m32int (db /0) */
- clear_C1();
- loaded_tag =
- FPU_load_int32((long __user *)data_address, &loaded_data);
- FPU_copy_to_reg0(&loaded_data, loaded_tag);
- break;
- case 002: /* fld m64real (dd /0) */
- clear_C1();
- loaded_tag =
- FPU_load_double((double __user *)data_address,
- &loaded_data);
- if ((loaded_tag == TAG_Special)
- && isNaN(&loaded_data)
- && (real_1op_NaN(&loaded_data) < 0)) {
- top++;
- break;
- }
- FPU_copy_to_reg0(&loaded_data, loaded_tag);
- break;
- case 003: /* fild m16int (df /0) */
- clear_C1();
- loaded_tag =
- FPU_load_int16((short __user *)data_address, &loaded_data);
- FPU_copy_to_reg0(&loaded_data, loaded_tag);
- break;
- /* case 004: undefined (d9 /1) */
- /* fisttp are enabled if CPUID(1).ECX(0) "sse3" is set */
- case 005: /* fisttp m32int (db /1) */
- clear_C1();
- sv_cw = control_word;
- control_word |= RC_CHOP;
- if (FPU_store_int32
- (st0_ptr, st0_tag, (long __user *)data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- control_word = sv_cw;
- break;
- case 006: /* fisttp m64int (dd /1) */
- clear_C1();
- sv_cw = control_word;
- control_word |= RC_CHOP;
- if (FPU_store_int64
- (st0_ptr, st0_tag, (long long __user *)data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- control_word = sv_cw;
- break;
- case 007: /* fisttp m16int (df /1) */
- clear_C1();
- sv_cw = control_word;
- control_word |= RC_CHOP;
- if (FPU_store_int16
- (st0_ptr, st0_tag, (short __user *)data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- control_word = sv_cw;
- break;
- case 010: /* fst m32real */
- clear_C1();
- FPU_store_single(st0_ptr, st0_tag,
- (float __user *)data_address);
- break;
- case 011: /* fist m32int */
- clear_C1();
- FPU_store_int32(st0_ptr, st0_tag, (long __user *)data_address);
- break;
- case 012: /* fst m64real */
- clear_C1();
- FPU_store_double(st0_ptr, st0_tag,
- (double __user *)data_address);
- break;
- case 013: /* fist m16int */
- clear_C1();
- FPU_store_int16(st0_ptr, st0_tag, (short __user *)data_address);
- break;
- case 014: /* fstp m32real */
- clear_C1();
- if (FPU_store_single
- (st0_ptr, st0_tag, (float __user *)data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- break;
- case 015: /* fistp m32int */
- clear_C1();
- if (FPU_store_int32
- (st0_ptr, st0_tag, (long __user *)data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- break;
- case 016: /* fstp m64real */
- clear_C1();
- if (FPU_store_double
- (st0_ptr, st0_tag, (double __user *)data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- break;
- case 017: /* fistp m16int */
- clear_C1();
- if (FPU_store_int16
- (st0_ptr, st0_tag, (short __user *)data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- break;
- case 020: /* fldenv m14/28byte */
- fldenv(addr_modes, (u_char __user *) data_address);
- /* Ensure that the values just loaded are not changed by
- fix-up operations. */
- return 1;
- case 022: /* frstor m94/108byte */
- FPU_frstor(addr_modes, (u_char __user *) data_address);
- /* Ensure that the values just loaded are not changed by
- fix-up operations. */
- return 1;
- case 023: /* fbld m80dec */
- clear_C1();
- loaded_tag = FPU_load_bcd((u_char __user *) data_address);
- FPU_settag0(loaded_tag);
- break;
- case 024: /* fldcw */
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(data_address, 2);
- FPU_get_user(control_word,
- (unsigned short __user *)data_address);
- RE_ENTRANT_CHECK_ON;
- if (partial_status & ~control_word & CW_Exceptions)
- partial_status |= (SW_Summary | SW_Backward);
- else
- partial_status &= ~(SW_Summary | SW_Backward);
-#ifdef PECULIAR_486
- control_word |= 0x40; /* An 80486 appears to always set this bit */
-#endif /* PECULIAR_486 */
- return 1;
- case 025: /* fld m80real */
- clear_C1();
- loaded_tag =
- FPU_load_extended((long double __user *)data_address, 0);
- FPU_settag0(loaded_tag);
- break;
- case 027: /* fild m64int */
- clear_C1();
- loaded_tag = FPU_load_int64((long long __user *)data_address);
- if (loaded_tag == TAG_Error)
- return 0;
- FPU_settag0(loaded_tag);
- break;
- case 030: /* fstenv m14/28byte */
- fstenv(addr_modes, (u_char __user *) data_address);
- return 1;
- case 032: /* fsave */
- fsave(addr_modes, (u_char __user *) data_address);
- return 1;
- case 033: /* fbstp m80dec */
- clear_C1();
- if (FPU_store_bcd
- (st0_ptr, st0_tag, (u_char __user *) data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- break;
- case 034: /* fstcw m16int */
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(data_address, 2);
- FPU_put_user(control_word,
- (unsigned short __user *)data_address);
- RE_ENTRANT_CHECK_ON;
- return 1;
- case 035: /* fstp m80real */
- clear_C1();
- if (FPU_store_extended
- (st0_ptr, st0_tag, (long double __user *)data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- break;
- case 036: /* fstsw m2byte */
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(data_address, 2);
- FPU_put_user(status_word(),
- (unsigned short __user *)data_address);
- RE_ENTRANT_CHECK_ON;
- return 1;
- case 037: /* fistp m64int */
- clear_C1();
- if (FPU_store_int64
- (st0_ptr, st0_tag, (long long __user *)data_address))
- pop_0(); /* pop only if the number was actually stored
- (see the 80486 manual p16-28) */
- break;
- }
- return 0;
-}
diff --git a/arch/x86/math-emu/mul_Xsig.S b/arch/x86/math-emu/mul_Xsig.S
deleted file mode 100644
index 54a031b66142..000000000000
--- a/arch/x86/math-emu/mul_Xsig.S
+++ /dev/null
@@ -1,179 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | mul_Xsig.S |
- | |
- | Multiply a 12 byte fixed point number by another fixed point number. |
- | |
- | Copyright (C) 1992,1994,1995 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...obi.maths.monash.edu.au |
- | |
- | Call from C as: |
- | void mul32_Xsig(Xsig *x, unsigned b) |
- | |
- | void mul64_Xsig(Xsig *x, unsigned long long *b) |
- | |
- | void mul_Xsig_Xsig(Xsig *x, unsigned *b) |
- | |
- | The result is neither rounded nor normalized, and the ls bit or so may |
- | be wrong. |
- | |
- +---------------------------------------------------------------------------*/
- .file "mul_Xsig.S"
-
-
-#include "fpu_emu.h"
-
-.text
-SYM_FUNC_START(mul32_Xsig)
- pushl %ebp
- movl %esp,%ebp
- subl $16,%esp
- pushl %esi
-
- movl PARAM1,%esi
- movl PARAM2,%ecx
-
- xor %eax,%eax
- movl %eax,-4(%ebp)
- movl %eax,-8(%ebp)
-
- movl (%esi),%eax /* lsl of Xsig */
- mull %ecx /* msl of b */
- movl %edx,-12(%ebp)
-
- movl 4(%esi),%eax /* midl of Xsig */
- mull %ecx /* msl of b */
- addl %eax,-12(%ebp)
- adcl %edx,-8(%ebp)
- adcl $0,-4(%ebp)
-
- movl 8(%esi),%eax /* msl of Xsig */
- mull %ecx /* msl of b */
- addl %eax,-8(%ebp)
- adcl %edx,-4(%ebp)
-
- movl -12(%ebp),%eax
- movl %eax,(%esi)
- movl -8(%ebp),%eax
- movl %eax,4(%esi)
- movl -4(%ebp),%eax
- movl %eax,8(%esi)
-
- popl %esi
- leave
- RET
-SYM_FUNC_END(mul32_Xsig)
-
-
-SYM_FUNC_START(mul64_Xsig)
- pushl %ebp
- movl %esp,%ebp
- subl $16,%esp
- pushl %esi
-
- movl PARAM1,%esi
- movl PARAM2,%ecx
-
- xor %eax,%eax
- movl %eax,-4(%ebp)
- movl %eax,-8(%ebp)
-
- movl (%esi),%eax /* lsl of Xsig */
- mull 4(%ecx) /* msl of b */
- movl %edx,-12(%ebp)
-
- movl 4(%esi),%eax /* midl of Xsig */
- mull (%ecx) /* lsl of b */
- addl %edx,-12(%ebp)
- adcl $0,-8(%ebp)
- adcl $0,-4(%ebp)
-
- movl 4(%esi),%eax /* midl of Xsig */
- mull 4(%ecx) /* msl of b */
- addl %eax,-12(%ebp)
- adcl %edx,-8(%ebp)
- adcl $0,-4(%ebp)
-
- movl 8(%esi),%eax /* msl of Xsig */
- mull (%ecx) /* lsl of b */
- addl %eax,-12(%ebp)
- adcl %edx,-8(%ebp)
- adcl $0,-4(%ebp)
-
- movl 8(%esi),%eax /* msl of Xsig */
- mull 4(%ecx) /* msl of b */
- addl %eax,-8(%ebp)
- adcl %edx,-4(%ebp)
-
- movl -12(%ebp),%eax
- movl %eax,(%esi)
- movl -8(%ebp),%eax
- movl %eax,4(%esi)
- movl -4(%ebp),%eax
- movl %eax,8(%esi)
-
- popl %esi
- leave
- RET
-SYM_FUNC_END(mul64_Xsig)
-
-
-
-SYM_FUNC_START(mul_Xsig_Xsig)
- pushl %ebp
- movl %esp,%ebp
- subl $16,%esp
- pushl %esi
-
- movl PARAM1,%esi
- movl PARAM2,%ecx
-
- xor %eax,%eax
- movl %eax,-4(%ebp)
- movl %eax,-8(%ebp)
-
- movl (%esi),%eax /* lsl of Xsig */
- mull 8(%ecx) /* msl of b */
- movl %edx,-12(%ebp)
-
- movl 4(%esi),%eax /* midl of Xsig */
- mull 4(%ecx) /* midl of b */
- addl %edx,-12(%ebp)
- adcl $0,-8(%ebp)
- adcl $0,-4(%ebp)
-
- movl 8(%esi),%eax /* msl of Xsig */
- mull (%ecx) /* lsl of b */
- addl %edx,-12(%ebp)
- adcl $0,-8(%ebp)
- adcl $0,-4(%ebp)
-
- movl 4(%esi),%eax /* midl of Xsig */
- mull 8(%ecx) /* msl of b */
- addl %eax,-12(%ebp)
- adcl %edx,-8(%ebp)
- adcl $0,-4(%ebp)
-
- movl 8(%esi),%eax /* msl of Xsig */
- mull 4(%ecx) /* midl of b */
- addl %eax,-12(%ebp)
- adcl %edx,-8(%ebp)
- adcl $0,-4(%ebp)
-
- movl 8(%esi),%eax /* msl of Xsig */
- mull 8(%ecx) /* msl of b */
- addl %eax,-8(%ebp)
- adcl %edx,-4(%ebp)
-
- movl -12(%ebp),%edx
- movl %edx,(%esi)
- movl -8(%ebp),%edx
- movl %edx,4(%esi)
- movl -4(%ebp),%edx
- movl %edx,8(%esi)
-
- popl %esi
- leave
- RET
-SYM_FUNC_END(mul_Xsig_Xsig)
diff --git a/arch/x86/math-emu/poly.h b/arch/x86/math-emu/poly.h
deleted file mode 100644
index fc1c887ca073..000000000000
--- a/arch/x86/math-emu/poly.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | poly.h |
- | |
- | Header file for the FPU-emu poly*.c source files. |
- | |
- | Copyright (C) 1994,1999 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...bpc.org.au |
- | |
- | Declarations and definitions for functions operating on Xsig (12-byte |
- | extended-significand) quantities. |
- | |
- +---------------------------------------------------------------------------*/
-
-#ifndef _POLY_H
-#define _POLY_H
-
-/* This 12-byte structure is used to improve the accuracy of computation
- of transcendental functions.
- Intended to be used to get results better than 8-byte computation
- allows. 9-byte would probably be sufficient.
- */
-typedef struct {
- unsigned long lsw;
- unsigned long midw;
- unsigned long msw;
-} Xsig;
-
-asmlinkage void mul64(unsigned long long const *a, unsigned long long const *b,
- unsigned long long *result);
-asmlinkage void polynomial_Xsig(Xsig *, const unsigned long long *x,
- const unsigned long long terms[], const int n);
-
-asmlinkage void mul32_Xsig(Xsig *, const unsigned long mult);
-asmlinkage void mul64_Xsig(Xsig *, const unsigned long long *mult);
-asmlinkage void mul_Xsig_Xsig(Xsig *dest, const Xsig *mult);
-
-asmlinkage void shr_Xsig(Xsig *, const int n);
-asmlinkage int round_Xsig(Xsig *);
-asmlinkage int norm_Xsig(Xsig *);
-asmlinkage void div_Xsig(Xsig *x1, const Xsig *x2, const Xsig *dest);
-
-/* Macro to extract the most significant 32 bits from a long long */
-#define LL_MSW(x) (((unsigned long *)&x)[1])
-
-/* Macro to initialize an Xsig struct */
-#define MK_XSIG(a,b,c) { c, b, a }
-
-/* Macro to access the 8 ms bytes of an Xsig as a long long */
-#define XSIG_LL(x) (*(unsigned long long *)&x.midw)
-
-/*
- Need to run gcc with optimizations on to get these to
- actually be in-line.
- */
-
-/* Multiply two fixed-point 32 bit numbers, producing a 32 bit result.
- The answer is the ms word of the product. */
-/* Some versions of gcc make it difficult to stop eax from being clobbered.
- Merely specifying that it is used doesn't work...
- */
-static inline unsigned long mul_32_32(const unsigned long arg1,
- const unsigned long arg2)
-{
- int retval;
- asm volatile ("mull %2; movl %%edx,%%eax":"=a" (retval)
- :"0"(arg1), "g"(arg2)
- :"dx");
- return retval;
-}
-
-/* Add the 12 byte Xsig x2 to Xsig dest, with no checks for overflow. */
-static inline void add_Xsig_Xsig(Xsig *dest, const Xsig *x2)
-{
- asm volatile ("movl %1,%%edi; movl %2,%%esi;\n"
- "movl (%%esi),%%eax; addl %%eax,(%%edi);\n"
- "movl 4(%%esi),%%eax; adcl %%eax,4(%%edi);\n"
- "movl 8(%%esi),%%eax; adcl %%eax,8(%%edi);\n":"=g"
- (*dest):"g"(dest), "g"(x2)
- :"ax", "si", "di");
-}
-
-/* Add the 12 byte Xsig x2 to Xsig dest, adjust exp if overflow occurs. */
-/* Note: the constraints in the asm statement didn't always work properly
- with gcc 2.5.8. Changing from using edi to using ecx got around the
- problem, but keep fingers crossed! */
-static inline void add_two_Xsig(Xsig *dest, const Xsig *x2, long int *exp)
-{
- asm volatile ("movl %2,%%ecx; movl %3,%%esi;\n"
- "movl (%%esi),%%eax; addl %%eax,(%%ecx);\n"
- "movl 4(%%esi),%%eax; adcl %%eax,4(%%ecx);\n"
- "movl 8(%%esi),%%eax; adcl %%eax,8(%%ecx);\n"
- "jnc 0f;\n"
- "rcrl 8(%%ecx); rcrl 4(%%ecx); rcrl (%%ecx)\n"
- "movl %4,%%ecx; incl (%%ecx)\n"
- "movl $1,%%eax; jmp 1f;\n"
- "0: xorl %%eax,%%eax;\n" "1:\n":"=g" (*exp), "=g"(*dest)
- :"g"(dest), "g"(x2), "g"(exp)
- :"cx", "si", "ax");
-}
-
-/* Negate (subtract from 1.0) the 12 byte Xsig */
-/* This is faster in a loop on my 386 than using the "neg" instruction. */
-static inline void negate_Xsig(Xsig *x)
-{
- asm volatile ("movl %1,%%esi;\n"
- "xorl %%ecx,%%ecx;\n"
- "movl %%ecx,%%eax; subl (%%esi),%%eax; movl %%eax,(%%esi);\n"
- "movl %%ecx,%%eax; sbbl 4(%%esi),%%eax; movl %%eax,4(%%esi);\n"
- "movl %%ecx,%%eax; sbbl 8(%%esi),%%eax; movl %%eax,8(%%esi);\n":"=g"
- (*x):"g"(x):"si", "ax", "cx");
-}
-
-#endif /* _POLY_H */
diff --git a/arch/x86/math-emu/poly_2xm1.c b/arch/x86/math-emu/poly_2xm1.c
deleted file mode 100644
index aa33006bafd5..000000000000
--- a/arch/x86/math-emu/poly_2xm1.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | poly_2xm1.c |
- | |
- | Function to compute 2^x-1 by a polynomial approximation. |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "reg_constant.h"
-#include "fpu_emu.h"
-#include "fpu_system.h"
-#include "control_w.h"
-#include "poly.h"
-
-#define HIPOWER 11
-static const unsigned long long lterms[HIPOWER] = {
- 0x0000000000000000LL, /* This term done separately as 12 bytes */
- 0xf5fdeffc162c7543LL,
- 0x1c6b08d704a0bfa6LL,
- 0x0276556df749cc21LL,
- 0x002bb0ffcf14f6b8LL,
- 0x0002861225ef751cLL,
- 0x00001ffcbfcd5422LL,
- 0x00000162c005d5f1LL,
- 0x0000000da96ccb1bLL,
- 0x0000000078d1b897LL,
- 0x000000000422b029LL
-};
-
-static const Xsig hiterm = MK_XSIG(0xb17217f7, 0xd1cf79ab, 0xc8a39194);
-
-/* Four slices: 0.0 : 0.25 : 0.50 : 0.75 : 1.0,
- These numbers are 2^(1/4), 2^(1/2), and 2^(3/4)
- */
-static const Xsig shiftterm0 = MK_XSIG(0, 0, 0);
-static const Xsig shiftterm1 = MK_XSIG(0x9837f051, 0x8db8a96f, 0x46ad2318);
-static const Xsig shiftterm2 = MK_XSIG(0xb504f333, 0xf9de6484, 0x597d89b3);
-static const Xsig shiftterm3 = MK_XSIG(0xd744fcca, 0xd69d6af4, 0x39a68bb9);
-
-static const Xsig *shiftterm[] = { &shiftterm0, &shiftterm1,
- &shiftterm2, &shiftterm3
-};
-
-/*--- poly_2xm1() -----------------------------------------------------------+
- | Requires st(0) which is TAG_Valid and < 1. |
- +---------------------------------------------------------------------------*/
-int poly_2xm1(u_char sign, FPU_REG *arg, FPU_REG *result)
-{
- long int exponent, shift;
- unsigned long long Xll;
- Xsig accumulator, Denom, argSignif;
- u_char tag;
-
- exponent = exponent16(arg);
-
-#ifdef PARANOID
- if (exponent >= 0) { /* Don't want a |number| >= 1.0 */
- /* Number negative, too large, or not Valid. */
- EXCEPTION(EX_INTERNAL | 0x127);
- return 1;
- }
-#endif /* PARANOID */
-
- argSignif.lsw = 0;
- XSIG_LL(argSignif) = Xll = significand(arg);
-
- if (exponent == -1) {
- shift = (argSignif.msw & 0x40000000) ? 3 : 2;
- /* subtract 0.5 or 0.75 */
- exponent -= 2;
- XSIG_LL(argSignif) <<= 2;
- Xll <<= 2;
- } else if (exponent == -2) {
- shift = 1;
- /* subtract 0.25 */
- exponent--;
- XSIG_LL(argSignif) <<= 1;
- Xll <<= 1;
- } else
- shift = 0;
-
- if (exponent < -2) {
- /* Shift the argument right by the required places. */
- if (FPU_shrx(&Xll, -2 - exponent) >= 0x80000000U)
- Xll++; /* round up */
- }
-
- accumulator.lsw = accumulator.midw = accumulator.msw = 0;
- polynomial_Xsig(&accumulator, &Xll, lterms, HIPOWER - 1);
- mul_Xsig_Xsig(&accumulator, &argSignif);
- shr_Xsig(&accumulator, 3);
-
- mul_Xsig_Xsig(&argSignif, &hiterm); /* The leading term */
- add_two_Xsig(&accumulator, &argSignif, &exponent);
-
- if (shift) {
- /* The argument is large, use the identity:
- f(x+a) = f(a) * (f(x) + 1) - 1;
- */
- shr_Xsig(&accumulator, -exponent);
- accumulator.msw |= 0x80000000; /* add 1.0 */
- mul_Xsig_Xsig(&accumulator, shiftterm[shift]);
- accumulator.msw &= 0x3fffffff; /* subtract 1.0 */
- exponent = 1;
- }
-
- if (sign != SIGN_POS) {
- /* The argument is negative, use the identity:
- f(-x) = -f(x) / (1 + f(x))
- */
- Denom.lsw = accumulator.lsw;
- XSIG_LL(Denom) = XSIG_LL(accumulator);
- if (exponent < 0)
- shr_Xsig(&Denom, -exponent);
- else if (exponent > 0) {
- /* exponent must be 1 here */
- XSIG_LL(Denom) <<= 1;
- if (Denom.lsw & 0x80000000)
- XSIG_LL(Denom) |= 1;
- (Denom.lsw) <<= 1;
- }
- Denom.msw |= 0x80000000; /* add 1.0 */
- div_Xsig(&accumulator, &Denom, &accumulator);
- }
-
- /* Convert to 64 bit signed-compatible */
- exponent += round_Xsig(&accumulator);
-
- result = &st(0);
- significand(result) = XSIG_LL(accumulator);
- setexponent16(result, exponent);
-
- tag = FPU_round(result, 1, 0, FULL_PRECISION, sign);
-
- setsign(result, sign);
- FPU_settag0(tag);
-
- return 0;
-
-}
diff --git a/arch/x86/math-emu/poly_atan.c b/arch/x86/math-emu/poly_atan.c
deleted file mode 100644
index 7e7412c5a1fe..000000000000
--- a/arch/x86/math-emu/poly_atan.c
+++ /dev/null
@@ -1,209 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | poly_atan.c |
- | |
- | Compute the arctan of a FPU_REG, using a polynomial approximation. |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "reg_constant.h"
-#include "fpu_emu.h"
-#include "fpu_system.h"
-#include "status_w.h"
-#include "control_w.h"
-#include "poly.h"
-
-#define HIPOWERon 6 /* odd poly, negative terms */
-static const unsigned long long oddnegterms[HIPOWERon] = {
- 0x0000000000000000LL, /* Dummy (not for - 1.0) */
- 0x015328437f756467LL,
- 0x0005dda27b73dec6LL,
- 0x0000226bf2bfb91aLL,
- 0x000000ccc439c5f7LL,
- 0x0000000355438407LL
-};
-
-#define HIPOWERop 6 /* odd poly, positive terms */
-static const unsigned long long oddplterms[HIPOWERop] = {
-/* 0xaaaaaaaaaaaaaaabLL, transferred to fixedpterm[] */
- 0x0db55a71875c9ac2LL,
- 0x0029fce2d67880b0LL,
- 0x0000dfd3908b4596LL,
- 0x00000550fd61dab4LL,
- 0x0000001c9422b3f9LL,
- 0x000000003e3301e1LL
-};
-
-static const unsigned long long denomterm = 0xebd9b842c5c53a0eLL;
-
-static const Xsig fixedpterm = MK_XSIG(0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa);
-
-static const Xsig pi_signif = MK_XSIG(0xc90fdaa2, 0x2168c234, 0xc4c6628b);
-
-/*--- poly_atan() -----------------------------------------------------------+
- | |
- +---------------------------------------------------------------------------*/
-void poly_atan(FPU_REG *st0_ptr, u_char st0_tag,
- FPU_REG *st1_ptr, u_char st1_tag)
-{
- u_char transformed, inverted, sign1, sign2;
- int exponent;
- long int dummy_exp;
- Xsig accumulator, Numer, Denom, accumulatore, argSignif, argSq, argSqSq;
- u_char tag;
-
- sign1 = getsign(st0_ptr);
- sign2 = getsign(st1_ptr);
- if (st0_tag == TAG_Valid) {
- exponent = exponent(st0_ptr);
- } else {
- /* This gives non-compatible stack contents... */
- FPU_to_exp16(st0_ptr, st0_ptr);
- exponent = exponent16(st0_ptr);
- }
- if (st1_tag == TAG_Valid) {
- exponent -= exponent(st1_ptr);
- } else {
- /* This gives non-compatible stack contents... */
- FPU_to_exp16(st1_ptr, st1_ptr);
- exponent -= exponent16(st1_ptr);
- }
-
- if ((exponent < 0) || ((exponent == 0) &&
- ((st0_ptr->sigh < st1_ptr->sigh) ||
- ((st0_ptr->sigh == st1_ptr->sigh) &&
- (st0_ptr->sigl < st1_ptr->sigl))))) {
- inverted = 1;
- Numer.lsw = Denom.lsw = 0;
- XSIG_LL(Numer) = significand(st0_ptr);
- XSIG_LL(Denom) = significand(st1_ptr);
- } else {
- inverted = 0;
- exponent = -exponent;
- Numer.lsw = Denom.lsw = 0;
- XSIG_LL(Numer) = significand(st1_ptr);
- XSIG_LL(Denom) = significand(st0_ptr);
- }
- div_Xsig(&Numer, &Denom, &argSignif);
- exponent += norm_Xsig(&argSignif);
-
- if ((exponent >= -1)
- || ((exponent == -2) && (argSignif.msw > 0xd413ccd0))) {
- /* The argument is greater than sqrt(2)-1 (=0.414213562...) */
- /* Convert the argument by an identity for atan */
- transformed = 1;
-
- if (exponent >= 0) {
-#ifdef PARANOID
- if (!((exponent == 0) &&
- (argSignif.lsw == 0) && (argSignif.midw == 0) &&
- (argSignif.msw == 0x80000000))) {
- EXCEPTION(EX_INTERNAL | 0x104); /* There must be a logic error */
- return;
- }
-#endif /* PARANOID */
- argSignif.msw = 0; /* Make the transformed arg -> 0.0 */
- } else {
- Numer.lsw = Denom.lsw = argSignif.lsw;
- XSIG_LL(Numer) = XSIG_LL(Denom) = XSIG_LL(argSignif);
-
- if (exponent < -1)
- shr_Xsig(&Numer, -1 - exponent);
- negate_Xsig(&Numer);
-
- shr_Xsig(&Denom, -exponent);
- Denom.msw |= 0x80000000;
-
- div_Xsig(&Numer, &Denom, &argSignif);
-
- exponent = -1 + norm_Xsig(&argSignif);
- }
- } else {
- transformed = 0;
- }
-
- argSq.lsw = argSignif.lsw;
- argSq.midw = argSignif.midw;
- argSq.msw = argSignif.msw;
- mul_Xsig_Xsig(&argSq, &argSq);
-
- argSqSq.lsw = argSq.lsw;
- argSqSq.midw = argSq.midw;
- argSqSq.msw = argSq.msw;
- mul_Xsig_Xsig(&argSqSq, &argSqSq);
-
- accumulatore.lsw = argSq.lsw;
- XSIG_LL(accumulatore) = XSIG_LL(argSq);
-
- shr_Xsig(&argSq, 2 * (-1 - exponent - 1));
- shr_Xsig(&argSqSq, 4 * (-1 - exponent - 1));
-
- /* Now have argSq etc with binary point at the left
- .1xxxxxxxx */
-
- /* Do the basic fixed point polynomial evaluation */
- accumulator.msw = accumulator.midw = accumulator.lsw = 0;
- polynomial_Xsig(&accumulator, &XSIG_LL(argSqSq),
- oddplterms, HIPOWERop - 1);
- mul64_Xsig(&accumulator, &XSIG_LL(argSq));
- negate_Xsig(&accumulator);
- polynomial_Xsig(&accumulator, &XSIG_LL(argSqSq), oddnegterms,
- HIPOWERon - 1);
- negate_Xsig(&accumulator);
- add_two_Xsig(&accumulator, &fixedpterm, &dummy_exp);
-
- mul64_Xsig(&accumulatore, &denomterm);
- shr_Xsig(&accumulatore, 1 + 2 * (-1 - exponent));
- accumulatore.msw |= 0x80000000;
-
- div_Xsig(&accumulator, &accumulatore, &accumulator);
-
- mul_Xsig_Xsig(&accumulator, &argSignif);
- mul_Xsig_Xsig(&accumulator, &argSq);
-
- shr_Xsig(&accumulator, 3);
- negate_Xsig(&accumulator);
- add_Xsig_Xsig(&accumulator, &argSignif);
-
- if (transformed) {
- /* compute pi/4 - accumulator */
- shr_Xsig(&accumulator, -1 - exponent);
- negate_Xsig(&accumulator);
- add_Xsig_Xsig(&accumulator, &pi_signif);
- exponent = -1;
- }
-
- if (inverted) {
- /* compute pi/2 - accumulator */
- shr_Xsig(&accumulator, -exponent);
- negate_Xsig(&accumulator);
- add_Xsig_Xsig(&accumulator, &pi_signif);
- exponent = 0;
- }
-
- if (sign1) {
- /* compute pi - accumulator */
- shr_Xsig(&accumulator, 1 - exponent);
- negate_Xsig(&accumulator);
- add_Xsig_Xsig(&accumulator, &pi_signif);
- exponent = 1;
- }
-
- exponent += round_Xsig(&accumulator);
-
- significand(st1_ptr) = XSIG_LL(accumulator);
- setexponent16(st1_ptr, exponent);
-
- tag = FPU_round(st1_ptr, 1, 0, FULL_PRECISION, sign2);
- FPU_settagi(1, tag);
-
- set_precision_flag_up(); /* We do not really know if up or down,
- use this as the default. */
-
-}
diff --git a/arch/x86/math-emu/poly_l2.c b/arch/x86/math-emu/poly_l2.c
deleted file mode 100644
index 98b6949bb854..000000000000
--- a/arch/x86/math-emu/poly_l2.c
+++ /dev/null
@@ -1,245 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | poly_l2.c |
- | |
- | Compute the base 2 log of a FPU_REG, using a polynomial approximation. |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "reg_constant.h"
-#include "fpu_emu.h"
-#include "fpu_system.h"
-#include "control_w.h"
-#include "poly.h"
-
-static void log2_kernel(FPU_REG const *arg, u_char argsign,
- Xsig * accum_result, long int *expon);
-
-/*--- poly_l2() -------------------------------------------------------------+
- | Base 2 logarithm by a polynomial approximation. |
- +---------------------------------------------------------------------------*/
-void poly_l2(FPU_REG *st0_ptr, FPU_REG *st1_ptr, u_char st1_sign)
-{
- long int exponent, expon, expon_expon;
- Xsig accumulator, expon_accum, yaccum;
- u_char sign, argsign;
- FPU_REG x;
- int tag;
-
- exponent = exponent16(st0_ptr);
-
- /* From st0_ptr, make a number > sqrt(2)/2 and < sqrt(2) */
- if (st0_ptr->sigh > (unsigned)0xb504f334) {
- /* Treat as sqrt(2)/2 < st0_ptr < 1 */
- significand(&x) = -significand(st0_ptr);
- setexponent16(&x, -1);
- exponent++;
- argsign = SIGN_NEG;
- } else {
- /* Treat as 1 <= st0_ptr < sqrt(2) */
- x.sigh = st0_ptr->sigh - 0x80000000;
- x.sigl = st0_ptr->sigl;
- setexponent16(&x, 0);
- argsign = SIGN_POS;
- }
- tag = FPU_normalize_nuo(&x);
-
- if (tag == TAG_Zero) {
- expon = 0;
- accumulator.msw = accumulator.midw = accumulator.lsw = 0;
- } else {
- log2_kernel(&x, argsign, &accumulator, &expon);
- }
-
- if (exponent < 0) {
- sign = SIGN_NEG;
- exponent = -exponent;
- } else
- sign = SIGN_POS;
- expon_accum.msw = exponent;
- expon_accum.midw = expon_accum.lsw = 0;
- if (exponent) {
- expon_expon = 31 + norm_Xsig(&expon_accum);
- shr_Xsig(&accumulator, expon_expon - expon);
-
- if (sign ^ argsign)
- negate_Xsig(&accumulator);
- add_Xsig_Xsig(&accumulator, &expon_accum);
- } else {
- expon_expon = expon;
- sign = argsign;
- }
-
- yaccum.lsw = 0;
- XSIG_LL(yaccum) = significand(st1_ptr);
- mul_Xsig_Xsig(&accumulator, &yaccum);
-
- expon_expon += round_Xsig(&accumulator);
-
- if (accumulator.msw == 0) {
- FPU_copy_to_reg1(&CONST_Z, TAG_Zero);
- return;
- }
-
- significand(st1_ptr) = XSIG_LL(accumulator);
- setexponent16(st1_ptr, expon_expon + exponent16(st1_ptr) + 1);
-
- tag = FPU_round(st1_ptr, 1, 0, FULL_PRECISION, sign ^ st1_sign);
- FPU_settagi(1, tag);
-
- set_precision_flag_up(); /* 80486 appears to always do this */
-
- return;
-
-}
-
-/*--- poly_l2p1() -----------------------------------------------------------+
- | Base 2 logarithm by a polynomial approximation. |
- | log2(x+1) |
- +---------------------------------------------------------------------------*/
-int poly_l2p1(u_char sign0, u_char sign1,
- FPU_REG * st0_ptr, FPU_REG * st1_ptr, FPU_REG * dest)
-{
- u_char tag;
- long int exponent;
- Xsig accumulator, yaccum;
-
- if (exponent16(st0_ptr) < 0) {
- log2_kernel(st0_ptr, sign0, &accumulator, &exponent);
-
- yaccum.lsw = 0;
- XSIG_LL(yaccum) = significand(st1_ptr);
- mul_Xsig_Xsig(&accumulator, &yaccum);
-
- exponent += round_Xsig(&accumulator);
-
- exponent += exponent16(st1_ptr) + 1;
- if (exponent < EXP_WAY_UNDER)
- exponent = EXP_WAY_UNDER;
-
- significand(dest) = XSIG_LL(accumulator);
- setexponent16(dest, exponent);
-
- tag = FPU_round(dest, 1, 0, FULL_PRECISION, sign0 ^ sign1);
- FPU_settagi(1, tag);
-
- if (tag == TAG_Valid)
- set_precision_flag_up(); /* 80486 appears to always do this */
- } else {
- /* The magnitude of st0_ptr is far too large. */
-
- if (sign0 != SIGN_POS) {
- /* Trying to get the log of a negative number. */
-#ifdef PECULIAR_486 /* Stupid 80486 doesn't worry about log(negative). */
- changesign(st1_ptr);
-#else
- if (arith_invalid(1) < 0)
- return 1;
-#endif /* PECULIAR_486 */
- }
-
- /* 80486 appears to do this */
- if (sign0 == SIGN_NEG)
- set_precision_flag_down();
- else
- set_precision_flag_up();
- }
-
- if (exponent(dest) <= EXP_UNDER)
- EXCEPTION(EX_Underflow);
-
- return 0;
-
-}
-
-#undef HIPOWER
-#define HIPOWER 10
-static const unsigned long long logterms[HIPOWER] = {
- 0x2a8eca5705fc2ef0LL,
- 0xf6384ee1d01febceLL,
- 0x093bb62877cdf642LL,
- 0x006985d8a9ec439bLL,
- 0x0005212c4f55a9c8LL,
- 0x00004326a16927f0LL,
- 0x0000038d1d80a0e7LL,
- 0x0000003141cc80c6LL,
- 0x00000002b1668c9fLL,
- 0x000000002c7a46aaLL
-};
-
-static const unsigned long leadterm = 0xb8000000;
-
-/*--- log2_kernel() ---------------------------------------------------------+
- | Base 2 logarithm by a polynomial approximation. |
- | log2(x+1) |
- +---------------------------------------------------------------------------*/
-static void log2_kernel(FPU_REG const *arg, u_char argsign, Xsig *accum_result,
- long int *expon)
-{
- long int exponent, adj;
- unsigned long long Xsq;
- Xsig accumulator, Numer, Denom, argSignif, arg_signif;
-
- exponent = exponent16(arg);
- Numer.lsw = Denom.lsw = 0;
- XSIG_LL(Numer) = XSIG_LL(Denom) = significand(arg);
- if (argsign == SIGN_POS) {
- shr_Xsig(&Denom, 2 - (1 + exponent));
- Denom.msw |= 0x80000000;
- div_Xsig(&Numer, &Denom, &argSignif);
- } else {
- shr_Xsig(&Denom, 1 - (1 + exponent));
- negate_Xsig(&Denom);
- if (Denom.msw & 0x80000000) {
- div_Xsig(&Numer, &Denom, &argSignif);
- exponent++;
- } else {
- /* Denom must be 1.0 */
- argSignif.lsw = Numer.lsw;
- argSignif.midw = Numer.midw;
- argSignif.msw = Numer.msw;
- }
- }
-
-#ifndef PECULIAR_486
- /* Should check here that |local_arg| is within the valid range */
- if (exponent >= -2) {
- if ((exponent > -2) || (argSignif.msw > (unsigned)0xafb0ccc0)) {
- /* The argument is too large */
- }
- }
-#endif /* PECULIAR_486 */
-
- arg_signif.lsw = argSignif.lsw;
- XSIG_LL(arg_signif) = XSIG_LL(argSignif);
- adj = norm_Xsig(&argSignif);
- accumulator.lsw = argSignif.lsw;
- XSIG_LL(accumulator) = XSIG_LL(argSignif);
- mul_Xsig_Xsig(&accumulator, &accumulator);
- shr_Xsig(&accumulator, 2 * (-1 - (1 + exponent + adj)));
- Xsq = XSIG_LL(accumulator);
- if (accumulator.lsw & 0x80000000)
- Xsq++;
-
- accumulator.msw = accumulator.midw = accumulator.lsw = 0;
- /* Do the basic fixed point polynomial evaluation */
- polynomial_Xsig(&accumulator, &Xsq, logterms, HIPOWER - 1);
-
- mul_Xsig_Xsig(&accumulator, &argSignif);
- shr_Xsig(&accumulator, 6 - adj);
-
- mul32_Xsig(&arg_signif, leadterm);
- add_two_Xsig(&accumulator, &arg_signif, &exponent);
-
- *expon = exponent + 1;
- accum_result->lsw = accumulator.lsw;
- accum_result->midw = accumulator.midw;
- accum_result->msw = accumulator.msw;
-
-}
diff --git a/arch/x86/math-emu/poly_sin.c b/arch/x86/math-emu/poly_sin.c
deleted file mode 100644
index c192fba51526..000000000000
--- a/arch/x86/math-emu/poly_sin.c
+++ /dev/null
@@ -1,379 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | poly_sin.c |
- | |
- | Computation of an approximation of the sin function and the cosine |
- | function by a polynomial. |
- | |
- | Copyright (C) 1992,1993,1994,1997,1999 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...bpc.org.au |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "reg_constant.h"
-#include "fpu_emu.h"
-#include "fpu_system.h"
-#include "control_w.h"
-#include "poly.h"
-
-#define N_COEFF_P 4
-#define N_COEFF_N 4
-
-static const unsigned long long pos_terms_l[N_COEFF_P] = {
- 0xaaaaaaaaaaaaaaabLL,
- 0x00d00d00d00cf906LL,
- 0x000006b99159a8bbLL,
- 0x000000000d7392e6LL
-};
-
-static const unsigned long long neg_terms_l[N_COEFF_N] = {
- 0x2222222222222167LL,
- 0x0002e3bc74aab624LL,
- 0x0000000b09229062LL,
- 0x00000000000c7973LL
-};
-
-#define N_COEFF_PH 4
-#define N_COEFF_NH 4
-static const unsigned long long pos_terms_h[N_COEFF_PH] = {
- 0x0000000000000000LL,
- 0x05b05b05b05b0406LL,
- 0x000049f93edd91a9LL,
- 0x00000000c9c9ed62LL
-};
-
-static const unsigned long long neg_terms_h[N_COEFF_NH] = {
- 0xaaaaaaaaaaaaaa98LL,
- 0x001a01a01a019064LL,
- 0x0000008f76c68a77LL,
- 0x0000000000d58f5eLL
-};
-
-/*--- poly_sine() -----------------------------------------------------------+
- | |
- +---------------------------------------------------------------------------*/
-void poly_sine(FPU_REG *st0_ptr)
-{
- int exponent, echange;
- Xsig accumulator, argSqrd, argTo4;
- unsigned long fix_up, adj;
- unsigned long long fixed_arg;
- FPU_REG result;
-
- exponent = exponent(st0_ptr);
-
- accumulator.lsw = accumulator.midw = accumulator.msw = 0;
-
- /* Split into two ranges, for arguments below and above 1.0 */
- /* The boundary between upper and lower is approx 0.88309101259 */
- if ((exponent < -1)
- || ((exponent == -1) && (st0_ptr->sigh <= 0xe21240aa))) {
- /* The argument is <= 0.88309101259 */
-
- argSqrd.msw = st0_ptr->sigh;
- argSqrd.midw = st0_ptr->sigl;
- argSqrd.lsw = 0;
- mul64_Xsig(&argSqrd, &significand(st0_ptr));
- shr_Xsig(&argSqrd, 2 * (-1 - exponent));
- argTo4.msw = argSqrd.msw;
- argTo4.midw = argSqrd.midw;
- argTo4.lsw = argSqrd.lsw;
- mul_Xsig_Xsig(&argTo4, &argTo4);
-
- polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), neg_terms_l,
- N_COEFF_N - 1);
- mul_Xsig_Xsig(&accumulator, &argSqrd);
- negate_Xsig(&accumulator);
-
- polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), pos_terms_l,
- N_COEFF_P - 1);
-
- shr_Xsig(&accumulator, 2); /* Divide by four */
- accumulator.msw |= 0x80000000; /* Add 1.0 */
-
- mul64_Xsig(&accumulator, &significand(st0_ptr));
- mul64_Xsig(&accumulator, &significand(st0_ptr));
- mul64_Xsig(&accumulator, &significand(st0_ptr));
-
- /* Divide by four, FPU_REG compatible, etc */
- exponent = 3 * exponent;
-
- /* The minimum exponent difference is 3 */
- shr_Xsig(&accumulator, exponent(st0_ptr) - exponent);
-
- negate_Xsig(&accumulator);
- XSIG_LL(accumulator) += significand(st0_ptr);
-
- echange = round_Xsig(&accumulator);
-
- setexponentpos(&result, exponent(st0_ptr) + echange);
- } else {
- /* The argument is > 0.88309101259 */
- /* We use sin(st(0)) = cos(pi/2-st(0)) */
-
- fixed_arg = significand(st0_ptr);
-
- if (exponent == 0) {
- /* The argument is >= 1.0 */
-
- /* Put the binary point at the left. */
- fixed_arg <<= 1;
- }
- /* pi/2 in hex is: 1.921fb54442d18469 898CC51701B839A2 52049C1 */
- fixed_arg = 0x921fb54442d18469LL - fixed_arg;
- /* There is a special case which arises due to rounding, to fix here. */
- if (fixed_arg == 0xffffffffffffffffLL)
- fixed_arg = 0;
-
- XSIG_LL(argSqrd) = fixed_arg;
- argSqrd.lsw = 0;
- mul64_Xsig(&argSqrd, &fixed_arg);
-
- XSIG_LL(argTo4) = XSIG_LL(argSqrd);
- argTo4.lsw = argSqrd.lsw;
- mul_Xsig_Xsig(&argTo4, &argTo4);
-
- polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), neg_terms_h,
- N_COEFF_NH - 1);
- mul_Xsig_Xsig(&accumulator, &argSqrd);
- negate_Xsig(&accumulator);
-
- polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), pos_terms_h,
- N_COEFF_PH - 1);
- negate_Xsig(&accumulator);
-
- mul64_Xsig(&accumulator, &fixed_arg);
- mul64_Xsig(&accumulator, &fixed_arg);
-
- shr_Xsig(&accumulator, 3);
- negate_Xsig(&accumulator);
-
- add_Xsig_Xsig(&accumulator, &argSqrd);
-
- shr_Xsig(&accumulator, 1);
-
- accumulator.lsw |= 1; /* A zero accumulator here would cause problems */
- negate_Xsig(&accumulator);
-
- /* The basic computation is complete. Now fix the answer to
- compensate for the error due to the approximation used for
- pi/2
- */
-
- /* This has an exponent of -65 */
- fix_up = 0x898cc517;
- /* The fix-up needs to be improved for larger args */
- if (argSqrd.msw & 0xffc00000) {
- /* Get about 32 bit precision in these: */
- fix_up -= mul_32_32(0x898cc517, argSqrd.msw) / 6;
- }
- fix_up = mul_32_32(fix_up, LL_MSW(fixed_arg));
-
- adj = accumulator.lsw; /* temp save */
- accumulator.lsw -= fix_up;
- if (accumulator.lsw > adj)
- XSIG_LL(accumulator)--;
-
- echange = round_Xsig(&accumulator);
-
- setexponentpos(&result, echange - 1);
- }
-
- significand(&result) = XSIG_LL(accumulator);
- setsign(&result, getsign(st0_ptr));
- FPU_copy_to_reg0(&result, TAG_Valid);
-
-#ifdef PARANOID
- if ((exponent(&result) >= 0)
- && (significand(&result) > 0x8000000000000000LL)) {
- EXCEPTION(EX_INTERNAL | 0x150);
- }
-#endif /* PARANOID */
-
-}
-
-/*--- poly_cos() ------------------------------------------------------------+
- | |
- +---------------------------------------------------------------------------*/
-void poly_cos(FPU_REG *st0_ptr)
-{
- FPU_REG result;
- long int exponent, exp2, echange;
- Xsig accumulator, argSqrd, fix_up, argTo4;
- unsigned long long fixed_arg;
-
-#ifdef PARANOID
- if ((exponent(st0_ptr) > 0)
- || ((exponent(st0_ptr) == 0)
- && (significand(st0_ptr) > 0xc90fdaa22168c234LL))) {
- EXCEPTION(EX_Invalid);
- FPU_copy_to_reg0(&CONST_QNaN, TAG_Special);
- return;
- }
-#endif /* PARANOID */
-
- exponent = exponent(st0_ptr);
-
- accumulator.lsw = accumulator.midw = accumulator.msw = 0;
-
- if ((exponent < -1)
- || ((exponent == -1) && (st0_ptr->sigh <= 0xb00d6f54))) {
- /* arg is < 0.687705 */
-
- argSqrd.msw = st0_ptr->sigh;
- argSqrd.midw = st0_ptr->sigl;
- argSqrd.lsw = 0;
- mul64_Xsig(&argSqrd, &significand(st0_ptr));
-
- if (exponent < -1) {
- /* shift the argument right by the required places */
- shr_Xsig(&argSqrd, 2 * (-1 - exponent));
- }
-
- argTo4.msw = argSqrd.msw;
- argTo4.midw = argSqrd.midw;
- argTo4.lsw = argSqrd.lsw;
- mul_Xsig_Xsig(&argTo4, &argTo4);
-
- polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), neg_terms_h,
- N_COEFF_NH - 1);
- mul_Xsig_Xsig(&accumulator, &argSqrd);
- negate_Xsig(&accumulator);
-
- polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), pos_terms_h,
- N_COEFF_PH - 1);
- negate_Xsig(&accumulator);
-
- mul64_Xsig(&accumulator, &significand(st0_ptr));
- mul64_Xsig(&accumulator, &significand(st0_ptr));
- shr_Xsig(&accumulator, -2 * (1 + exponent));
-
- shr_Xsig(&accumulator, 3);
- negate_Xsig(&accumulator);
-
- add_Xsig_Xsig(&accumulator, &argSqrd);
-
- shr_Xsig(&accumulator, 1);
-
- /* It doesn't matter if accumulator is all zero here, the
- following code will work ok */
- negate_Xsig(&accumulator);
-
- if (accumulator.lsw & 0x80000000)
- XSIG_LL(accumulator)++;
- if (accumulator.msw == 0) {
- /* The result is 1.0 */
- FPU_copy_to_reg0(&CONST_1, TAG_Valid);
- return;
- } else {
- significand(&result) = XSIG_LL(accumulator);
-
- /* will be a valid positive nr with expon = -1 */
- setexponentpos(&result, -1);
- }
- } else {
- fixed_arg = significand(st0_ptr);
-
- if (exponent == 0) {
- /* The argument is >= 1.0 */
-
- /* Put the binary point at the left. */
- fixed_arg <<= 1;
- }
- /* pi/2 in hex is: 1.921fb54442d18469 898CC51701B839A2 52049C1 */
- fixed_arg = 0x921fb54442d18469LL - fixed_arg;
- /* There is a special case which arises due to rounding, to fix here. */
- if (fixed_arg == 0xffffffffffffffffLL)
- fixed_arg = 0;
-
- exponent = -1;
- exp2 = -1;
-
- /* A shift is needed here only for a narrow range of arguments,
- i.e. for fixed_arg approx 2^-32, but we pick up more... */
- if (!(LL_MSW(fixed_arg) & 0xffff0000)) {
- fixed_arg <<= 16;
- exponent -= 16;
- exp2 -= 16;
- }
-
- XSIG_LL(argSqrd) = fixed_arg;
- argSqrd.lsw = 0;
- mul64_Xsig(&argSqrd, &fixed_arg);
-
- if (exponent < -1) {
- /* shift the argument right by the required places */
- shr_Xsig(&argSqrd, 2 * (-1 - exponent));
- }
-
- argTo4.msw = argSqrd.msw;
- argTo4.midw = argSqrd.midw;
- argTo4.lsw = argSqrd.lsw;
- mul_Xsig_Xsig(&argTo4, &argTo4);
-
- polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), neg_terms_l,
- N_COEFF_N - 1);
- mul_Xsig_Xsig(&accumulator, &argSqrd);
- negate_Xsig(&accumulator);
-
- polynomial_Xsig(&accumulator, &XSIG_LL(argTo4), pos_terms_l,
- N_COEFF_P - 1);
-
- shr_Xsig(&accumulator, 2); /* Divide by four */
- accumulator.msw |= 0x80000000; /* Add 1.0 */
-
- mul64_Xsig(&accumulator, &fixed_arg);
- mul64_Xsig(&accumulator, &fixed_arg);
- mul64_Xsig(&accumulator, &fixed_arg);
-
- /* Divide by four, FPU_REG compatible, etc */
- exponent = 3 * exponent;
-
- /* The minimum exponent difference is 3 */
- shr_Xsig(&accumulator, exp2 - exponent);
-
- negate_Xsig(&accumulator);
- XSIG_LL(accumulator) += fixed_arg;
-
- /* The basic computation is complete. Now fix the answer to
- compensate for the error due to the approximation used for
- pi/2
- */
-
- /* This has an exponent of -65 */
- XSIG_LL(fix_up) = 0x898cc51701b839a2ll;
- fix_up.lsw = 0;
-
- /* The fix-up needs to be improved for larger args */
- if (argSqrd.msw & 0xffc00000) {
- /* Get about 32 bit precision in these: */
- fix_up.msw -= mul_32_32(0x898cc517, argSqrd.msw) / 2;
- fix_up.msw += mul_32_32(0x898cc517, argTo4.msw) / 24;
- }
-
- exp2 += norm_Xsig(&accumulator);
- shr_Xsig(&accumulator, 1); /* Prevent overflow */
- exp2++;
- shr_Xsig(&fix_up, 65 + exp2);
-
- add_Xsig_Xsig(&accumulator, &fix_up);
-
- echange = round_Xsig(&accumulator);
-
- setexponentpos(&result, exp2 + echange);
- significand(&result) = XSIG_LL(accumulator);
- }
-
- FPU_copy_to_reg0(&result, TAG_Valid);
-
-#ifdef PARANOID
- if ((exponent(&result) >= 0)
- && (significand(&result) > 0x8000000000000000LL)) {
- EXCEPTION(EX_INTERNAL | 0x151);
- }
-#endif /* PARANOID */
-
-}
diff --git a/arch/x86/math-emu/poly_tan.c b/arch/x86/math-emu/poly_tan.c
deleted file mode 100644
index 1f5b1d712323..000000000000
--- a/arch/x86/math-emu/poly_tan.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | poly_tan.c |
- | |
- | Compute the tan of a FPU_REG, using a polynomial approximation. |
- | |
- | Copyright (C) 1992,1993,1994,1997,1999 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...bpc.org.au |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "reg_constant.h"
-#include "fpu_emu.h"
-#include "fpu_system.h"
-#include "control_w.h"
-#include "poly.h"
-
-#define HiPOWERop 3 /* odd poly, positive terms */
-static const unsigned long long oddplterm[HiPOWERop] = {
- 0x0000000000000000LL,
- 0x0051a1cf08fca228LL,
- 0x0000000071284ff7LL
-};
-
-#define HiPOWERon 2 /* odd poly, negative terms */
-static const unsigned long long oddnegterm[HiPOWERon] = {
- 0x1291a9a184244e80LL,
- 0x0000583245819c21LL
-};
-
-#define HiPOWERep 2 /* even poly, positive terms */
-static const unsigned long long evenplterm[HiPOWERep] = {
- 0x0e848884b539e888LL,
- 0x00003c7f18b887daLL
-};
-
-#define HiPOWERen 2 /* even poly, negative terms */
-static const unsigned long long evennegterm[HiPOWERen] = {
- 0xf1f0200fd51569ccLL,
- 0x003afb46105c4432LL
-};
-
-static const unsigned long long twothirds = 0xaaaaaaaaaaaaaaabLL;
-
-/*--- poly_tan() ------------------------------------------------------------+
- | |
- +---------------------------------------------------------------------------*/
-void poly_tan(FPU_REG *st0_ptr)
-{
- long int exponent;
- int invert;
- Xsig argSq, argSqSq, accumulatoro, accumulatore, accum,
- argSignif, fix_up;
- unsigned long adj;
-
- exponent = exponent(st0_ptr);
-
-#ifdef PARANOID
- if (signnegative(st0_ptr)) { /* Can't hack a number < 0.0 */
- arith_invalid(0);
- return;
- } /* Need a positive number */
-#endif /* PARANOID */
-
- /* Split the problem into two domains, smaller and larger than pi/4 */
- if ((exponent == 0)
- || ((exponent == -1) && (st0_ptr->sigh > 0xc90fdaa2))) {
- /* The argument is greater than (approx) pi/4 */
- invert = 1;
- accum.lsw = 0;
- XSIG_LL(accum) = significand(st0_ptr);
-
- if (exponent == 0) {
- /* The argument is >= 1.0 */
- /* Put the binary point at the left. */
- XSIG_LL(accum) <<= 1;
- }
- /* pi/2 in hex is: 1.921fb54442d18469 898CC51701B839A2 52049C1 */
- XSIG_LL(accum) = 0x921fb54442d18469LL - XSIG_LL(accum);
- /* This is a special case which arises due to rounding. */
- if (XSIG_LL(accum) == 0xffffffffffffffffLL) {
- FPU_settag0(TAG_Valid);
- significand(st0_ptr) = 0x8a51e04daabda360LL;
- setexponent16(st0_ptr,
- (0x41 + EXTENDED_Ebias) | SIGN_Negative);
- return;
- }
-
- argSignif.lsw = accum.lsw;
- XSIG_LL(argSignif) = XSIG_LL(accum);
- exponent = -1 + norm_Xsig(&argSignif);
- } else {
- invert = 0;
- argSignif.lsw = 0;
- XSIG_LL(accum) = XSIG_LL(argSignif) = significand(st0_ptr);
-
- if (exponent < -1) {
- /* shift the argument right by the required places */
- if (FPU_shrx(&XSIG_LL(accum), -1 - exponent) >=
- 0x80000000U)
- XSIG_LL(accum)++; /* round up */
- }
- }
-
- XSIG_LL(argSq) = XSIG_LL(accum);
- argSq.lsw = accum.lsw;
- mul_Xsig_Xsig(&argSq, &argSq);
- XSIG_LL(argSqSq) = XSIG_LL(argSq);
- argSqSq.lsw = argSq.lsw;
- mul_Xsig_Xsig(&argSqSq, &argSqSq);
-
- /* Compute the negative terms for the numerator polynomial */
- accumulatoro.msw = accumulatoro.midw = accumulatoro.lsw = 0;
- polynomial_Xsig(&accumulatoro, &XSIG_LL(argSqSq), oddnegterm,
- HiPOWERon - 1);
- mul_Xsig_Xsig(&accumulatoro, &argSq);
- negate_Xsig(&accumulatoro);
- /* Add the positive terms */
- polynomial_Xsig(&accumulatoro, &XSIG_LL(argSqSq), oddplterm,
- HiPOWERop - 1);
-
- /* Compute the positive terms for the denominator polynomial */
- accumulatore.msw = accumulatore.midw = accumulatore.lsw = 0;
- polynomial_Xsig(&accumulatore, &XSIG_LL(argSqSq), evenplterm,
- HiPOWERep - 1);
- mul_Xsig_Xsig(&accumulatore, &argSq);
- negate_Xsig(&accumulatore);
- /* Add the negative terms */
- polynomial_Xsig(&accumulatore, &XSIG_LL(argSqSq), evennegterm,
- HiPOWERen - 1);
- /* Multiply by arg^2 */
- mul64_Xsig(&accumulatore, &XSIG_LL(argSignif));
- mul64_Xsig(&accumulatore, &XSIG_LL(argSignif));
- /* de-normalize and divide by 2 */
- shr_Xsig(&accumulatore, -2 * (1 + exponent) + 1);
- negate_Xsig(&accumulatore); /* This does 1 - accumulator */
-
- /* Now find the ratio. */
- if (accumulatore.msw == 0) {
- /* accumulatoro must contain 1.0 here, (actually, 0) but it
- really doesn't matter what value we use because it will
- have negligible effect in later calculations
- */
- XSIG_LL(accum) = 0x8000000000000000LL;
- accum.lsw = 0;
- } else {
- div_Xsig(&accumulatoro, &accumulatore, &accum);
- }
-
- /* Multiply by 1/3 * arg^3 */
- mul64_Xsig(&accum, &XSIG_LL(argSignif));
- mul64_Xsig(&accum, &XSIG_LL(argSignif));
- mul64_Xsig(&accum, &XSIG_LL(argSignif));
- mul64_Xsig(&accum, &twothirds);
- shr_Xsig(&accum, -2 * (exponent + 1));
-
- /* tan(arg) = arg + accum */
- add_two_Xsig(&accum, &argSignif, &exponent);
-
- if (invert) {
- /* We now have the value of tan(pi_2 - arg) where pi_2 is an
- approximation for pi/2
- */
- /* The next step is to fix the answer to compensate for the
- error due to the approximation used for pi/2
- */
-
- /* This is (approx) delta, the error in our approx for pi/2
- (see above). It has an exponent of -65
- */
- XSIG_LL(fix_up) = 0x898cc51701b839a2LL;
- fix_up.lsw = 0;
-
- if (exponent == 0)
- adj = 0xffffffff; /* We want approx 1.0 here, but
- this is close enough. */
- else if (exponent > -30) {
- adj = accum.msw >> -(exponent + 1); /* tan */
- adj = mul_32_32(adj, adj); /* tan^2 */
- } else
- adj = 0;
- adj = mul_32_32(0x898cc517, adj); /* delta * tan^2 */
-
- fix_up.msw += adj;
- if (!(fix_up.msw & 0x80000000)) { /* did fix_up overflow ? */
- /* Yes, we need to add an msb */
- shr_Xsig(&fix_up, 1);
- fix_up.msw |= 0x80000000;
- shr_Xsig(&fix_up, 64 + exponent);
- } else
- shr_Xsig(&fix_up, 65 + exponent);
-
- add_two_Xsig(&accum, &fix_up, &exponent);
-
- /* accum now contains tan(pi/2 - arg).
- Use tan(arg) = 1.0 / tan(pi/2 - arg)
- */
- accumulatoro.lsw = accumulatoro.midw = 0;
- accumulatoro.msw = 0x80000000;
- div_Xsig(&accumulatoro, &accum, &accum);
- exponent = -exponent - 1;
- }
-
- /* Transfer the result */
- round_Xsig(&accum);
- FPU_settag0(TAG_Valid);
- significand(st0_ptr) = XSIG_LL(accum);
- setexponent16(st0_ptr, exponent + EXTENDED_Ebias); /* Result is positive. */
-
-}
diff --git a/arch/x86/math-emu/polynom_Xsig.S b/arch/x86/math-emu/polynom_Xsig.S
deleted file mode 100644
index 35fd723fc0df..000000000000
--- a/arch/x86/math-emu/polynom_Xsig.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | polynomial_Xsig.S |
- | |
- | Fixed point arithmetic polynomial evaluation. |
- | |
- | Copyright (C) 1992,1993,1994,1995 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...obi.maths.monash.edu.au |
- | |
- | Call from C as: |
- | void polynomial_Xsig(Xsig *accum, unsigned long long x, |
- | unsigned long long terms[], int n) |
- | |
- | Computes: |
- | terms[0] + (terms[1] + (terms[2] + ... + (terms[n-1]*x)*x)*x)*x) ... )*x |
- | and adds the result to the 12 byte Xsig. |
- | The terms[] are each 8 bytes, but all computation is performed to 12 byte |
- | precision. |
- | |
- | This function must be used carefully: most overflow of intermediate |
- | results is controlled, but overflow of the result is not. |
- | |
- +---------------------------------------------------------------------------*/
- .file "polynomial_Xsig.S"
-
-#include "fpu_emu.h"
-
-
-#define TERM_SIZE $8
-#define SUM_MS -20(%ebp) /* sum ms long */
-#define SUM_MIDDLE -24(%ebp) /* sum middle long */
-#define SUM_LS -28(%ebp) /* sum ls long */
-#define ACCUM_MS -4(%ebp) /* accum ms long */
-#define ACCUM_MIDDLE -8(%ebp) /* accum middle long */
-#define ACCUM_LS -12(%ebp) /* accum ls long */
-#define OVERFLOWED -16(%ebp) /* addition overflow flag */
-
-.text
-SYM_FUNC_START(polynomial_Xsig)
- pushl %ebp
- movl %esp,%ebp
- subl $32,%esp
- pushl %esi
- pushl %edi
- pushl %ebx
-
- movl PARAM2,%esi /* x */
- movl PARAM3,%edi /* terms */
-
- movl TERM_SIZE,%eax
- mull PARAM4 /* n */
- addl %eax,%edi
-
- movl 4(%edi),%edx /* terms[n] */
- movl %edx,SUM_MS
- movl (%edi),%edx /* terms[n] */
- movl %edx,SUM_MIDDLE
- xor %eax,%eax
- movl %eax,SUM_LS
- movb %al,OVERFLOWED
-
- subl TERM_SIZE,%edi
- decl PARAM4
- js L_accum_done
-
-L_accum_loop:
- xor %eax,%eax
- movl %eax,ACCUM_MS
- movl %eax,ACCUM_MIDDLE
-
- movl SUM_MIDDLE,%eax
- mull (%esi) /* x ls long */
- movl %edx,ACCUM_LS
-
- movl SUM_MIDDLE,%eax
- mull 4(%esi) /* x ms long */
- addl %eax,ACCUM_LS
- adcl %edx,ACCUM_MIDDLE
- adcl $0,ACCUM_MS
-
- movl SUM_MS,%eax
- mull (%esi) /* x ls long */
- addl %eax,ACCUM_LS
- adcl %edx,ACCUM_MIDDLE
- adcl $0,ACCUM_MS
-
- movl SUM_MS,%eax
- mull 4(%esi) /* x ms long */
- addl %eax,ACCUM_MIDDLE
- adcl %edx,ACCUM_MS
-
- testb $0xff,OVERFLOWED
- jz L_no_overflow
-
- movl (%esi),%eax
- addl %eax,ACCUM_MIDDLE
- movl 4(%esi),%eax
- adcl %eax,ACCUM_MS /* This could overflow too */
-
-L_no_overflow:
-
-/*
- * Now put the sum of next term and the accumulator
- * into the sum register
- */
- movl ACCUM_LS,%eax
- addl (%edi),%eax /* term ls long */
- movl %eax,SUM_LS
- movl ACCUM_MIDDLE,%eax
- adcl (%edi),%eax /* term ls long */
- movl %eax,SUM_MIDDLE
- movl ACCUM_MS,%eax
- adcl 4(%edi),%eax /* term ms long */
- movl %eax,SUM_MS
- sbbb %al,%al
- movb %al,OVERFLOWED /* Used in the next iteration */
-
- subl TERM_SIZE,%edi
- decl PARAM4
- jns L_accum_loop
-
-L_accum_done:
- movl PARAM1,%edi /* accum */
- movl SUM_LS,%eax
- addl %eax,(%edi)
- movl SUM_MIDDLE,%eax
- adcl %eax,4(%edi)
- movl SUM_MS,%eax
- adcl %eax,8(%edi)
-
- popl %ebx
- popl %edi
- popl %esi
- leave
- RET
-SYM_FUNC_END(polynomial_Xsig)
diff --git a/arch/x86/math-emu/reg_add_sub.c b/arch/x86/math-emu/reg_add_sub.c
deleted file mode 100644
index 29451dd07556..000000000000
--- a/arch/x86/math-emu/reg_add_sub.c
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | reg_add_sub.c |
- | |
- | Functions to add or subtract two registers and put the result in a third. |
- | |
- | Copyright (C) 1992,1993,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | For each function, the destination may be any FPU_REG, including one of |
- | the source FPU_REGs. |
- | Each function returns 0 if the answer is o.k., otherwise a non-zero |
- | value is returned, indicating either an exception condition or an |
- | internal error. |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "reg_constant.h"
-#include "fpu_emu.h"
-#include "control_w.h"
-#include "fpu_system.h"
-
-static
-int add_sub_specials(FPU_REG const *a, u_char taga, u_char signa,
- FPU_REG const *b, u_char tagb, u_char signb,
- FPU_REG * dest, int deststnr, int control_w);
-
-/*
- Operates on st(0) and st(n), or on st(0) and temporary data.
- The destination must be one of the source st(x).
- */
-int FPU_add(FPU_REG const *b, u_char tagb, int deststnr, int control_w)
-{
- FPU_REG *a = &st(0);
- FPU_REG *dest = &st(deststnr);
- u_char signb = getsign(b);
- u_char taga = FPU_gettag0();
- u_char signa = getsign(a);
- u_char saved_sign = getsign(dest);
- int diff, tag, expa, expb;
-
- if (!(taga | tagb)) {
- expa = exponent(a);
- expb = exponent(b);
-
- valid_add:
- /* Both registers are valid */
- if (!(signa ^ signb)) {
- /* signs are the same */
- tag =
- FPU_u_add(a, b, dest, control_w, signa, expa, expb);
- } else {
- /* The signs are different, so do a subtraction */
- diff = expa - expb;
- if (!diff) {
- diff = a->sigh - b->sigh; /* This works only if the ms bits
- are identical. */
- if (!diff) {
- diff = a->sigl > b->sigl;
- if (!diff)
- diff = -(a->sigl < b->sigl);
- }
- }
-
- if (diff > 0) {
- tag =
- FPU_u_sub(a, b, dest, control_w, signa,
- expa, expb);
- } else if (diff < 0) {
- tag =
- FPU_u_sub(b, a, dest, control_w, signb,
- expb, expa);
- } else {
- FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
- /* sign depends upon rounding mode */
- setsign(dest, ((control_w & CW_RC) != RC_DOWN)
- ? SIGN_POS : SIGN_NEG);
- return TAG_Zero;
- }
- }
-
- if (tag < 0) {
- setsign(dest, saved_sign);
- return tag;
- }
- FPU_settagi(deststnr, tag);
- return tag;
- }
-
- if (taga == TAG_Special)
- taga = FPU_Special(a);
- if (tagb == TAG_Special)
- tagb = FPU_Special(b);
-
- if (((taga == TAG_Valid) && (tagb == TW_Denormal))
- || ((taga == TW_Denormal) && (tagb == TAG_Valid))
- || ((taga == TW_Denormal) && (tagb == TW_Denormal))) {
- FPU_REG x, y;
-
- if (denormal_operand() < 0)
- return FPU_Exception;
-
- FPU_to_exp16(a, &x);
- FPU_to_exp16(b, &y);
- a = &x;
- b = &y;
- expa = exponent16(a);
- expb = exponent16(b);
- goto valid_add;
- }
-
- if ((taga == TW_NaN) || (tagb == TW_NaN)) {
- if (deststnr == 0)
- return real_2op_NaN(b, tagb, deststnr, a);
- else
- return real_2op_NaN(a, taga, deststnr, a);
- }
-
- return add_sub_specials(a, taga, signa, b, tagb, signb,
- dest, deststnr, control_w);
-}
-
-/* Subtract b from a. (a-b) -> dest */
-int FPU_sub(int flags, int rm, int control_w)
-{
- FPU_REG const *a, *b;
- FPU_REG *dest;
- u_char taga, tagb, signa, signb, saved_sign, sign;
- int diff, tag = 0, expa, expb, deststnr;
-
- a = &st(0);
- taga = FPU_gettag0();
-
- deststnr = 0;
- if (flags & LOADED) {
- b = (FPU_REG *) rm;
- tagb = flags & 0x0f;
- } else {
- b = &st(rm);
- tagb = FPU_gettagi(rm);
-
- if (flags & DEST_RM)
- deststnr = rm;
- }
-
- signa = getsign(a);
- signb = getsign(b);
-
- if (flags & REV) {
- signa ^= SIGN_NEG;
- signb ^= SIGN_NEG;
- }
-
- dest = &st(deststnr);
- saved_sign = getsign(dest);
-
- if (!(taga | tagb)) {
- expa = exponent(a);
- expb = exponent(b);
-
- valid_subtract:
- /* Both registers are valid */
-
- diff = expa - expb;
-
- if (!diff) {
- diff = a->sigh - b->sigh; /* Works only if ms bits are identical */
- if (!diff) {
- diff = a->sigl > b->sigl;
- if (!diff)
- diff = -(a->sigl < b->sigl);
- }
- }
-
- switch ((((int)signa) * 2 + signb) / SIGN_NEG) {
- case 0: /* P - P */
- case 3: /* N - N */
- if (diff > 0) {
- /* |a| > |b| */
- tag =
- FPU_u_sub(a, b, dest, control_w, signa,
- expa, expb);
- } else if (diff == 0) {
- FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
-
- /* sign depends upon rounding mode */
- setsign(dest, ((control_w & CW_RC) != RC_DOWN)
- ? SIGN_POS : SIGN_NEG);
- return TAG_Zero;
- } else {
- sign = signa ^ SIGN_NEG;
- tag =
- FPU_u_sub(b, a, dest, control_w, sign, expb,
- expa);
- }
- break;
- case 1: /* P - N */
- tag =
- FPU_u_add(a, b, dest, control_w, SIGN_POS, expa,
- expb);
- break;
- case 2: /* N - P */
- tag =
- FPU_u_add(a, b, dest, control_w, SIGN_NEG, expa,
- expb);
- break;
-#ifdef PARANOID
- default:
- EXCEPTION(EX_INTERNAL | 0x111);
- return -1;
-#endif
- }
- if (tag < 0) {
- setsign(dest, saved_sign);
- return tag;
- }
- FPU_settagi(deststnr, tag);
- return tag;
- }
-
- if (taga == TAG_Special)
- taga = FPU_Special(a);
- if (tagb == TAG_Special)
- tagb = FPU_Special(b);
-
- if (((taga == TAG_Valid) && (tagb == TW_Denormal))
- || ((taga == TW_Denormal) && (tagb == TAG_Valid))
- || ((taga == TW_Denormal) && (tagb == TW_Denormal))) {
- FPU_REG x, y;
-
- if (denormal_operand() < 0)
- return FPU_Exception;
-
- FPU_to_exp16(a, &x);
- FPU_to_exp16(b, &y);
- a = &x;
- b = &y;
- expa = exponent16(a);
- expb = exponent16(b);
-
- goto valid_subtract;
- }
-
- if ((taga == TW_NaN) || (tagb == TW_NaN)) {
- FPU_REG const *d1, *d2;
- if (flags & REV) {
- d1 = b;
- d2 = a;
- } else {
- d1 = a;
- d2 = b;
- }
- if (flags & LOADED)
- return real_2op_NaN(b, tagb, deststnr, d1);
- if (flags & DEST_RM)
- return real_2op_NaN(a, taga, deststnr, d2);
- else
- return real_2op_NaN(b, tagb, deststnr, d2);
- }
-
- return add_sub_specials(a, taga, signa, b, tagb, signb ^ SIGN_NEG,
- dest, deststnr, control_w);
-}
-
-static
-int add_sub_specials(FPU_REG const *a, u_char taga, u_char signa,
- FPU_REG const *b, u_char tagb, u_char signb,
- FPU_REG * dest, int deststnr, int control_w)
-{
- if (((taga == TW_Denormal) || (tagb == TW_Denormal))
- && (denormal_operand() < 0))
- return FPU_Exception;
-
- if (taga == TAG_Zero) {
- if (tagb == TAG_Zero) {
- /* Both are zero, result will be zero. */
- u_char different_signs = signa ^ signb;
-
- FPU_copy_to_regi(a, TAG_Zero, deststnr);
- if (different_signs) {
- /* Signs are different. */
- /* Sign of answer depends upon rounding mode. */
- setsign(dest, ((control_w & CW_RC) != RC_DOWN)
- ? SIGN_POS : SIGN_NEG);
- } else
- setsign(dest, signa); /* signa may differ from the sign of a. */
- return TAG_Zero;
- } else {
- reg_copy(b, dest);
- if ((tagb == TW_Denormal) && (b->sigh & 0x80000000)) {
- /* A pseudoDenormal, convert it. */
- addexponent(dest, 1);
- tagb = TAG_Valid;
- } else if (tagb > TAG_Empty)
- tagb = TAG_Special;
- setsign(dest, signb); /* signb may differ from the sign of b. */
- FPU_settagi(deststnr, tagb);
- return tagb;
- }
- } else if (tagb == TAG_Zero) {
- reg_copy(a, dest);
- if ((taga == TW_Denormal) && (a->sigh & 0x80000000)) {
- /* A pseudoDenormal */
- addexponent(dest, 1);
- taga = TAG_Valid;
- } else if (taga > TAG_Empty)
- taga = TAG_Special;
- setsign(dest, signa); /* signa may differ from the sign of a. */
- FPU_settagi(deststnr, taga);
- return taga;
- } else if (taga == TW_Infinity) {
- if ((tagb != TW_Infinity) || (signa == signb)) {
- FPU_copy_to_regi(a, TAG_Special, deststnr);
- setsign(dest, signa); /* signa may differ from the sign of a. */
- return taga;
- }
- /* Infinity-Infinity is undefined. */
- return arith_invalid(deststnr);
- } else if (tagb == TW_Infinity) {
- FPU_copy_to_regi(b, TAG_Special, deststnr);
- setsign(dest, signb); /* signb may differ from the sign of b. */
- return tagb;
- }
-#ifdef PARANOID
- EXCEPTION(EX_INTERNAL | 0x101);
-#endif
-
- return FPU_Exception;
-}
diff --git a/arch/x86/math-emu/reg_compare.c b/arch/x86/math-emu/reg_compare.c
deleted file mode 100644
index eacb5128fc09..000000000000
--- a/arch/x86/math-emu/reg_compare.c
+++ /dev/null
@@ -1,479 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | reg_compare.c |
- | |
- | Compare two floating point registers |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | compare() is the core FPU_REG comparison function |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_system.h"
-#include "exception.h"
-#include "fpu_emu.h"
-#include "control_w.h"
-#include "status_w.h"
-
-static int compare(FPU_REG const *b, int tagb)
-{
- int diff, exp0, expb;
- u_char st0_tag;
- FPU_REG *st0_ptr;
- FPU_REG x, y;
- u_char st0_sign, signb = getsign(b);
-
- st0_ptr = &st(0);
- st0_tag = FPU_gettag0();
- st0_sign = getsign(st0_ptr);
-
- if (tagb == TAG_Special)
- tagb = FPU_Special(b);
- if (st0_tag == TAG_Special)
- st0_tag = FPU_Special(st0_ptr);
-
- if (((st0_tag != TAG_Valid) && (st0_tag != TW_Denormal))
- || ((tagb != TAG_Valid) && (tagb != TW_Denormal))) {
- if (st0_tag == TAG_Zero) {
- if (tagb == TAG_Zero)
- return COMP_A_eq_B;
- if (tagb == TAG_Valid)
- return ((signb ==
- SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B);
- if (tagb == TW_Denormal)
- return ((signb ==
- SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B)
- | COMP_Denormal;
- } else if (tagb == TAG_Zero) {
- if (st0_tag == TAG_Valid)
- return ((st0_sign ==
- SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B);
- if (st0_tag == TW_Denormal)
- return ((st0_sign ==
- SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B)
- | COMP_Denormal;
- }
-
- if (st0_tag == TW_Infinity) {
- if ((tagb == TAG_Valid) || (tagb == TAG_Zero))
- return ((st0_sign ==
- SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B);
- else if (tagb == TW_Denormal)
- return ((st0_sign ==
- SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B)
- | COMP_Denormal;
- else if (tagb == TW_Infinity) {
- /* The 80486 book says that infinities can be equal! */
- return (st0_sign == signb) ? COMP_A_eq_B :
- ((st0_sign ==
- SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B);
- }
- /* Fall through to the NaN code */
- } else if (tagb == TW_Infinity) {
- if ((st0_tag == TAG_Valid) || (st0_tag == TAG_Zero))
- return ((signb ==
- SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B);
- if (st0_tag == TW_Denormal)
- return ((signb ==
- SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B)
- | COMP_Denormal;
- /* Fall through to the NaN code */
- }
-
- /* The only possibility now should be that one of the arguments
- is a NaN */
- if ((st0_tag == TW_NaN) || (tagb == TW_NaN)) {
- int signalling = 0, unsupported = 0;
- if (st0_tag == TW_NaN) {
- signalling =
- (st0_ptr->sigh & 0xc0000000) == 0x80000000;
- unsupported = !((exponent(st0_ptr) == EXP_OVER)
- && (st0_ptr->
- sigh & 0x80000000));
- }
- if (tagb == TW_NaN) {
- signalling |=
- (b->sigh & 0xc0000000) == 0x80000000;
- unsupported |= !((exponent(b) == EXP_OVER)
- && (b->sigh & 0x80000000));
- }
- if (signalling || unsupported)
- return COMP_No_Comp | COMP_SNaN | COMP_NaN;
- else
- /* Neither is a signaling NaN */
- return COMP_No_Comp | COMP_NaN;
- }
-
- EXCEPTION(EX_Invalid);
- }
-
- if (st0_sign != signb) {
- return ((st0_sign == SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B)
- | (((st0_tag == TW_Denormal) || (tagb == TW_Denormal)) ?
- COMP_Denormal : 0);
- }
-
- if ((st0_tag == TW_Denormal) || (tagb == TW_Denormal)) {
- FPU_to_exp16(st0_ptr, &x);
- FPU_to_exp16(b, &y);
- st0_ptr = &x;
- b = &y;
- exp0 = exponent16(st0_ptr);
- expb = exponent16(b);
- } else {
- exp0 = exponent(st0_ptr);
- expb = exponent(b);
- }
-
-#ifdef PARANOID
- if (!(st0_ptr->sigh & 0x80000000))
- EXCEPTION(EX_Invalid);
- if (!(b->sigh & 0x80000000))
- EXCEPTION(EX_Invalid);
-#endif /* PARANOID */
-
- diff = exp0 - expb;
- if (diff == 0) {
- diff = st0_ptr->sigh - b->sigh; /* Works only if ms bits are
- identical */
- if (diff == 0) {
- diff = st0_ptr->sigl > b->sigl;
- if (diff == 0)
- diff = -(st0_ptr->sigl < b->sigl);
- }
- }
-
- if (diff > 0) {
- return ((st0_sign == SIGN_POS) ? COMP_A_gt_B : COMP_A_lt_B)
- | (((st0_tag == TW_Denormal) || (tagb == TW_Denormal)) ?
- COMP_Denormal : 0);
- }
- if (diff < 0) {
- return ((st0_sign == SIGN_POS) ? COMP_A_lt_B : COMP_A_gt_B)
- | (((st0_tag == TW_Denormal) || (tagb == TW_Denormal)) ?
- COMP_Denormal : 0);
- }
-
- return COMP_A_eq_B
- | (((st0_tag == TW_Denormal) || (tagb == TW_Denormal)) ?
- COMP_Denormal : 0);
-
-}
-
-/* This function requires that st(0) is not empty */
-int FPU_compare_st_data(FPU_REG const *loaded_data, u_char loaded_tag)
-{
- int f, c;
-
- c = compare(loaded_data, loaded_tag);
-
- if (c & COMP_NaN) {
- EXCEPTION(EX_Invalid);
- f = SW_C3 | SW_C2 | SW_C0;
- } else
- switch (c & 7) {
- case COMP_A_lt_B:
- f = SW_C0;
- break;
- case COMP_A_eq_B:
- f = SW_C3;
- break;
- case COMP_A_gt_B:
- f = 0;
- break;
- case COMP_No_Comp:
- f = SW_C3 | SW_C2 | SW_C0;
- break;
- default:
-#ifdef PARANOID
- EXCEPTION(EX_INTERNAL | 0x121);
-#endif /* PARANOID */
- f = SW_C3 | SW_C2 | SW_C0;
- break;
- }
- setcc(f);
- if (c & COMP_Denormal) {
- return denormal_operand() < 0;
- }
- return 0;
-}
-
-static int compare_st_st(int nr)
-{
- int f, c;
- FPU_REG *st_ptr;
-
- if (!NOT_EMPTY(0) || !NOT_EMPTY(nr)) {
- setcc(SW_C3 | SW_C2 | SW_C0);
- /* Stack fault */
- EXCEPTION(EX_StackUnder);
- return !(control_word & CW_Invalid);
- }
-
- st_ptr = &st(nr);
- c = compare(st_ptr, FPU_gettagi(nr));
- if (c & COMP_NaN) {
- setcc(SW_C3 | SW_C2 | SW_C0);
- EXCEPTION(EX_Invalid);
- return !(control_word & CW_Invalid);
- } else
- switch (c & 7) {
- case COMP_A_lt_B:
- f = SW_C0;
- break;
- case COMP_A_eq_B:
- f = SW_C3;
- break;
- case COMP_A_gt_B:
- f = 0;
- break;
- case COMP_No_Comp:
- f = SW_C3 | SW_C2 | SW_C0;
- break;
- default:
-#ifdef PARANOID
- EXCEPTION(EX_INTERNAL | 0x122);
-#endif /* PARANOID */
- f = SW_C3 | SW_C2 | SW_C0;
- break;
- }
- setcc(f);
- if (c & COMP_Denormal) {
- return denormal_operand() < 0;
- }
- return 0;
-}
-
-static int compare_i_st_st(int nr)
-{
- int f, c;
- FPU_REG *st_ptr;
-
- if (!NOT_EMPTY(0) || !NOT_EMPTY(nr)) {
- FPU_EFLAGS |= (X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF);
- /* Stack fault */
- EXCEPTION(EX_StackUnder);
- return !(control_word & CW_Invalid);
- }
-
- partial_status &= ~SW_C0;
- st_ptr = &st(nr);
- c = compare(st_ptr, FPU_gettagi(nr));
- if (c & COMP_NaN) {
- FPU_EFLAGS |= (X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF);
- EXCEPTION(EX_Invalid);
- return !(control_word & CW_Invalid);
- }
-
- switch (c & 7) {
- case COMP_A_lt_B:
- f = X86_EFLAGS_CF;
- break;
- case COMP_A_eq_B:
- f = X86_EFLAGS_ZF;
- break;
- case COMP_A_gt_B:
- f = 0;
- break;
- case COMP_No_Comp:
- f = X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF;
- break;
- default:
-#ifdef PARANOID
- EXCEPTION(EX_INTERNAL | 0x122);
-#endif /* PARANOID */
- f = 0;
- break;
- }
- FPU_EFLAGS = (FPU_EFLAGS & ~(X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF)) | f;
- if (c & COMP_Denormal) {
- return denormal_operand() < 0;
- }
- return 0;
-}
-
-static int compare_u_st_st(int nr)
-{
- int f = 0, c;
- FPU_REG *st_ptr;
-
- if (!NOT_EMPTY(0) || !NOT_EMPTY(nr)) {
- setcc(SW_C3 | SW_C2 | SW_C0);
- /* Stack fault */
- EXCEPTION(EX_StackUnder);
- return !(control_word & CW_Invalid);
- }
-
- st_ptr = &st(nr);
- c = compare(st_ptr, FPU_gettagi(nr));
- if (c & COMP_NaN) {
- setcc(SW_C3 | SW_C2 | SW_C0);
- if (c & COMP_SNaN) { /* This is the only difference between
- un-ordered and ordinary comparisons */
- EXCEPTION(EX_Invalid);
- return !(control_word & CW_Invalid);
- }
- return 0;
- } else
- switch (c & 7) {
- case COMP_A_lt_B:
- f = SW_C0;
- break;
- case COMP_A_eq_B:
- f = SW_C3;
- break;
- case COMP_A_gt_B:
- f = 0;
- break;
- case COMP_No_Comp:
- f = SW_C3 | SW_C2 | SW_C0;
- break;
-#ifdef PARANOID
- default:
- EXCEPTION(EX_INTERNAL | 0x123);
- f = SW_C3 | SW_C2 | SW_C0;
- break;
-#endif /* PARANOID */
- }
- setcc(f);
- if (c & COMP_Denormal) {
- return denormal_operand() < 0;
- }
- return 0;
-}
-
-static int compare_ui_st_st(int nr)
-{
- int f = 0, c;
- FPU_REG *st_ptr;
-
- if (!NOT_EMPTY(0) || !NOT_EMPTY(nr)) {
- FPU_EFLAGS |= (X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF);
- /* Stack fault */
- EXCEPTION(EX_StackUnder);
- return !(control_word & CW_Invalid);
- }
-
- partial_status &= ~SW_C0;
- st_ptr = &st(nr);
- c = compare(st_ptr, FPU_gettagi(nr));
- if (c & COMP_NaN) {
- FPU_EFLAGS |= (X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF);
- if (c & COMP_SNaN) { /* This is the only difference between
- un-ordered and ordinary comparisons */
- EXCEPTION(EX_Invalid);
- return !(control_word & CW_Invalid);
- }
- return 0;
- }
-
- switch (c & 7) {
- case COMP_A_lt_B:
- f = X86_EFLAGS_CF;
- break;
- case COMP_A_eq_B:
- f = X86_EFLAGS_ZF;
- break;
- case COMP_A_gt_B:
- f = 0;
- break;
- case COMP_No_Comp:
- f = X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF;
- break;
-#ifdef PARANOID
- default:
- EXCEPTION(EX_INTERNAL | 0x123);
- f = 0;
- break;
-#endif /* PARANOID */
- }
- FPU_EFLAGS = (FPU_EFLAGS & ~(X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF)) | f;
- if (c & COMP_Denormal) {
- return denormal_operand() < 0;
- }
- return 0;
-}
-
-/*---------------------------------------------------------------------------*/
-
-void fcom_st(void)
-{
- /* fcom st(i) */
- compare_st_st(FPU_rm);
-}
-
-void fcompst(void)
-{
- /* fcomp st(i) */
- if (!compare_st_st(FPU_rm))
- FPU_pop();
-}
-
-void fcompp(void)
-{
- /* fcompp */
- if (FPU_rm != 1) {
- FPU_illegal();
- return;
- }
- if (!compare_st_st(1))
- poppop();
-}
-
-void fucom_(void)
-{
- /* fucom st(i) */
- compare_u_st_st(FPU_rm);
-
-}
-
-void fucomp(void)
-{
- /* fucomp st(i) */
- if (!compare_u_st_st(FPU_rm))
- FPU_pop();
-}
-
-void fucompp(void)
-{
- /* fucompp */
- if (FPU_rm == 1) {
- if (!compare_u_st_st(1))
- poppop();
- } else
- FPU_illegal();
-}
-
-/* P6+ compare-to-EFLAGS ops */
-
-void fcomi_(void)
-{
- /* fcomi st(i) */
- compare_i_st_st(FPU_rm);
-}
-
-void fcomip(void)
-{
- /* fcomip st(i) */
- if (!compare_i_st_st(FPU_rm))
- FPU_pop();
-}
-
-void fucomi_(void)
-{
- /* fucomi st(i) */
- compare_ui_st_st(FPU_rm);
-}
-
-void fucomip(void)
-{
- /* fucomip st(i) */
- if (!compare_ui_st_st(FPU_rm))
- FPU_pop();
-}
diff --git a/arch/x86/math-emu/reg_constant.c b/arch/x86/math-emu/reg_constant.c
deleted file mode 100644
index 003a0b2753e6..000000000000
--- a/arch/x86/math-emu/reg_constant.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | reg_constant.c |
- | |
- | All of the constant FPU_REGs |
- | |
- | Copyright (C) 1992,1993,1994,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_system.h"
-#include "fpu_emu.h"
-#include "status_w.h"
-#include "reg_constant.h"
-#include "control_w.h"
-
-#define MAKE_REG(s, e, l, h) { l, h, \
- (u16)((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
-
-FPU_REG const CONST_1 = MAKE_REG(POS, 0, 0x00000000, 0x80000000);
-#if 0
-FPU_REG const CONST_2 = MAKE_REG(POS, 1, 0x00000000, 0x80000000);
-FPU_REG const CONST_HALF = MAKE_REG(POS, -1, 0x00000000, 0x80000000);
-#endif /* 0 */
-static FPU_REG const CONST_L2T = MAKE_REG(POS, 1, 0xcd1b8afe, 0xd49a784b);
-static FPU_REG const CONST_L2E = MAKE_REG(POS, 0, 0x5c17f0bc, 0xb8aa3b29);
-FPU_REG const CONST_PI = MAKE_REG(POS, 1, 0x2168c235, 0xc90fdaa2);
-FPU_REG const CONST_PI2 = MAKE_REG(POS, 0, 0x2168c235, 0xc90fdaa2);
-FPU_REG const CONST_PI4 = MAKE_REG(POS, -1, 0x2168c235, 0xc90fdaa2);
-static FPU_REG const CONST_LG2 = MAKE_REG(POS, -2, 0xfbcff799, 0x9a209a84);
-static FPU_REG const CONST_LN2 = MAKE_REG(POS, -1, 0xd1cf79ac, 0xb17217f7);
-
-/* Extra bits to take pi/2 to more than 128 bits precision. */
-FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66,
- 0xfc8f8cbb, 0xece675d1);
-
-/* Only the sign (and tag) is used in internal zeroes */
-FPU_REG const CONST_Z = MAKE_REG(POS, EXP_UNDER, 0x0, 0x0);
-
-/* Only the sign and significand (and tag) are used in internal NaNs */
-/* The 80486 never generates one of these
-FPU_REG const CONST_SNAN = MAKE_REG(POS, EXP_OVER, 0x00000001, 0x80000000);
- */
-/* This is the real indefinite QNaN */
-FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000);
-
-/* Only the sign (and tag) is used in internal infinities */
-FPU_REG const CONST_INF = MAKE_REG(POS, EXP_OVER, 0x00000000, 0x80000000);
-
-static void fld_const(FPU_REG const * c, int adj, u_char tag)
-{
- FPU_REG *st_new_ptr;
-
- if (STACK_OVERFLOW) {
- FPU_stack_overflow();
- return;
- }
- push();
- reg_copy(c, st_new_ptr);
- st_new_ptr->sigl += adj; /* For all our fldxxx constants, we don't need to
- borrow or carry. */
- FPU_settag0(tag);
- clear_C1();
-}
-
-/* A fast way to find out whether x is one of RC_DOWN or RC_CHOP
- (and not one of RC_RND or RC_UP).
- */
-#define DOWN_OR_CHOP(x) (x & RC_DOWN)
-
-static void fld1(int rc)
-{
- fld_const(&CONST_1, 0, TAG_Valid);
-}
-
-static void fldl2t(int rc)
-{
- fld_const(&CONST_L2T, (rc == RC_UP) ? 1 : 0, TAG_Valid);
-}
-
-static void fldl2e(int rc)
-{
- fld_const(&CONST_L2E, DOWN_OR_CHOP(rc) ? -1 : 0, TAG_Valid);
-}
-
-static void fldpi(int rc)
-{
- fld_const(&CONST_PI, DOWN_OR_CHOP(rc) ? -1 : 0, TAG_Valid);
-}
-
-static void fldlg2(int rc)
-{
- fld_const(&CONST_LG2, DOWN_OR_CHOP(rc) ? -1 : 0, TAG_Valid);
-}
-
-static void fldln2(int rc)
-{
- fld_const(&CONST_LN2, DOWN_OR_CHOP(rc) ? -1 : 0, TAG_Valid);
-}
-
-static void fldz(int rc)
-{
- fld_const(&CONST_Z, 0, TAG_Zero);
-}
-
-typedef void (*FUNC_RC) (int);
-
-static void FPU_RC_illegal(int unused)
-{
- FPU_illegal();
-}
-
-static FUNC_RC constants_table[] = {
- fld1, fldl2t, fldl2e, fldpi, fldlg2, fldln2, fldz, FPU_RC_illegal
-};
-
-void fconst(void)
-{
- (constants_table[FPU_rm]) (control_word & CW_RC);
-}
diff --git a/arch/x86/math-emu/reg_constant.h b/arch/x86/math-emu/reg_constant.h
deleted file mode 100644
index f2fdd344dcaa..000000000000
--- a/arch/x86/math-emu/reg_constant.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | reg_constant.h |
- | |
- | Copyright (C) 1992 W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...c.cc.monash.edu.au |
- | |
- +---------------------------------------------------------------------------*/
-
-#ifndef _REG_CONSTANT_H_
-#define _REG_CONSTANT_H_
-
-#include "fpu_emu.h"
-
-extern FPU_REG const CONST_1;
-extern FPU_REG const CONST_PI;
-extern FPU_REG const CONST_PI2;
-extern FPU_REG const CONST_PI2extra;
-extern FPU_REG const CONST_PI4;
-extern FPU_REG const CONST_Z;
-extern FPU_REG const CONST_PINF;
-extern FPU_REG const CONST_INF;
-extern FPU_REG const CONST_MINF;
-extern FPU_REG const CONST_QNaN;
-
-#endif /* _REG_CONSTANT_H_ */
diff --git a/arch/x86/math-emu/reg_convert.c b/arch/x86/math-emu/reg_convert.c
deleted file mode 100644
index 251180623ce0..000000000000
--- a/arch/x86/math-emu/reg_convert.c
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | reg_convert.c |
- | |
- | Convert register representation. |
- | |
- | Copyright (C) 1992,1993,1994,1996,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "fpu_emu.h"
-
-int FPU_to_exp16(FPU_REG const *a, FPU_REG *x)
-{
- int sign = getsign(a);
-
- *(long long *)&(x->sigl) = *(const long long *)&(a->sigl);
-
- /* Set up the exponent as a 16 bit quantity. */
- setexponent16(x, exponent(a));
-
- if (exponent16(x) == EXP_UNDER) {
- /* The number is a de-normal or pseudodenormal. */
- /* We only deal with the significand and exponent. */
-
- if (x->sigh & 0x80000000) {
- /* Is a pseudodenormal. */
- /* This is non-80486 behaviour because the number
- loses its 'denormal' identity. */
- addexponent(x, 1);
- } else {
- /* Is a denormal. */
- addexponent(x, 1);
- FPU_normalize_nuo(x);
- }
- }
-
- if (!(x->sigh & 0x80000000)) {
- EXCEPTION(EX_INTERNAL | 0x180);
- }
-
- return sign;
-}
diff --git a/arch/x86/math-emu/reg_divide.c b/arch/x86/math-emu/reg_divide.c
deleted file mode 100644
index 08c2f6de0288..000000000000
--- a/arch/x86/math-emu/reg_divide.c
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | reg_divide.c |
- | |
- | Divide one FPU_REG by another and put the result in a destination FPU_REG.|
- | |
- | Copyright (C) 1996 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...obi.maths.monash.edu.au |
- | |
- | Return value is the tag of the answer, or-ed with FPU_Exception if |
- | one was raised, or -1 on internal error. |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | The destination may be any FPU_REG, including one of the source FPU_REGs. |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "reg_constant.h"
-#include "fpu_emu.h"
-#include "fpu_system.h"
-
-/*
- Divide one register by another and put the result into a third register.
- */
-int FPU_div(int flags, int rm, int control_w)
-{
- FPU_REG x, y;
- FPU_REG const *a, *b, *st0_ptr, *st_ptr;
- FPU_REG *dest;
- u_char taga, tagb, signa, signb, sign, saved_sign;
- int tag, deststnr;
-
- if (flags & DEST_RM)
- deststnr = rm;
- else
- deststnr = 0;
-
- if (flags & REV) {
- b = &st(0);
- st0_ptr = b;
- tagb = FPU_gettag0();
- if (flags & LOADED) {
- a = (FPU_REG *) rm;
- taga = flags & 0x0f;
- } else {
- a = &st(rm);
- st_ptr = a;
- taga = FPU_gettagi(rm);
- }
- } else {
- a = &st(0);
- st0_ptr = a;
- taga = FPU_gettag0();
- if (flags & LOADED) {
- b = (FPU_REG *) rm;
- tagb = flags & 0x0f;
- } else {
- b = &st(rm);
- st_ptr = b;
- tagb = FPU_gettagi(rm);
- }
- }
-
- signa = getsign(a);
- signb = getsign(b);
-
- sign = signa ^ signb;
-
- dest = &st(deststnr);
- saved_sign = getsign(dest);
-
- if (!(taga | tagb)) {
- /* Both regs Valid, this should be the most common case. */
- reg_copy(a, &x);
- reg_copy(b, &y);
- setpositive(&x);
- setpositive(&y);
- tag = FPU_u_div(&x, &y, dest, control_w, sign);
-
- if (tag < 0)
- return tag;
-
- FPU_settagi(deststnr, tag);
- return tag;
- }
-
- if (taga == TAG_Special)
- taga = FPU_Special(a);
- if (tagb == TAG_Special)
- tagb = FPU_Special(b);
-
- if (((taga == TAG_Valid) && (tagb == TW_Denormal))
- || ((taga == TW_Denormal) && (tagb == TAG_Valid))
- || ((taga == TW_Denormal) && (tagb == TW_Denormal))) {
- if (denormal_operand() < 0)
- return FPU_Exception;
-
- FPU_to_exp16(a, &x);
- FPU_to_exp16(b, &y);
- tag = FPU_u_div(&x, &y, dest, control_w, sign);
- if (tag < 0)
- return tag;
-
- FPU_settagi(deststnr, tag);
- return tag;
- } else if ((taga <= TW_Denormal) && (tagb <= TW_Denormal)) {
- if (tagb != TAG_Zero) {
- /* Want to find Zero/Valid */
- if (tagb == TW_Denormal) {
- if (denormal_operand() < 0)
- return FPU_Exception;
- }
-
- /* The result is zero. */
- FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
- setsign(dest, sign);
- return TAG_Zero;
- }
- /* We have an exception condition, either 0/0 or Valid/Zero. */
- if (taga == TAG_Zero) {
- /* 0/0 */
- return arith_invalid(deststnr);
- }
- /* Valid/Zero */
- return FPU_divide_by_zero(deststnr, sign);
- }
- /* Must have infinities, NaNs, etc */
- else if ((taga == TW_NaN) || (tagb == TW_NaN)) {
- if (flags & LOADED)
- return real_2op_NaN((FPU_REG *) rm, flags & 0x0f, 0,
- st0_ptr);
-
- if (flags & DEST_RM) {
- int tag;
- tag = FPU_gettag0();
- if (tag == TAG_Special)
- tag = FPU_Special(st0_ptr);
- return real_2op_NaN(st0_ptr, tag, rm,
- (flags & REV) ? st0_ptr : &st(rm));
- } else {
- int tag;
- tag = FPU_gettagi(rm);
- if (tag == TAG_Special)
- tag = FPU_Special(&st(rm));
- return real_2op_NaN(&st(rm), tag, 0,
- (flags & REV) ? st0_ptr : &st(rm));
- }
- } else if (taga == TW_Infinity) {
- if (tagb == TW_Infinity) {
- /* infinity/infinity */
- return arith_invalid(deststnr);
- } else {
- /* tagb must be Valid or Zero */
- if ((tagb == TW_Denormal) && (denormal_operand() < 0))
- return FPU_Exception;
-
- /* Infinity divided by Zero or Valid does
- not raise and exception, but returns Infinity */
- FPU_copy_to_regi(a, TAG_Special, deststnr);
- setsign(dest, sign);
- return taga;
- }
- } else if (tagb == TW_Infinity) {
- if ((taga == TW_Denormal) && (denormal_operand() < 0))
- return FPU_Exception;
-
- /* The result is zero. */
- FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
- setsign(dest, sign);
- return TAG_Zero;
- }
-#ifdef PARANOID
- else {
- EXCEPTION(EX_INTERNAL | 0x102);
- return FPU_Exception;
- }
-#endif /* PARANOID */
-
- return 0;
-}
diff --git a/arch/x86/math-emu/reg_ld_str.c b/arch/x86/math-emu/reg_ld_str.c
deleted file mode 100644
index 7e4521fbe7da..000000000000
--- a/arch/x86/math-emu/reg_ld_str.c
+++ /dev/null
@@ -1,1220 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | reg_ld_str.c |
- | |
- | All of the functions which transfer data between user memory and FPU_REGs.|
- | |
- | Copyright (C) 1992,1993,1994,1996,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | Note: |
- | The file contains code which accesses user memory. |
- | Emulator static data may change when user memory is accessed, due to |
- | other processes using the emulator while swapping is in progress. |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_emu.h"
-
-#include <linux/uaccess.h>
-
-#include "fpu_system.h"
-#include "exception.h"
-#include "reg_constant.h"
-#include "control_w.h"
-#include "status_w.h"
-
-#define DOUBLE_Emax 1023 /* largest valid exponent */
-#define DOUBLE_Ebias 1023
-#define DOUBLE_Emin (-1022) /* smallest valid exponent */
-
-#define SINGLE_Emax 127 /* largest valid exponent */
-#define SINGLE_Ebias 127
-#define SINGLE_Emin (-126) /* smallest valid exponent */
-
-static u_char normalize_no_excep(FPU_REG *r, int exp, int sign)
-{
- u_char tag;
-
- setexponent16(r, exp);
-
- tag = FPU_normalize_nuo(r);
- stdexp(r);
- if (sign)
- setnegative(r);
-
- return tag;
-}
-
-int FPU_tagof(FPU_REG *ptr)
-{
- int exp;
-
- exp = exponent16(ptr) & 0x7fff;
- if (exp == 0) {
- if (!(ptr->sigh | ptr->sigl)) {
- return TAG_Zero;
- }
- /* The number is a de-normal or pseudodenormal. */
- return TAG_Special;
- }
-
- if (exp == 0x7fff) {
- /* Is an Infinity, a NaN, or an unsupported data type. */
- return TAG_Special;
- }
-
- if (!(ptr->sigh & 0x80000000)) {
- /* Unsupported data type. */
- /* Valid numbers have the ms bit set to 1. */
- /* Unnormal. */
- return TAG_Special;
- }
-
- return TAG_Valid;
-}
-
-/* Get a long double from user memory */
-int FPU_load_extended(long double __user *s, int stnr)
-{
- FPU_REG *sti_ptr = &st(stnr);
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(s, 10);
- FPU_copy_from_user(sti_ptr, s, 10);
- RE_ENTRANT_CHECK_ON;
-
- return FPU_tagof(sti_ptr);
-}
-
-/* Get a double from user memory */
-int FPU_load_double(double __user *dfloat, FPU_REG *loaded_data)
-{
- int exp, tag, negative;
- unsigned m64, l64;
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(dfloat, 8);
- FPU_get_user(m64, 1 + (unsigned long __user *)dfloat);
- FPU_get_user(l64, (unsigned long __user *)dfloat);
- RE_ENTRANT_CHECK_ON;
-
- negative = (m64 & 0x80000000) ? SIGN_Negative : SIGN_Positive;
- exp = ((m64 & 0x7ff00000) >> 20) - DOUBLE_Ebias + EXTENDED_Ebias;
- m64 &= 0xfffff;
- if (exp > DOUBLE_Emax + EXTENDED_Ebias) {
- /* Infinity or NaN */
- if ((m64 == 0) && (l64 == 0)) {
- /* +- infinity */
- loaded_data->sigh = 0x80000000;
- loaded_data->sigl = 0x00000000;
- exp = EXP_Infinity + EXTENDED_Ebias;
- tag = TAG_Special;
- } else {
- /* Must be a signaling or quiet NaN */
- exp = EXP_NaN + EXTENDED_Ebias;
- loaded_data->sigh = (m64 << 11) | 0x80000000;
- loaded_data->sigh |= l64 >> 21;
- loaded_data->sigl = l64 << 11;
- tag = TAG_Special; /* The calling function must look for NaNs */
- }
- } else if (exp < DOUBLE_Emin + EXTENDED_Ebias) {
- /* Zero or de-normal */
- if ((m64 == 0) && (l64 == 0)) {
- /* Zero */
- reg_copy(&CONST_Z, loaded_data);
- exp = 0;
- tag = TAG_Zero;
- } else {
- /* De-normal */
- loaded_data->sigh = m64 << 11;
- loaded_data->sigh |= l64 >> 21;
- loaded_data->sigl = l64 << 11;
-
- return normalize_no_excep(loaded_data, DOUBLE_Emin,
- negative)
- | (denormal_operand() < 0 ? FPU_Exception : 0);
- }
- } else {
- loaded_data->sigh = (m64 << 11) | 0x80000000;
- loaded_data->sigh |= l64 >> 21;
- loaded_data->sigl = l64 << 11;
-
- tag = TAG_Valid;
- }
-
- setexponent16(loaded_data, exp | negative);
-
- return tag;
-}
-
-/* Get a float from user memory */
-int FPU_load_single(float __user *single, FPU_REG *loaded_data)
-{
- unsigned m32;
- int exp, tag, negative;
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(single, 4);
- FPU_get_user(m32, (unsigned long __user *)single);
- RE_ENTRANT_CHECK_ON;
-
- negative = (m32 & 0x80000000) ? SIGN_Negative : SIGN_Positive;
-
- if (!(m32 & 0x7fffffff)) {
- /* Zero */
- reg_copy(&CONST_Z, loaded_data);
- addexponent(loaded_data, negative);
- return TAG_Zero;
- }
- exp = ((m32 & 0x7f800000) >> 23) - SINGLE_Ebias + EXTENDED_Ebias;
- m32 = (m32 & 0x7fffff) << 8;
- if (exp < SINGLE_Emin + EXTENDED_Ebias) {
- /* De-normals */
- loaded_data->sigh = m32;
- loaded_data->sigl = 0;
-
- return normalize_no_excep(loaded_data, SINGLE_Emin, negative)
- | (denormal_operand() < 0 ? FPU_Exception : 0);
- } else if (exp > SINGLE_Emax + EXTENDED_Ebias) {
- /* Infinity or NaN */
- if (m32 == 0) {
- /* +- infinity */
- loaded_data->sigh = 0x80000000;
- loaded_data->sigl = 0x00000000;
- exp = EXP_Infinity + EXTENDED_Ebias;
- tag = TAG_Special;
- } else {
- /* Must be a signaling or quiet NaN */
- exp = EXP_NaN + EXTENDED_Ebias;
- loaded_data->sigh = m32 | 0x80000000;
- loaded_data->sigl = 0;
- tag = TAG_Special; /* The calling function must look for NaNs */
- }
- } else {
- loaded_data->sigh = m32 | 0x80000000;
- loaded_data->sigl = 0;
- tag = TAG_Valid;
- }
-
- setexponent16(loaded_data, exp | negative); /* Set the sign. */
-
- return tag;
-}
-
-/* Get a long long from user memory */
-int FPU_load_int64(long long __user *_s)
-{
- long long s;
- int sign;
- FPU_REG *st0_ptr = &st(0);
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(_s, 8);
- if (copy_from_user(&s, _s, 8))
- FPU_abort;
- RE_ENTRANT_CHECK_ON;
-
- if (s == 0) {
- reg_copy(&CONST_Z, st0_ptr);
- return TAG_Zero;
- }
-
- if (s > 0)
- sign = SIGN_Positive;
- else {
- s = -s;
- sign = SIGN_Negative;
- }
-
- significand(st0_ptr) = s;
-
- return normalize_no_excep(st0_ptr, 63, sign);
-}
-
-/* Get a long from user memory */
-int FPU_load_int32(long __user *_s, FPU_REG *loaded_data)
-{
- long s;
- int negative;
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(_s, 4);
- FPU_get_user(s, _s);
- RE_ENTRANT_CHECK_ON;
-
- if (s == 0) {
- reg_copy(&CONST_Z, loaded_data);
- return TAG_Zero;
- }
-
- if (s > 0)
- negative = SIGN_Positive;
- else {
- s = -s;
- negative = SIGN_Negative;
- }
-
- loaded_data->sigh = s;
- loaded_data->sigl = 0;
-
- return normalize_no_excep(loaded_data, 31, negative);
-}
-
-/* Get a short from user memory */
-int FPU_load_int16(short __user *_s, FPU_REG *loaded_data)
-{
- int s, negative;
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(_s, 2);
- /* Cast as short to get the sign extended. */
- FPU_get_user(s, _s);
- RE_ENTRANT_CHECK_ON;
-
- if (s == 0) {
- reg_copy(&CONST_Z, loaded_data);
- return TAG_Zero;
- }
-
- if (s > 0)
- negative = SIGN_Positive;
- else {
- s = -s;
- negative = SIGN_Negative;
- }
-
- loaded_data->sigh = s << 16;
- loaded_data->sigl = 0;
-
- return normalize_no_excep(loaded_data, 15, negative);
-}
-
-/* Get a packed bcd array from user memory */
-int FPU_load_bcd(u_char __user *s)
-{
- FPU_REG *st0_ptr = &st(0);
- int pos;
- u_char bcd;
- long long l = 0;
- int sign;
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(s, 10);
- RE_ENTRANT_CHECK_ON;
- for (pos = 8; pos >= 0; pos--) {
- l *= 10;
- RE_ENTRANT_CHECK_OFF;
- FPU_get_user(bcd, s + pos);
- RE_ENTRANT_CHECK_ON;
- l += bcd >> 4;
- l *= 10;
- l += bcd & 0x0f;
- }
-
- RE_ENTRANT_CHECK_OFF;
- FPU_get_user(sign, s + 9);
- sign = sign & 0x80 ? SIGN_Negative : SIGN_Positive;
- RE_ENTRANT_CHECK_ON;
-
- if (l == 0) {
- reg_copy(&CONST_Z, st0_ptr);
- addexponent(st0_ptr, sign); /* Set the sign. */
- return TAG_Zero;
- } else {
- significand(st0_ptr) = l;
- return normalize_no_excep(st0_ptr, 63, sign);
- }
-}
-
-/*===========================================================================*/
-
-/* Put a long double into user memory */
-int FPU_store_extended(FPU_REG *st0_ptr, u_char st0_tag,
- long double __user * d)
-{
- /*
- The only exception raised by an attempt to store to an
- extended format is the Invalid Stack exception, i.e.
- attempting to store from an empty register.
- */
-
- if (st0_tag != TAG_Empty) {
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 10);
-
- FPU_put_user(st0_ptr->sigl, (unsigned long __user *)d);
- FPU_put_user(st0_ptr->sigh,
- (unsigned long __user *)((u_char __user *) d + 4));
- FPU_put_user(exponent16(st0_ptr),
- (unsigned short __user *)((u_char __user *) d +
- 8));
- RE_ENTRANT_CHECK_ON;
-
- return 1;
- }
-
- /* Empty register (stack underflow) */
- EXCEPTION(EX_StackUnder);
- if (control_word & CW_Invalid) {
- /* The masked response */
- /* Put out the QNaN indefinite */
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 10);
- FPU_put_user(0, (unsigned long __user *)d);
- FPU_put_user(0xc0000000, 1 + (unsigned long __user *)d);
- FPU_put_user(0xffff, 4 + (short __user *)d);
- RE_ENTRANT_CHECK_ON;
- return 1;
- } else
- return 0;
-
-}
-
-/* Put a double into user memory */
-int FPU_store_double(FPU_REG *st0_ptr, u_char st0_tag, double __user *dfloat)
-{
- unsigned long l[2];
- unsigned long increment = 0; /* avoid gcc warnings */
- int precision_loss;
- int exp;
- FPU_REG tmp;
-
- l[0] = 0;
- l[1] = 0;
- if (st0_tag == TAG_Valid) {
- reg_copy(st0_ptr, &tmp);
- exp = exponent(&tmp);
-
- if (exp < DOUBLE_Emin) { /* It may be a denormal */
- addexponent(&tmp, -DOUBLE_Emin + 52); /* largest exp to be 51 */
-denormal_arg:
- if ((precision_loss = FPU_round_to_int(&tmp, st0_tag))) {
-#ifdef PECULIAR_486
- /* Did it round to a non-denormal ? */
- /* This behaviour might be regarded as peculiar, it appears
- that the 80486 rounds to the dest precision, then
- converts to decide underflow. */
- if (!
- ((tmp.sigh == 0x00100000) && (tmp.sigl == 0)
- && (st0_ptr->sigl & 0x000007ff)))
-#endif /* PECULIAR_486 */
- {
- EXCEPTION(EX_Underflow);
- /* This is a special case: see sec 16.2.5.1 of
- the 80486 book */
- if (!(control_word & CW_Underflow))
- return 0;
- }
- EXCEPTION(precision_loss);
- if (!(control_word & CW_Precision))
- return 0;
- }
- l[0] = tmp.sigl;
- l[1] = tmp.sigh;
- } else {
- if (tmp.sigl & 0x000007ff) {
- precision_loss = 1;
- switch (control_word & CW_RC) {
- case RC_RND:
- /* Rounding can get a little messy.. */
- increment = ((tmp.sigl & 0x7ff) > 0x400) | /* nearest */
- ((tmp.sigl & 0xc00) == 0xc00); /* odd -> even */
- break;
- case RC_DOWN: /* towards -infinity */
- increment =
- signpositive(&tmp) ? 0 : tmp.
- sigl & 0x7ff;
- break;
- case RC_UP: /* towards +infinity */
- increment =
- signpositive(&tmp) ? tmp.
- sigl & 0x7ff : 0;
- break;
- case RC_CHOP:
- increment = 0;
- break;
- }
-
- /* Truncate the mantissa */
- tmp.sigl &= 0xfffff800;
-
- if (increment) {
- if (tmp.sigl >= 0xfffff800) {
- /* the sigl part overflows */
- if (tmp.sigh == 0xffffffff) {
- /* The sigh part overflows */
- tmp.sigh = 0x80000000;
- exp++;
- if (exp >= EXP_OVER)
- goto overflow;
- } else {
- tmp.sigh++;
- }
- tmp.sigl = 0x00000000;
- } else {
- /* We only need to increment sigl */
- tmp.sigl += 0x00000800;
- }
- }
- } else
- precision_loss = 0;
-
- l[0] = (tmp.sigl >> 11) | (tmp.sigh << 21);
- l[1] = ((tmp.sigh >> 11) & 0xfffff);
-
- if (exp > DOUBLE_Emax) {
- overflow:
- EXCEPTION(EX_Overflow);
- if (!(control_word & CW_Overflow))
- return 0;
- set_precision_flag_up();
- if (!(control_word & CW_Precision))
- return 0;
-
- /* This is a special case: see sec 16.2.5.1 of the 80486 book */
- /* Overflow to infinity */
- l[1] = 0x7ff00000; /* Set to + INF */
- } else {
- if (precision_loss) {
- if (increment)
- set_precision_flag_up();
- else
- set_precision_flag_down();
- }
- /* Add the exponent */
- l[1] |= (((exp + DOUBLE_Ebias) & 0x7ff) << 20);
- }
- }
- } else if (st0_tag == TAG_Zero) {
- /* Number is zero */
- } else if (st0_tag == TAG_Special) {
- st0_tag = FPU_Special(st0_ptr);
- if (st0_tag == TW_Denormal) {
- /* A denormal will always underflow. */
-#ifndef PECULIAR_486
- /* An 80486 is supposed to be able to generate
- a denormal exception here, but... */
- /* Underflow has priority. */
- if (control_word & CW_Underflow)
- denormal_operand();
-#endif /* PECULIAR_486 */
- reg_copy(st0_ptr, &tmp);
- goto denormal_arg;
- } else if (st0_tag == TW_Infinity) {
- l[1] = 0x7ff00000;
- } else if (st0_tag == TW_NaN) {
- /* Is it really a NaN ? */
- if ((exponent(st0_ptr) == EXP_OVER)
- && (st0_ptr->sigh & 0x80000000)) {
- /* See if we can get a valid NaN from the FPU_REG */
- l[0] =
- (st0_ptr->sigl >> 11) | (st0_ptr->
- sigh << 21);
- l[1] = ((st0_ptr->sigh >> 11) & 0xfffff);
- if (!(st0_ptr->sigh & 0x40000000)) {
- /* It is a signalling NaN */
- EXCEPTION(EX_Invalid);
- if (!(control_word & CW_Invalid))
- return 0;
- l[1] |= (0x40000000 >> 11);
- }
- l[1] |= 0x7ff00000;
- } else {
- /* It is an unsupported data type */
- EXCEPTION(EX_Invalid);
- if (!(control_word & CW_Invalid))
- return 0;
- l[1] = 0xfff80000;
- }
- }
- } else if (st0_tag == TAG_Empty) {
- /* Empty register (stack underflow) */
- EXCEPTION(EX_StackUnder);
- if (control_word & CW_Invalid) {
- /* The masked response */
- /* Put out the QNaN indefinite */
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(dfloat, 8);
- FPU_put_user(0, (unsigned long __user *)dfloat);
- FPU_put_user(0xfff80000,
- 1 + (unsigned long __user *)dfloat);
- RE_ENTRANT_CHECK_ON;
- return 1;
- } else
- return 0;
- }
- if (getsign(st0_ptr))
- l[1] |= 0x80000000;
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(dfloat, 8);
- FPU_put_user(l[0], (unsigned long __user *)dfloat);
- FPU_put_user(l[1], 1 + (unsigned long __user *)dfloat);
- RE_ENTRANT_CHECK_ON;
-
- return 1;
-}
-
-/* Put a float into user memory */
-int FPU_store_single(FPU_REG *st0_ptr, u_char st0_tag, float __user *single)
-{
- long templ = 0;
- unsigned long increment = 0; /* avoid gcc warnings */
- int precision_loss;
- int exp;
- FPU_REG tmp;
-
- if (st0_tag == TAG_Valid) {
-
- reg_copy(st0_ptr, &tmp);
- exp = exponent(&tmp);
-
- if (exp < SINGLE_Emin) {
- addexponent(&tmp, -SINGLE_Emin + 23); /* largest exp to be 22 */
-
- denormal_arg:
-
- if ((precision_loss = FPU_round_to_int(&tmp, st0_tag))) {
-#ifdef PECULIAR_486
- /* Did it round to a non-denormal ? */
- /* This behaviour might be regarded as peculiar, it appears
- that the 80486 rounds to the dest precision, then
- converts to decide underflow. */
- if (!((tmp.sigl == 0x00800000) &&
- ((st0_ptr->sigh & 0x000000ff)
- || st0_ptr->sigl)))
-#endif /* PECULIAR_486 */
- {
- EXCEPTION(EX_Underflow);
- /* This is a special case: see sec 16.2.5.1 of
- the 80486 book */
- if (!(control_word & CW_Underflow))
- return 0;
- }
- EXCEPTION(precision_loss);
- if (!(control_word & CW_Precision))
- return 0;
- }
- templ = tmp.sigl;
- } else {
- if (tmp.sigl | (tmp.sigh & 0x000000ff)) {
- unsigned long sigh = tmp.sigh;
- unsigned long sigl = tmp.sigl;
-
- precision_loss = 1;
- switch (control_word & CW_RC) {
- case RC_RND:
- increment = ((sigh & 0xff) > 0x80) /* more than half */
- ||(((sigh & 0xff) == 0x80) && sigl) /* more than half */
- ||((sigh & 0x180) == 0x180); /* round to even */
- break;
- case RC_DOWN: /* towards -infinity */
- increment = signpositive(&tmp)
- ? 0 : (sigl | (sigh & 0xff));
- break;
- case RC_UP: /* towards +infinity */
- increment = signpositive(&tmp)
- ? (sigl | (sigh & 0xff)) : 0;
- break;
- case RC_CHOP:
- increment = 0;
- break;
- }
-
- /* Truncate part of the mantissa */
- tmp.sigl = 0;
-
- if (increment) {
- if (sigh >= 0xffffff00) {
- /* The sigh part overflows */
- tmp.sigh = 0x80000000;
- exp++;
- if (exp >= EXP_OVER)
- goto overflow;
- } else {
- tmp.sigh &= 0xffffff00;
- tmp.sigh += 0x100;
- }
- } else {
- tmp.sigh &= 0xffffff00; /* Finish the truncation */
- }
- } else
- precision_loss = 0;
-
- templ = (tmp.sigh >> 8) & 0x007fffff;
-
- if (exp > SINGLE_Emax) {
- overflow:
- EXCEPTION(EX_Overflow);
- if (!(control_word & CW_Overflow))
- return 0;
- set_precision_flag_up();
- if (!(control_word & CW_Precision))
- return 0;
-
- /* This is a special case: see sec 16.2.5.1 of the 80486 book. */
- /* Masked response is overflow to infinity. */
- templ = 0x7f800000;
- } else {
- if (precision_loss) {
- if (increment)
- set_precision_flag_up();
- else
- set_precision_flag_down();
- }
- /* Add the exponent */
- templ |= ((exp + SINGLE_Ebias) & 0xff) << 23;
- }
- }
- } else if (st0_tag == TAG_Zero) {
- templ = 0;
- } else if (st0_tag == TAG_Special) {
- st0_tag = FPU_Special(st0_ptr);
- if (st0_tag == TW_Denormal) {
- reg_copy(st0_ptr, &tmp);
-
- /* A denormal will always underflow. */
-#ifndef PECULIAR_486
- /* An 80486 is supposed to be able to generate
- a denormal exception here, but... */
- /* Underflow has priority. */
- if (control_word & CW_Underflow)
- denormal_operand();
-#endif /* PECULIAR_486 */
- goto denormal_arg;
- } else if (st0_tag == TW_Infinity) {
- templ = 0x7f800000;
- } else if (st0_tag == TW_NaN) {
- /* Is it really a NaN ? */
- if ((exponent(st0_ptr) == EXP_OVER)
- && (st0_ptr->sigh & 0x80000000)) {
- /* See if we can get a valid NaN from the FPU_REG */
- templ = st0_ptr->sigh >> 8;
- if (!(st0_ptr->sigh & 0x40000000)) {
- /* It is a signalling NaN */
- EXCEPTION(EX_Invalid);
- if (!(control_word & CW_Invalid))
- return 0;
- templ |= (0x40000000 >> 8);
- }
- templ |= 0x7f800000;
- } else {
- /* It is an unsupported data type */
- EXCEPTION(EX_Invalid);
- if (!(control_word & CW_Invalid))
- return 0;
- templ = 0xffc00000;
- }
- }
-#ifdef PARANOID
- else {
- EXCEPTION(EX_INTERNAL | 0x164);
- return 0;
- }
-#endif
- } else if (st0_tag == TAG_Empty) {
- /* Empty register (stack underflow) */
- EXCEPTION(EX_StackUnder);
- if (control_word & EX_Invalid) {
- /* The masked response */
- /* Put out the QNaN indefinite */
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(single, 4);
- FPU_put_user(0xffc00000,
- (unsigned long __user *)single);
- RE_ENTRANT_CHECK_ON;
- return 1;
- } else
- return 0;
- }
-#ifdef PARANOID
- else {
- EXCEPTION(EX_INTERNAL | 0x163);
- return 0;
- }
-#endif
- if (getsign(st0_ptr))
- templ |= 0x80000000;
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(single, 4);
- FPU_put_user(templ, (unsigned long __user *)single);
- RE_ENTRANT_CHECK_ON;
-
- return 1;
-}
-
-/* Put a long long into user memory */
-int FPU_store_int64(FPU_REG *st0_ptr, u_char st0_tag, long long __user *d)
-{
- FPU_REG t;
- long long tll;
- int precision_loss;
-
- if (st0_tag == TAG_Empty) {
- /* Empty register (stack underflow) */
- EXCEPTION(EX_StackUnder);
- goto invalid_operand;
- } else if (st0_tag == TAG_Special) {
- st0_tag = FPU_Special(st0_ptr);
- if ((st0_tag == TW_Infinity) || (st0_tag == TW_NaN)) {
- EXCEPTION(EX_Invalid);
- goto invalid_operand;
- }
- }
-
- reg_copy(st0_ptr, &t);
- precision_loss = FPU_round_to_int(&t, st0_tag);
- ((long *)&tll)[0] = t.sigl;
- ((long *)&tll)[1] = t.sigh;
- if ((precision_loss == 1) ||
- ((t.sigh & 0x80000000) &&
- !((t.sigh == 0x80000000) && (t.sigl == 0) && signnegative(&t)))) {
- EXCEPTION(EX_Invalid);
- /* This is a special case: see sec 16.2.5.1 of the 80486 book */
- invalid_operand:
- if (control_word & EX_Invalid) {
- /* Produce something like QNaN "indefinite" */
- tll = 0x8000000000000000LL;
- } else
- return 0;
- } else {
- if (precision_loss)
- set_precision_flag(precision_loss);
- if (signnegative(&t))
- tll = -tll;
- }
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 8);
- if (copy_to_user(d, &tll, 8))
- FPU_abort;
- RE_ENTRANT_CHECK_ON;
-
- return 1;
-}
-
-/* Put a long into user memory */
-int FPU_store_int32(FPU_REG *st0_ptr, u_char st0_tag, long __user *d)
-{
- FPU_REG t;
- int precision_loss;
-
- if (st0_tag == TAG_Empty) {
- /* Empty register (stack underflow) */
- EXCEPTION(EX_StackUnder);
- goto invalid_operand;
- } else if (st0_tag == TAG_Special) {
- st0_tag = FPU_Special(st0_ptr);
- if ((st0_tag == TW_Infinity) || (st0_tag == TW_NaN)) {
- EXCEPTION(EX_Invalid);
- goto invalid_operand;
- }
- }
-
- reg_copy(st0_ptr, &t);
- precision_loss = FPU_round_to_int(&t, st0_tag);
- if (t.sigh ||
- ((t.sigl & 0x80000000) &&
- !((t.sigl == 0x80000000) && signnegative(&t)))) {
- EXCEPTION(EX_Invalid);
- /* This is a special case: see sec 16.2.5.1 of the 80486 book */
- invalid_operand:
- if (control_word & EX_Invalid) {
- /* Produce something like QNaN "indefinite" */
- t.sigl = 0x80000000;
- } else
- return 0;
- } else {
- if (precision_loss)
- set_precision_flag(precision_loss);
- if (signnegative(&t))
- t.sigl = -(long)t.sigl;
- }
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 4);
- FPU_put_user(t.sigl, (unsigned long __user *)d);
- RE_ENTRANT_CHECK_ON;
-
- return 1;
-}
-
-/* Put a short into user memory */
-int FPU_store_int16(FPU_REG *st0_ptr, u_char st0_tag, short __user *d)
-{
- FPU_REG t;
- int precision_loss;
-
- if (st0_tag == TAG_Empty) {
- /* Empty register (stack underflow) */
- EXCEPTION(EX_StackUnder);
- goto invalid_operand;
- } else if (st0_tag == TAG_Special) {
- st0_tag = FPU_Special(st0_ptr);
- if ((st0_tag == TW_Infinity) || (st0_tag == TW_NaN)) {
- EXCEPTION(EX_Invalid);
- goto invalid_operand;
- }
- }
-
- reg_copy(st0_ptr, &t);
- precision_loss = FPU_round_to_int(&t, st0_tag);
- if (t.sigh ||
- ((t.sigl & 0xffff8000) &&
- !((t.sigl == 0x8000) && signnegative(&t)))) {
- EXCEPTION(EX_Invalid);
- /* This is a special case: see sec 16.2.5.1 of the 80486 book */
- invalid_operand:
- if (control_word & EX_Invalid) {
- /* Produce something like QNaN "indefinite" */
- t.sigl = 0x8000;
- } else
- return 0;
- } else {
- if (precision_loss)
- set_precision_flag(precision_loss);
- if (signnegative(&t))
- t.sigl = -t.sigl;
- }
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 2);
- FPU_put_user((short)t.sigl, d);
- RE_ENTRANT_CHECK_ON;
-
- return 1;
-}
-
-/* Put a packed bcd array into user memory */
-int FPU_store_bcd(FPU_REG *st0_ptr, u_char st0_tag, u_char __user *d)
-{
- FPU_REG t;
- unsigned long long ll;
- u_char b;
- int i, precision_loss;
- u_char sign = (getsign(st0_ptr) == SIGN_NEG) ? 0x80 : 0;
-
- if (st0_tag == TAG_Empty) {
- /* Empty register (stack underflow) */
- EXCEPTION(EX_StackUnder);
- goto invalid_operand;
- } else if (st0_tag == TAG_Special) {
- st0_tag = FPU_Special(st0_ptr);
- if ((st0_tag == TW_Infinity) || (st0_tag == TW_NaN)) {
- EXCEPTION(EX_Invalid);
- goto invalid_operand;
- }
- }
-
- reg_copy(st0_ptr, &t);
- precision_loss = FPU_round_to_int(&t, st0_tag);
- ll = significand(&t);
-
- /* Check for overflow, by comparing with 999999999999999999 decimal. */
- if ((t.sigh > 0x0de0b6b3) ||
- ((t.sigh == 0x0de0b6b3) && (t.sigl > 0xa763ffff))) {
- EXCEPTION(EX_Invalid);
- /* This is a special case: see sec 16.2.5.1 of the 80486 book */
- invalid_operand:
- if (control_word & CW_Invalid) {
- /* Produce the QNaN "indefinite" */
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 10);
- for (i = 0; i < 7; i++)
- FPU_put_user(0, d + i); /* These bytes "undefined" */
- FPU_put_user(0xc0, d + 7); /* This byte "undefined" */
- FPU_put_user(0xff, d + 8);
- FPU_put_user(0xff, d + 9);
- RE_ENTRANT_CHECK_ON;
- return 1;
- } else
- return 0;
- } else if (precision_loss) {
- /* Precision loss doesn't stop the data transfer */
- set_precision_flag(precision_loss);
- }
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 10);
- RE_ENTRANT_CHECK_ON;
- for (i = 0; i < 9; i++) {
- b = FPU_div_small(&ll, 10);
- b |= (FPU_div_small(&ll, 10)) << 4;
- RE_ENTRANT_CHECK_OFF;
- FPU_put_user(b, d + i);
- RE_ENTRANT_CHECK_ON;
- }
- RE_ENTRANT_CHECK_OFF;
- FPU_put_user(sign, d + 9);
- RE_ENTRANT_CHECK_ON;
-
- return 1;
-}
-
-/*===========================================================================*/
-
-/* r gets mangled such that sig is int, sign:
- it is NOT normalized */
-/* The return value (in eax) is zero if the result is exact,
- if bits are changed due to rounding, truncation, etc, then
- a non-zero value is returned */
-/* Overflow is signaled by a non-zero return value (in eax).
- In the case of overflow, the returned significand always has the
- largest possible value */
-int FPU_round_to_int(FPU_REG *r, u_char tag)
-{
- u_char very_big;
- unsigned eax;
-
- if (tag == TAG_Zero) {
- /* Make sure that zero is returned */
- significand(r) = 0;
- return 0; /* o.k. */
- }
-
- if (exponent(r) > 63) {
- r->sigl = r->sigh = ~0; /* The largest representable number */
- return 1; /* overflow */
- }
-
- eax = FPU_shrxs(&r->sigl, 63 - exponent(r));
- very_big = !(~(r->sigh) | ~(r->sigl)); /* test for 0xfff...fff */
-#define half_or_more (eax & 0x80000000)
-#define frac_part (eax)
-#define more_than_half ((eax & 0x80000001) == 0x80000001)
- switch (control_word & CW_RC) {
- case RC_RND:
- if (more_than_half /* nearest */
- || (half_or_more && (r->sigl & 1))) { /* odd -> even */
- if (very_big)
- return 1; /* overflow */
- significand(r)++;
- return PRECISION_LOST_UP;
- }
- break;
- case RC_DOWN:
- if (frac_part && getsign(r)) {
- if (very_big)
- return 1; /* overflow */
- significand(r)++;
- return PRECISION_LOST_UP;
- }
- break;
- case RC_UP:
- if (frac_part && !getsign(r)) {
- if (very_big)
- return 1; /* overflow */
- significand(r)++;
- return PRECISION_LOST_UP;
- }
- break;
- case RC_CHOP:
- break;
- }
-
- return eax ? PRECISION_LOST_DOWN : 0;
-
-}
-
-/*===========================================================================*/
-
-u_char __user *fldenv(fpu_addr_modes addr_modes, u_char __user *s)
-{
- unsigned short tag_word = 0;
- u_char tag;
- int i;
-
- if ((addr_modes.default_mode == VM86) ||
- ((addr_modes.default_mode == PM16)
- ^ (addr_modes.override.operand_size == OP_SIZE_PREFIX))) {
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(s, 0x0e);
- FPU_get_user(control_word, (unsigned short __user *)s);
- FPU_get_user(partial_status, (unsigned short __user *)(s + 2));
- FPU_get_user(tag_word, (unsigned short __user *)(s + 4));
- FPU_get_user(instruction_address.offset,
- (unsigned short __user *)(s + 6));
- FPU_get_user(instruction_address.selector,
- (unsigned short __user *)(s + 8));
- FPU_get_user(operand_address.offset,
- (unsigned short __user *)(s + 0x0a));
- FPU_get_user(operand_address.selector,
- (unsigned short __user *)(s + 0x0c));
- RE_ENTRANT_CHECK_ON;
- s += 0x0e;
- if (addr_modes.default_mode == VM86) {
- instruction_address.offset
- += (instruction_address.selector & 0xf000) << 4;
- operand_address.offset +=
- (operand_address.selector & 0xf000) << 4;
- }
- } else {
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(s, 0x1c);
- FPU_get_user(control_word, (unsigned short __user *)s);
- FPU_get_user(partial_status, (unsigned short __user *)(s + 4));
- FPU_get_user(tag_word, (unsigned short __user *)(s + 8));
- FPU_get_user(instruction_address.offset,
- (unsigned long __user *)(s + 0x0c));
- FPU_get_user(instruction_address.selector,
- (unsigned short __user *)(s + 0x10));
- FPU_get_user(instruction_address.opcode,
- (unsigned short __user *)(s + 0x12));
- FPU_get_user(operand_address.offset,
- (unsigned long __user *)(s + 0x14));
- FPU_get_user(operand_address.selector,
- (unsigned long __user *)(s + 0x18));
- RE_ENTRANT_CHECK_ON;
- s += 0x1c;
- }
-
-#ifdef PECULIAR_486
- control_word &= ~0xe080;
-#endif /* PECULIAR_486 */
-
- top = (partial_status >> SW_Top_Shift) & 7;
-
- if (partial_status & ~control_word & CW_Exceptions)
- partial_status |= (SW_Summary | SW_Backward);
- else
- partial_status &= ~(SW_Summary | SW_Backward);
-
- for (i = 0; i < 8; i++) {
- tag = tag_word & 3;
- tag_word >>= 2;
-
- if (tag == TAG_Empty)
- /* New tag is empty. Accept it */
- FPU_settag(i, TAG_Empty);
- else if (FPU_gettag(i) == TAG_Empty) {
- /* Old tag is empty and new tag is not empty. New tag is determined
- by old reg contents */
- if (exponent(&fpu_register(i)) == -EXTENDED_Ebias) {
- if (!
- (fpu_register(i).sigl | fpu_register(i).
- sigh))
- FPU_settag(i, TAG_Zero);
- else
- FPU_settag(i, TAG_Special);
- } else if (exponent(&fpu_register(i)) ==
- 0x7fff - EXTENDED_Ebias) {
- FPU_settag(i, TAG_Special);
- } else if (fpu_register(i).sigh & 0x80000000)
- FPU_settag(i, TAG_Valid);
- else
- FPU_settag(i, TAG_Special); /* An Un-normal */
- }
- /* Else old tag is not empty and new tag is not empty. Old tag
- remains correct */
- }
-
- return s;
-}
-
-void FPU_frstor(fpu_addr_modes addr_modes, u_char __user *data_address)
-{
- int i, regnr;
- u_char __user *s = fldenv(addr_modes, data_address);
- int offset = (top & 7) * 10, other = 80 - offset;
-
- /* Copy all registers in stack order. */
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(s, 80);
- FPU_copy_from_user(register_base + offset, s, other);
- if (offset)
- FPU_copy_from_user(register_base, s + other, offset);
- RE_ENTRANT_CHECK_ON;
-
- for (i = 0; i < 8; i++) {
- regnr = (i + top) & 7;
- if (FPU_gettag(regnr) != TAG_Empty)
- /* The loaded data over-rides all other cases. */
- FPU_settag(regnr, FPU_tagof(&st(i)));
- }
-
-}
-
-u_char __user *fstenv(fpu_addr_modes addr_modes, u_char __user *d)
-{
- if ((addr_modes.default_mode == VM86) ||
- ((addr_modes.default_mode == PM16)
- ^ (addr_modes.override.operand_size == OP_SIZE_PREFIX))) {
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 14);
-#ifdef PECULIAR_486
- FPU_put_user(control_word & ~0xe080, (unsigned long __user *)d);
-#else
- FPU_put_user(control_word, (unsigned short __user *)d);
-#endif /* PECULIAR_486 */
- FPU_put_user(status_word(), (unsigned short __user *)(d + 2));
- FPU_put_user(fpu_tag_word, (unsigned short __user *)(d + 4));
- FPU_put_user(instruction_address.offset,
- (unsigned short __user *)(d + 6));
- FPU_put_user(operand_address.offset,
- (unsigned short __user *)(d + 0x0a));
- if (addr_modes.default_mode == VM86) {
- FPU_put_user((instruction_address.
- offset & 0xf0000) >> 4,
- (unsigned short __user *)(d + 8));
- FPU_put_user((operand_address.offset & 0xf0000) >> 4,
- (unsigned short __user *)(d + 0x0c));
- } else {
- FPU_put_user(instruction_address.selector,
- (unsigned short __user *)(d + 8));
- FPU_put_user(operand_address.selector,
- (unsigned short __user *)(d + 0x0c));
- }
- RE_ENTRANT_CHECK_ON;
- d += 0x0e;
- } else {
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 7 * 4);
-#ifdef PECULIAR_486
- control_word &= ~0xe080;
- /* An 80486 sets nearly all of the reserved bits to 1. */
- control_word |= 0xffff0040;
- partial_status = status_word() | 0xffff0000;
- fpu_tag_word |= 0xffff0000;
- I387->soft.fcs &= ~0xf8000000;
- I387->soft.fos |= 0xffff0000;
-#endif /* PECULIAR_486 */
- if (__copy_to_user(d, &control_word, 7 * 4))
- FPU_abort;
- RE_ENTRANT_CHECK_ON;
- d += 0x1c;
- }
-
- control_word |= CW_Exceptions;
- partial_status &= ~(SW_Summary | SW_Backward);
-
- return d;
-}
-
-void fsave(fpu_addr_modes addr_modes, u_char __user *data_address)
-{
- u_char __user *d;
- int offset = (top & 7) * 10, other = 80 - offset;
-
- d = fstenv(addr_modes, data_address);
-
- RE_ENTRANT_CHECK_OFF;
- FPU_access_ok(d, 80);
-
- /* Copy all registers in stack order. */
- if (__copy_to_user(d, register_base + offset, other))
- FPU_abort;
- if (offset)
- if (__copy_to_user(d + other, register_base, offset))
- FPU_abort;
- RE_ENTRANT_CHECK_ON;
-
- finit();
-}
-
-/*===========================================================================*/
diff --git a/arch/x86/math-emu/reg_mul.c b/arch/x86/math-emu/reg_mul.c
deleted file mode 100644
index d69618572f14..000000000000
--- a/arch/x86/math-emu/reg_mul.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*---------------------------------------------------------------------------+
- | reg_mul.c |
- | |
- | Multiply one FPU_REG by another, put the result in a destination FPU_REG. |
- | |
- | Copyright (C) 1992,1993,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | Returns the tag of the result if no exceptions or errors occurred. |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | The destination may be any FPU_REG, including one of the source FPU_REGs. |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_emu.h"
-#include "exception.h"
-#include "reg_constant.h"
-#include "fpu_system.h"
-
-/*
- Multiply two registers to give a register result.
- The sources are st(deststnr) and (b,tagb,signb).
- The destination is st(deststnr).
- */
-/* This routine must be called with non-empty source registers */
-int FPU_mul(FPU_REG const *b, u_char tagb, int deststnr, int control_w)
-{
- FPU_REG *a = &st(deststnr);
- FPU_REG *dest = a;
- u_char taga = FPU_gettagi(deststnr);
- u_char saved_sign = getsign(dest);
- u_char sign = (getsign(a) ^ getsign(b));
- int tag;
-
- if (!(taga | tagb)) {
- /* Both regs Valid, this should be the most common case. */
-
- tag =
- FPU_u_mul(a, b, dest, control_w, sign,
- exponent(a) + exponent(b));
- if (tag < 0) {
- setsign(dest, saved_sign);
- return tag;
- }
- FPU_settagi(deststnr, tag);
- return tag;
- }
-
- if (taga == TAG_Special)
- taga = FPU_Special(a);
- if (tagb == TAG_Special)
- tagb = FPU_Special(b);
-
- if (((taga == TAG_Valid) && (tagb == TW_Denormal))
- || ((taga == TW_Denormal) && (tagb == TAG_Valid))
- || ((taga == TW_Denormal) && (tagb == TW_Denormal))) {
- FPU_REG x, y;
- if (denormal_operand() < 0)
- return FPU_Exception;
-
- FPU_to_exp16(a, &x);
- FPU_to_exp16(b, &y);
- tag = FPU_u_mul(&x, &y, dest, control_w, sign,
- exponent16(&x) + exponent16(&y));
- if (tag < 0) {
- setsign(dest, saved_sign);
- return tag;
- }
- FPU_settagi(deststnr, tag);
- return tag;
- } else if ((taga <= TW_Denormal) && (tagb <= TW_Denormal)) {
- if (((tagb == TW_Denormal) || (taga == TW_Denormal))
- && (denormal_operand() < 0))
- return FPU_Exception;
-
- /* Must have either both arguments == zero, or
- one valid and the other zero.
- The result is therefore zero. */
- FPU_copy_to_regi(&CONST_Z, TAG_Zero, deststnr);
- /* The 80486 book says that the answer is +0, but a real
- 80486 behaves this way.
- IEEE-754 apparently says it should be this way. */
- setsign(dest, sign);
- return TAG_Zero;
- }
- /* Must have infinities, NaNs, etc */
- else if ((taga == TW_NaN) || (tagb == TW_NaN)) {
- return real_2op_NaN(b, tagb, deststnr, &st(0));
- } else if (((taga == TW_Infinity) && (tagb == TAG_Zero))
- || ((tagb == TW_Infinity) && (taga == TAG_Zero))) {
- return arith_invalid(deststnr); /* Zero*Infinity is invalid */
- } else if (((taga == TW_Denormal) || (tagb == TW_Denormal))
- && (denormal_operand() < 0)) {
- return FPU_Exception;
- } else if (taga == TW_Infinity) {
- FPU_copy_to_regi(a, TAG_Special, deststnr);
- setsign(dest, sign);
- return TAG_Special;
- } else if (tagb == TW_Infinity) {
- FPU_copy_to_regi(b, TAG_Special, deststnr);
- setsign(dest, sign);
- return TAG_Special;
- }
-#ifdef PARANOID
- else {
- EXCEPTION(EX_INTERNAL | 0x102);
- return FPU_Exception;
- }
-#endif /* PARANOID */
-
- return 0;
-}
diff --git a/arch/x86/math-emu/reg_norm.S b/arch/x86/math-emu/reg_norm.S
deleted file mode 100644
index 594936eeed67..000000000000
--- a/arch/x86/math-emu/reg_norm.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | reg_norm.S |
- | |
- | Copyright (C) 1992,1993,1994,1995,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- | Normalize the value in a FPU_REG. |
- | |
- | Call from C as: |
- | int FPU_normalize(FPU_REG *n) |
- | |
- | int FPU_normalize_nuo(FPU_REG *n) |
- | |
- | Return value is the tag of the answer, or-ed with FPU_Exception if |
- | one was raised, or -1 on internal error. |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_emu.h"
-
-
-.text
-SYM_FUNC_START(FPU_normalize)
- pushl %ebp
- movl %esp,%ebp
- pushl %ebx
-
- movl PARAM1,%ebx
-
- movl SIGH(%ebx),%edx
- movl SIGL(%ebx),%eax
-
- orl %edx,%edx /* ms bits */
- js L_done /* Already normalized */
- jnz L_shift_1 /* Shift left 1 - 31 bits */
-
- orl %eax,%eax
- jz L_zero /* The contents are zero */
-
- movl %eax,%edx
- xorl %eax,%eax
- subw $32,EXP(%ebx) /* This can cause an underflow */
-
-/* We need to shift left by 1 - 31 bits */
-L_shift_1:
- bsrl %edx,%ecx /* get the required shift in %ecx */
- subl $31,%ecx
- negl %ecx
- shld %cl,%eax,%edx
- shl %cl,%eax
- subw %cx,EXP(%ebx) /* This can cause an underflow */
-
- movl %edx,SIGH(%ebx)
- movl %eax,SIGL(%ebx)
-
-L_done:
- cmpw EXP_OVER,EXP(%ebx)
- jge L_overflow
-
- cmpw EXP_UNDER,EXP(%ebx)
- jle L_underflow
-
-L_exit_valid:
- movl TAG_Valid,%eax
-
- /* Convert the exponent to 80x87 form. */
- addw EXTENDED_Ebias,EXP(%ebx)
- andw $0x7fff,EXP(%ebx)
-
-L_exit:
- popl %ebx
- leave
- RET
-
-
-L_zero:
- movw $0,EXP(%ebx)
- movl TAG_Zero,%eax
- jmp L_exit
-
-L_underflow:
- /* Convert the exponent to 80x87 form. */
- addw EXTENDED_Ebias,EXP(%ebx)
- push %ebx
- call arith_underflow
- pop %ebx
- jmp L_exit
-
-L_overflow:
- /* Convert the exponent to 80x87 form. */
- addw EXTENDED_Ebias,EXP(%ebx)
- push %ebx
- call arith_overflow
- pop %ebx
- jmp L_exit
-SYM_FUNC_END(FPU_normalize)
-
-
-
-/* Normalise without reporting underflow or overflow */
-SYM_FUNC_START(FPU_normalize_nuo)
- pushl %ebp
- movl %esp,%ebp
- pushl %ebx
-
- movl PARAM1,%ebx
-
- movl SIGH(%ebx),%edx
- movl SIGL(%ebx),%eax
-
- orl %edx,%edx /* ms bits */
- js L_exit_nuo_valid /* Already normalized */
- jnz L_nuo_shift_1 /* Shift left 1 - 31 bits */
-
- orl %eax,%eax
- jz L_exit_nuo_zero /* The contents are zero */
-
- movl %eax,%edx
- xorl %eax,%eax
- subw $32,EXP(%ebx) /* This can cause an underflow */
-
-/* We need to shift left by 1 - 31 bits */
-L_nuo_shift_1:
- bsrl %edx,%ecx /* get the required shift in %ecx */
- subl $31,%ecx
- negl %ecx
- shld %cl,%eax,%edx
- shl %cl,%eax
- subw %cx,EXP(%ebx) /* This can cause an underflow */
-
- movl %edx,SIGH(%ebx)
- movl %eax,SIGL(%ebx)
-
-L_exit_nuo_valid:
- movl TAG_Valid,%eax
-
- popl %ebx
- leave
- RET
-
-L_exit_nuo_zero:
- movl TAG_Zero,%eax
- movw EXP_UNDER,EXP(%ebx)
-
- popl %ebx
- leave
- RET
-SYM_FUNC_END(FPU_normalize_nuo)
diff --git a/arch/x86/math-emu/reg_round.S b/arch/x86/math-emu/reg_round.S
deleted file mode 100644
index 0bb2a092161a..000000000000
--- a/arch/x86/math-emu/reg_round.S
+++ /dev/null
@@ -1,711 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "reg_round.S"
-/*---------------------------------------------------------------------------+
- | reg_round.S |
- | |
- | Rounding/truncation/etc for FPU basic arithmetic functions. |
- | |
- | Copyright (C) 1993,1995,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- | This code has four possible entry points. |
- | The following must be entered by a jmp instruction: |
- | fpu_reg_round, fpu_reg_round_sqrt, and fpu_Arith_exit. |
- | |
- | The FPU_round entry point is intended to be used by C code. |
- | From C, call as: |
- | int FPU_round(FPU_REG *arg, unsigned int extent, unsigned int control_w) |
- | |
- | Return value is the tag of the answer, or-ed with FPU_Exception if |
- | one was raised, or -1 on internal error. |
- | |
- | For correct "up" and "down" rounding, the argument must have the correct |
- | sign. |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | Four entry points. |
- | |
- | Needed by both the fpu_reg_round and fpu_reg_round_sqrt entry points: |
- | %eax:%ebx 64 bit significand |
- | %edx 32 bit extension of the significand |
- | %edi pointer to an FPU_REG for the result to be stored |
- | stack calling function must have set up a C stack frame and |
- | pushed %esi, %edi, and %ebx |
- | |
- | Needed just for the fpu_reg_round_sqrt entry point: |
- | %cx A control word in the same format as the FPU control word. |
- | Otherwise, PARAM4 must give such a value. |
- | |
- | |
- | The significand and its extension are assumed to be exact in the |
- | following sense: |
- | If the significand by itself is the exact result then the significand |
- | extension (%edx) must contain 0, otherwise the significand extension |
- | must be non-zero. |
- | If the significand extension is non-zero then the significand is |
- | smaller than the magnitude of the correct exact result by an amount |
- | greater than zero and less than one ls bit of the significand. |
- | The significand extension is only required to have three possible |
- | non-zero values: |
- | less than 0x80000000 <=> the significand is less than 1/2 an ls |
- | bit smaller than the magnitude of the |
- | true exact result. |
- | exactly 0x80000000 <=> the significand is exactly 1/2 an ls bit |
- | smaller than the magnitude of the true |
- | exact result. |
- | greater than 0x80000000 <=> the significand is more than 1/2 an ls |
- | bit smaller than the magnitude of the |
- | true exact result. |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | The code in this module has become quite complex, but it should handle |
- | all of the FPU flags which are set at this stage of the basic arithmetic |
- | computations. |
- | There are a few rare cases where the results are not set identically to |
- | a real FPU. These require a bit more thought because at this stage the |
- | results of the code here appear to be more consistent... |
- | This may be changed in a future version. |
- +---------------------------------------------------------------------------*/
-
-
-#include "fpu_emu.h"
-#include "exception.h"
-#include "control_w.h"
-
-/* Flags for FPU_bits_lost */
-#define LOST_DOWN $1
-#define LOST_UP $2
-
-/* Flags for FPU_denormal */
-#define DENORMAL $1
-#define UNMASKED_UNDERFLOW $2
-
-
-#ifndef NON_REENTRANT_FPU
-/* Make the code re-entrant by putting
- local storage on the stack: */
-#define FPU_bits_lost (%esp)
-#define FPU_denormal 1(%esp)
-
-#else
-/* Not re-entrant, so we can gain speed by putting
- local storage in a static area: */
-.data
- .align 4,0
-FPU_bits_lost:
- .byte 0
-FPU_denormal:
- .byte 0
-#endif /* NON_REENTRANT_FPU */
-
-
-.text
-.globl fpu_reg_round
-.globl fpu_Arith_exit
-
-/* Entry point when called from C */
-SYM_FUNC_START(FPU_round)
- pushl %ebp
- movl %esp,%ebp
- pushl %esi
- pushl %edi
- pushl %ebx
-
- movl PARAM1,%edi
- movl SIGH(%edi),%eax
- movl SIGL(%edi),%ebx
- movl PARAM2,%edx
-
-fpu_reg_round: /* Normal entry point */
- movl PARAM4,%ecx
-
-#ifndef NON_REENTRANT_FPU
- pushl %ebx /* adjust the stack pointer */
-#endif /* NON_REENTRANT_FPU */
-
-#ifdef PARANOID
-/* Cannot use this here yet */
-/* orl %eax,%eax */
-/* jns L_entry_bugged */
-#endif /* PARANOID */
-
- cmpw EXP_UNDER,EXP(%edi)
- jle L_Make_denorm /* The number is a de-normal */
-
- movb $0,FPU_denormal /* 0 -> not a de-normal */
-
-Denorm_done:
- movb $0,FPU_bits_lost /* No bits yet lost in rounding */
-
- movl %ecx,%esi
- andl CW_PC,%ecx
- cmpl PR_64_BITS,%ecx
- je LRound_To_64
-
- cmpl PR_53_BITS,%ecx
- je LRound_To_53
-
- cmpl PR_24_BITS,%ecx
- je LRound_To_24
-
-#ifdef PECULIAR_486
-/* With the precision control bits set to 01 "(reserved)", a real 80486
- behaves as if the precision control bits were set to 11 "64 bits" */
- cmpl PR_RESERVED_BITS,%ecx
- je LRound_To_64
-#ifdef PARANOID
- jmp L_bugged_denorm_486
-#endif /* PARANOID */
-#else
-#ifdef PARANOID
- jmp L_bugged_denorm /* There is no bug, just a bad control word */
-#endif /* PARANOID */
-#endif /* PECULIAR_486 */
-
-
-/* Round etc to 24 bit precision */
-LRound_To_24:
- movl %esi,%ecx
- andl CW_RC,%ecx
- cmpl RC_RND,%ecx
- je LRound_nearest_24
-
- cmpl RC_CHOP,%ecx
- je LCheck_truncate_24
-
- cmpl RC_UP,%ecx /* Towards +infinity */
- je LUp_24
-
- cmpl RC_DOWN,%ecx /* Towards -infinity */
- je LDown_24
-
-#ifdef PARANOID
- jmp L_bugged_round24
-#endif /* PARANOID */
-
-LUp_24:
- cmpb SIGN_POS,PARAM5
- jne LCheck_truncate_24 /* If negative then up==truncate */
-
- jmp LCheck_24_round_up
-
-LDown_24:
- cmpb SIGN_POS,PARAM5
- je LCheck_truncate_24 /* If positive then down==truncate */
-
-LCheck_24_round_up:
- movl %eax,%ecx
- andl $0x000000ff,%ecx
- orl %ebx,%ecx
- orl %edx,%ecx
- jnz LDo_24_round_up
- jmp L_Re_normalise
-
-LRound_nearest_24:
- /* Do rounding of the 24th bit if needed (nearest or even) */
- movl %eax,%ecx
- andl $0x000000ff,%ecx
- cmpl $0x00000080,%ecx
- jc LCheck_truncate_24 /* less than half, no increment needed */
-
- jne LGreater_Half_24 /* greater than half, increment needed */
-
- /* Possibly half, we need to check the ls bits */
- orl %ebx,%ebx
- jnz LGreater_Half_24 /* greater than half, increment needed */
-
- orl %edx,%edx
- jnz LGreater_Half_24 /* greater than half, increment needed */
-
- /* Exactly half, increment only if 24th bit is 1 (round to even) */
- testl $0x00000100,%eax
- jz LDo_truncate_24
-
-LGreater_Half_24: /* Rounding: increment at the 24th bit */
-LDo_24_round_up:
- andl $0xffffff00,%eax /* Truncate to 24 bits */
- xorl %ebx,%ebx
- movb LOST_UP,FPU_bits_lost
- addl $0x00000100,%eax
- jmp LCheck_Round_Overflow
-
-LCheck_truncate_24:
- movl %eax,%ecx
- andl $0x000000ff,%ecx
- orl %ebx,%ecx
- orl %edx,%ecx
- jz L_Re_normalise /* No truncation needed */
-
-LDo_truncate_24:
- andl $0xffffff00,%eax /* Truncate to 24 bits */
- xorl %ebx,%ebx
- movb LOST_DOWN,FPU_bits_lost
- jmp L_Re_normalise
-
-
-/* Round etc to 53 bit precision */
-LRound_To_53:
- movl %esi,%ecx
- andl CW_RC,%ecx
- cmpl RC_RND,%ecx
- je LRound_nearest_53
-
- cmpl RC_CHOP,%ecx
- je LCheck_truncate_53
-
- cmpl RC_UP,%ecx /* Towards +infinity */
- je LUp_53
-
- cmpl RC_DOWN,%ecx /* Towards -infinity */
- je LDown_53
-
-#ifdef PARANOID
- jmp L_bugged_round53
-#endif /* PARANOID */
-
-LUp_53:
- cmpb SIGN_POS,PARAM5
- jne LCheck_truncate_53 /* If negative then up==truncate */
-
- jmp LCheck_53_round_up
-
-LDown_53:
- cmpb SIGN_POS,PARAM5
- je LCheck_truncate_53 /* If positive then down==truncate */
-
-LCheck_53_round_up:
- movl %ebx,%ecx
- andl $0x000007ff,%ecx
- orl %edx,%ecx
- jnz LDo_53_round_up
- jmp L_Re_normalise
-
-LRound_nearest_53:
- /* Do rounding of the 53rd bit if needed (nearest or even) */
- movl %ebx,%ecx
- andl $0x000007ff,%ecx
- cmpl $0x00000400,%ecx
- jc LCheck_truncate_53 /* less than half, no increment needed */
-
- jnz LGreater_Half_53 /* greater than half, increment needed */
-
- /* Possibly half, we need to check the ls bits */
- orl %edx,%edx
- jnz LGreater_Half_53 /* greater than half, increment needed */
-
- /* Exactly half, increment only if 53rd bit is 1 (round to even) */
- testl $0x00000800,%ebx
- jz LTruncate_53
-
-LGreater_Half_53: /* Rounding: increment at the 53rd bit */
-LDo_53_round_up:
- movb LOST_UP,FPU_bits_lost
- andl $0xfffff800,%ebx /* Truncate to 53 bits */
- addl $0x00000800,%ebx
- adcl $0,%eax
- jmp LCheck_Round_Overflow
-
-LCheck_truncate_53:
- movl %ebx,%ecx
- andl $0x000007ff,%ecx
- orl %edx,%ecx
- jz L_Re_normalise
-
-LTruncate_53:
- movb LOST_DOWN,FPU_bits_lost
- andl $0xfffff800,%ebx /* Truncate to 53 bits */
- jmp L_Re_normalise
-
-
-/* Round etc to 64 bit precision */
-LRound_To_64:
- movl %esi,%ecx
- andl CW_RC,%ecx
- cmpl RC_RND,%ecx
- je LRound_nearest_64
-
- cmpl RC_CHOP,%ecx
- je LCheck_truncate_64
-
- cmpl RC_UP,%ecx /* Towards +infinity */
- je LUp_64
-
- cmpl RC_DOWN,%ecx /* Towards -infinity */
- je LDown_64
-
-#ifdef PARANOID
- jmp L_bugged_round64
-#endif /* PARANOID */
-
-LUp_64:
- cmpb SIGN_POS,PARAM5
- jne LCheck_truncate_64 /* If negative then up==truncate */
-
- orl %edx,%edx
- jnz LDo_64_round_up
- jmp L_Re_normalise
-
-LDown_64:
- cmpb SIGN_POS,PARAM5
- je LCheck_truncate_64 /* If positive then down==truncate */
-
- orl %edx,%edx
- jnz LDo_64_round_up
- jmp L_Re_normalise
-
-LRound_nearest_64:
- cmpl $0x80000000,%edx
- jc LCheck_truncate_64
-
- jne LDo_64_round_up
-
- /* Now test for round-to-even */
- testb $1,%bl
- jz LCheck_truncate_64
-
-LDo_64_round_up:
- movb LOST_UP,FPU_bits_lost
- addl $1,%ebx
- adcl $0,%eax
-
-LCheck_Round_Overflow:
- jnc L_Re_normalise
-
- /* Overflow, adjust the result (significand to 1.0) */
- rcrl $1,%eax
- rcrl $1,%ebx
- incw EXP(%edi)
- jmp L_Re_normalise
-
-LCheck_truncate_64:
- orl %edx,%edx
- jz L_Re_normalise
-
-LTruncate_64:
- movb LOST_DOWN,FPU_bits_lost
-
-L_Re_normalise:
- testb $0xff,FPU_denormal
- jnz Normalise_result
-
-L_Normalised:
- movl TAG_Valid,%edx
-
-L_deNormalised:
- cmpb LOST_UP,FPU_bits_lost
- je L_precision_lost_up
-
- cmpb LOST_DOWN,FPU_bits_lost
- je L_precision_lost_down
-
-L_no_precision_loss:
- /* store the result */
-
-L_Store_significand:
- movl %eax,SIGH(%edi)
- movl %ebx,SIGL(%edi)
-
- cmpw EXP_OVER,EXP(%edi)
- jge L_overflow
-
- movl %edx,%eax
-
- /* Convert the exponent to 80x87 form. */
- addw EXTENDED_Ebias,EXP(%edi)
- andw $0x7fff,EXP(%edi)
-
-fpu_reg_round_signed_special_exit:
-
- cmpb SIGN_POS,PARAM5
- je fpu_reg_round_special_exit
-
- orw $0x8000,EXP(%edi) /* Negative sign for the result. */
-
-fpu_reg_round_special_exit:
-
-#ifndef NON_REENTRANT_FPU
- popl %ebx /* adjust the stack pointer */
-#endif /* NON_REENTRANT_FPU */
-
-fpu_Arith_exit:
- popl %ebx
- popl %edi
- popl %esi
- leave
- RET
-
-
-/*
- * Set the FPU status flags to represent precision loss due to
- * round-up.
- */
-L_precision_lost_up:
- push %edx
- push %eax
- call set_precision_flag_up
- popl %eax
- popl %edx
- jmp L_no_precision_loss
-
-/*
- * Set the FPU status flags to represent precision loss due to
- * truncation.
- */
-L_precision_lost_down:
- push %edx
- push %eax
- call set_precision_flag_down
- popl %eax
- popl %edx
- jmp L_no_precision_loss
-
-
-/*
- * The number is a denormal (which might get rounded up to a normal)
- * Shift the number right the required number of bits, which will
- * have to be undone later...
- */
-L_Make_denorm:
- /* The action to be taken depends upon whether the underflow
- exception is masked */
- testb CW_Underflow,%cl /* Underflow mask. */
- jz Unmasked_underflow /* Do not make a denormal. */
-
- movb DENORMAL,FPU_denormal
-
- pushl %ecx /* Save */
- movw EXP_UNDER+1,%cx
- subw EXP(%edi),%cx
-
- cmpw $64,%cx /* shrd only works for 0..31 bits */
- jnc Denorm_shift_more_than_63
-
- cmpw $32,%cx /* shrd only works for 0..31 bits */
- jnc Denorm_shift_more_than_32
-
-/*
- * We got here without jumps by assuming that the most common requirement
- * is for a small de-normalising shift.
- * Shift by [1..31] bits
- */
- addw %cx,EXP(%edi)
- orl %edx,%edx /* extension */
- setne %ch /* Save whether %edx is non-zero */
- xorl %edx,%edx
- shrd %cl,%ebx,%edx
- shrd %cl,%eax,%ebx
- shr %cl,%eax
- orb %ch,%dl
- popl %ecx
- jmp Denorm_done
-
-/* Shift by [32..63] bits */
-Denorm_shift_more_than_32:
- addw %cx,EXP(%edi)
- subb $32,%cl
- orl %edx,%edx
- setne %ch
- orb %ch,%bl
- xorl %edx,%edx
- shrd %cl,%ebx,%edx
- shrd %cl,%eax,%ebx
- shr %cl,%eax
- orl %edx,%edx /* test these 32 bits */
- setne %cl
- orb %ch,%bl
- orb %cl,%bl
- movl %ebx,%edx
- movl %eax,%ebx
- xorl %eax,%eax
- popl %ecx
- jmp Denorm_done
-
-/* Shift by [64..) bits */
-Denorm_shift_more_than_63:
- cmpw $64,%cx
- jne Denorm_shift_more_than_64
-
-/* Exactly 64 bit shift */
- addw %cx,EXP(%edi)
- xorl %ecx,%ecx
- orl %edx,%edx
- setne %cl
- orl %ebx,%ebx
- setne %ch
- orb %ch,%cl
- orb %cl,%al
- movl %eax,%edx
- xorl %eax,%eax
- xorl %ebx,%ebx
- popl %ecx
- jmp Denorm_done
-
-Denorm_shift_more_than_64:
- movw EXP_UNDER+1,EXP(%edi)
-/* This is easy, %eax must be non-zero, so.. */
- movl $1,%edx
- xorl %eax,%eax
- xorl %ebx,%ebx
- popl %ecx
- jmp Denorm_done
-
-
-Unmasked_underflow:
- movb UNMASKED_UNDERFLOW,FPU_denormal
- jmp Denorm_done
-
-
-/* Undo the de-normalisation. */
-Normalise_result:
- cmpb UNMASKED_UNDERFLOW,FPU_denormal
- je Signal_underflow
-
-/* The number must be a denormal if we got here. */
-#ifdef PARANOID
- /* But check it... just in case. */
- cmpw EXP_UNDER+1,EXP(%edi)
- jne L_norm_bugged
-#endif /* PARANOID */
-
-#ifdef PECULIAR_486
- /*
- * This implements a special feature of 80486 behaviour.
- * Underflow will be signaled even if the number is
- * not a denormal after rounding.
- * This difference occurs only for masked underflow, and not
- * in the unmasked case.
- * Actual 80486 behaviour differs from this in some circumstances.
- */
- orl %eax,%eax /* ms bits */
- js LPseudoDenormal /* Will be masked underflow */
-#else
- orl %eax,%eax /* ms bits */
- js L_Normalised /* No longer a denormal */
-#endif /* PECULIAR_486 */
-
- jnz LDenormal_adj_exponent
-
- orl %ebx,%ebx
- jz L_underflow_to_zero /* The contents are zero */
-
-LDenormal_adj_exponent:
- decw EXP(%edi)
-
-LPseudoDenormal:
- testb $0xff,FPU_bits_lost /* bits lost == underflow */
- movl TAG_Special,%edx
- jz L_deNormalised
-
- /* There must be a masked underflow */
- push %eax
- pushl EX_Underflow
- call EXCEPTION
- popl %eax
- popl %eax
- movl TAG_Special,%edx
- jmp L_deNormalised
-
-
-/*
- * The operations resulted in a number too small to represent.
- * Masked response.
- */
-L_underflow_to_zero:
- push %eax
- call set_precision_flag_down
- popl %eax
-
- push %eax
- pushl EX_Underflow
- call EXCEPTION
- popl %eax
- popl %eax
-
-/* Reduce the exponent to EXP_UNDER */
- movw EXP_UNDER,EXP(%edi)
- movl TAG_Zero,%edx
- jmp L_Store_significand
-
-
-/* The operations resulted in a number too large to represent. */
-L_overflow:
- addw EXTENDED_Ebias,EXP(%edi) /* Set for unmasked response. */
- push %edi
- call arith_overflow
- pop %edi
- jmp fpu_reg_round_signed_special_exit
-
-
-Signal_underflow:
- /* The number may have been changed to a non-denormal */
- /* by the rounding operations. */
- cmpw EXP_UNDER,EXP(%edi)
- jle Do_unmasked_underflow
-
- jmp L_Normalised
-
-Do_unmasked_underflow:
- /* Increase the exponent by the magic number */
- addw $(3*(1<<13)),EXP(%edi)
- push %eax
- pushl EX_Underflow
- call EXCEPTION
- popl %eax
- popl %eax
- jmp L_Normalised
-
-
-#ifdef PARANOID
-#ifdef PECULIAR_486
-L_bugged_denorm_486:
- pushl EX_INTERNAL|0x236
- call EXCEPTION
- popl %ebx
- jmp L_exception_exit
-#else
-L_bugged_denorm:
- pushl EX_INTERNAL|0x230
- call EXCEPTION
- popl %ebx
- jmp L_exception_exit
-#endif /* PECULIAR_486 */
-
-L_bugged_round24:
- pushl EX_INTERNAL|0x231
- call EXCEPTION
- popl %ebx
- jmp L_exception_exit
-
-L_bugged_round53:
- pushl EX_INTERNAL|0x232
- call EXCEPTION
- popl %ebx
- jmp L_exception_exit
-
-L_bugged_round64:
- pushl EX_INTERNAL|0x233
- call EXCEPTION
- popl %ebx
- jmp L_exception_exit
-
-L_norm_bugged:
- pushl EX_INTERNAL|0x234
- call EXCEPTION
- popl %ebx
- jmp L_exception_exit
-
-L_entry_bugged:
- pushl EX_INTERNAL|0x235
- call EXCEPTION
- popl %ebx
-L_exception_exit:
- mov $-1,%eax
- jmp fpu_reg_round_special_exit
-#endif /* PARANOID */
-
-SYM_FUNC_END(FPU_round)
diff --git a/arch/x86/math-emu/reg_u_add.S b/arch/x86/math-emu/reg_u_add.S
deleted file mode 100644
index 07247287a3af..000000000000
--- a/arch/x86/math-emu/reg_u_add.S
+++ /dev/null
@@ -1,169 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "reg_u_add.S"
-/*---------------------------------------------------------------------------+
- | reg_u_add.S |
- | |
- | Add two valid (TAG_Valid) FPU_REG numbers, of the same sign, and put the |
- | result in a destination FPU_REG. |
- | |
- | Copyright (C) 1992,1993,1995,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | Call from C as: |
- | int FPU_u_add(FPU_REG *arg1, FPU_REG *arg2, FPU_REG *answ, |
- | int control_w) |
- | Return value is the tag of the answer, or-ed with FPU_Exception if |
- | one was raised, or -1 on internal error. |
- | |
- +---------------------------------------------------------------------------*/
-
-/*
- | Kernel addition routine FPU_u_add(reg *arg1, reg *arg2, reg *answ).
- | Takes two valid reg f.p. numbers (TAG_Valid), which are
- | treated as unsigned numbers,
- | and returns their sum as a TAG_Valid or TAG_Special f.p. number.
- | The returned number is normalized.
- | Basic checks are performed if PARANOID is defined.
- */
-
-#include "exception.h"
-#include "fpu_emu.h"
-#include "control_w.h"
-
-.text
-SYM_FUNC_START(FPU_u_add)
- pushl %ebp
- movl %esp,%ebp
- pushl %esi
- pushl %edi
- pushl %ebx
-
- movl PARAM1,%esi /* source 1 */
- movl PARAM2,%edi /* source 2 */
-
- movl PARAM6,%ecx
- movl %ecx,%edx
- subl PARAM7,%ecx /* exp1 - exp2 */
- jge L_arg1_larger
-
- /* num1 is smaller */
- movl SIGL(%esi),%ebx
- movl SIGH(%esi),%eax
-
- movl %edi,%esi
- movl PARAM7,%edx
- negw %cx
- jmp L_accum_loaded
-
-L_arg1_larger:
- /* num1 has larger or equal exponent */
- movl SIGL(%edi),%ebx
- movl SIGH(%edi),%eax
-
-L_accum_loaded:
- movl PARAM3,%edi /* destination */
- movw %dx,EXP(%edi) /* Copy exponent to destination */
-
- xorl %edx,%edx /* clear the extension */
-
-#ifdef PARANOID
- testl $0x80000000,%eax
- je L_bugged
-
- testl $0x80000000,SIGH(%esi)
- je L_bugged
-#endif /* PARANOID */
-
-/* The number to be shifted is in %eax:%ebx:%edx */
- cmpw $32,%cx /* shrd only works for 0..31 bits */
- jnc L_more_than_31
-
-/* less than 32 bits */
- shrd %cl,%ebx,%edx
- shrd %cl,%eax,%ebx
- shr %cl,%eax
- jmp L_shift_done
-
-L_more_than_31:
- cmpw $64,%cx
- jnc L_more_than_63
-
- subb $32,%cl
- jz L_exactly_32
-
- shrd %cl,%eax,%edx
- shr %cl,%eax
- orl %ebx,%ebx
- jz L_more_31_no_low /* none of the lowest bits is set */
-
- orl $1,%edx /* record the fact in the extension */
-
-L_more_31_no_low:
- movl %eax,%ebx
- xorl %eax,%eax
- jmp L_shift_done
-
-L_exactly_32:
- movl %ebx,%edx
- movl %eax,%ebx
- xorl %eax,%eax
- jmp L_shift_done
-
-L_more_than_63:
- cmpw $65,%cx
- jnc L_more_than_64
-
- movl %eax,%edx
- orl %ebx,%ebx
- jz L_more_63_no_low
-
- orl $1,%edx
- jmp L_more_63_no_low
-
-L_more_than_64:
- movl $1,%edx /* The shifted nr always at least one '1' */
-
-L_more_63_no_low:
- xorl %ebx,%ebx
- xorl %eax,%eax
-
-L_shift_done:
- /* Now do the addition */
- addl SIGL(%esi),%ebx
- adcl SIGH(%esi),%eax
- jnc L_round_the_result
-
- /* Overflow, adjust the result */
- rcrl $1,%eax
- rcrl $1,%ebx
- rcrl $1,%edx
- jnc L_no_bit_lost
-
- orl $1,%edx
-
-L_no_bit_lost:
- incw EXP(%edi)
-
-L_round_the_result:
- jmp fpu_reg_round /* Round the result */
-
-
-
-#ifdef PARANOID
-/* If we ever get here then we have problems! */
-L_bugged:
- pushl EX_INTERNAL|0x201
- call EXCEPTION
- pop %ebx
- movl $-1,%eax
- jmp L_exit
-
-L_exit:
- popl %ebx
- popl %edi
- popl %esi
- leave
- RET
-#endif /* PARANOID */
-SYM_FUNC_END(FPU_u_add)
diff --git a/arch/x86/math-emu/reg_u_div.S b/arch/x86/math-emu/reg_u_div.S
deleted file mode 100644
index b5a41e2fc484..000000000000
--- a/arch/x86/math-emu/reg_u_div.S
+++ /dev/null
@@ -1,474 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "reg_u_div.S"
-/*---------------------------------------------------------------------------+
- | reg_u_div.S |
- | |
- | Divide one FPU_REG by another and put the result in a destination FPU_REG.|
- | |
- | Copyright (C) 1992,1993,1995,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | Call from C as: |
- | int FPU_u_div(FPU_REG *a, FPU_REG *b, FPU_REG *dest, |
- | unsigned int control_word, char *sign) |
- | |
- | Does not compute the destination exponent, but does adjust it. |
- | |
- | Return value is the tag of the answer, or-ed with FPU_Exception if |
- | one was raised, or -1 on internal error. |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "fpu_emu.h"
-#include "control_w.h"
-
-
-/* #define dSIGL(x) (x) */
-/* #define dSIGH(x) 4(x) */
-
-
-#ifndef NON_REENTRANT_FPU
-/*
- Local storage on the stack:
- Result: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0
- Overflow flag: ovfl_flag
- */
-#define FPU_accum_3 -4(%ebp)
-#define FPU_accum_2 -8(%ebp)
-#define FPU_accum_1 -12(%ebp)
-#define FPU_accum_0 -16(%ebp)
-#define FPU_result_1 -20(%ebp)
-#define FPU_result_2 -24(%ebp)
-#define FPU_ovfl_flag -28(%ebp)
-
-#else
-.data
-/*
- Local storage in a static area:
- Result: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0
- Overflow flag: ovfl_flag
- */
- .align 4,0
-FPU_accum_3:
- .long 0
-FPU_accum_2:
- .long 0
-FPU_accum_1:
- .long 0
-FPU_accum_0:
- .long 0
-FPU_result_1:
- .long 0
-FPU_result_2:
- .long 0
-FPU_ovfl_flag:
- .byte 0
-#endif /* NON_REENTRANT_FPU */
-
-#define REGA PARAM1
-#define REGB PARAM2
-#define DEST PARAM3
-
-.text
-SYM_FUNC_START(FPU_u_div)
- pushl %ebp
- movl %esp,%ebp
-#ifndef NON_REENTRANT_FPU
- subl $28,%esp
-#endif /* NON_REENTRANT_FPU */
-
- pushl %esi
- pushl %edi
- pushl %ebx
-
- movl REGA,%esi
- movl REGB,%ebx
- movl DEST,%edi
-
- movswl EXP(%esi),%edx
- movswl EXP(%ebx),%eax
- subl %eax,%edx
- addl EXP_BIAS,%edx
-
- /* A denormal and a large number can cause an exponent underflow */
- cmpl EXP_WAY_UNDER,%edx
- jg xExp_not_underflow
-
- /* Set to a really low value allow correct handling */
- movl EXP_WAY_UNDER,%edx
-
-xExp_not_underflow:
-
- movw %dx,EXP(%edi)
-
-#ifdef PARANOID
-/* testl $0x80000000, SIGH(%esi) // Dividend */
-/* je L_bugged */
- testl $0x80000000, SIGH(%ebx) /* Divisor */
- je L_bugged
-#endif /* PARANOID */
-
-/* Check if the divisor can be treated as having just 32 bits */
- cmpl $0,SIGL(%ebx)
- jnz L_Full_Division /* Can't do a quick divide */
-
-/* We should be able to zip through the division here */
- movl SIGH(%ebx),%ecx /* The divisor */
- movl SIGH(%esi),%edx /* Dividend */
- movl SIGL(%esi),%eax /* Dividend */
-
- cmpl %ecx,%edx
- setaeb FPU_ovfl_flag /* Keep a record */
- jb L_no_adjust
-
- subl %ecx,%edx /* Prevent the overflow */
-
-L_no_adjust:
- /* Divide the 64 bit number by the 32 bit denominator */
- divl %ecx
- movl %eax,FPU_result_2
-
- /* Work on the remainder of the first division */
- xorl %eax,%eax
- divl %ecx
- movl %eax,FPU_result_1
-
- /* Work on the remainder of the 64 bit division */
- xorl %eax,%eax
- divl %ecx
-
- testb $255,FPU_ovfl_flag /* was the num > denom ? */
- je L_no_overflow
-
- /* Do the shifting here */
- /* increase the exponent */
- incw EXP(%edi)
-
- /* shift the mantissa right one bit */
- stc /* To set the ms bit */
- rcrl FPU_result_2
- rcrl FPU_result_1
- rcrl %eax
-
-L_no_overflow:
- jmp LRound_precision /* Do the rounding as required */
-
-
-/*---------------------------------------------------------------------------+
- | Divide: Return arg1/arg2 to arg3. |
- | |
- | This routine does not use the exponents of arg1 and arg2, but does |
- | adjust the exponent of arg3. |
- | |
- | The maximum returned value is (ignoring exponents) |
- | .ffffffff ffffffff |
- | ------------------ = 1.ffffffff fffffffe |
- | .80000000 00000000 |
- | and the minimum is |
- | .80000000 00000000 |
- | ------------------ = .80000000 00000001 (rounded) |
- | .ffffffff ffffffff |
- | |
- +---------------------------------------------------------------------------*/
-
-
-L_Full_Division:
- /* Save extended dividend in local register */
- movl SIGL(%esi),%eax
- movl %eax,FPU_accum_2
- movl SIGH(%esi),%eax
- movl %eax,FPU_accum_3
- xorl %eax,%eax
- movl %eax,FPU_accum_1 /* zero the extension */
- movl %eax,FPU_accum_0 /* zero the extension */
-
- movl SIGL(%esi),%eax /* Get the current num */
- movl SIGH(%esi),%edx
-
-/*----------------------------------------------------------------------*/
-/* Initialization done.
- Do the first 32 bits. */
-
- movb $0,FPU_ovfl_flag
- cmpl SIGH(%ebx),%edx /* Test for imminent overflow */
- jb LLess_than_1
- ja LGreater_than_1
-
- cmpl SIGL(%ebx),%eax
- jb LLess_than_1
-
-LGreater_than_1:
-/* The dividend is greater or equal, would cause overflow */
- setaeb FPU_ovfl_flag /* Keep a record */
-
- subl SIGL(%ebx),%eax
- sbbl SIGH(%ebx),%edx /* Prevent the overflow */
- movl %eax,FPU_accum_2
- movl %edx,FPU_accum_3
-
-LLess_than_1:
-/* At this point, we have a dividend < divisor, with a record of
- adjustment in FPU_ovfl_flag */
-
- /* We will divide by a number which is too large */
- movl SIGH(%ebx),%ecx
- addl $1,%ecx
- jnc LFirst_div_not_1
-
- /* here we need to divide by 100000000h,
- i.e., no division at all.. */
- mov %edx,%eax
- jmp LFirst_div_done
-
-LFirst_div_not_1:
- divl %ecx /* Divide the numerator by the augmented
- denom ms dw */
-
-LFirst_div_done:
- movl %eax,FPU_result_2 /* Put the result in the answer */
-
- mull SIGH(%ebx) /* mul by the ms dw of the denom */
-
- subl %eax,FPU_accum_2 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_3
-
- movl FPU_result_2,%eax /* Get the result back */
- mull SIGL(%ebx) /* now mul the ls dw of the denom */
-
- subl %eax,FPU_accum_1 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_2
- sbbl $0,FPU_accum_3
- je LDo_2nd_32_bits /* Must check for non-zero result here */
-
-#ifdef PARANOID
- jb L_bugged_1
-#endif /* PARANOID */
-
- /* need to subtract another once of the denom */
- incl FPU_result_2 /* Correct the answer */
-
- movl SIGL(%ebx),%eax
- movl SIGH(%ebx),%edx
- subl %eax,FPU_accum_1 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_2
-
-#ifdef PARANOID
- sbbl $0,FPU_accum_3
- jne L_bugged_1 /* Must check for non-zero result here */
-#endif /* PARANOID */
-
-/*----------------------------------------------------------------------*/
-/* Half of the main problem is done, there is just a reduced numerator
- to handle now.
- Work with the second 32 bits, FPU_accum_0 not used from now on */
-LDo_2nd_32_bits:
- movl FPU_accum_2,%edx /* get the reduced num */
- movl FPU_accum_1,%eax
-
- /* need to check for possible subsequent overflow */
- cmpl SIGH(%ebx),%edx
- jb LDo_2nd_div
- ja LPrevent_2nd_overflow
-
- cmpl SIGL(%ebx),%eax
- jb LDo_2nd_div
-
-LPrevent_2nd_overflow:
-/* The numerator is greater or equal, would cause overflow */
- /* prevent overflow */
- subl SIGL(%ebx),%eax
- sbbl SIGH(%ebx),%edx
- movl %edx,FPU_accum_2
- movl %eax,FPU_accum_1
-
- incl FPU_result_2 /* Reflect the subtraction in the answer */
-
-#ifdef PARANOID
- je L_bugged_2 /* Can't bump the result to 1.0 */
-#endif /* PARANOID */
-
-LDo_2nd_div:
- cmpl $0,%ecx /* augmented denom msw */
- jnz LSecond_div_not_1
-
- /* %ecx == 0, we are dividing by 1.0 */
- mov %edx,%eax
- jmp LSecond_div_done
-
-LSecond_div_not_1:
- divl %ecx /* Divide the numerator by the denom ms dw */
-
-LSecond_div_done:
- movl %eax,FPU_result_1 /* Put the result in the answer */
-
- mull SIGH(%ebx) /* mul by the ms dw of the denom */
-
- subl %eax,FPU_accum_1 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_2
-
-#ifdef PARANOID
- jc L_bugged_2
-#endif /* PARANOID */
-
- movl FPU_result_1,%eax /* Get the result back */
- mull SIGL(%ebx) /* now mul the ls dw of the denom */
-
- subl %eax,FPU_accum_0 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_1 /* Subtract from the num local reg */
- sbbl $0,FPU_accum_2
-
-#ifdef PARANOID
- jc L_bugged_2
-#endif /* PARANOID */
-
- jz LDo_3rd_32_bits
-
-#ifdef PARANOID
- cmpl $1,FPU_accum_2
- jne L_bugged_2
-#endif /* PARANOID */
-
- /* need to subtract another once of the denom */
- movl SIGL(%ebx),%eax
- movl SIGH(%ebx),%edx
- subl %eax,FPU_accum_0 /* Subtract from the num local reg */
- sbbl %edx,FPU_accum_1
- sbbl $0,FPU_accum_2
-
-#ifdef PARANOID
- jc L_bugged_2
- jne L_bugged_2
-#endif /* PARANOID */
-
- addl $1,FPU_result_1 /* Correct the answer */
- adcl $0,FPU_result_2
-
-#ifdef PARANOID
- jc L_bugged_2 /* Must check for non-zero result here */
-#endif /* PARANOID */
-
-/*----------------------------------------------------------------------*/
-/* The division is essentially finished here, we just need to perform
- tidying operations.
- Deal with the 3rd 32 bits */
-LDo_3rd_32_bits:
- movl FPU_accum_1,%edx /* get the reduced num */
- movl FPU_accum_0,%eax
-
- /* need to check for possible subsequent overflow */
- cmpl SIGH(%ebx),%edx /* denom */
- jb LRound_prep
- ja LPrevent_3rd_overflow
-
- cmpl SIGL(%ebx),%eax /* denom */
- jb LRound_prep
-
-LPrevent_3rd_overflow:
- /* prevent overflow */
- subl SIGL(%ebx),%eax
- sbbl SIGH(%ebx),%edx
- movl %edx,FPU_accum_1
- movl %eax,FPU_accum_0
-
- addl $1,FPU_result_1 /* Reflect the subtraction in the answer */
- adcl $0,FPU_result_2
- jne LRound_prep
- jnc LRound_prep
-
- /* This is a tricky spot, there is an overflow of the answer */
- movb $255,FPU_ovfl_flag /* Overflow -> 1.000 */
-
-LRound_prep:
-/*
- * Prepare for rounding.
- * To test for rounding, we just need to compare 2*accum with the
- * denom.
- */
- movl FPU_accum_0,%ecx
- movl FPU_accum_1,%edx
- movl %ecx,%eax
- orl %edx,%eax
- jz LRound_ovfl /* The accumulator contains zero. */
-
- /* Multiply by 2 */
- clc
- rcll $1,%ecx
- rcll $1,%edx
- jc LRound_large /* No need to compare, denom smaller */
-
- subl SIGL(%ebx),%ecx
- sbbl SIGH(%ebx),%edx
- jnc LRound_not_small
-
- movl $0x70000000,%eax /* Denom was larger */
- jmp LRound_ovfl
-
-LRound_not_small:
- jnz LRound_large
-
- movl $0x80000000,%eax /* Remainder was exactly 1/2 denom */
- jmp LRound_ovfl
-
-LRound_large:
- movl $0xff000000,%eax /* Denom was smaller */
-
-LRound_ovfl:
-/* We are now ready to deal with rounding, but first we must get
- the bits properly aligned */
- testb $255,FPU_ovfl_flag /* was the num > denom ? */
- je LRound_precision
-
- incw EXP(%edi)
-
- /* shift the mantissa right one bit */
- stc /* Will set the ms bit */
- rcrl FPU_result_2
- rcrl FPU_result_1
- rcrl %eax
-
-/* Round the result as required */
-LRound_precision:
- decw EXP(%edi) /* binary point between 1st & 2nd bits */
-
- movl %eax,%edx
- movl FPU_result_1,%ebx
- movl FPU_result_2,%eax
- jmp fpu_reg_round
-
-
-#ifdef PARANOID
-/* The logic is wrong if we got here */
-L_bugged:
- pushl EX_INTERNAL|0x202
- call EXCEPTION
- pop %ebx
- jmp L_exit
-
-L_bugged_1:
- pushl EX_INTERNAL|0x203
- call EXCEPTION
- pop %ebx
- jmp L_exit
-
-L_bugged_2:
- pushl EX_INTERNAL|0x204
- call EXCEPTION
- pop %ebx
- jmp L_exit
-
-L_exit:
- movl $-1,%eax
- popl %ebx
- popl %edi
- popl %esi
-
- leave
- RET
-#endif /* PARANOID */
-
-SYM_FUNC_END(FPU_u_div)
diff --git a/arch/x86/math-emu/reg_u_mul.S b/arch/x86/math-emu/reg_u_mul.S
deleted file mode 100644
index e2588b24b8c2..000000000000
--- a/arch/x86/math-emu/reg_u_mul.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "reg_u_mul.S"
-/*---------------------------------------------------------------------------+
- | reg_u_mul.S |
- | |
- | Core multiplication routine |
- | |
- | Copyright (C) 1992,1993,1995,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | Basic multiplication routine. |
- | Does not check the resulting exponent for overflow/underflow |
- | |
- | FPU_u_mul(FPU_REG *a, FPU_REG *b, FPU_REG *c, unsigned int cw); |
- | |
- | Internal working is at approx 128 bits. |
- | Result is rounded to nearest 53 or 64 bits, using "nearest or even". |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "fpu_emu.h"
-#include "control_w.h"
-
-
-
-#ifndef NON_REENTRANT_FPU
-/* Local storage on the stack: */
-#define FPU_accum_0 -4(%ebp) /* ms word */
-#define FPU_accum_1 -8(%ebp)
-
-#else
-/* Local storage in a static area: */
-.data
- .align 4,0
-FPU_accum_0:
- .long 0
-FPU_accum_1:
- .long 0
-#endif /* NON_REENTRANT_FPU */
-
-
-.text
-SYM_FUNC_START(FPU_u_mul)
- pushl %ebp
- movl %esp,%ebp
-#ifndef NON_REENTRANT_FPU
- subl $8,%esp
-#endif /* NON_REENTRANT_FPU */
-
- pushl %esi
- pushl %edi
- pushl %ebx
-
- movl PARAM1,%esi
- movl PARAM2,%edi
-
-#ifdef PARANOID
- testl $0x80000000,SIGH(%esi)
- jz L_bugged
- testl $0x80000000,SIGH(%edi)
- jz L_bugged
-#endif /* PARANOID */
-
- xorl %ecx,%ecx
- xorl %ebx,%ebx
-
- movl SIGL(%esi),%eax
- mull SIGL(%edi)
- movl %eax,FPU_accum_0
- movl %edx,FPU_accum_1
-
- movl SIGL(%esi),%eax
- mull SIGH(%edi)
- addl %eax,FPU_accum_1
- adcl %edx,%ebx
-/* adcl $0,%ecx // overflow here is not possible */
-
- movl SIGH(%esi),%eax
- mull SIGL(%edi)
- addl %eax,FPU_accum_1
- adcl %edx,%ebx
- adcl $0,%ecx
-
- movl SIGH(%esi),%eax
- mull SIGH(%edi)
- addl %eax,%ebx
- adcl %edx,%ecx
-
- /* Get the sum of the exponents. */
- movl PARAM6,%eax
- subl EXP_BIAS-1,%eax
-
- /* Two denormals can cause an exponent underflow */
- cmpl EXP_WAY_UNDER,%eax
- jg Exp_not_underflow
-
- /* Set to a really low value allow correct handling */
- movl EXP_WAY_UNDER,%eax
-
-Exp_not_underflow:
-
-/* Have now finished with the sources */
- movl PARAM3,%edi /* Point to the destination */
- movw %ax,EXP(%edi)
-
-/* Now make sure that the result is normalized */
- testl $0x80000000,%ecx
- jnz LResult_Normalised
-
- /* Normalize by shifting left one bit */
- shll $1,FPU_accum_0
- rcll $1,FPU_accum_1
- rcll $1,%ebx
- rcll $1,%ecx
- decw EXP(%edi)
-
-LResult_Normalised:
- movl FPU_accum_0,%eax
- movl FPU_accum_1,%edx
- orl %eax,%eax
- jz L_extent_zero
-
- orl $1,%edx
-
-L_extent_zero:
- movl %ecx,%eax
- jmp fpu_reg_round
-
-
-#ifdef PARANOID
-L_bugged:
- pushl EX_INTERNAL|0x205
- call EXCEPTION
- pop %ebx
- jmp L_exit
-
-L_exit:
- popl %ebx
- popl %edi
- popl %esi
- leave
- RET
-#endif /* PARANOID */
-
-SYM_FUNC_END(FPU_u_mul)
diff --git a/arch/x86/math-emu/reg_u_sub.S b/arch/x86/math-emu/reg_u_sub.S
deleted file mode 100644
index 4c900c29e4ff..000000000000
--- a/arch/x86/math-emu/reg_u_sub.S
+++ /dev/null
@@ -1,274 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "reg_u_sub.S"
-/*---------------------------------------------------------------------------+
- | reg_u_sub.S |
- | |
- | Core floating point subtraction routine. |
- | |
- | Copyright (C) 1992,1993,1995,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...urbia.net |
- | |
- | Call from C as: |
- | int FPU_u_sub(FPU_REG *arg1, FPU_REG *arg2, FPU_REG *answ, |
- | int control_w) |
- | Return value is the tag of the answer, or-ed with FPU_Exception if |
- | one was raised, or -1 on internal error. |
- | |
- +---------------------------------------------------------------------------*/
-
-/*
- | Kernel subtraction routine FPU_u_sub(reg *arg1, reg *arg2, reg *answ).
- | Takes two valid reg f.p. numbers (TAG_Valid), which are
- | treated as unsigned numbers,
- | and returns their difference as a TAG_Valid or TAG_Zero f.p.
- | number.
- | The first number (arg1) must be the larger.
- | The returned number is normalized.
- | Basic checks are performed if PARANOID is defined.
- */
-
-#include "exception.h"
-#include "fpu_emu.h"
-#include "control_w.h"
-
-.text
-SYM_FUNC_START(FPU_u_sub)
- pushl %ebp
- movl %esp,%ebp
- pushl %esi
- pushl %edi
- pushl %ebx
-
- movl PARAM1,%esi /* source 1 */
- movl PARAM2,%edi /* source 2 */
-
- movl PARAM6,%ecx
- subl PARAM7,%ecx /* exp1 - exp2 */
-
-#ifdef PARANOID
- /* source 2 is always smaller than source 1 */
- js L_bugged_1
-
- testl $0x80000000,SIGH(%edi) /* The args are assumed to be be normalized */
- je L_bugged_2
-
- testl $0x80000000,SIGH(%esi)
- je L_bugged_2
-#endif /* PARANOID */
-
-/*--------------------------------------+
- | Form a register holding the |
- | smaller number |
- +--------------------------------------*/
- movl SIGH(%edi),%eax /* register ms word */
- movl SIGL(%edi),%ebx /* register ls word */
-
- movl PARAM3,%edi /* destination */
- movl PARAM6,%edx
- movw %dx,EXP(%edi) /* Copy exponent to destination */
-
- xorl %edx,%edx /* register extension */
-
-/*--------------------------------------+
- | Shift the temporary register |
- | right the required number of |
- | places. |
- +--------------------------------------*/
-
- cmpw $32,%cx /* shrd only works for 0..31 bits */
- jnc L_more_than_31
-
-/* less than 32 bits */
- shrd %cl,%ebx,%edx
- shrd %cl,%eax,%ebx
- shr %cl,%eax
- jmp L_shift_done
-
-L_more_than_31:
- cmpw $64,%cx
- jnc L_more_than_63
-
- subb $32,%cl
- jz L_exactly_32
-
- shrd %cl,%eax,%edx
- shr %cl,%eax
- orl %ebx,%ebx
- jz L_more_31_no_low /* none of the lowest bits is set */
-
- orl $1,%edx /* record the fact in the extension */
-
-L_more_31_no_low:
- movl %eax,%ebx
- xorl %eax,%eax
- jmp L_shift_done
-
-L_exactly_32:
- movl %ebx,%edx
- movl %eax,%ebx
- xorl %eax,%eax
- jmp L_shift_done
-
-L_more_than_63:
- cmpw $65,%cx
- jnc L_more_than_64
-
- /* Shift right by 64 bits */
- movl %eax,%edx
- orl %ebx,%ebx
- jz L_more_63_no_low
-
- orl $1,%edx
- jmp L_more_63_no_low
-
-L_more_than_64:
- jne L_more_than_65
-
- /* Shift right by 65 bits */
- /* Carry is clear if we get here */
- movl %eax,%edx
- rcrl %edx
- jnc L_shift_65_nc
-
- orl $1,%edx
- jmp L_more_63_no_low
-
-L_shift_65_nc:
- orl %ebx,%ebx
- jz L_more_63_no_low
-
- orl $1,%edx
- jmp L_more_63_no_low
-
-L_more_than_65:
- movl $1,%edx /* The shifted nr always at least one '1' */
-
-L_more_63_no_low:
- xorl %ebx,%ebx
- xorl %eax,%eax
-
-L_shift_done:
-L_subtr:
-/*------------------------------+
- | Do the subtraction |
- +------------------------------*/
- xorl %ecx,%ecx
- subl %edx,%ecx
- movl %ecx,%edx
- movl SIGL(%esi),%ecx
- sbbl %ebx,%ecx
- movl %ecx,%ebx
- movl SIGH(%esi),%ecx
- sbbl %eax,%ecx
- movl %ecx,%eax
-
-#ifdef PARANOID
- /* We can never get a borrow */
- jc L_bugged
-#endif /* PARANOID */
-
-/*--------------------------------------+
- | Normalize the result |
- +--------------------------------------*/
- testl $0x80000000,%eax
- jnz L_round /* no shifting needed */
-
- orl %eax,%eax
- jnz L_shift_1 /* shift left 1 - 31 bits */
-
- orl %ebx,%ebx
- jnz L_shift_32 /* shift left 32 - 63 bits */
-
-/*
- * A rare case, the only one which is non-zero if we got here
- * is: 1000000 .... 0000
- * -0111111 .... 1111 1
- * --------------------
- * 0000000 .... 0000 1
- */
-
- cmpl $0x80000000,%edx
- jnz L_must_be_zero
-
- /* Shift left 64 bits */
- subw $64,EXP(%edi)
- xchg %edx,%eax
- jmp fpu_reg_round
-
-L_must_be_zero:
-#ifdef PARANOID
- orl %edx,%edx
- jnz L_bugged_3
-#endif /* PARANOID */
-
- /* The result is zero */
- movw $0,EXP(%edi) /* exponent */
- movl $0,SIGL(%edi)
- movl $0,SIGH(%edi)
- movl TAG_Zero,%eax
- jmp L_exit
-
-L_shift_32:
- movl %ebx,%eax
- movl %edx,%ebx
- movl $0,%edx
- subw $32,EXP(%edi) /* Can get underflow here */
-
-/* We need to shift left by 1 - 31 bits */
-L_shift_1:
- bsrl %eax,%ecx /* get the required shift in %ecx */
- subl $31,%ecx
- negl %ecx
- shld %cl,%ebx,%eax
- shld %cl,%edx,%ebx
- shl %cl,%edx
- subw %cx,EXP(%edi) /* Can get underflow here */
-
-L_round:
- jmp fpu_reg_round /* Round the result */
-
-
-#ifdef PARANOID
-L_bugged_1:
- pushl EX_INTERNAL|0x206
- call EXCEPTION
- pop %ebx
- jmp L_error_exit
-
-L_bugged_2:
- pushl EX_INTERNAL|0x209
- call EXCEPTION
- pop %ebx
- jmp L_error_exit
-
-L_bugged_3:
- pushl EX_INTERNAL|0x210
- call EXCEPTION
- pop %ebx
- jmp L_error_exit
-
-L_bugged_4:
- pushl EX_INTERNAL|0x211
- call EXCEPTION
- pop %ebx
- jmp L_error_exit
-
-L_bugged:
- pushl EX_INTERNAL|0x212
- call EXCEPTION
- pop %ebx
- jmp L_error_exit
-
-L_error_exit:
- movl $-1,%eax
-
-#endif /* PARANOID */
-
-L_exit:
- popl %ebx
- popl %edi
- popl %esi
- leave
- RET
-SYM_FUNC_END(FPU_u_sub)
diff --git a/arch/x86/math-emu/round_Xsig.S b/arch/x86/math-emu/round_Xsig.S
deleted file mode 100644
index 126c40473bad..000000000000
--- a/arch/x86/math-emu/round_Xsig.S
+++ /dev/null
@@ -1,142 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | round_Xsig.S |
- | |
- | Copyright (C) 1992,1993,1994,1995 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...obi.maths.monash.edu.au |
- | |
- | Normalize and round a 12 byte quantity. |
- | Call from C as: |
- | int round_Xsig(Xsig *n) |
- | |
- | Normalize a 12 byte quantity. |
- | Call from C as: |
- | int norm_Xsig(Xsig *n) |
- | |
- | Each function returns the size of the shift (nr of bits). |
- | |
- +---------------------------------------------------------------------------*/
- .file "round_Xsig.S"
-
-#include "fpu_emu.h"
-
-
-.text
-SYM_FUNC_START(round_Xsig)
- pushl %ebp
- movl %esp,%ebp
- pushl %ebx /* Reserve some space */
- pushl %ebx
- pushl %esi
-
- movl PARAM1,%esi
-
- movl 8(%esi),%edx
- movl 4(%esi),%ebx
- movl (%esi),%eax
-
- movl $0,-4(%ebp)
-
- orl %edx,%edx /* ms bits */
- js L_round /* Already normalized */
- jnz L_shift_1 /* Shift left 1 - 31 bits */
-
- movl %ebx,%edx
- movl %eax,%ebx
- xorl %eax,%eax
- movl $-32,-4(%ebp)
-
-/* We need to shift left by 1 - 31 bits */
-L_shift_1:
- bsrl %edx,%ecx /* get the required shift in %ecx */
- subl $31,%ecx
- negl %ecx
- subl %ecx,-4(%ebp)
- shld %cl,%ebx,%edx
- shld %cl,%eax,%ebx
- shl %cl,%eax
-
-L_round:
- testl $0x80000000,%eax
- jz L_exit
-
- addl $1,%ebx
- adcl $0,%edx
- jnz L_exit
-
- movl $0x80000000,%edx
- incl -4(%ebp)
-
-L_exit:
- movl %edx,8(%esi)
- movl %ebx,4(%esi)
- movl %eax,(%esi)
-
- movl -4(%ebp),%eax
-
- popl %esi
- popl %ebx
- leave
- RET
-SYM_FUNC_END(round_Xsig)
-
-
-
-SYM_FUNC_START(norm_Xsig)
- pushl %ebp
- movl %esp,%ebp
- pushl %ebx /* Reserve some space */
- pushl %ebx
- pushl %esi
-
- movl PARAM1,%esi
-
- movl 8(%esi),%edx
- movl 4(%esi),%ebx
- movl (%esi),%eax
-
- movl $0,-4(%ebp)
-
- orl %edx,%edx /* ms bits */
- js L_n_exit /* Already normalized */
- jnz L_n_shift_1 /* Shift left 1 - 31 bits */
-
- movl %ebx,%edx
- movl %eax,%ebx
- xorl %eax,%eax
- movl $-32,-4(%ebp)
-
- orl %edx,%edx /* ms bits */
- js L_n_exit /* Normalized now */
- jnz L_n_shift_1 /* Shift left 1 - 31 bits */
-
- movl %ebx,%edx
- movl %eax,%ebx
- xorl %eax,%eax
- addl $-32,-4(%ebp)
- jmp L_n_exit /* Might not be normalized,
- but shift no more. */
-
-/* We need to shift left by 1 - 31 bits */
-L_n_shift_1:
- bsrl %edx,%ecx /* get the required shift in %ecx */
- subl $31,%ecx
- negl %ecx
- subl %ecx,-4(%ebp)
- shld %cl,%ebx,%edx
- shld %cl,%eax,%ebx
- shl %cl,%eax
-
-L_n_exit:
- movl %edx,8(%esi)
- movl %ebx,4(%esi)
- movl %eax,(%esi)
-
- movl -4(%ebp),%eax
-
- popl %esi
- popl %ebx
- leave
- RET
-SYM_FUNC_END(norm_Xsig)
diff --git a/arch/x86/math-emu/shr_Xsig.S b/arch/x86/math-emu/shr_Xsig.S
deleted file mode 100644
index f726bf6f6396..000000000000
--- a/arch/x86/math-emu/shr_Xsig.S
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "shr_Xsig.S"
-/*---------------------------------------------------------------------------+
- | shr_Xsig.S |
- | |
- | 12 byte right shift function |
- | |
- | Copyright (C) 1992,1994,1995 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...obi.maths.monash.edu.au |
- | |
- | Call from C as: |
- | void shr_Xsig(Xsig *arg, unsigned nr) |
- | |
- | Extended shift right function. |
- | Fastest for small shifts. |
- | Shifts the 12 byte quantity pointed to by the first arg (arg) |
- | right by the number of bits specified by the second arg (nr). |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_emu.h"
-
-.text
-SYM_FUNC_START(shr_Xsig)
- push %ebp
- movl %esp,%ebp
- pushl %esi
- movl PARAM2,%ecx
- movl PARAM1,%esi
- cmpl $32,%ecx /* shrd only works for 0..31 bits */
- jnc L_more_than_31
-
-/* less than 32 bits */
- pushl %ebx
- movl (%esi),%eax /* lsl */
- movl 4(%esi),%ebx /* midl */
- movl 8(%esi),%edx /* msl */
- shrd %cl,%ebx,%eax
- shrd %cl,%edx,%ebx
- shr %cl,%edx
- movl %eax,(%esi)
- movl %ebx,4(%esi)
- movl %edx,8(%esi)
- popl %ebx
- popl %esi
- leave
- RET
-
-L_more_than_31:
- cmpl $64,%ecx
- jnc L_more_than_63
-
- subb $32,%cl
- movl 4(%esi),%eax /* midl */
- movl 8(%esi),%edx /* msl */
- shrd %cl,%edx,%eax
- shr %cl,%edx
- movl %eax,(%esi)
- movl %edx,4(%esi)
- movl $0,8(%esi)
- popl %esi
- leave
- RET
-
-L_more_than_63:
- cmpl $96,%ecx
- jnc L_more_than_95
-
- subb $64,%cl
- movl 8(%esi),%eax /* msl */
- shr %cl,%eax
- xorl %edx,%edx
- movl %eax,(%esi)
- movl %edx,4(%esi)
- movl %edx,8(%esi)
- popl %esi
- leave
- RET
-
-L_more_than_95:
- xorl %eax,%eax
- movl %eax,(%esi)
- movl %eax,4(%esi)
- movl %eax,8(%esi)
- popl %esi
- leave
- RET
-SYM_FUNC_END(shr_Xsig)
diff --git a/arch/x86/math-emu/status_w.h b/arch/x86/math-emu/status_w.h
deleted file mode 100644
index f642957330ef..000000000000
--- a/arch/x86/math-emu/status_w.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*---------------------------------------------------------------------------+
- | status_w.h |
- | |
- | Copyright (C) 1992,1993 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...c.cc.monash.edu.au |
- | |
- +---------------------------------------------------------------------------*/
-
-#ifndef _STATUS_H_
-#define _STATUS_H_
-
-#include "fpu_emu.h" /* for definition of PECULIAR_486 */
-
-#ifdef __ASSEMBLER__
-#define Const__(x) $##x
-#else
-#define Const__(x) x
-#endif
-
-#define SW_Backward Const__(0x8000) /* backward compatibility */
-#define SW_C3 Const__(0x4000) /* condition bit 3 */
-#define SW_Top Const__(0x3800) /* top of stack */
-#define SW_Top_Shift Const__(11) /* shift for top of stack bits */
-#define SW_C2 Const__(0x0400) /* condition bit 2 */
-#define SW_C1 Const__(0x0200) /* condition bit 1 */
-#define SW_C0 Const__(0x0100) /* condition bit 0 */
-#define SW_Summary Const__(0x0080) /* exception summary */
-#define SW_Stack_Fault Const__(0x0040) /* stack fault */
-#define SW_Precision Const__(0x0020) /* loss of precision */
-#define SW_Underflow Const__(0x0010) /* underflow */
-#define SW_Overflow Const__(0x0008) /* overflow */
-#define SW_Zero_Div Const__(0x0004) /* divide by zero */
-#define SW_Denorm_Op Const__(0x0002) /* denormalized operand */
-#define SW_Invalid Const__(0x0001) /* invalid operation */
-
-#define SW_Exc_Mask Const__(0x27f) /* Status word exception bit mask */
-
-#ifndef __ASSEMBLER__
-
-#define COMP_A_gt_B 1
-#define COMP_A_eq_B 2
-#define COMP_A_lt_B 3
-#define COMP_No_Comp 4
-#define COMP_Denormal 0x20
-#define COMP_NaN 0x40
-#define COMP_SNaN 0x80
-
-#define status_word() \
- ((partial_status & ~SW_Top & 0xffff) | ((top << SW_Top_Shift) & SW_Top))
-static inline void setcc(int cc)
-{
- partial_status &= ~(SW_C0 | SW_C1 | SW_C2 | SW_C3);
- partial_status |= (cc) & (SW_C0 | SW_C1 | SW_C2 | SW_C3);
-}
-
-#ifdef PECULIAR_486
- /* Default, this conveys no information, but an 80486 does it. */
- /* Clear the SW_C1 bit, "other bits undefined". */
-# define clear_C1() { partial_status &= ~SW_C1; }
-# else
-# define clear_C1()
-#endif /* PECULIAR_486 */
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* _STATUS_H_ */
diff --git a/arch/x86/math-emu/version.h b/arch/x86/math-emu/version.h
deleted file mode 100644
index a0d73a1d2b67..000000000000
--- a/arch/x86/math-emu/version.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*---------------------------------------------------------------------------+
- | version.h |
- | |
- | |
- | Copyright (C) 1992,1993,1994,1996,1997,1999 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia |
- | E-mail billm@...bpc.org.au |
- | |
- | |
- +---------------------------------------------------------------------------*/
-
-#define FPU_VERSION "wm-FPU-emu version 2.01"
diff --git a/arch/x86/math-emu/wm_shrx.S b/arch/x86/math-emu/wm_shrx.S
deleted file mode 100644
index f608a28a4c43..000000000000
--- a/arch/x86/math-emu/wm_shrx.S
+++ /dev/null
@@ -1,207 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "wm_shrx.S"
-/*---------------------------------------------------------------------------+
- | wm_shrx.S |
- | |
- | 64 bit right shift functions |
- | |
- | Copyright (C) 1992,1995 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...obi.maths.monash.edu.au |
- | |
- | Call from C as: |
- | unsigned FPU_shrx(void *arg1, unsigned arg2) |
- | and |
- | unsigned FPU_shrxs(void *arg1, unsigned arg2) |
- | |
- +---------------------------------------------------------------------------*/
-
-#include "fpu_emu.h"
-
-.text
-/*---------------------------------------------------------------------------+
- | unsigned FPU_shrx(void *arg1, unsigned arg2) |
- | |
- | Extended shift right function. |
- | Fastest for small shifts. |
- | Shifts the 64 bit quantity pointed to by the first arg (arg1) |
- | right by the number of bits specified by the second arg (arg2). |
- | Forms a 96 bit quantity from the 64 bit arg and eax: |
- | [ 64 bit arg ][ eax ] |
- | shift right ---------> |
- | The eax register is initialized to 0 before the shifting. |
- | Results returned in the 64 bit arg and eax. |
- +---------------------------------------------------------------------------*/
-
-SYM_FUNC_START(FPU_shrx)
- push %ebp
- movl %esp,%ebp
- pushl %esi
- movl PARAM2,%ecx
- movl PARAM1,%esi
- cmpl $32,%ecx /* shrd only works for 0..31 bits */
- jnc L_more_than_31
-
-/* less than 32 bits */
- pushl %ebx
- movl (%esi),%ebx /* lsl */
- movl 4(%esi),%edx /* msl */
- xorl %eax,%eax /* extension */
- shrd %cl,%ebx,%eax
- shrd %cl,%edx,%ebx
- shr %cl,%edx
- movl %ebx,(%esi)
- movl %edx,4(%esi)
- popl %ebx
- popl %esi
- leave
- RET
-
-L_more_than_31:
- cmpl $64,%ecx
- jnc L_more_than_63
-
- subb $32,%cl
- movl (%esi),%eax /* lsl */
- movl 4(%esi),%edx /* msl */
- shrd %cl,%edx,%eax
- shr %cl,%edx
- movl %edx,(%esi)
- movl $0,4(%esi)
- popl %esi
- leave
- RET
-
-L_more_than_63:
- cmpl $96,%ecx
- jnc L_more_than_95
-
- subb $64,%cl
- movl 4(%esi),%eax /* msl */
- shr %cl,%eax
- xorl %edx,%edx
- movl %edx,(%esi)
- movl %edx,4(%esi)
- popl %esi
- leave
- RET
-
-L_more_than_95:
- xorl %eax,%eax
- movl %eax,(%esi)
- movl %eax,4(%esi)
- popl %esi
- leave
- RET
-SYM_FUNC_END(FPU_shrx)
-
-
-/*---------------------------------------------------------------------------+
- | unsigned FPU_shrxs(void *arg1, unsigned arg2) |
- | |
- | Extended shift right function (optimized for small floating point |
- | integers). |
- | Shifts the 64 bit quantity pointed to by the first arg (arg1) |
- | right by the number of bits specified by the second arg (arg2). |
- | Forms a 96 bit quantity from the 64 bit arg and eax: |
- | [ 64 bit arg ][ eax ] |
- | shift right ---------> |
- | The eax register is initialized to 0 before the shifting. |
- | The lower 8 bits of eax are lost and replaced by a flag which is |
- | set (to 0x01) if any bit, apart from the first one, is set in the |
- | part which has been shifted out of the arg. |
- | Results returned in the 64 bit arg and eax. |
- +---------------------------------------------------------------------------*/
-SYM_FUNC_START(FPU_shrxs)
- push %ebp
- movl %esp,%ebp
- pushl %esi
- pushl %ebx
- movl PARAM2,%ecx
- movl PARAM1,%esi
- cmpl $64,%ecx /* shrd only works for 0..31 bits */
- jnc Ls_more_than_63
-
- cmpl $32,%ecx /* shrd only works for 0..31 bits */
- jc Ls_less_than_32
-
-/* We got here without jumps by assuming that the most common requirement
- is for small integers */
-/* Shift by [32..63] bits */
- subb $32,%cl
- movl (%esi),%eax /* lsl */
- movl 4(%esi),%edx /* msl */
- xorl %ebx,%ebx
- shrd %cl,%eax,%ebx
- shrd %cl,%edx,%eax
- shr %cl,%edx
- orl %ebx,%ebx /* test these 32 bits */
- setne %bl
- test $0x7fffffff,%eax /* and 31 bits here */
- setne %bh
- orw %bx,%bx /* Any of the 63 bit set ? */
- setne %al
- movl %edx,(%esi)
- movl $0,4(%esi)
- popl %ebx
- popl %esi
- leave
- RET
-
-/* Shift by [0..31] bits */
-Ls_less_than_32:
- movl (%esi),%ebx /* lsl */
- movl 4(%esi),%edx /* msl */
- xorl %eax,%eax /* extension */
- shrd %cl,%ebx,%eax
- shrd %cl,%edx,%ebx
- shr %cl,%edx
- test $0x7fffffff,%eax /* only need to look at eax here */
- setne %al
- movl %ebx,(%esi)
- movl %edx,4(%esi)
- popl %ebx
- popl %esi
- leave
- RET
-
-/* Shift by [64..95] bits */
-Ls_more_than_63:
- cmpl $96,%ecx
- jnc Ls_more_than_95
-
- subb $64,%cl
- movl (%esi),%ebx /* lsl */
- movl 4(%esi),%eax /* msl */
- xorl %edx,%edx /* extension */
- shrd %cl,%ebx,%edx
- shrd %cl,%eax,%ebx
- shr %cl,%eax
- orl %ebx,%edx
- setne %bl
- test $0x7fffffff,%eax /* only need to look at eax here */
- setne %bh
- orw %bx,%bx
- setne %al
- xorl %edx,%edx
- movl %edx,(%esi) /* set to zero */
- movl %edx,4(%esi) /* set to zero */
- popl %ebx
- popl %esi
- leave
- RET
-
-Ls_more_than_95:
-/* Shift by [96..inf) bits */
- xorl %eax,%eax
- movl (%esi),%ebx
- orl 4(%esi),%ebx
- setne %al
- xorl %ebx,%ebx
- movl %ebx,(%esi)
- movl %ebx,4(%esi)
- popl %ebx
- popl %esi
- leave
- RET
-SYM_FUNC_END(FPU_shrxs)
diff --git a/arch/x86/math-emu/wm_sqrt.S b/arch/x86/math-emu/wm_sqrt.S
deleted file mode 100644
index 40526dd85137..000000000000
--- a/arch/x86/math-emu/wm_sqrt.S
+++ /dev/null
@@ -1,472 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .file "wm_sqrt.S"
-/*---------------------------------------------------------------------------+
- | wm_sqrt.S |
- | |
- | Fixed point arithmetic square root evaluation. |
- | |
- | Copyright (C) 1992,1993,1995,1997 |
- | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, |
- | Australia. E-mail billm@...urbia.net |
- | |
- | Call from C as: |
- | int wm_sqrt(FPU_REG *n, unsigned int control_word) |
- | |
- +---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------+
- | wm_sqrt(FPU_REG *n, unsigned int control_word) |
- | returns the square root of n in n. |
- | |
- | Use Newton's method to compute the square root of a number, which must |
- | be in the range [1.0 .. 4.0), to 64 bits accuracy. |
- | Does not check the sign or tag of the argument. |
- | Sets the exponent, but not the sign or tag of the result. |
- | |
- | The guess is kept in %esi:%edi |
- +---------------------------------------------------------------------------*/
-
-#include "exception.h"
-#include "fpu_emu.h"
-
-
-#ifndef NON_REENTRANT_FPU
-/* Local storage on the stack: */
-#define FPU_accum_3 -4(%ebp) /* ms word */
-#define FPU_accum_2 -8(%ebp)
-#define FPU_accum_1 -12(%ebp)
-#define FPU_accum_0 -16(%ebp)
-
-/*
- * The de-normalised argument:
- * sq_2 sq_1 sq_0
- * b b b b b b b ... b b b b b b .... b b b b 0 0 0 ... 0
- * ^ binary point here
- */
-#define FPU_fsqrt_arg_2 -20(%ebp) /* ms word */
-#define FPU_fsqrt_arg_1 -24(%ebp)
-#define FPU_fsqrt_arg_0 -28(%ebp) /* ls word, at most the ms bit is set */
-
-#else
-/* Local storage in a static area: */
-.data
- .align 4,0
-FPU_accum_3:
- .long 0 /* ms word */
-FPU_accum_2:
- .long 0
-FPU_accum_1:
- .long 0
-FPU_accum_0:
- .long 0
-
-/* The de-normalised argument:
- sq_2 sq_1 sq_0
- b b b b b b b ... b b b b b b .... b b b b 0 0 0 ... 0
- ^ binary point here
- */
-FPU_fsqrt_arg_2:
- .long 0 /* ms word */
-FPU_fsqrt_arg_1:
- .long 0
-FPU_fsqrt_arg_0:
- .long 0 /* ls word, at most the ms bit is set */
-#endif /* NON_REENTRANT_FPU */
-
-
-.text
-SYM_FUNC_START(wm_sqrt)
- pushl %ebp
- movl %esp,%ebp
-#ifndef NON_REENTRANT_FPU
- subl $28,%esp
-#endif /* NON_REENTRANT_FPU */
- pushl %esi
- pushl %edi
- pushl %ebx
-
- movl PARAM1,%esi
-
- movl SIGH(%esi),%eax
- movl SIGL(%esi),%ecx
- xorl %edx,%edx
-
-/* We use a rough linear estimate for the first guess.. */
-
- cmpw EXP_BIAS,EXP(%esi)
- jnz sqrt_arg_ge_2
-
- shrl $1,%eax /* arg is in the range [1.0 .. 2.0) */
- rcrl $1,%ecx
- rcrl $1,%edx
-
-sqrt_arg_ge_2:
-/* From here on, n is never accessed directly again until it is
- replaced by the answer. */
-
- movl %eax,FPU_fsqrt_arg_2 /* ms word of n */
- movl %ecx,FPU_fsqrt_arg_1
- movl %edx,FPU_fsqrt_arg_0
-
-/* Make a linear first estimate */
- shrl $1,%eax
- addl $0x40000000,%eax
- movl $0xaaaaaaaa,%ecx
- mull %ecx
- shll %edx /* max result was 7fff... */
- testl $0x80000000,%edx /* but min was 3fff... */
- jnz sqrt_prelim_no_adjust
-
- movl $0x80000000,%edx /* round up */
-
-sqrt_prelim_no_adjust:
- movl %edx,%esi /* Our first guess */
-
-/* We have now computed (approx) (2 + x) / 3, which forms the basis
- for a few iterations of Newton's method */
-
- movl FPU_fsqrt_arg_2,%ecx /* ms word */
-
-/*
- * From our initial estimate, three iterations are enough to get us
- * to 30 bits or so. This will then allow two iterations at better
- * precision to complete the process.
- */
-
-/* Compute (g + n/g)/2 at each iteration (g is the guess). */
- shrl %ecx /* Doing this first will prevent a divide */
- /* overflow later. */
-
- movl %ecx,%edx /* msw of the arg / 2 */
- divl %esi /* current estimate */
- shrl %esi /* divide by 2 */
- addl %eax,%esi /* the new estimate */
-
- movl %ecx,%edx
- divl %esi
- shrl %esi
- addl %eax,%esi
-
- movl %ecx,%edx
- divl %esi
- shrl %esi
- addl %eax,%esi
-
-/*
- * Now that an estimate accurate to about 30 bits has been obtained (in %esi),
- * we improve it to 60 bits or so.
- *
- * The strategy from now on is to compute new estimates from
- * guess := guess + (n - guess^2) / (2 * guess)
- */
-
-/* First, find the square of the guess */
- movl %esi,%eax
- mull %esi
-/* guess^2 now in %edx:%eax */
-
- movl FPU_fsqrt_arg_1,%ecx
- subl %ecx,%eax
- movl FPU_fsqrt_arg_2,%ecx /* ms word of normalized n */
- sbbl %ecx,%edx
- jnc sqrt_stage_2_positive
-
-/* Subtraction gives a negative result,
- negate the result before division. */
- notl %edx
- notl %eax
- addl $1,%eax
- adcl $0,%edx
-
- divl %esi
- movl %eax,%ecx
-
- movl %edx,%eax
- divl %esi
- jmp sqrt_stage_2_finish
-
-sqrt_stage_2_positive:
- divl %esi
- movl %eax,%ecx
-
- movl %edx,%eax
- divl %esi
-
- notl %ecx
- notl %eax
- addl $1,%eax
- adcl $0,%ecx
-
-sqrt_stage_2_finish:
- sarl $1,%ecx /* divide by 2 */
- rcrl $1,%eax
-
- /* Form the new estimate in %esi:%edi */
- movl %eax,%edi
- addl %ecx,%esi
-
- jnz sqrt_stage_2_done /* result should be [1..2) */
-
-#ifdef PARANOID
-/* It should be possible to get here only if the arg is ffff....ffff */
- cmpl $0xffffffff,FPU_fsqrt_arg_1
- jnz sqrt_stage_2_error
-#endif /* PARANOID */
-
-/* The best rounded result. */
- xorl %eax,%eax
- decl %eax
- movl %eax,%edi
- movl %eax,%esi
- movl $0x7fffffff,%eax
- jmp sqrt_round_result
-
-#ifdef PARANOID
-sqrt_stage_2_error:
- pushl EX_INTERNAL|0x213
- call EXCEPTION
-#endif /* PARANOID */
-
-sqrt_stage_2_done:
-
-/* Now the square root has been computed to better than 60 bits. */
-
-/* Find the square of the guess. */
- movl %edi,%eax /* ls word of guess */
- mull %edi
- movl %edx,FPU_accum_1
-
- movl %esi,%eax
- mull %esi
- movl %edx,FPU_accum_3
- movl %eax,FPU_accum_2
-
- movl %edi,%eax
- mull %esi
- addl %eax,FPU_accum_1
- adcl %edx,FPU_accum_2
- adcl $0,FPU_accum_3
-
-/* movl %esi,%eax */
-/* mull %edi */
- addl %eax,FPU_accum_1
- adcl %edx,FPU_accum_2
- adcl $0,FPU_accum_3
-
-/* guess^2 now in FPU_accum_3:FPU_accum_2:FPU_accum_1 */
-
- movl FPU_fsqrt_arg_0,%eax /* get normalized n */
- subl %eax,FPU_accum_1
- movl FPU_fsqrt_arg_1,%eax
- sbbl %eax,FPU_accum_2
- movl FPU_fsqrt_arg_2,%eax /* ms word of normalized n */
- sbbl %eax,FPU_accum_3
- jnc sqrt_stage_3_positive
-
-/* Subtraction gives a negative result,
- negate the result before division */
- notl FPU_accum_1
- notl FPU_accum_2
- notl FPU_accum_3
- addl $1,FPU_accum_1
- adcl $0,FPU_accum_2
-
-#ifdef PARANOID
- adcl $0,FPU_accum_3 /* This must be zero */
- jz sqrt_stage_3_no_error
-
-sqrt_stage_3_error:
- pushl EX_INTERNAL|0x207
- call EXCEPTION
-
-sqrt_stage_3_no_error:
-#endif /* PARANOID */
-
- movl FPU_accum_2,%edx
- movl FPU_accum_1,%eax
- divl %esi
- movl %eax,%ecx
-
- movl %edx,%eax
- divl %esi
-
- sarl $1,%ecx /* divide by 2 */
- rcrl $1,%eax
-
- /* prepare to round the result */
-
- addl %ecx,%edi
- adcl $0,%esi
-
- jmp sqrt_stage_3_finished
-
-sqrt_stage_3_positive:
- movl FPU_accum_2,%edx
- movl FPU_accum_1,%eax
- divl %esi
- movl %eax,%ecx
-
- movl %edx,%eax
- divl %esi
-
- sarl $1,%ecx /* divide by 2 */
- rcrl $1,%eax
-
- /* prepare to round the result */
-
- notl %eax /* Negate the correction term */
- notl %ecx
- addl $1,%eax
- adcl $0,%ecx /* carry here ==> correction == 0 */
- adcl $0xffffffff,%esi
-
- addl %ecx,%edi
- adcl $0,%esi
-
-sqrt_stage_3_finished:
-
-/*
- * The result in %esi:%edi:%esi should be good to about 90 bits here,
- * and the rounding information here does not have sufficient accuracy
- * in a few rare cases.
- */
- cmpl $0xffffffe0,%eax
- ja sqrt_near_exact_x
-
- cmpl $0x00000020,%eax
- jb sqrt_near_exact
-
- cmpl $0x7fffffe0,%eax
- jb sqrt_round_result
-
- cmpl $0x80000020,%eax
- jb sqrt_get_more_precision
-
-sqrt_round_result:
-/* Set up for rounding operations */
- movl %eax,%edx
- movl %esi,%eax
- movl %edi,%ebx
- movl PARAM1,%edi
- movw EXP_BIAS,EXP(%edi) /* Result is in [1.0 .. 2.0) */
- jmp fpu_reg_round
-
-
-sqrt_near_exact_x:
-/* First, the estimate must be rounded up. */
- addl $1,%edi
- adcl $0,%esi
-
-sqrt_near_exact:
-/*
- * This is an easy case because x^1/2 is monotonic.
- * We need just find the square of our estimate, compare it
- * with the argument, and deduce whether our estimate is
- * above, below, or exact. We use the fact that the estimate
- * is known to be accurate to about 90 bits.
- */
- movl %edi,%eax /* ls word of guess */
- mull %edi
- movl %edx,%ebx /* 2nd ls word of square */
- movl %eax,%ecx /* ls word of square */
-
- movl %edi,%eax
- mull %esi
- addl %eax,%ebx
- addl %eax,%ebx
-
-#ifdef PARANOID
- cmp $0xffffffb0,%ebx
- jb sqrt_near_exact_ok
-
- cmp $0x00000050,%ebx
- ja sqrt_near_exact_ok
-
- pushl EX_INTERNAL|0x214
- call EXCEPTION
-
-sqrt_near_exact_ok:
-#endif /* PARANOID */
-
- or %ebx,%ebx
- js sqrt_near_exact_small
-
- jnz sqrt_near_exact_large
-
- or %ebx,%edx
- jnz sqrt_near_exact_large
-
-/* Our estimate is exactly the right answer */
- xorl %eax,%eax
- jmp sqrt_round_result
-
-sqrt_near_exact_small:
-/* Our estimate is too small */
- movl $0x000000ff,%eax
- jmp sqrt_round_result
-
-sqrt_near_exact_large:
-/* Our estimate is too large, we need to decrement it */
- subl $1,%edi
- sbbl $0,%esi
- movl $0xffffff00,%eax
- jmp sqrt_round_result
-
-
-sqrt_get_more_precision:
-/* This case is almost the same as the above, except we start
- with an extra bit of precision in the estimate. */
- stc /* The extra bit. */
- rcll $1,%edi /* Shift the estimate left one bit */
- rcll $1,%esi
-
- movl %edi,%eax /* ls word of guess */
- mull %edi
- movl %edx,%ebx /* 2nd ls word of square */
- movl %eax,%ecx /* ls word of square */
-
- movl %edi,%eax
- mull %esi
- addl %eax,%ebx
- addl %eax,%ebx
-
-/* Put our estimate back to its original value */
- stc /* The ms bit. */
- rcrl $1,%esi /* Shift the estimate left one bit */
- rcrl $1,%edi
-
-#ifdef PARANOID
- cmp $0xffffff60,%ebx
- jb sqrt_more_prec_ok
-
- cmp $0x000000a0,%ebx
- ja sqrt_more_prec_ok
-
- pushl EX_INTERNAL|0x215
- call EXCEPTION
-
-sqrt_more_prec_ok:
-#endif /* PARANOID */
-
- or %ebx,%ebx
- js sqrt_more_prec_small
-
- jnz sqrt_more_prec_large
-
- or %ebx,%ecx
- jnz sqrt_more_prec_large
-
-/* Our estimate is exactly the right answer */
- movl $0x80000000,%eax
- jmp sqrt_round_result
-
-sqrt_more_prec_small:
-/* Our estimate is too small */
- movl $0x800000ff,%eax
- jmp sqrt_round_result
-
-sqrt_more_prec_large:
-/* Our estimate is too large */
- movl $0x7fffff00,%eax
- jmp sqrt_round_result
-SYM_FUNC_END(wm_sqrt)
--
2.45.2
Powered by blists - more mailing lists