| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250427-awcc-gpio-v2-2-c731373b5d02@gmail.com> Date: Sun, 27 Apr 2025 03:24:49 -0300 From: Kurt Borja via B4 Relay <devnull+kuurtb.gmail.com@...nel.org> To: Hans de Goede <hdegoede@...hat.com>, Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>, Armin Wolf <W_Armin@....de> Cc: Gabriel Marcano <gabemarcano@...oo.com>, platform-driver-x86@...r.kernel.org, Dell.Client.Kernel@...l.com, linux-kernel@...r.kernel.org, Kurt Borja <kuurtb@...il.com> Subject: [PATCH v2 2/2] Documentation: wmi: alienware-wmi: Add GPIO control documentation From: Kurt Borja <kuurtb@...il.com> Add documentation for the GPIO control methods. Signed-off-by: Kurt Borja <kuurtb@...il.com> --- Documentation/wmi/devices/alienware-wmi.rst | 78 +++++++++++++++++++++++++++-- 1 file changed, 74 insertions(+), 4 deletions(-) diff --git a/Documentation/wmi/devices/alienware-wmi.rst b/Documentation/wmi/devices/alienware-wmi.rst index 79238051b18bc5de9b502325017cd5c5fcf41748..2a6052efb9ae0e3fe0a5d9d5775073234dfc96fb 100644 --- a/Documentation/wmi/devices/alienware-wmi.rst +++ b/Documentation/wmi/devices/alienware-wmi.rst @@ -231,6 +231,70 @@ WMI method MemoryOCControl([in] uint32 arg2, [out] uint32 argr) AWCC supports memory overclocking, but this method is very intricate and has not been deciphered yet. +GPIO control Methods +==================== + +Alienware and Dell G Series devices with the AWCC interface usually have an +embedded STM32 RGB lighting controller with USB/HID capabilities. It's vendor ID +is ``187c`` while it's product ID may vary from model to model. + +The control of two GPIO pins of this MCU is exposed as WMI methods for debugging +purposes. + ++--------------+--------------------------------------------------------------+ +| Pin | Description | ++==============+===============================+==============================+ +| 0 | Device Firmware Update (DFU) | **HIGH**: Enables DFU mode | +| | mode pin. | on next MCU boot. | +| | +------------------------------+ +| | | **LOW**: Disables DFU mode | +| | | on next MCU boot. | ++--------------+-------------------------------+------------------------------+ +| 1 | Negative Reset (NRST) pin. | **HIGH**: MCU is ON. | +| | | | +| | +------------------------------+ +| | | **LOW**: MCU is OFF. | +| | | | ++--------------+-------------------------------+------------------------------+ + +See :ref:`acknowledgements` for more information on this MCU. + +.. note:: + Some GPIO control methods break the usual argument structure and take a + **Pin number** instead of an operation on the first byte. + +WMI method FWUpdateGPIOtoggle([in] uint32 arg2, [out] uint32 argr) +------------------------------------------------------------------ + ++--------------------+------------------------------------+--------------------+ +| Operation (Byte 0) | Description | Arguments | ++====================+====================================+====================+ +| Pin number | Set the pin status | - Byte 1: Pin | +| | | status | ++--------------------+------------------------------------+--------------------+ + +WMI method ReadTotalofGPIOs([out] uint32 argr) +---------------------------------------------- + ++--------------------+------------------------------------+--------------------+ +| Operation (Byte 0) | Description | Arguments | ++====================+====================================+====================+ +| 0x00 | Get the total number of GPIOs | - None | ++--------------------+------------------------------------+--------------------+ + +WMI method ReadGPIOpPinStatus([in] uint32 arg2, [out] uint32 argr) +------------------------------------------------------------------ + ++--------------------+------------------------------------+--------------------+ +| Operation (Byte 0) | Description | Arguments | ++====================+====================================+====================+ +| Pin number | Get the pin status | - None | ++--------------------+------------------------------------+--------------------+ + +.. note:: + There known firmware bug in some laptops where reading the status of a pin + also flips it. + Other information Methods ========================= @@ -239,10 +303,16 @@ WMI method ReadChassisColor([out] uint32 argr) Returns the chassis color internal ID. +.. _acknowledgements: + Acknowledgements ================ -Kudos to `AlexIII <https://github.com/AlexIII/tcc-g15>`_ and -`T-Troll <https://github.com/T-Troll/alienfx-tools/>`_ for documenting and -testing some of this device's functionality, making it possible to generalize -this driver. +Kudos to + +* `AlexIII <https://github.com/AlexIII/tcc-g15>`_ +* `T-Troll <https://github.com/T-Troll/alienfx-tools/>`_ +* `Gabriel Marcano <https://gabriel.marcanobrady.family/blog/2024/12/16/dell-g5-5505-se-acpi-or-figuring-out-how-to-reset-the-rgb-controller/>`_ + +for documenting and testing some of this device's functionality, making it +possible to generalize this driver. -- 2.49.0
Powered by blists - more mailing lists