| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e10a3487-f768-4873-a468-7bd2160a325a@gmx.de>
Date: Sun, 27 Apr 2025 03:07:48 +0200
From: Armin Wolf <W_Armin@....de>
To: Kurt Borja <kuurtb@...il.com>, Hans de Goede <hdegoede@...hat.com>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Cc: Gabriel Marcano <gabemarcano@...oo.com>,
platform-driver-x86@...r.kernel.org, Dell.Client.Kernel@...l.com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] platform/x86: alienware-wmi-wmax: Expose GPIO debug
methods
Am 23.04.25 um 09:49 schrieb Kurt Borja:
> Devices with the AWCC interface come with a USB RGB-lighting STM32 MCU,
> which has two GPIO pins with debug capabilities:
>
> - Device Firmware Update mode (DFU)
> - Negative Reset (NRST)
>
> The WMAX device has methods to toggle or read the state of these GPIO
> pins. Expose these methods through DebugFS, hidden behind an unsafe
> module parameter to avoid common users from toying with these without
> consideration.
>
> Suggested-by: Gabriel Marcano <gabemarcano@...oo.com>
> Signed-off-by: Kurt Borja <kuurtb@...il.com>
> ---
> drivers/platform/x86/dell/alienware-wmi-wmax.c | 116 ++++++++++++++++++++++++-
> 1 file changed, 115 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/dell/alienware-wmi-wmax.c b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> index faeddfe3b79e0aa51e7c8c6b23aa4ac5c7218706..2e83be02d7c5f8ca8176f1ec39d9929790da0844 100644
> --- a/drivers/platform/x86/dell/alienware-wmi-wmax.c
> +++ b/drivers/platform/x86/dell/alienware-wmi-wmax.c
> @@ -38,6 +38,9 @@
> #define AWCC_METHOD_GET_FAN_SENSORS 0x13
> #define AWCC_METHOD_THERMAL_INFORMATION 0x14
> #define AWCC_METHOD_THERMAL_CONTROL 0x15
> +#define AWCC_METHOD_FWUP_GPIO_CONTROL 0x20
> +#define AWCC_METHOD_READ_TOTAL_GPIOS 0x21
> +#define AWCC_METHOD_READ_GPIO_STATUS 0x22
> #define AWCC_METHOD_GAME_SHIFT_STATUS 0x25
>
> #define AWCC_FAILURE_CODE 0xFFFFFFFF
> @@ -65,6 +68,10 @@ static bool force_gmode;
> module_param_unsafe(force_gmode, bool, 0);
> MODULE_PARM_DESC(force_gmode, "Forces G-Mode when performance profile is selected");
>
> +static bool gpio_debug;
> +module_param_unsafe(gpio_debug, bool, 0);
> +MODULE_PARM_DESC(gpio_debug, "Exposes GPIO debug methods to DebugFS");
Hi,
personally i thing that you can drop this module parameter. People using DebugFS should
already know that they need to be careful.
Other than that:
Reviewed-by: Armin Wolf <W_Armin@....de>
> +
> struct awcc_quirks {
> bool hwmon;
> bool pprof;
> @@ -217,6 +224,11 @@ enum AWCC_TEMP_SENSOR_TYPES {
> AWCC_TEMP_SENSOR_GPU = 0x06,
> };
>
> +enum AWCC_GPIO_PINS {
> + AWCC_GPIO_PIN_DFU = 0x00,
> + AWCC_GPIO_PIN_NRST = 0x01,
> +};
> +
> enum awcc_thermal_profile {
> AWCC_PROFILE_USTT_BALANCED,
> AWCC_PROFILE_USTT_BALANCED_PERFORMANCE,
> @@ -571,6 +583,38 @@ static int awcc_thermal_information(struct wmi_device *wdev, u8 operation, u8 ar
> return awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out);
> }
>
> +static int awcc_fwup_gpio_control(struct wmi_device *wdev, u8 pin, u8 status)
> +{
> + struct wmax_u32_args args = {
> + .operation = pin,
> + .arg1 = status,
> + .arg2 = 0,
> + .arg3 = 0,
> + };
> + u32 out;
> +
> + return awcc_wmi_command(wdev, AWCC_METHOD_FWUP_GPIO_CONTROL, &args, &out);
> +}
> +
> +static int awcc_read_total_gpios(struct wmi_device *wdev, u32 *count)
> +{
> + struct wmax_u32_args args = {};
> +
> + return awcc_wmi_command(wdev, AWCC_METHOD_READ_TOTAL_GPIOS, &args, count);
> +}
> +
> +static int awcc_read_gpio_status(struct wmi_device *wdev, u8 pin, u32 *status)
> +{
> + struct wmax_u32_args args = {
> + .operation = pin,
> + .arg1 = 0,
> + .arg2 = 0,
> + .arg3 = 0,
> + };
> +
> + return awcc_wmi_command(wdev, AWCC_METHOD_READ_GPIO_STATUS, &args, status);
> +}
> +
> static int awcc_game_shift_status(struct wmi_device *wdev, u8 operation,
> u32 *out)
> {
> @@ -1318,6 +1362,63 @@ static int awcc_debugfs_pprof_data_read(struct seq_file *seq, void *data)
> return 0;
> }
>
> +static int awcc_debugfs_total_gpios_read(struct seq_file *seq, void *data)
> +{
> + struct device *dev = seq->private;
> + struct wmi_device *wdev = to_wmi_device(dev);
> + u32 count;
> + int ret;
> +
> + ret = awcc_read_total_gpios(wdev, &count);
> + if (ret)
> + return ret;
> +
> + seq_printf(seq, "%u\n", count);
> +
> + return 0;
> +}
> +
> +static int awcc_gpio_pin_show(struct seq_file *seq, void *data)
> +{
> + unsigned long pin = debugfs_get_aux_num(seq->file);
> + struct wmi_device *wdev = seq->private;
> + u32 status;
> + int ret;
> +
> + ret = awcc_read_gpio_status(wdev, pin, &status);
> + if (ret)
> + return ret;
> +
> + seq_printf(seq, "%u\n", status);
> +
> + return 0;
> +}
> +
> +static ssize_t awcc_gpio_pin_write(struct file *file, const char __user *buf,
> + size_t count, loff_t *ppos)
> +{
> + unsigned long pin = debugfs_get_aux_num(file);
> + struct seq_file *seq = file->private_data;
> + struct wmi_device *wdev = seq->private;
> + bool status;
> + int ret;
> +
> + if (!ppos || *ppos)
> + return -EINVAL;
> +
> + ret = kstrtobool_from_user(buf, count, &status);
> + if (ret)
> + return ret;
> +
> + ret = awcc_fwup_gpio_control(wdev, pin, status);
> + if (ret)
> + return ret;
> +
> + return count;
> +}
> +
> +DEFINE_SHOW_STORE_ATTRIBUTE(awcc_gpio_pin);
> +
> static void awcc_debugfs_remove(void *data)
> {
> struct dentry *root = data;
> @@ -1327,7 +1428,7 @@ static void awcc_debugfs_remove(void *data)
>
> static void awcc_debugfs_init(struct wmi_device *wdev)
> {
> - struct dentry *root;
> + struct dentry *root, *gpio_ctl;
> char name[64];
>
> scnprintf(name, sizeof(name), "%s-%s", "alienware-wmi", dev_name(&wdev->dev));
> @@ -1344,6 +1445,19 @@ static void awcc_debugfs_init(struct wmi_device *wdev)
> debugfs_create_devm_seqfile(&wdev->dev, "pprof_data", root,
> awcc_debugfs_pprof_data_read);
>
> + if (gpio_debug) {
> + gpio_ctl = debugfs_create_dir("gpio_ctl", root);
> +
> + debugfs_create_devm_seqfile(&wdev->dev, "total_gpios", gpio_ctl,
> + awcc_debugfs_total_gpios_read);
> + debugfs_create_file_aux_num("dfu_pin", 0644, gpio_ctl, wdev,
> + AWCC_GPIO_PIN_DFU,
> + &awcc_gpio_pin_fops);
> + debugfs_create_file_aux_num("nrst_pin", 0644, gpio_ctl, wdev,
> + AWCC_GPIO_PIN_NRST,
> + &awcc_gpio_pin_fops);
> + }
> +
> devm_add_action_or_reset(&wdev->dev, awcc_debugfs_remove, root);
> }
>
>
Powered by blists - more mailing lists