| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250428-b4-k1-dwc3-v2-v1-2-7cb061abd619@whut.edu.cn>
Date: Mon, 28 Apr 2025 15:38:12 +0800
From: Ze Huang <huangze@...t.edu.cn>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Yixun Lan <dlan@...too.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
Alexandre Ghiti <alex@...ti.fr>
Cc: linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org, spacemit@...ts.linux.dev,
linux-kernel@...r.kernel.org, Ze Huang <huangze@...t.edu.cn>
Subject: [PATCH 2/2] riscv: dts: spacemit: add usb3.0 support for K1
Add USB 3.0 support for the SpacemiT K1 SoC, including the
following components:
- USB 2.0 PHY nodes
- USB 3.0 combo PHY node
- USB 3.0 host controller
- USB 3.0 hub and vbus regulator (usb3_vhub, usb3_vbus)
- DRAM interconnect node for USB DMA ("dma-mem")
The `usb3_vbus` and `usb3_vhub` regulator node provides a fixed 5V
supply to power the onboard USB 3.0 hub and usb vbus.
On K1, some DMA transfers from devices to memory use separate buses with
different DMA address translation rules from the parent node. We express
this relationship through the interconnects node("dma-mem").
Signed-off-by: Ze Huang <huangze@...t.edu.cn>
---
arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 52 +++++++++++++++++++++++
arch/riscv/boot/dts/spacemit/k1.dtsi | 56 +++++++++++++++++++++++++
2 files changed, 108 insertions(+)
diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 816ef1bc358ec490aff184d5915d680dbd9f00cb..0c0bf572d31e056955eb2ff377c3262271dcc156 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -28,6 +28,25 @@ led1 {
default-state = "on";
};
};
+
+ usb3_vhub: regulator-vhub-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "USB30_VHUB";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio K1_GPIO(123) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb3_vbus: regulator-vbus-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "USB30_VBUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ gpio = <&gpio K1_GPIO(97) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&uart0 {
@@ -35,3 +54,36 @@ &uart0 {
pinctrl-0 = <&uart0_2_cfg>;
status = "okay";
};
+
+&usbphy2 {
+ status = "okay";
+};
+
+&combphy {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ snps,hsphy_interface = "utmi";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1u2-quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis_rxdet_inp3_quirk;
+ snps,xhci-trb-ent-quirk;
+ vbus-supply = <&usb3_vbus>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub@1 {
+ compatible = "usb2109,817";
+ reg = <0x1>;
+ vdd-supply = <&usb3_vhub>;
+ reset-gpios = <&gpio K1_GPIO(124) GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index c0cc4b99c9356d550a470291dba9f2625b10f8df..c7b86c850da969e5412ad42c63995cd20b4d0484 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -4,6 +4,8 @@
*/
#include <dt-bindings/clock/spacemit,k1-syscon.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
/dts-v1/;
/ {
@@ -346,6 +348,13 @@ soc {
dma-noncoherent;
ranges;
+ dram_range0: dram-range@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+ #interconnect-cells = <0>;
+ };
+
syscon_rcpu: system-controller@...80000 {
compatible = "spacemit,k1-syscon-rcpu";
reg = <0x0 0xc0880000 0x0 0x2048>;
@@ -358,6 +367,53 @@ syscon_rcpu2: system-controller@...88000 {
#reset-cells = <1>;
};
+ usb_dwc3: usb@...00000 {
+ compatible = "spacemit,k1-dwc3", "snps,dwc3";
+ reg = <0x0 0xc0a00000 0x0 0x10000>;
+ clocks = <&syscon_apmu CLK_USB30>;
+ clock-names = "bus_early";
+ resets = <&syscon_apmu RESET_USB3_0>;
+ interrupt-parent = <&plic>;
+ interrupts = <125>;
+ interconnects = <&dram_range0>;
+ interconnect-names = "dma-mem";
+ phys = <&usbphy2>, <&combphy PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ status = "disabled";
+ };
+
+ usbphy0: phy@...40000 {
+ compatible = "spacemit,usb2-phy";
+ reg = <0x0 0xc0940000 0x0 0x200>;
+ clocks = <&syscon_apmu CLK_USB_AXI>;
+ status = "disabled";
+ };
+
+ usbphy1: phy@...c0000 {
+ compatible = "spacemit,usb2-phy";
+ reg = <0x0 0xc09c0000 0x0 0x200>;
+ clocks = <&syscon_apmu CLK_USB_P1>;
+ status = "disabled";
+ };
+
+ usbphy2: phy@...0a30000 {
+ compatible = "spacemit,k1-usb2-phy";
+ reg = <0x0 0xc0a30000 0x0 0x200>;
+ clocks = <&syscon_apmu CLK_USB30>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ combphy: phy@...10000 {
+ compatible = "spacemit,k1-combphy";
+ reg = <0x0 0xc0b10000 0x0 0x800>,
+ <0x0 0xd4282910 0x0 0x400>;
+ reg-names = "ctrl", "sel";
+ resets = <&syscon_apmu RESET_PCIE0>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
syscon_apbc: system-control@...15000 {
compatible = "spacemit,k1-syscon-apbc";
reg = <0x0 0xd4015000 0x0 0x1000>;
--
2.49.0
Powered by blists - more mailing lists