| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHUa44GFFUAPRSDUzp-LJ8DZgsbAzNs3ZueA3wkePP4zqG9Z3A@mail.gmail.com>
Date: Mon, 28 Apr 2025 10:14:48 +0200
From: Jens Wiklander <jens.wiklander@...aro.org>
To: Rouven Czerwinski <rouven.czerwinski@...aro.org>
Cc: linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linaro-mm-sig@...ts.linaro.org,
op-tee@...ts.trustedfirmware.org, linux-arm-kernel@...ts.infradead.org,
Olivier Masse <olivier.masse@....com>, Thierry Reding <thierry.reding@...il.com>,
Yong Wu <yong.wu@...iatek.com>, Sumit Semwal <sumit.semwal@...aro.org>,
Benjamin Gaignard <benjamin.gaignard@...labora.com>, Brian Starkey <Brian.Starkey@....com>,
John Stultz <jstultz@...gle.com>, "T . J . Mercier" <tjmercier@...gle.com>,
Christian König <christian.koenig@....com>,
Sumit Garg <sumit.garg@...nel.org>, Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, azarrabi@....qualcomm.com,
Simona Vetter <simona.vetter@...ll.ch>, Daniel Stone <daniel@...ishbar.org>
Subject: Re: [PATCH v7 04/11] optee: sync secure world ABI headers
Hi Rouven,
On Fri, Apr 25, 2025 at 3:36 PM Rouven Czerwinski
<rouven.czerwinski@...aro.org> wrote:
>
> Hi,
>
> On Fri, 4 Apr 2025 at 16:31, Jens Wiklander <jens.wiklander@...aro.org> wrote:
> >
> > Update the header files describing the secure world ABI, both with and
> > without FF-A. The ABI is extended to deal with protected memory, but as
> > usual backward compatible.
> >
> > Signed-off-by: Jens Wiklander <jens.wiklander@...aro.org>
> > ---
> > drivers/tee/optee/optee_ffa.h | 27 +++++++++---
> > drivers/tee/optee/optee_msg.h | 83 ++++++++++++++++++++++++++++++-----
> > drivers/tee/optee/optee_smc.h | 71 +++++++++++++++++++++++++++++-
> > 3 files changed, 163 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/tee/optee/optee_ffa.h b/drivers/tee/optee/optee_ffa.h
> > index 257735ae5b56..cc257e7956a3 100644
> > --- a/drivers/tee/optee/optee_ffa.h
> > +++ b/drivers/tee/optee/optee_ffa.h
> > @@ -81,7 +81,7 @@
> > * as the second MSG arg struct for
> > * OPTEE_FFA_YIELDING_CALL_WITH_ARG.
> > * Bit[31:8]: Reserved (MBZ)
> > - * w5: Bitfield of secure world capabilities OPTEE_FFA_SEC_CAP_* below,
> > + * w5: Bitfield of OP-TEE capabilities OPTEE_FFA_SEC_CAP_*
> > * w6: The maximum secure world notification number
> > * w7: Not used (MBZ)
> > */
> > @@ -94,6 +94,8 @@
> > #define OPTEE_FFA_SEC_CAP_ASYNC_NOTIF BIT(1)
> > /* OP-TEE supports probing for RPMB device if needed */
> > #define OPTEE_FFA_SEC_CAP_RPMB_PROBE BIT(2)
> > +/* OP-TEE supports Protected Memory for secure data path */
> > +#define OPTEE_FFA_SEC_CAP_PROTMEM BIT(3)
> >
> > #define OPTEE_FFA_EXCHANGE_CAPABILITIES OPTEE_FFA_BLOCKING_CALL(2)
> >
> > @@ -108,7 +110,7 @@
> > *
> > * Return register usage:
> > * w3: Error code, 0 on success
> > - * w4-w7: Note used (MBZ)
> > + * w4-w7: Not used (MBZ)
> > */
> > #define OPTEE_FFA_UNREGISTER_SHM OPTEE_FFA_BLOCKING_CALL(3)
> >
> > @@ -119,16 +121,31 @@
> > * Call register usage:
> > * w3: Service ID, OPTEE_FFA_ENABLE_ASYNC_NOTIF
> > * w4: Notification value to request bottom half processing, should be
> > - * less than OPTEE_FFA_MAX_ASYNC_NOTIF_VALUE.
> > + * less than OPTEE_FFA_MAX_ASYNC_NOTIF_VALUE
> > * w5-w7: Not used (MBZ)
> > *
> > * Return register usage:
> > * w3: Error code, 0 on success
> > - * w4-w7: Note used (MBZ)
> > + * w4-w7: Not used (MBZ)
> > */
> > #define OPTEE_FFA_ENABLE_ASYNC_NOTIF OPTEE_FFA_BLOCKING_CALL(5)
> >
> > -#define OPTEE_FFA_MAX_ASYNC_NOTIF_VALUE 64
> > +#define OPTEE_FFA_MAX_ASYNC_NOTIF_VALUE 64
> > +
> > +/*
> > + * Release Protected memory
> > + *
> > + * Call register usage:
> > + * w3: Service ID, OPTEE_FFA_RECLAIM_PROTMEM
> > + * w4: Shared memory handle, lower bits
> > + * w5: Shared memory handle, higher bits
> > + * w6-w7: Not used (MBZ)
> > + *
> > + * Return register usage:
> > + * w3: Error code, 0 on success
> > + * w4-w7: Note used (MBZ)
> > + */
> > +#define OPTEE_FFA_RELEASE_PROTMEM OPTEE_FFA_BLOCKING_CALL(8)
> >
> > /*
> > * Call with struct optee_msg_arg as argument in the supplied shared memory
> > diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
> > index e8840a82b983..22d71d6f110d 100644
> > --- a/drivers/tee/optee/optee_msg.h
> > +++ b/drivers/tee/optee/optee_msg.h
> > @@ -133,13 +133,13 @@ struct optee_msg_param_rmem {
> > };
> >
> > /**
> > - * struct optee_msg_param_fmem - ffa memory reference parameter
> > + * struct optee_msg_param_fmem - FF-A memory reference parameter
> > * @offs_lower: Lower bits of offset into shared memory reference
> > * @offs_upper: Upper bits of offset into shared memory reference
> > * @internal_offs: Internal offset into the first page of shared memory
> > * reference
> > * @size: Size of the buffer
> > - * @global_id: Global identifier of Shared memory
> > + * @global_id: Global identifier of the shared memory
> > */
> > struct optee_msg_param_fmem {
> > u32 offs_low;
> > @@ -165,7 +165,7 @@ struct optee_msg_param_value {
> > * @attr: attributes
> > * @tmem: parameter by temporary memory reference
> > * @rmem: parameter by registered memory reference
> > - * @fmem: parameter by ffa registered memory reference
> > + * @fmem: parameter by FF-A registered memory reference
> > * @value: parameter by opaque value
> > * @octets: parameter by octet string
> > *
> > @@ -296,6 +296,18 @@ struct optee_msg_arg {
> > */
> > #define OPTEE_MSG_FUNCID_GET_OS_REVISION 0x0001
> >
> > +/*
> > + * Values used in OPTEE_MSG_CMD_LEND_PROTMEM below
> > + * OPTEE_MSG_PROTMEM_RESERVED Reserved
> > + * OPTEE_MSG_PROTMEM_SECURE_VIDEO_PLAY Secure Video Playback
> > + * OPTEE_MSG_PROTMEM_TRUSTED_UI Trused UI
> > + * OPTEE_MSG_PROTMEM_SECURE_VIDEO_RECORD Secure Video Recording
> > + */
> > +#define OPTEE_MSG_PROTMEM_RESERVED 0
> > +#define OPTEE_MSG_PROTMEM_SECURE_VIDEO_PLAY 1
> > +#define OPTEE_MSG_PROTMEM_TRUSTED_UI 2
> > +#define OPTEE_MSG_PROTMEM_SECURE_VIDEO_RECORD 3
> > +
> > /*
> > * Do a secure call with struct optee_msg_arg as argument
> > * The OPTEE_MSG_CMD_* below defines what goes in struct optee_msg_arg::cmd
> > @@ -337,15 +349,62 @@ struct optee_msg_arg {
> > * OPTEE_MSG_CMD_STOP_ASYNC_NOTIF informs secure world that from now is
> > * normal world unable to process asynchronous notifications. Typically
> > * used when the driver is shut down.
> > + *
> > + * OPTEE_MSG_CMD_LEND_PROTMEM lends protected memory. The passed normal
> > + * physical memory is protected from normal world access. The memory
> > + * should be unmapped prior to this call since it becomes inaccessible
> > + * during the request.
> > + * Parameters are passed as:
> > + * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_VALUE_INPUT
> > + * [in] param[0].u.value.a OPTEE_MSG_PROTMEM_* defined above
> > + * [in] param[1].attr OPTEE_MSG_ATTR_TYPE_TMEM_INPUT
> > + * [in] param[1].u.tmem.buf_ptr physical address
> > + * [in] param[1].u.tmem.size size
> > + * [in] param[1].u.tmem.shm_ref holds protected memory reference
> > + *
> > + * OPTEE_MSG_CMD_RECLAIM_PROTMEM reclaims a previously lent protected
> > + * memory reference. The physical memory is accessible by the normal world
> > + * after this function has return and can be mapped again. The information
> > + * is passed as:
> > + * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_VALUE_INPUT
> > + * [in] param[0].u.value.a holds protected memory cookie
> > + *
> > + * OPTEE_MSG_CMD_GET_PROTMEM_CONFIG get configuration for a specific
> > + * protected memory use case. Parameters are passed as:
> > + * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_VALUE_INOUT
> > + * [in] param[0].value.a OPTEE_MSG_PROTMEM_*
> > + * [in] param[1].attr OPTEE_MSG_ATTR_TYPE_{R,F}MEM_OUTPUT
> > + * [in] param[1].u.{r,f}mem Buffer or NULL
> > + * [in] param[1].u.{r,f}mem.size Provided size of buffer or 0 for query
> > + * output for the protected use case:
> > + * [out] param[0].value.a Minimal size of protected memory
> > + * [out] param[0].value.b Required alignment of size and start of
> > + * protected memory
> > + * [out] param[1].{r,f}mem.size Size of output data
> > + * [out] param[1].{r,f}mem If non-NULL, contains an array of
> > + * uint16_t holding endpoints that
> > + * must be included when lending
> > + * memory for this use case
> > + *
> > + * OPTEE_MSG_CMD_ASSIGN_PROTMEM assigns use-case to protected memory
> > + * previously lent using the FFA_LEND framework ABI. Parameters are passed
> > + * as:
> > + * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_VALUE_INPUT
> > + * [in] param[0].u.value.a holds protected memory cookie
> > + * [in] param[0].u.value.b OPTEE_MSG_PROTMEM_* defined above
> > */
> > -#define OPTEE_MSG_CMD_OPEN_SESSION 0
> > -#define OPTEE_MSG_CMD_INVOKE_COMMAND 1
> > -#define OPTEE_MSG_CMD_CLOSE_SESSION 2
> > -#define OPTEE_MSG_CMD_CANCEL 3
> > -#define OPTEE_MSG_CMD_REGISTER_SHM 4
> > -#define OPTEE_MSG_CMD_UNREGISTER_SHM 5
> > -#define OPTEE_MSG_CMD_DO_BOTTOM_HALF 6
> > -#define OPTEE_MSG_CMD_STOP_ASYNC_NOTIF 7
> > -#define OPTEE_MSG_FUNCID_CALL_WITH_ARG 0x0004
> > +#define OPTEE_MSG_CMD_OPEN_SESSION 0
> > +#define OPTEE_MSG_CMD_INVOKE_COMMAND 1
> > +#define OPTEE_MSG_CMD_CLOSE_SESSION 2
> > +#define OPTEE_MSG_CMD_CANCEL 3
> > +#define OPTEE_MSG_CMD_REGISTER_SHM 4
> > +#define OPTEE_MSG_CMD_UNREGISTER_SHM 5
> > +#define OPTEE_MSG_CMD_DO_BOTTOM_HALF 6
> > +#define OPTEE_MSG_CMD_STOP_ASYNC_NOTIF 7
> > +#define OPTEE_MSG_CMD_LEND_PROTMEM 8
> > +#define OPTEE_MSG_CMD_RECLAIM_PROTMEM 9
> > +#define OPTEE_MSG_CMD_GET_PROTMEM_CONFIG 10
> > +#define OPTEE_MSG_CMD_ASSIGN_PROTMEM 11
> > +#define OPTEE_MSG_FUNCID_CALL_WITH_ARG 0x0004
> >
> > #endif /* _OPTEE_MSG_H */
> > diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
> > index 879426300821..b17e81f464a3 100644
> > --- a/drivers/tee/optee/optee_smc.h
> > +++ b/drivers/tee/optee/optee_smc.h
> > @@ -264,7 +264,6 @@ struct optee_smc_get_shm_config_result {
> > #define OPTEE_SMC_SEC_CAP_HAVE_RESERVED_SHM BIT(0)
> > /* Secure world can communicate via previously unregistered shared memory */
> > #define OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM BIT(1)
> > -
> > /*
> > * Secure world supports commands "register/unregister shared memory",
> > * secure world accepts command buffers located in any parts of non-secure RAM
> > @@ -280,6 +279,10 @@ struct optee_smc_get_shm_config_result {
> > #define OPTEE_SMC_SEC_CAP_RPC_ARG BIT(6)
> > /* Secure world supports probing for RPMB device if needed */
> > #define OPTEE_SMC_SEC_CAP_RPMB_PROBE BIT(7)
> > +/* Secure world supports protected memory */
> > +#define OPTEE_SMC_SEC_CAP_PROTMEM BIT(8)
> > +/* Secure world supports dynamic protected memory */
> > +#define OPTEE_SMC_SEC_CAP_DYNAMIC_PROTMEM BIT(9)
> >
> > #define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9
> > #define OPTEE_SMC_EXCHANGE_CAPABILITIES \
> > @@ -451,6 +454,72 @@ struct optee_smc_disable_shm_cache_result {
> >
> > /* See OPTEE_SMC_CALL_WITH_REGD_ARG above */
> > #define OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG 19
> > +/*
> > + * Get protected memory config
> > + *
> > + * Returns the protected memory config.
> > + *
> > + * Call register usage:
> > + * a0 SMC Function ID, OPTEE_SMC_GET_PROTMEM_CONFIG
> > + * a2-6 Not used, must be zero
> > + * a7 Hypervisor Client ID register
> > + *
> > + * Have config return register usage:
> > + * a0 OPTEE_SMC_RETURN_OK
> > + * a1 Physical address of start of protected memory
> > + * a2 Size of protected memory
> > + * a3 Not used
> > + * a4-7 Preserved
> > + *
> > + * Not available register usage:
> > + * a0 OPTEE_SMC_RETURN_ENOTAVAIL
> > + * a1-3 Not used
> > + * a4-7 Preserved
> > + */
> > +#define OPTEE_SMC_FUNCID_GET_PROTMEM_CONFIG 20
> > +#define OPTEE_SMC_GET_PROTMEM_CONFIG \
> > + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_PROTMEM_CONFIG)
> > +
> > +struct optee_smc_get_protmem_config_result {
> > + unsigned long status;
> > + unsigned long start;
> > + unsigned long size;
> > + unsigned long flags;
>
> The ABI comment does not document a flags return argument, either
> this can be removed or the ABI comment needs to be fixed.
Sure, I'll remove the field.
> Same for
> > +};
> > +
> > +/*
> > + * Get dynamic protected memory config
> > + *
> > + * Returns the dynamic protected memory config.
> > + *
> > + * Call register usage:
> > + * a0 SMC Function ID, OPTEE_SMC_GET_DYN_SHM_CONFIG
>
> should be OPTEE_SMC_GET_DYN_PROTMEM_CONFIG
Thanks, I'll update.
>
> > + * a2-6 Not used, must be zero
> > + * a7 Hypervisor Client ID register
> > + *
> > + * Have config return register usage:
> > + * a0 OPTEE_SMC_RETURN_OK
> > + * a1 Minamal size of protected memory
>
> Nit: Typo, should be "Minimal"
Yes, I'll update.
Cheers,
Jens
>
> > + * a2 Required alignment of size and start of registered protected memory
> > + * a3 Not used
> > + * a4-7 Preserved
> > + *
> > + * Not available register usage:
> > + * a0 OPTEE_SMC_RETURN_ENOTAVAIL
> > + * a1-3 Not used
> > + * a4-7 Preserved
> > + */
> > +
> > +#define OPTEE_SMC_FUNCID_GET_DYN_PROTMEM_CONFIG 21
> > +#define OPTEE_SMC_GET_DYN_PROTMEM_CONFIG \
> > + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_DYN_PROTMEM_CONFIG)
> > +
> > +struct optee_smc_get_dyn_protmem_config_result {
> > + unsigned long status;
> > + unsigned long size;
> > + unsigned long align;
> > + unsigned long flags;
> > +};
> >
> > /*
> > * Resume from RPC (for example after processing a foreign interrupt)
> > --
> > 2.43.0
>
> - Rouven
Powered by blists - more mailing lists