| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250429003606.303870-4-W_Armin@gmx.de>
Date: Tue, 29 Apr 2025 02:36:06 +0200
From: Armin Wolf <W_Armin@....de>
To: hdegoede@...hat.com,
ilpo.jarvinen@...ux.intel.com
Cc: sre@...nel.org,
platform-driver-x86@...r.kernel.org,
linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 4/4] platform/x86: dell-ddv: Expose the battery health to userspace
The health of a given battery is exposed over the Dell DDV WMI
interface using the "BatteryManufactureAceess" WMI method. The
resulting data contains, among other data, the health status of
the battery.
Expose this value to userspace using the power supply extension
interface.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@....de>
---
Documentation/wmi/devices/dell-wmi-ddv.rst | 35 ++++++++-
drivers/platform/x86/dell/dell-wmi-ddv.c | 89 ++++++++++++++++++++++
2 files changed, 123 insertions(+), 1 deletion(-)
diff --git a/Documentation/wmi/devices/dell-wmi-ddv.rst b/Documentation/wmi/devices/dell-wmi-ddv.rst
index 41c553d5c77d..109d4c5c922e 100644
--- a/Documentation/wmi/devices/dell-wmi-ddv.rst
+++ b/Documentation/wmi/devices/dell-wmi-ddv.rst
@@ -150,7 +150,40 @@ Returns the voltage flow of the battery in mV as an u16.
WMI method BatteryManufactureAccess()
-------------------------------------
-Returns a manufacture-defined value as an u16.
+Returns the health status of the battery as a u16.
+The health status encoded in the following manner:
+
+ - the third nibble contains the general failure mode
+ - the fourth nibble contains the specific failure code
+
+Valid failure modes are:
+
+ - permanent failure (``0x9``)
+ - overheat failure (``0xa``)
+ - overcurrent failure (``0xb``)
+
+All other failure modes are to be considered normal.
+
+The following failure codes are valid for a permanent failure:
+
+ - fuse blown (``0x0``)
+ - cell imbalance (``0x1``)
+ - overvoltage (``0x2``)
+ - fet failure (``0x3``)
+
+The last two bits of the failure code are to be ignored when the battery
+signals a permanent failure.
+
+The following failure codes a valid for a overheat failure:
+
+ - overheat at start of charging (``0x5``)
+ - overheat during charging (``0x7``)
+ - overheat during discharging (``0x8``)
+
+The following failure codes are valid for a overcurrent failure:
+
+ - overcurrent during charging (``0x6``)
+ - overcurrent during discharging (``0xb``)
WMI method BatteryRelativeStateOfCharge()
-----------------------------------------
diff --git a/drivers/platform/x86/dell/dell-wmi-ddv.c b/drivers/platform/x86/dell/dell-wmi-ddv.c
index 8bd3ff76bb91..cb4e0c1b908e 100644
--- a/drivers/platform/x86/dell/dell-wmi-ddv.c
+++ b/drivers/platform/x86/dell/dell-wmi-ddv.c
@@ -47,6 +47,26 @@
#define SBS_MANUFACTURE_MONTH_MASK GENMASK(8, 5)
#define SBS_MANUFACTURE_DAY_MASK GENMASK(4, 0)
+#define MA_FAILURE_MODE_MASK GENMASK(11, 8)
+#define MA_FAILURE_MODE_PERMANENT 0x9
+#define MA_FAILURE_MODE_OVERHEAT 0xA
+#define MA_FAILURE_MODE_OVERCURRENT 0xB
+
+#define MA_PERMANENT_FAILURE_CODE_MASK GENMASK(13, 12)
+#define MA_PERMANENT_FAILURE_FUSE_BLOWN 0x0
+#define MA_PERMANENT_FAILURE_CELL_IMBALANCE 0x1
+#define MA_PERMANENT_FAILURE_OVERVOLTAGE 0x2
+#define MA_PERMANENT_FAILURE_FET_FAILURE 0x3
+
+#define MA_OVERHEAT_FAILURE_CODE_MASK GENMASK(15, 12)
+#define MA_OVERHEAT_FAILURE_START 0x5
+#define MA_OVERHEAT_FAILURE_CHARGING 0x7
+#define MA_OVERHEAT_FAILURE_DISCHARGING 0x8
+
+#define MA_OVERCURRENT_FAILURE_CODE_MASK GENMASK(15, 12)
+#define MA_OVERCURRENT_FAILURE_CHARGING 0x6
+#define MA_OVERCURRENT_FAILURE_DISCHARGING 0xB
+
#define DELL_EPPID_LENGTH 20
#define DELL_EPPID_EXT_LENGTH 23
@@ -749,6 +769,72 @@ static ssize_t eppid_show(struct device *dev, struct device_attribute *attr, cha
return ret;
}
+static int dell_wmi_ddv_get_health(struct dell_wmi_ddv_data *data, u32 index,
+ union power_supply_propval *val)
+{
+ u32 value, code;
+ int ret;
+
+ ret = dell_wmi_ddv_query_integer(data->wdev, DELL_DDV_BATTERY_MANUFACTURER_ACCESS, index,
+ &value);
+ if (ret < 0)
+ return ret;
+
+ switch (FIELD_GET(MA_FAILURE_MODE_MASK, value)) {
+ case MA_FAILURE_MODE_PERMANENT:
+ code = FIELD_GET(MA_PERMANENT_FAILURE_CODE_MASK, value);
+ switch (code) {
+ case MA_PERMANENT_FAILURE_FUSE_BLOWN:
+ val->intval = POWER_SUPPLY_HEALTH_BLOWN_FUSE;
+ return 0;
+ case MA_PERMANENT_FAILURE_CELL_IMBALANCE:
+ val->intval = POWER_SUPPLY_HEALTH_CELL_IMBALANCE;
+ return 0;
+ case MA_PERMANENT_FAILURE_OVERVOLTAGE:
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ return 0;
+ case MA_PERMANENT_FAILURE_FET_FAILURE:
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ return 0;
+ default:
+ dev_notice_once(&data->wdev->dev, "Unknown permanent failure code %u\n",
+ code);
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ return 0;
+ }
+ case MA_FAILURE_MODE_OVERHEAT:
+ code = FIELD_GET(MA_OVERHEAT_FAILURE_CODE_MASK, value);
+ switch (code) {
+ case MA_OVERHEAT_FAILURE_START:
+ case MA_OVERHEAT_FAILURE_CHARGING:
+ case MA_OVERHEAT_FAILURE_DISCHARGING:
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ return 0;
+ default:
+ dev_notice_once(&data->wdev->dev, "Unknown overheat failure code %u\n",
+ code);
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ return 0;
+ }
+ case MA_FAILURE_MODE_OVERCURRENT:
+ code = FIELD_GET(MA_OVERCURRENT_FAILURE_CODE_MASK, value);
+ switch (code) {
+ case MA_OVERCURRENT_FAILURE_CHARGING:
+ case MA_OVERCURRENT_FAILURE_DISCHARGING:
+ val->intval = POWER_SUPPLY_HEALTH_OVERCURRENT;
+ return 0;
+ default:
+ dev_notice_once(&data->wdev->dev, "Unknown overcurrent failure code %u\n",
+ code);
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ return 0;
+ }
+ default:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ return 0;
+ }
+}
+
static int dell_wmi_ddv_get_manufacture_date(struct dell_wmi_ddv_data *data, u32 index,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -808,6 +894,8 @@ static int dell_wmi_ddv_get_property(struct power_supply *psy, const struct powe
return ret;
switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ return dell_wmi_ddv_get_health(data, index, val);
case POWER_SUPPLY_PROP_TEMP:
ret = dell_wmi_ddv_query_integer(data->wdev, DELL_DDV_BATTERY_TEMPERATURE, index,
&value);
@@ -829,6 +917,7 @@ static int dell_wmi_ddv_get_property(struct power_supply *psy, const struct powe
}
static const enum power_supply_property dell_wmi_ddv_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
--
2.39.5
Powered by blists - more mailing lists