| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <794684867.1172961.1745921482649.JavaMail.zimbra@couthit.local>
Date: Tue, 29 Apr 2025 15:41:22 +0530 (IST)
From: Parvathi Pudi <parvathi@...thit.com>
To: robh <robh@...nel.org>
Cc: parvathi <parvathi@...thit.com>, danishanwar <danishanwar@...com>,
rogerq <rogerq@...nel.org>, andrew+netdev <andrew+netdev@...n.ch>,
davem <davem@...emloft.net>, edumazet <edumazet@...gle.com>,
kuba <kuba@...nel.org>, pabeni <pabeni@...hat.com>,
krzk+dt <krzk+dt@...nel.org>, conor+dt <conor+dt@...nel.org>,
nm <nm@...com>, ssantosh <ssantosh@...nel.org>,
tony <tony@...mide.com>, richardcochran <richardcochran@...il.com>,
glaroque <glaroque@...libre.com>, schnelle <schnelle@...ux.ibm.com>,
m-karicheri2 <m-karicheri2@...com>, s hauer <s.hauer@...gutronix.de>,
rdunlap <rdunlap@...radead.org>, diogo ivo <diogo.ivo@...mens.com>,
basharath <basharath@...thit.com>, horms <horms@...nel.org>,
jacob e keller <jacob.e.keller@...el.com>,
m-malladi <m-malladi@...com>,
javier carrasco cruz <javier.carrasco.cruz@...il.com>,
afd <afd@...com>, s-anna <s-anna@...com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
netdev <netdev@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
pratheesh <pratheesh@...com>, Prajith Jayarajan <prajith@...com>,
Vignesh Raghavendra <vigneshr@...com>, praneeth <praneeth@...com>,
srk <srk@...com>, rogerq <rogerq@...com>,
krishna <krishna@...thit.com>, pmohan <pmohan@...thit.com>,
mohan <mohan@...thit.com>
Subject: Re: [PATCH net-next v6 01/11] dt-bindings: net: ti: Adds DUAL-EMAC
mode support on PRU-ICSS2 for AM57xx, AM43xx and AM33xx SOCs
Hi,
> On Wed, Apr 23, 2025 at 11:36:57AM +0530, Parvathi Pudi wrote:
>> Documentation update for the newly added "pruss2_eth" device tree
>> node and its dependencies along with compatibility for PRU-ICSS
>> Industrial Ethernet Peripheral (IEP), PRU-ICSS Enhanced Capture
>> (eCAP) peripheral and using YAML binding document for AM57xx SoCs.
>>
>> Co-developed-by: Basharath Hussain Khaja <basharath@...thit.com>
>> Signed-off-by: Basharath Hussain Khaja <basharath@...thit.com>
>> Signed-off-by: Parvathi Pudi <parvathi@...thit.com>
>> ---
>> .../devicetree/bindings/net/ti,icss-iep.yaml | 10 +-
>> .../bindings/net/ti,icssm-prueth.yaml | 233 ++++++++++++++++++
>> .../bindings/net/ti,pruss-ecap.yaml | 32 +++
>> .../devicetree/bindings/soc/ti/ti,pruss.yaml | 9 +
>> 4 files changed, 281 insertions(+), 3 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
>> create mode 100644 Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
>> b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
>> index e36e3a622904..ea2659d90a52 100644
>> --- a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
>> +++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
>> @@ -8,6 +8,8 @@ title: Texas Instruments ICSS Industrial Ethernet Peripheral
>> (IEP) module
>>
>> maintainers:
>> - Md Danish Anwar <danishanwar@...com>
>> + - Parvathi Pudi <parvathi@...thit.com>
>> + - Basharath Hussain Khaja <basharath@...thit.com>
>>
>> properties:
>> compatible:
>> @@ -17,9 +19,11 @@ properties:
>> - ti,am642-icss-iep
>> - ti,j721e-icss-iep
>> - const: ti,am654-icss-iep
>> -
>> - - const: ti,am654-icss-iep
>> -
>> + - enum:
>> + - ti,am654-icss-iep
>> + - ti,am5728-icss-iep
>> + - ti,am4376-icss-iep
>> + - ti,am3356-icss-iep
>>
>> reg:
>> maxItems: 1
>> diff --git a/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
>> b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
>> new file mode 100644
>> index 000000000000..d42aea70eb76
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
>> @@ -0,0 +1,233 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/ti,icssm-prueth.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments ICSSM PRUSS Ethernet
>> +
>> +maintainers:
>> + - Roger Quadros <rogerq@...com>
>> + - Andrew F. Davis <afd@...com>
>> + - Parvathi Pudi <parvathi@...thit.com>
>> + - Basharath Hussain Khaja <basharath@...thit.com>
>> +
>> +description:
>> + Ethernet based on the Programmable Real-Time Unit and Industrial
>> + Communication Subsystem.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - ti,am57-prueth # for AM57x SoC family
>> + - ti,am4376-prueth # for AM43x SoC family
>> + - ti,am3359-prueth # for AM33x SoC family
>> +
>> + sram:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description:
>> + phandle to OCMC SRAM node
>> +
>> + ti,mii-rt:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description:
>> + phandle to MII_RT module's syscon regmap
>
> regmap is a Linuxism. Say what functionality you need from this block.
>
Sure, we will update the documentation in the next version.
>> +
>> + ti,iep:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description:
>> + phandle to IEP (Industrial Ethernet Peripheral) for ICSS
>> +
>> + ti,ecap:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description:
>> + phandle to Enhanced Capture (eCAP) event for ICSS
>> +
>> + interrupts:
>> + items:
>> + - description: High priority Rx Interrupt specifier.
>> + - description: Low priority Rx Interrupt specifier.
>> +
>> + interrupt-names:
>> + items:
>> + - const: rx_hp
>> + - const: rx_lp
>> +
>> + ethernet-ports:
>> + type: object
>> + additionalProperties: false
>> +
>> + properties:
>> + '#address-cells':
>> + const: 1
>> + '#size-cells':
>> + const: 0
>> +
>> + patternProperties:
>> + ^ethernet-port@[0-1]$:
>> + type: object
>> + description: ICSSM PRUETH external ports
>> + $ref: ethernet-controller.yaml#
>> + unevaluatedProperties: false
>> +
>> + properties:
>> + reg:
>> + items:
>> + - enum: [0, 1]
>> + description: ICSSM PRUETH port number
>> +
>> + interrupts:
>> + maxItems: 3
>> +
>> + interrupt-names:
>> + items:
>> + - const: rx
>> + - const: emac_ptp_tx
>> + - const: hsr_ptp_tx
>> +
>> + required:
>> + - reg
>> +
>> + anyOf:
>> + - required:
>> + - ethernet-port@0
>> + - required:
>> + - ethernet-port@1
>> +
>> +required:
>> + - compatible
>> + - sram
>> + - ti,mii-rt
>> + - ti,iep
>> + - ti,ecap
>> + - ethernet-ports
>> + - interrupts
>> + - interrupt-names
>> +
>> +allOf:
>> + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + /* Dual-MAC Ethernet application node on PRU-ICSS2 */
>> + pruss2_eth: pruss2-eth {
>
> Drop unused labels.
>
"pruss2_eth" label is the primary node of the PRU-ICSS2 and
PRUETH driver is referring to this label. A name followed by a
label is required. Do we need to rename "pruss2-eth" to any
other? if we try to remove the name, we expected to see a
syntax error.
>> + compatible = "ti,am57-prueth";
>> + ti,prus = <&pru2_0>, <&pru2_1>;
>> + sram = <&ocmcram1>;
>> + ti,mii-rt = <&pruss2_mii_rt>;
>> + ti,iep = <&pruss2_iep>;
>> + ti,ecap = <&pruss2_ecap>;
>> + interrupts = <20 2 2>, <21 3 3>;
>> + interrupt-names = "rx_hp", "rx_lp";
>> + interrupt-parent = <&pruss2_intc>;
>> +
>> + ethernet-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pruss2_emac0: ethernet-port@0 {
>> + reg = <0>;
>> + phy-handle = <&pruss2_eth0_phy>;
>> + phy-mode = "mii";
>> + interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
>> + interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
>> + /* Filled in by bootloader */
>> + local-mac-address = [00 00 00 00 00 00];
>> + };
>> +
>> + pruss2_emac1: ethernet-port@1 {
>> + reg = <1>;
>> + phy-handle = <&pruss2_eth1_phy>;
>> + phy-mode = "mii";
>> + interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
>> + interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
>> + /* Filled in by bootloader */
>> + local-mac-address = [00 00 00 00 00 00];
>> + };
>> + };
>> + };
>> + - |
>> + /* Dual-MAC Ethernet application node on PRU-ICSS1 */
>> + pruss1_eth: pruss1-eth {
>> + compatible = "ti,am4376-prueth";
>> + ti,prus = <&pru1_0>, <&pru1_1>;
>> + sram = <&ocmcram>;
>> + ti,mii-rt = <&pruss1_mii_rt>;
>> + ti,iep = <&pruss1_iep>;
>> + ti,ecap = <&pruss1_ecap>;
>> + interrupts = <20 2 2>, <21 3 3>;
>> + interrupt-names = "rx_hp", "rx_lp";
>> + interrupt-parent = <&pruss1_intc>;
>> +
>> + pinctrl-0 = <&pruss1_eth_default>;
>> + pinctrl-names = "default";
>> +
>> + ethernet-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pruss1_emac0: ethernet-port@0 {
>> + reg = <0>;
>> + phy-handle = <&pruss1_eth0_phy>;
>> + phy-mode = "mii";
>> + interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
>> + interrupt-names = "rx", "emac_ptp_tx",
>> + "hsr_ptp_tx";
>> + /* Filled in by bootloader */
>> + local-mac-address = [00 00 00 00 00 00];
>> + };
>> +
>> + pruss1_emac1: ethernet-port@1 {
>> + reg = <1>;
>> + phy-handle = <&pruss1_eth1_phy>;
>> + phy-mode = "mii";
>> + interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
>> + interrupt-names = "rx", "emac_ptp_tx",
>> + "hsr_ptp_tx";
>> + /* Filled in by bootloader */
>> + local-mac-address = [00 00 00 00 00 00];
>> + };
>> + };
>> + };
>> + - |
>> + /* Dual-MAC Ethernet application node on PRU-ICSS */
>> + pruss_eth: pruss-eth {
>
> Really need 3 examples?
>
We included these examples to differentiate between three series
of devices (AM335x, AM437x and AM57xx) with same architecture
for PRU-ICSS but differences in number of instances, local
interrupt controller mapping, size, offset differences and etc.
>> + compatible = "ti,am3359-prueth";
>> + ti,prus = <&pru0>, <&pru1>;
>> + sram = <&ocmcram>;
>> + ti,mii-rt = <&pruss_mii_rt>;
>> + ti,iep = <&pruss_iep>;
>> + ti,ecap = <&pruss_ecap>;
>> + interrupts = <20 2 2>, <21 3 3>;
>> + interrupt-names = "rx_hp", "rx_lp";
>> + interrupt-parent = <&pruss_intc>;
>> +
>> + pinctrl-0 = <&pruss_eth_default>;
>> + pinctrl-names = "default";
>> +
>> + ethernet-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + pruss_emac0: ethernet-port@0 {
>> + reg = <0>;
>> + phy-handle = <&pruss_eth0_phy>;
>> + phy-mode = "mii";
>> + interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
>> + interrupt-names = "rx", "emac_ptp_tx",
>> + "hsr_ptp_tx";
>> + /* Filled in by bootloader */
>> + local-mac-address = [00 00 00 00 00 00];
>> + };
>> +
>> + pruss_emac1: ethernet-port@1 {
>> + reg = <1>;
>> + phy-handle = <&pruss_eth1_phy>;
>> + phy-mode = "mii";
>> + interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
>> + interrupt-names = "rx", "emac_ptp_tx",
>> + "hsr_ptp_tx";
>> + /* Filled in by bootloader */
>> + local-mac-address = [00 00 00 00 00 00];
>> + };
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
>> b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
>> new file mode 100644
>> index 000000000000..42f217099b2e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
>> @@ -0,0 +1,32 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/ti,pruss-ecap.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments PRU-ICSS Enhanced Capture (eCAP) event module
>> +
>> +maintainers:
>> + - Murali Karicheri <m-karicheri2@...com>
>> + - Parvathi Pudi <parvathi@...thit.com>
>> + - Basharath Hussain Khaja <basharath@...thit.com>
>> +
>> +properties:
>> + compatible:
>> + const: ti,pruss-ecap
>> +
>> + reg:
>> + maxItems: 1
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + pruss2_ecap: ecap@...00 {
>> + compatible = "ti,pruss-ecap";
>> + reg = <0x30000 0x60>;
>> + };
>> diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
>> b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
>> index 927b3200e29e..594f54264a8c 100644
>> --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
>> +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
>> @@ -251,6 +251,15 @@ patternProperties:
>>
>> type: object
>>
>> + ecap@[a-f0-9]+$:
>> + description:
>> + PRU-ICSS has a Enhanced Capture (eCAP) event module which can generate
>> + and capture periodic timer based events which will be used for features
>> + like RX Pacing to rise interrupt when the timer event has occurred.
>> + Each PRU-ICSS instance has one eCAP modeule irrespective of SOCs.
>> +
>> + type: object
>
> This should either have a ref to ti,pruss-ecap.yaml or should just move
> reg and compatible here since it is only 2 properties.
>
We will address this in the next version.
Thanks and Regards,
Parvathi.
Powered by blists - more mailing lists