linux-kernel - Re: [PATCH v2 rc] iommu: Skip PASID validation for devices without PASID capability

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <85cab331-d19b-4cd7-83cb-02def31c71ac@amd.com>
Date: Thu, 1 May 2025 16:28:11 +0530
From: Vasant Hegde <vasant.hegde@....com>
To: Tushar Dave <tdave@...dia.com>, joro@...tes.org, will@...nel.org,
 robin.murphy@....com, kevin.tian@...el.com, jgg@...dia.com,
 yi.l.liu@...el.com, iommu@...ts.linux.dev, linux-kernel@...r.kernel.org
Cc: linux-pci@...r.kernel.org, stable@...r.kernel.org
Subject: Re: [PATCH v2 rc] iommu: Skip PASID validation for devices without
 PASID capability

On 4/30/2025 8:24 AM, Tushar Dave wrote:
> Generally PASID support requires ACS settings that usually create
> single device groups, but there are some niche cases where we can get
> multi-device groups and still have working PASID support. The primary
> issue is that PCI switches are not required to treat PASID tagged TLPs
> specially so appropriate ACS settings are required to route all TLPs to
> the host bridge if PASID is going to work properly.
> 
> pci_enable_pasid() does check that each device that will use PASID has
> the proper ACS settings to achieve this routing.
> 
> However, no-PASID devices can be combined with PASID capable devices
> within the same topology using non-uniform ACS settings. In this case
> the no-PASID devices may not have strict route to host ACS flags and
> end up being grouped with the PASID devices.
> 
> This configuration fails to allow use of the PASID within the iommu
> core code which wrongly checks if the no-PASID device supports PASID.
> 
> Fix this by ignoring no-PASID devices during the PASID validation. They
> will never issue a PASID TLP anyhow so they can be ignored.
> 
> Fixes: c404f55c26fc ("iommu: Validate the PASID in iommu_attach_device_pasid()")
> Cc: stable@...r.kernel.org
> Signed-off-by: Tushar Dave <tdave@...dia.com>
> ---
> 
> changes in v2:
> - added no-pasid check in __iommu_set_group_pasid and __iommu_remove_group_pasid
> 
>  drivers/iommu/iommu.c | 22 ++++++++++++++++------
>  1 file changed, 16 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index 60aed01e54f2..8251b07f4022 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -3329,8 +3329,9 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain,
>  	int ret;

initialize ret to zero?

-Vasant

>  
>  	for_each_group_device(group, device) {
> -		ret = domain->ops->set_dev_pasid(domain, device->dev,
> -						 pasid, NULL);
> +		if (device->dev->iommu->max_pasids > 0)
> +			ret = domain->ops->set_dev_pasid(domain, device->dev,
> +							 pasid, NULL);
>  		if (ret)
>  			goto err_revert;
>  	}
> @@ -3342,7 +3343,8 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain,
>  	for_each_group_device(group, device) {
>  		if (device == last_gdev)
>  			break;
> -		iommu_remove_dev_pasid(device->dev, pasid, domain);
> +		if (device->dev->iommu->max_pasids > 0)
> +			iommu_remove_dev_pasid(device->dev, pasid, domain);
>  	}
>  	return ret;
>  }
> @@ -3353,8 +3355,10 @@ static void __iommu_remove_group_pasid(struct iommu_group *group,
>  {
>  	struct group_device *device;
>  
> -	for_each_group_device(group, device)
> -		iommu_remove_dev_pasid(device->dev, pasid, domain);
> +	for_each_group_device(group, device) {
> +		if (device->dev->iommu->max_pasids > 0)
> +			iommu_remove_dev_pasid(device->dev, pasid, domain);
> +	}
>  }
>  
>  /*
> @@ -3391,7 +3395,13 @@ int iommu_attach_device_pasid(struct iommu_domain *domain,
>  
>  	mutex_lock(&group->mutex);
>  	for_each_group_device(group, device) {
> -		if (pasid >= device->dev->iommu->max_pasids) {
> +		/*
> +		 * Skip PASID validation for devices without PASID support
> +		 * (max_pasids = 0). These devices cannot issue transactions
> +		 * with PASID, so they don't affect group's PASID usage.
> +		 */
> +		if ((device->dev->iommu->max_pasids > 0) &&
> +		    (pasid >= device->dev->iommu->max_pasids)) {
>  			ret = -EINVAL;
>  			goto out_unlock;
>  		}