lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250501125943.GN1567507@google.com>
Date: Thu, 1 May 2025 13:59:43 +0100
From: Lee Jones <lee@...nel.org>
To: mathieu.dubois-briand@...tlin.com
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Kamel Bouhara <kamel.bouhara@...tlin.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Bartosz Golaszewski <brgl@...ev.pl>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Uwe Kleine-König <ukleinek@...nel.org>,
	Michael Walle <mwalle@...nel.org>, Mark Brown <broonie@...nel.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	"Rafael J. Wysocki" <rafael@...nel.org>,
	Danilo Krummrich <dakr@...nel.org>, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
	linux-input@...r.kernel.org, linux-pwm@...r.kernel.org,
	andriy.shevchenko@...el.com,
	Grégory Clement <gregory.clement@...tlin.com>,
	Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v7 02/11] mfd: Add max7360 support

On Mon, 28 Apr 2025, mathieu.dubois-briand@...tlin.com wrote:

> From: Kamel Bouhara <kamel.bouhara@...tlin.com>
> 
> Add core driver to support MAX7360 i2c chip, multi function device
> with keypad, GPIO, PWM, GPO and rotary encoder submodules.
> 
> Signed-off-by: Kamel Bouhara <kamel.bouhara@...tlin.com>
> Co-developed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@...tlin.com>
> Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@...tlin.com>
> ---
>  drivers/mfd/Kconfig         |  14 ++++
>  drivers/mfd/Makefile        |   1 +
>  drivers/mfd/max7360.c       | 184 ++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/max7360.h | 109 ++++++++++++++++++++++++++
>  4 files changed, 308 insertions(+)

Getting there.  Couple of nits.  Last push!

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 22b936310039..c2998c6ce54c 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -2422,5 +2422,19 @@ config MFD_UPBOARD_FPGA
>  	  To compile this driver as a module, choose M here: the module will be
>  	  called upboard-fpga.
>  
> +config MFD_MAX7360
> +	tristate "Maxim MAX7360 I2C IO Expander"
> +	depends on I2C
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	select REGMAP_IRQ
> +	help
> +	  Say yes here to add support for Maxim MAX7360 device, embedding
> +	  keypad, rotary encoder, PWM and GPIO features.
> +
> +	  This driver provides common support for accessing the device;
> +	  additional drivers must be enabled in order to use the functionality
> +	  of the device.
> +
>  endmenu
>  endif
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 948cbdf42a18..add9ff58eb25 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -162,6 +162,7 @@ obj-$(CONFIG_MFD_DA9063)	+= da9063.o
>  obj-$(CONFIG_MFD_DA9150)	+= da9150-core.o
>  
>  obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
> +obj-$(CONFIG_MFD_MAX7360)	+= max7360.o
>  obj-$(CONFIG_MFD_MAX77541)	+= max77541.o
>  obj-$(CONFIG_MFD_MAX77620)	+= max77620.o
>  obj-$(CONFIG_MFD_MAX77650)	+= max77650.o
> diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c
> new file mode 100644
> index 000000000000..9a223a9b409d
> --- /dev/null
> +++ b/drivers/mfd/max7360.c
> @@ -0,0 +1,184 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Maxim MAX7360 Core Driver
> + *
> + * Copyright 2025 Bootlin
> + *
> + * Author: Kamel Bouhara <kamel.bouhara@...tlin.com>
> + * Author: Mathieu Dubois-Briand <mathieu.dubois-briand@...tlin.com>
> + */
> +
> +#include <linux/array_size.h>
> +#include <linux/bits.h>
> +#include <linux/delay.h>
> +#include <linux/device/devres.h>
> +#include <linux/dev_printk.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max7360.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +
> +static const struct mfd_cell max7360_cells[] = {
> +	{
> +		.name           = "max7360-pinctrl",
> +	},

All of these single line entries should be placed on a single line.

	{ .name = "max7360-pinctrl" },
	{ .name = "max7360-pwm" },

If ordering is not important.  Please group them.

> +	{
> +		.name           = "max7360-pwm",
> +	},
> +	{
> +		.name           = "max7360-gpo",
> +		.of_compatible	= "maxim,max7360-gpo",
> +	},
> +	{
> +		.name           = "max7360-gpio",
> +		.of_compatible	= "maxim,max7360-gpio",
> +	},
> +	{
> +		.name           = "max7360-keypad",
> +	},
> +	{
> +		.name           = "max7360-rotary",
> +	},
> +};
> +
> +static const struct regmap_range max7360_volatile_ranges[] = {
> +	{
> +		.range_min = MAX7360_REG_KEYFIFO,
> +		.range_max = MAX7360_REG_KEYFIFO,
> +	}, {
> +		.range_min = MAX7360_REG_I2C_TIMEOUT,
> +		.range_max = MAX7360_REG_RTR_CNT,
> +	},
> +};

Use regmap_reg_range()

> +static const struct regmap_access_table max7360_volatile_table = {
> +	.yes_ranges = max7360_volatile_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
> +};
> +
> +static const struct regmap_config max7360_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = MAX7360_REG_PWMCFG(MAX7360_PORT_PWM_COUNT - 1),
> +	.volatile_table = &max7360_volatile_table,
> +	.cache_type = REGCACHE_MAPLE,
> +};
> +
> +static int max7360_mask_irqs(struct regmap *regmap)
> +{
> +	struct device *dev = regmap_get_device(regmap);
> +	unsigned int val;
> +	int ret;
> +
> +	/*
> +	 * GPIO/PWM interrupts are not masked on reset: as the MAX7360 "INTI"
> +	 * interrupt line is shared between GPIOs and rotary encoder, this could
> +	 * result in repeated spurious interrupts on the rotary encoder driver
> +	 * if the GPIO driver is not loaded. Mask them now to avoid this
> +	 * situation.
> +	 */
> +	for (unsigned int i = 0; i < MAX7360_PORT_PWM_COUNT; i++) {
> +		ret = regmap_write_bits(regmap, MAX7360_REG_PWMCFG(i),
> +					MAX7360_PORT_CFG_INTERRUPT_MASK,
> +					MAX7360_PORT_CFG_INTERRUPT_MASK);
> +		if (ret) {
> +			dev_err(dev, "Failed to write max7360 port configuration");

MAX7360

> +			return ret;
> +		}
> +	}
> +
> +	/* Read GPIO in register, to ACK any pending IRQ. */
> +	ret = regmap_read(regmap, MAX7360_REG_GPIOIN, &val);
> +	if (ret)
> +		dev_err(dev, "Failed to read gpio values: %d\n", ret);

GPIO

> +
> +	return ret;
> +}
> +
> +static int max7360_reset(struct regmap *regmap)
> +{
> +	struct device *dev = regmap_get_device(regmap);
> +	int ret;
> +
> +	ret = regmap_write(regmap, MAX7360_REG_GPIOCFG, MAX7360_GPIO_CFG_GPIO_RST);
> +	if (ret) {
> +		dev_err(dev, "Failed to reset GPIO configuration: %x\n", ret);
> +		return ret;
> +	}
> +
> +	ret = regcache_drop_region(regmap, MAX7360_REG_GPIOCFG, MAX7360_REG_GPIO_LAST);
> +	if (ret) {
> +		dev_err(dev, "Failed to drop regmap cache: %x\n", ret);
> +		return ret;
> +	}
> +
> +	ret = regmap_write(regmap, MAX7360_REG_SLEEP, 0);
> +	if (ret) {
> +		dev_err(dev, "Failed to reset autosleep configuration: %x\n", ret);
> +		return ret;
> +	}
> +
> +	ret = regmap_write(regmap, MAX7360_REG_DEBOUNCE, 0);
> +	if (ret)
> +		dev_err(dev, "Failed to reset GPO port count: %x\n", ret);
> +
> +	return ret;
> +}
> +
> +static int max7360_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct regmap *regmap;
> +	int ret;
> +
> +	regmap = devm_regmap_init_i2c(client, &max7360_regmap_config);
> +	if (IS_ERR(regmap))
> +		return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialise regmap\n");

dev_err_ptr_probe()

> +
> +	ret = max7360_reset(regmap);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to reset device\n");
> +
> +	/* Get the device out of shutdown mode. */
> +	ret = regmap_write_bits(regmap, MAX7360_REG_GPIOCFG,
> +				MAX7360_GPIO_CFG_GPIO_EN,
> +				MAX7360_GPIO_CFG_GPIO_EN);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to enable GPIO and PWM module\n");
> +
> +	ret = max7360_mask_irqs(regmap);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Could not mask interrupts\n");
> +
> +	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> +				   max7360_cells, ARRAY_SIZE(max7360_cells),
> +				   NULL, 0, NULL);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to register child devices\n");
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id max7360_dt_match[] = {
> +	{ .compatible = "maxim,max7360" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, max7360_dt_match);
> +
> +static struct i2c_driver max7360_driver = {
> +	.driver = {
> +		.name = "max7360",
> +		.of_match_table = max7360_dt_match,
> +	},
> +	.probe = max7360_probe,
> +};
> +module_i2c_driver(max7360_driver);
> +
> +MODULE_DESCRIPTION("Maxim MAX7360 I2C IO Expander core driver");
> +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@...tlin.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/max7360.h b/include/linux/mfd/max7360.h
> new file mode 100644
> index 000000000000..b1d4cbee2385
> --- /dev/null
> +++ b/include/linux/mfd/max7360.h
> @@ -0,0 +1,109 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#ifndef __LINUX_MFD_MAX7360_H
> +#define __LINUX_MFD_MAX7360_H
> +
> +#include <linux/bits.h>
> +
> +#define MAX7360_MAX_KEY_ROWS		8
> +#define MAX7360_MAX_KEY_COLS		8
> +#define MAX7360_MAX_KEY_NUM		(MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS)
> +#define MAX7360_ROW_SHIFT		3
> +
> +#define MAX7360_MAX_GPIO		8
> +#define MAX7360_MAX_GPO			6
> +#define MAX7360_PORT_PWM_COUNT		8
> +#define MAX7360_PORT_RTR_PIN		(MAX7360_PORT_PWM_COUNT - 1)
> +
> +/*
> + * MAX7360 registers
> + */
> +#define MAX7360_REG_KEYFIFO		0x00
> +#define MAX7360_REG_CONFIG		0x01
> +#define MAX7360_REG_DEBOUNCE		0x02
> +#define MAX7360_REG_INTERRUPT		0x03
> +#define MAX7360_REG_PORTS		0x04
> +#define MAX7360_REG_KEYREP		0x05
> +#define MAX7360_REG_SLEEP		0x06
> +
> +/*
> + * MAX7360 GPIO registers
> + *
> + * All these registers are reset together when writing bit 3 of
> + * MAX7360_REG_GPIOCFG.
> + */
> +#define MAX7360_REG_GPIOCFG		0x40
> +#define MAX7360_REG_GPIOCTRL		0x41
> +#define MAX7360_REG_GPIODEB		0x42
> +#define MAX7360_REG_GPIOCURR		0x43
> +#define MAX7360_REG_GPIOOUTM		0x44
> +#define MAX7360_REG_PWMCOM		0x45
> +#define MAX7360_REG_RTRCFG		0x46
> +#define MAX7360_REG_I2C_TIMEOUT		0x48
> +#define MAX7360_REG_GPIOIN		0x49
> +#define MAX7360_REG_RTR_CNT		0x4A
> +#define MAX7360_REG_PWMBASE		0x50
> +#define MAX7360_REG_PWMCFGBASE		0x58
> +
> +#define MAX7360_REG_GPIO_LAST		0x5F
> +
> +#define MAX7360_REG_PWM(x)		(MAX7360_REG_PWMBASE + (x))
> +#define MAX7360_REG_PWMCFG(x)		(MAX7360_REG_PWMCFGBASE + (x))
> +
> +/*
> + * Configuration register bits
> + */
> +#define MAX7360_FIFO_EMPTY		0x3f
> +#define MAX7360_FIFO_OVERFLOW		0x7f
> +#define MAX7360_FIFO_RELEASE		BIT(6)
> +#define MAX7360_FIFO_COL		GENMASK(5, 3)
> +#define MAX7360_FIFO_ROW		GENMASK(2, 0)
> +
> +#define MAX7360_CFG_SLEEP		BIT(7)
> +#define MAX7360_CFG_INTERRUPT		BIT(5)
> +#define MAX7360_CFG_KEY_RELEASE		BIT(3)
> +#define MAX7360_CFG_WAKEUP		BIT(1)
> +#define MAX7360_CFG_TIMEOUT		BIT(0)
> +
> +#define MAX7360_DEBOUNCE		GENMASK(4, 0)
> +#define MAX7360_DEBOUNCE_MIN		9
> +#define MAX7360_DEBOUNCE_MAX		40
> +#define MAX7360_PORTS			GENMASK(8, 5)
> +
> +#define MAX7360_INTERRUPT_TIME_MASK	GENMASK(4, 0)
> +#define MAX7360_INTERRUPT_FIFO_MASK	GENMASK(7, 5)
> +
> +#define MAX7360_PORT_CFG_INTERRUPT_MASK		BIT(7)
> +#define MAX7360_PORT_CFG_INTERRUPT_EDGES	BIT(6)
> +#define MAX7360_PORT_CFG_COMMON_PWM		BIT(5)
> +
> +/*
> + * Autosleep register values
> + */
> +#define MAX7360_AUTOSLEEP_8192MS	0x01
> +#define MAX7360_AUTOSLEEP_4096MS	0x02
> +#define MAX7360_AUTOSLEEP_2048MS	0x03
> +#define MAX7360_AUTOSLEEP_1024MS	0x04
> +#define MAX7360_AUTOSLEEP_512MS		0x05
> +#define MAX7360_AUTOSLEEP_256MS		0x06
> +
> +#define MAX7360_GPIO_CFG_RTR_EN		BIT(7)
> +#define MAX7360_GPIO_CFG_GPIO_EN	BIT(4)
> +#define MAX7360_GPIO_CFG_GPIO_RST	BIT(3)
> +
> +#define MAX7360_ROT_DEBOUNCE		GENMASK(3, 0)
> +#define MAX7360_ROT_DEBOUNCE_MIN	0
> +#define MAX7360_ROT_DEBOUNCE_MAX	15
> +#define MAX7360_ROT_INTCNT		GENMASK(6, 4)
> +#define MAX7360_ROT_INTCNT_DLY		BIT(7)
> +
> +#define MAX7360_INT_INTI		0
> +#define MAX7360_INT_INTK		1
> +
> +#define MAX7360_INT_GPIO		0
> +#define MAX7360_INT_KEYPAD		1
> +#define MAX7360_INT_ROTARY		2
> +
> +#define MAX7360_NR_INTERNAL_IRQS	3
> +
> +#endif
> 
> -- 
> 2.39.5
> 

-- 
Lee Jones [李琼斯]

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ