[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CA+V-a8s2b+Epjhn_9z1zREY6ohraF142+b8jtEthD-34fRy84A@mail.gmail.com>
Date: Fri, 2 May 2025 09:04:18 +0100
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: Andi Shyti <andi.shyti@...nel.org>
Cc: Chris Brandt <chris.brandt@...esas.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Geert Uytterhoeven <geert+renesas@...der.be>, Andy Shevchenko <andy@...nel.org>,
linux-renesas-soc@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-kernel@...r.kernel.org, Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH v10] i2c: riic: Implement bus recovery
Hi Andi,
On Thu, May 1, 2025 at 10:19 PM Andi Shyti <andi.shyti@...nel.org> wrote:
>
> Hi Lad,
>
> On Thu, May 01, 2025 at 09:40:03PM +0100, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> >
> > Implement I2C bus recovery support for the RIIC controller by making use
> > of software-controlled SCL and SDA line manipulation. The controller allows
> > forcing SCL and SDA levels through control bits, which enables generation
> > of manual clock pulses and a stop condition to free a stuck bus.
> >
> > This implementation wires up the bus recovery mechanism using
> > i2c_generic_scl_recovery and provides get/set operations for SCL and SDA.
> >
> > This allows the RIIC driver to recover from bus hang scenarios where SDA
> > is held low by a slave.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > Reviewed-by: Wolfram Sang <wsa+renesas@...g-engineering.com>
> > Tested-by: Wolfram Sang <wsa+renesas@...g-engineering.com>
> > Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
>
> I'm happy to see this patch in. Thanks Wolfram for your tests and
> reviews.
>
> Merged to i2c/i2c-host.
>
Thank you.
Cheers,
Prabhakar
Powered by blists - more mailing lists