linux-kernel - Re: [PATCH v7 1/3] clocksource/drivers/timer-tegra186: add WDIOC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <aBSOJTlQUUnFIEVr@mai.linaro.org>
Date: Fri, 2 May 2025 11:19:33 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: Robert Lin <robelin@...dia.com>
Cc: thierry.reding@...il.com, jonathanh@...dia.com, tglx@...utronix.de,
	pohsuns@...dia.com, linux-kernel@...r.kernel.org,
	linux-tegra@...r.kernel.org, sumitg@...dia.com
Subject: Re: [PATCH v7 1/3] clocksource/drivers/timer-tegra186: add
 WDIOC_GETTIMELEFT support

On Fri, May 02, 2025 at 12:37:25PM +0800, Robert Lin wrote:
> From: Pohsun Su <pohsuns@...dia.com>
> 
> This change adds support for WDIOC_GETTIMELEFT so userspace
> programs can get the number of seconds before system reset by
> the watchdog timer via ioctl.
> 
> Signed-off-by: Pohsun Su <pohsuns@...dia.com>
> Signed-off-by: Robert Lin <robelin@...dia.com>
> ---
>  drivers/clocksource/timer-tegra186.c | 64 +++++++++++++++++++++++++++-
>  1 file changed, 63 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-tegra186.c
> index ea742889ee06..8d5698770cbd 100644
> --- a/drivers/clocksource/timer-tegra186.c
> +++ b/drivers/clocksource/timer-tegra186.c
> @@ -1,8 +1,9 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
> - * Copyright (c) 2019-2020 NVIDIA Corporation. All rights reserved.
> + * Copyright (c) 2019-2025 NVIDIA Corporation. All rights reserved.
>   */
>  
> +#include <linux/bitfield.h>
>  #include <linux/clocksource.h>
>  #include <linux/module.h>
>  #include <linux/interrupt.h>
> @@ -30,6 +31,7 @@
>  
>  #define TMRSR 0x004
>  #define  TMRSR_INTR_CLR BIT(30)
> +#define  TMRSR_PCV GENMASK(28, 0)
>  
>  #define TMRCSSR 0x008
>  #define  TMRCSSR_SRC_USEC (0 << 0)
> @@ -46,6 +48,9 @@
>  #define  WDTCR_TIMER_SOURCE_MASK 0xf
>  #define  WDTCR_TIMER_SOURCE(x) ((x) & 0xf)
>  
> +#define WDTSR 0x004
> +#define  WDTSR_CURRENT_EXPIRATION_COUNT GENMASK(14, 12)
> +
>  #define WDTCMDR 0x008
>  #define  WDTCMDR_DISABLE_COUNTER BIT(1)
>  #define  WDTCMDR_START_COUNTER BIT(0)
> @@ -235,12 +240,69 @@ static int tegra186_wdt_set_timeout(struct watchdog_device *wdd,
>  	return 0;
>  }
>  
> +static unsigned int tegra186_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> +	struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
> +	u32 expiration, val;
> +	u64 timeleft;
> +
> +	if (!watchdog_active(&wdt->base)) {
> +		/* return zero if the watchdog timer is not activated. */
> +		return 0;
> +	}
> +
> +	/*
> +	 * Reset occurs on the fifth expiration of the
> +	 * watchdog timer and so when the watchdog timer is configured,
> +	 * the actual value programmed into the counter is 1/5 of the
> +	 * timeout value. Once the counter reaches 0, expiration count
> +	 * will be increased by 1 and the down counter restarts.
> +	 * Hence to get the time left before system reset we must
> +	 * combine 2 parts:
> +	 * 1. value of the current down counter
> +	 * 2. (number of counter expirations remaining) * (timeout/5)
> +	 */
> +
> +	/* Get the current number of counter expirations. Should be a
> +	 * value between 0 and 4
> +	 */
> +	val = readl_relaxed(wdt->regs + WDTSR);
> +	expiration = FIELD_GET(WDTSR_CURRENT_EXPIRATION_COUNT, val);
> +	if (WARN_ON(expiration > 4))
> +		return 0;

Each call will generate a big warning in the message. May be simpler
to add a pr_err() with an explicit message.

> +	/* Get the current counter value in microsecond. */
> +	val = readl_relaxed(wdt->tmr->regs + TMRSR);
> +	timeleft = FIELD_GET(TMRSR_PCV, val);
> +
> +	/*
> +	 * Calculate the time remaining by adding the time for the
> +	 * counter value to the time of the counter expirations that
> +	 * remain.
> +	 */
> +	timeleft += (((u64)wdt->base.timeout * USEC_PER_SEC) / 5) * (4 - expiration);
> +
> +	/*
> +	 * Convert the current counter value to seconds,
> +	 * rounding up to the nearest second. Cast u64 to
> +	 * u32 under the assumption that no overflow happens
> +	 * when coverting to seconds.
> +	 */
> +	timeleft = (timeleft + USEC_PER_SEC / 2) / USEC_PER_SEC;

Did you check there is a macro fitting the need in math.h ?

> +	if (WARN_ON(timeleft > U32_MAX))

s/WARN_ON/pr_err/

> +		return U32_MAX;
> +
> +	return lower_32_bits(timeleft);
> +}
> +
>  static const struct watchdog_ops tegra186_wdt_ops = {
>  	.owner = THIS_MODULE,
>  	.start = tegra186_wdt_start,
>  	.stop = tegra186_wdt_stop,
>  	.ping = tegra186_wdt_ping,
>  	.set_timeout = tegra186_wdt_set_timeout,
> +	.get_timeleft = tegra186_wdt_get_timeleft,
>  };
>  
>  static struct tegra186_wdt *tegra186_wdt_create(struct tegra186_timer *tegra,
> -- 
> 2.34.1
> 

-- 

 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog