| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9bf9b71f-e7d6-40ac-9fe8-a8396db0870e@linaro.org>
Date: Fri, 2 May 2025 11:28:53 +0200
From: neil.armstrong@...aro.org
To: Praveen Talari <quic_ptalari@...cinc.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Viresh Kumar <vireshk@...nel.org>,
Nishanth Menon <nm@...com>, Stephen Boyd <sboyd@...nel.org>,
"Rafael J. Wysocki" <rafael@...nel.org>, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
devicetree@...r.kernel.org, linux-pm@...r.kernel.org
Cc: psodagud@...cinc.com, djaggi@...cinc.com, quic_msavaliy@...cinc.com,
quic_vtanuku@...cinc.com, quic_arandive@...cinc.com,
quic_mnaresh@...cinc.com, quic_shazhuss@...cinc.com
Subject: Re: [PATCH v3 4/9] soc: qcom: geni-se: Enable QUPs on SA8255p
Qualcomm platforms
On 02/05/2025 05:10, Praveen Talari wrote:
> On the sa8255p platform, resources such as clocks,interconnects
> and TLMM (GPIO) configurations are managed by firmware.
>
> Introduce a platform data function callback to distinguish whether
> resource control is performed by firmware or directly by the driver
> in linux.
>
> The refactor ensures clear differentiation of resource
> management mechanisms, improving maintainability and flexibility
> in handling platform-specific configurations.
>
> Signed-off-by: Praveen Talari <quic_ptalari@...cinc.com>
>
> v1 -> v2
> - changed datatype of i from int to unsigned int as per comment.
> ---
> drivers/soc/qcom/qcom-geni-se.c | 77 +++++++++++++++++++++------------
> 1 file changed, 49 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
> index 4cb959106efa..0e3658b09603 100644
> --- a/drivers/soc/qcom/qcom-geni-se.c
> +++ b/drivers/soc/qcom/qcom-geni-se.c
> @@ -105,6 +105,8 @@ struct geni_wrapper {
> struct geni_se_desc {
> unsigned int num_clks;
> const char * const *clks;
> + int (*geni_se_rsc_init)(struct geni_wrapper *wrapper,
> + const struct geni_se_desc *desc);
> };
>
> static const char * const icc_path_names[] = {"qup-core", "qup-config",
> @@ -891,10 +893,44 @@ int geni_icc_disable(struct geni_se *se)
> }
> EXPORT_SYMBOL_GPL(geni_icc_disable);
>
> +static int geni_se_resource_init(struct geni_wrapper *wrapper,
> + const struct geni_se_desc *desc)
> +{
> + struct device *dev = wrapper->dev;
> + int ret;
> + unsigned int i;
> +
> + wrapper->num_clks = min_t(unsigned int, desc->num_clks, MAX_CLKS);
> +
> + for (i = 0; i < wrapper->num_clks; ++i)
> + wrapper->clks[i].id = desc->clks[i];
> +
> + ret = of_count_phandle_with_args(dev->of_node, "clocks", "#clock-cells");
> + if (ret < 0) {
> + dev_err(dev, "invalid clocks property at %pOF\n", dev->of_node);
> + return ret;
> + }
> +
> + if (ret < wrapper->num_clks) {
> + dev_err(dev, "invalid clocks count at %pOF, expected %d entries\n",
> + dev->of_node, wrapper->num_clks);
> + return -EINVAL;
> + }
> +
> + ret = devm_clk_bulk_get(dev, wrapper->num_clks, wrapper->clks);
> + if (ret) {
> + dev_err(dev, "Err getting clks %d\n", ret);
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> static int geni_se_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct geni_wrapper *wrapper;
> + const struct geni_se_desc *desc;
> int ret;
>
> wrapper = devm_kzalloc(dev, sizeof(*wrapper), GFP_KERNEL);
> @@ -906,36 +942,12 @@ static int geni_se_probe(struct platform_device *pdev)
> if (IS_ERR(wrapper->base))
> return PTR_ERR(wrapper->base);
>
> - if (!has_acpi_companion(&pdev->dev)) {
> - const struct geni_se_desc *desc;
> - int i;
> -
> - desc = device_get_match_data(&pdev->dev);
> - if (!desc)
> - return -EINVAL;
> -
> - wrapper->num_clks = min_t(unsigned int, desc->num_clks, MAX_CLKS);
> -
> - for (i = 0; i < wrapper->num_clks; ++i)
> - wrapper->clks[i].id = desc->clks[i];
> -
> - ret = of_count_phandle_with_args(dev->of_node, "clocks", "#clock-cells");
> - if (ret < 0) {
> - dev_err(dev, "invalid clocks property at %pOF\n", dev->of_node);
> - return ret;
> - }
> + desc = device_get_match_data(&pdev->dev);
>
> - if (ret < wrapper->num_clks) {
> - dev_err(dev, "invalid clocks count at %pOF, expected %d entries\n",
> - dev->of_node, wrapper->num_clks);
> + if (!has_acpi_companion(&pdev->dev) && desc->geni_se_rsc_init) {
> + ret = desc->geni_se_rsc_init(wrapper, desc);
> + if (ret)
> return -EINVAL;
> - }
> -
> - ret = devm_clk_bulk_get(dev, wrapper->num_clks, wrapper->clks);
> - if (ret) {
> - dev_err(dev, "Err getting clks %d\n", ret);
> - return ret;
> - }
> }
>
> dev_set_drvdata(dev, wrapper);
> @@ -951,6 +963,13 @@ static const char * const qup_clks[] = {
> static const struct geni_se_desc qup_desc = {
> .clks = qup_clks,
> .num_clks = ARRAY_SIZE(qup_clks),
> + .geni_se_rsc_init = geni_se_resource_init,
> +};
> +
> +static const struct geni_se_desc sa8255p_qup_desc = {
> + .clks = NULL,
> + .num_clks = 0,
> + .geni_se_rsc_init = NULL,
Just don't specify it, it will be NULL by default, same for the other fields aswell.
Just declare an empty struct instead, maybe add a comment if you want the reader
to understand there's no clocks for this instance type.
Another much simpler way to implement this would be to just check for num_clks
along !has_acpi_companion(&pdev->dev) like:
if (!has_acpi_companion(&pdev->dev) && desc->num_clks) {
}
And you're done.
Neil
> };
>
> static const char * const i2c_master_hub_clks[] = {
> @@ -960,11 +979,13 @@ static const char * const i2c_master_hub_clks[] = {
> static const struct geni_se_desc i2c_master_hub_desc = {
> .clks = i2c_master_hub_clks,
> .num_clks = ARRAY_SIZE(i2c_master_hub_clks),
> + .geni_se_rsc_init = geni_se_resource_init,
> };
>
> static const struct of_device_id geni_se_dt_match[] = {
> { .compatible = "qcom,geni-se-qup", .data = &qup_desc },
> { .compatible = "qcom,geni-se-i2c-master-hub", .data = &i2c_master_hub_desc },
> + { .compatible = "qcom,sa8255p-geni-se-qup", .data = &sa8255p_qup_desc },
> {}
> };
> MODULE_DEVICE_TABLE(of, geni_se_dt_match);
Powered by blists - more mailing lists