linux-kernel - [PATCH v3 0/2] Add support for Texas Instruments DTHE V2 crypto accelerator

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250502121253.456974-2-t-pratham@ti.com>
Date: Fri, 2 May 2025 17:21:15 +0530
From: T Pratham <t-pratham@...com>
To: Herbert Xu <herbert@...dor.apana.org.au>,
        "David S. Miller"
	<davem@...emloft.net>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski
	<krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>
CC: T Pratham <t-pratham@...com>, <linux-crypto@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Kamlesh
 Gurudasani <kamlesh@...com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Praneeth
 Bajjuri <praneeth@...com>,
        Manorit Chawdhry <m-chawdhry@...com>
Subject: [PATCH v3 0/2] Add support for Texas Instruments DTHE V2 crypto accelerator

This series adds support for TI DTHE V2 crypto accelerator. DTHE V2 is a
new crypto accelerator which contains multiple crypto IPs [1].
This series implements support for ECB and CBC modes of AES for the AES
Engine of the DTHE, using skcipher APIs of the kernel.

Tested with:
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y

and tcrypt,
sudo modprobe tcrypt mode=500 sec=1

Signed-off-by: T Pratham <t-pratham@...com>
---
[1]: Section 14.6.3 (DMA Control Registers -> DMASS_DTHE)
Link: https://www.ti.com/lit/ug/sprujb4/sprujb4.pdf

Change log:
v3:
 - Corrected dt-bindings reg length is too long error
 - Converted AES driver code to use crypto_engine APIs for using
   internal crypto queue instead of mutex.
 - Removed calls to skcipher_request_complete in paths not returning
   -EINPROGRESS before.
 - Added missing KConfig import, which was accidentally removed in v2.

v2:
 - Corrected dt-bindings syntax errors and other review comments in v1.
 - Completely changed driver code structure, splitting code into
   multiple files

Link to previous versions:
v2: https://lore.kernel.org/all/20250411091321.2925308-1-t-pratham@ti.com/
v1: https://lore.kernel.org/all/20250206-dthe-v2-aes-v1-0-1e86cf683928@ti.com/
---
T Pratham (2):
  dt-bindings: crypto: Add binding for TI DTHE V2 driver
  crypto: ti: Add driver for DTHE V2 AES Engine (ECB, CBC)

 .../devicetree/bindings/crypto/ti,dthev2.yaml |  55 +++
 MAINTAINERS                                   |   7 +
 drivers/crypto/Kconfig                        |   1 +
 drivers/crypto/Makefile                       |   1 +
 drivers/crypto/ti/Kconfig                     |  13 +
 drivers/crypto/ti/Makefile                    |   3 +
 drivers/crypto/ti/dthev2-aes.c                | 414 ++++++++++++++++++
 drivers/crypto/ti/dthev2-common.c             | 220 ++++++++++
 drivers/crypto/ti/dthev2-common.h             | 110 +++++
 9 files changed, 824 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/ti,dthev2.yaml
 create mode 100644 drivers/crypto/ti/Kconfig
 create mode 100644 drivers/crypto/ti/Makefile
 create mode 100644 drivers/crypto/ti/dthev2-aes.c
 create mode 100644 drivers/crypto/ti/dthev2-common.c
 create mode 100644 drivers/crypto/ti/dthev2-common.h

-- 
2.43.0