[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aBTLBvw_88hQBbns@smile.fi.intel.com>
Date: Fri, 2 May 2025 16:39:18 +0300
From: Andy Shevchenko <andy@...nel.org>
To: Angelo Dureghello <adureghello@...libre.com>
Cc: Jonathan Cameron <jic23@...nel.org>,
David Lechner <dlechner@...libre.com>,
Nuno Sá <nuno.sa@...log.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v2 3/5] iio: adc: ad7606: add offset and phase
calibration support
On Fri, May 02, 2025 at 03:27:00PM +0200, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello@...libre.com>
>
> Add support for offset and phase calibration, only for
> devices that support software mode, that are:
>
> ad7606b
> ad7606c-16
> ad7606c-18
...
> +static int ad7606_get_calib_offset(struct ad7606_state *st, int ch, int *val)
> +{
> + int ret;
> +
> + ret = st->bops->reg_read(st, AD7606_CALIB_OFFSET(ch));
> + if (ret < 0)
> + return ret;
> +
> + *val = st->chip_info->calib_offset_avail[0] +
> + ret * st->chip_info->calib_offset_avail[1];
Something wrong with the indentation.
> + return 0;
> +}
...
> +static int ad7606_set_calib_offset(struct ad7606_state *st, int ch, int val)
> +{
> + int start_val, step_val, stop_val;
All need to be signed?
> + start_val = st->chip_info->calib_offset_avail[0];
> + step_val = st->chip_info->calib_offset_avail[1];
> + stop_val = st->chip_info->calib_offset_avail[2];
> +
> + if (val < start_val || val > stop_val)
> + return -EINVAL;
> +
> + val -= start_val;
> + val /= step_val;
> +
> + return st->bops->reg_write(st, AD7606_CALIB_OFFSET(ch), val);
> +}
...
> +static int ad7606_set_calib_phase(struct ad7606_state *st, int ch, int val,
> + int val2)
> +{
> + int wreg, start_ns, step_ns, stop_ns;
Ditto.
> + if (val != 0)
> + return -EINVAL;
> +
> + start_ns = st->chip_info->calib_phase_avail[0][1];
> + step_ns = st->chip_info->calib_phase_avail[1][1];
> + stop_ns = st->chip_info->calib_phase_avail[2][1];
> +
> + /*
> + * ad7606b: phase dielay from 0 to 318.75 μs in steps of 1.25 μs.
> + * ad7606c-16/18: phase delay from 0 µs to 255 µs in steps of 1 µs.
> + */
> + if (val2 < start_ns || val2 > stop_ns)
> + return -EINVAL;
Wrong indentation. Please fix in all places where it happens.
> + wreg = val2 / step_ns;
> +
> + return st->bops->reg_write(st, AD7606_CALIB_PHASE(ch), wreg);
> +}
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists