[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250503111029.3583807-2-quic_vdadhani@quicinc.com>
Date: Sat, 3 May 2025 16:40:25 +0530
From: Viken Dadhaniya <quic_vdadhani@...cinc.com>
To: andi.shyti@...nel.org, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, gregkh@...uxfoundation.org, jirislaby@...nel.org,
broonie@...nel.or, andersson@...nel.org, konradybcio@...nel.org,
johan+linaro@...nel.org, dianders@...omium.org, agross@...nel.org,
linux-arm-msm@...r.kernel.org, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org, linux-spi@...r.kernel.org
Cc: quic_msavaliy@...cinc.com, quic_anupkulk@...cinc.com,
Viken Dadhaniya <quic_vdadhani@...cinc.com>
Subject: [PATCH v4 1/5] dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Introduce a new YAML schema for QUP-supported peripherals. Define common
properties used across QUP-supported peripherals.
Add property `qcom,enable-gsi-dma` to configure the Serial Engine (SE) for
QCOM GPI DMA mode.
Reference the common schema YAML in the GENI I2C, SPI, and SERIAL YAML
files.
Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
---
v1 -> v2:
- Update qcom,gsi-dma-allowed property name to qcom,enable-gsi-dma.
- Remove full stop form title.
- Add reference of common schema YAML in the I2C, SPI, and SERIAL YAML files.
v1 Link: https://lore.kernel.org/linux-arm-msm/20250303124349.3474185-3-quic_vdadhani@quicinc.com/
---
---
.../bindings/i2c/qcom,i2c-geni-qcom.yaml | 1 +
.../serial/qcom,serial-geni-qcom.yaml | 1 +
.../soc/qcom/qcom,se-common-props.yaml | 26 +++++++++++++++++++
.../bindings/spi/qcom,spi-geni-qcom.yaml | 1 +
4 files changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index 9f66a3bb1f80..51534953a69c 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -75,6 +75,7 @@ required:
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
+ - $ref: /schemas/soc/qcom/qcom,se-common-props.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
index dd33794b3534..ed7b3909d87d 100644
--- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
@@ -12,6 +12,7 @@ maintainers:
allOf:
- $ref: /schemas/serial/serial.yaml#
+ - $ref: /schemas/soc/qcom/qcom,se-common-props.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml
new file mode 100644
index 000000000000..044eea4bb960
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,se-common-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QUP Peripheral-specific properties for I2C, SPI and SERIAL bus
+
+description:
+ The Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) is
+ a programmable module that supports a wide range of serial interfaces
+ such as UART, SPI, I2C, I3C, etc. This defines the common properties used
+ across QUP-supported peripherals.
+
+maintainers:
+ - Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
+ - Viken Dadhaniya <quic_vdadhani@...cinc.com>
+
+properties:
+ qcom,enable-gsi-dma:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Configure the Serial Engine (SE) to transfer data in QCOM GPI DMA mode.
+ By default, FIFO mode (PIO/CPU DMA) will be selected.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
index 2e20ca313ec1..d12c5a060ed0 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
@@ -25,6 +25,7 @@ description:
allOf:
- $ref: /schemas/spi/spi-controller.yaml#
+ - $ref: /schemas/soc/qcom/qcom,se-common-props.yaml#
properties:
compatible:
--
2.34.1
Powered by blists - more mailing lists