[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250503005828.6128-1-carlon.luca@gmail.com>
Date: Sat, 3 May 2025 02:58:10 +0200
From: Luca Carlon <carlon.luca@...il.com>
To: linux@...ck-us.net
Cc: carlon.luca@...il.com,
jdelvare@...e.com,
linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org,
lucas.demarchi@...el.com
Subject: Re: Suspend/resume failing due to SPD5118
> From the context it looks like the "sensors" command was never executed. To get
> another data point, it would help if you could load the driver, run the "sensors"
> command, and then try to hibernate.
Hello,
yes, I did not have the sensors command installed.
I removed SPD5118 from the blacklist and I rebooted the system. This is what the
"sensors" command is reporting after the boot:
spd5118-i2c-1-50
Adapter: SMBus I801 adapter at efa0
ERROR: Can't get value of subfeature temp1_lcrit_alarm: Can't read
ERROR: Can't get value of subfeature temp1_min_alarm: Can't read
ERROR: Can't get value of subfeature temp1_max_alarm: Can't read
ERROR: Can't get value of subfeature temp1_crit_alarm: Can't read
ERROR: Can't get value of subfeature temp1_min: Can't read
ERROR: Can't get value of subfeature temp1_max: Can't read
ERROR: Can't get value of subfeature temp1_lcrit: Can't read
ERROR: Can't get value of subfeature temp1_crit: Can't read
temp1: N/A (low = +0.0°C, high = +0.0°C)
(crit low = +0.0°C, crit = +0.0°C)
[...]
spd5118-i2c-1-51
Adapter: SMBus I801 adapter at efa0
ERROR: Can't get value of subfeature temp1_lcrit_alarm: Can't read
ERROR: Can't get value of subfeature temp1_min_alarm: Can't read
ERROR: Can't get value of subfeature temp1_max_alarm: Can't read
ERROR: Can't get value of subfeature temp1_crit_alarm: Can't read
ERROR: Can't get value of subfeature temp1_min: Can't read
ERROR: Can't get value of subfeature temp1_max: Can't read
ERROR: Can't get value of subfeature temp1_lcrit: Can't read
ERROR: Can't get value of subfeature temp1_crit: Can't read
temp1: N/A (low = +0.0°C, high = +0.0°C)
(crit low = +0.0°C, crit = +0.0°C)
I then tried to hibernate. Hibernation failed and the output of the "sensors"
command did not change.
I also tried to rmmod spd5118 and modprobe it. The output of the sensors
command does not show spd5118 anymore.
Hope I did what you asked properly.
Thanks for your answer.
Luca Carlon
Powered by blists - more mailing lists