lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250503162440.2954-9-quic_nitirawa@quicinc.com>
Date: Sat,  3 May 2025 21:54:37 +0530
From: Nitin Rawat <quic_nitirawa@...cinc.com>
To: vkoul@...nel.org, kishon@...nel.org, manivannan.sadhasivam@...aro.org,
        James.Bottomley@...senPartnership.com, martin.petersen@...cle.com,
        bvanassche@....org, andersson@...nel.org, neil.armstrong@...aro.org,
        konrad.dybcio@....qualcomm.com
Cc: quic_rdwivedi@...cinc.com, quic_cang@...cinc.com,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
        Nitin Rawat <quic_nitirawa@...cinc.com>
Subject: [PATCH V4 08/11] phy: qcom-qmp-ufs: refactor qmp_ufs_power_off

In qmp_ufs_power_off, the PHY is already powered down by asserting
QPHY_PCS_POWER_DOWN_CONTROL. Therefore, additional phy_reset and
stopping SerDes are unnecessary. Also this approach does not
align with the phy HW programming guide.

Thus, refactor qmp_ufs_power_off to remove the phy_reset and stop
SerDes calls to simplify the code and ensure alignment with the PHY
HW programming guide.

Signed-off-by: Nitin Rawat <quic_nitirawa@...cinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 2df61ec68dc7..1cbc255c7c74 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -1826,13 +1826,6 @@ static int qmp_ufs_power_off(struct phy *phy)
 	struct qmp_ufs *qmp = phy_get_drvdata(phy);
 	const struct qmp_phy_cfg *cfg = qmp->cfg;

-	/* PHY reset */
-	if (!cfg->no_pcs_sw_reset)
-		qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
-
-	/* stop SerDes */
-	qphy_clrbits(qmp->pcs, cfg->regs[QPHY_START_CTRL], SERDES_START);
-
 	/* Put PHY into POWER DOWN state: active low */
 	qphy_clrbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
 			SW_PWRDN);
--
2.48.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ