| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<TY3PR01MB11346F143A2F83CAD8733BD2E868F2@TY3PR01MB11346.jpnprd01.prod.outlook.com>
Date: Sun, 4 May 2025 12:33:01 +0000
From: Biju Das <biju.das.jz@...renesas.com>
To: Prabhakar <prabhakar.csengg@...il.com>, Andrzej Hajda
<andrzej.hajda@...el.com>, Neil Armstrong <neil.armstrong@...aro.org>, Robert
Foss <rfoss@...nel.org>, laurent.pinchart
<laurent.pinchart@...asonboard.com>, Jonas Karlman <jonas@...boo.se>, Jernej
Skrabec <jernej.skrabec@...il.com>, Maarten Lankhorst
<maarten.lankhorst@...ux.intel.com>, Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>, David Airlie <airlied@...il.com>,
Simona Vetter <simona@...ll.ch>, Rob Herring <robh@...nel.org>, Krzysztof
Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Geert
Uytterhoeven <geert+renesas@...der.be>, Michael Turquette
<mturquette@...libre.com>, Stephen Boyd <sboyd@...nel.org>, Philipp Zabel
<p.zabel@...gutronix.de>, Magnus Damm <magnus.damm@...il.com>
CC: "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-renesas-soc@...r.kernel.org" <linux-renesas-soc@...r.kernel.org>,
"linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>, Fabrizio Castro
<fabrizio.castro.jz@...esas.com>, Prabhakar Mahadev Lad
<prabhakar.mahadev-lad.rj@...renesas.com>
Subject: RE: [PATCH v4 08/15] drm: renesas: rz-du: mipi_dsi: Use VCLK for
HSFREQ calculation
Hi Prabhakar,
> -----Original Message-----
> From: Prabhakar <prabhakar.csengg@...il.com>
> Sent: 30 April 2025 21:41
> Subject: [PATCH v4 08/15] drm: renesas: rz-du: mipi_dsi: Use VCLK for HSFREQ calculation
>
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
>
> Update the RZ/G2L MIPI DSI driver to calculate HSFREQ using the actual VCLK rate instead of the mode
> clock. The relationship between HSCLK and VCLK is:
>
> vclk * bpp <= hsclk * 8 * lanes
>
> Retrieve the VCLK rate using `clk_get_rate(dsi->vclk)`, ensuring that HSFREQ accurately reflects the
> clock rate set in hardware, leading to better precision in data transmission.
>
> Additionally, use `DIV_ROUND_CLOSEST_ULL` for a more precise division when computing `hsfreq`. Also,
> update unit conversions to use correct scaling factors for better clarity and correctness.
>
> Since `clk_get_rate()` returns the clock rate in Hz, update the HSFREQ threshold comparisons to use Hz
> instead of kHz to ensure correct behavior.
>
> Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> ---
> v3->v4:
> - Used MILLI instead of KILO
>
> v2->v3:
> - No changes
>
> v1->v2:
> - No changes
> ---
> .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 27 ++++++++++---------
> 1 file changed, 15 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-
> du/rzg2l_mipi_dsi.c
> index c5f698cd74f1..911c955a3a76 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> @@ -8,6 +8,7 @@
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/iopoll.h>
> +#include <linux/math.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_graph.h>
> @@ -15,6 +16,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/reset.h>
> #include <linux/slab.h>
> +#include <linux/units.h>
>
> #include <drm/drm_atomic.h>
> #include <drm/drm_atomic_helper.h>
> @@ -199,7 +201,7 @@ static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
> /* All DSI global operation timings are set with recommended setting */
> for (i = 0; i < ARRAY_SIZE(rzg2l_mipi_dsi_global_timings); ++i) {
> dphy_timings = &rzg2l_mipi_dsi_global_timings[i];
> - if (hsfreq <= dphy_timings->hsfreq_max)
> + if (hsfreq <= (dphy_timings->hsfreq_max * MILLI))
> break;
> }
>
> @@ -258,7 +260,7 @@ static void rzg2l_mipi_dsi_dphy_exit(struct rzg2l_mipi_dsi *dsi) static int
> rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
> const struct drm_display_mode *mode) {
> - unsigned long hsfreq;
> + unsigned long hsfreq, vclk_rate;
> unsigned int bpp;
> u32 txsetr;
> u32 clstptsetr;
> @@ -269,6 +271,12 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
> u32 golpbkt;
> int ret;
>
> + ret = pm_runtime_resume_and_get(dsi->dev);
> + if (ret < 0)
> + return ret;
> +
> + clk_set_rate(dsi->vclk, mode->clock * MILLI);
> /*
> * Relationship between hsclk and vclk must follow
> * vclk * bpp = hsclk * 8 * lanes
> @@ -280,13 +288,8 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
> * hsclk(bit) = hsclk(byte) * 8 = hsfreq
> */
> bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
> - hsfreq = (mode->clock * bpp) / dsi->lanes;
> -
> - ret = pm_runtime_resume_and_get(dsi->dev);
> - if (ret < 0)
> - return ret;
> -
> - clk_set_rate(dsi->vclk, mode->clock * 1000);
> + vclk_rate = clk_get_rate(dsi->vclk);
Not sure, If there is a requested vclk for example, 108.45 MHz and get_rate() is returning
only 108MHz, do we need to propagate/print this error(like requested vs actual, if there is a mismatch)
as there is change in resolution?
Otherwise LGTM
Reviewed-by: Biju Das <biju.das.jz@...renesas.com>
Cheers,
Biju
> + hsfreq = DIV_ROUND_CLOSEST_ULL(vclk_rate * bpp, dsi->lanes);
>
> ret = rzg2l_mipi_dsi_dphy_init(dsi, hsfreq);
> if (ret < 0)
> @@ -304,12 +307,12 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
> * - data lanes: maximum 4 lanes
> * Therefore maximum hsclk will be 891 Mbps.
> */
> - if (hsfreq > 445500) {
> + if (hsfreq > 445500000) {
> clkkpt = 12;
> clkbfht = 15;
> clkstpt = 48;
> golpbkt = 75;
> - } else if (hsfreq > 250000) {
> + } else if (hsfreq > 250000000) {
> clkkpt = 7;
> clkbfht = 8;
> clkstpt = 27;
> @@ -753,7 +756,7 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
> * mode->clock and format are not available. So initialize DPHY with
> * timing parameters for 80Mbps.
> */
> - ret = rzg2l_mipi_dsi_dphy_init(dsi, 80000);
> + ret = rzg2l_mipi_dsi_dphy_init(dsi, 80000000);
> if (ret < 0)
> goto err_phy;
>
> --
> 2.49.0
Powered by blists - more mailing lists