linux-kernel - Re: [PATCH RFC/WIP 1/4] arm64: dts: qcom: sm8750: Add display (MDSS) with Display CC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <9e4ba93a-d299-4813-ba18-d60563a6ce9b@quicinc.com>
Date: Sat, 3 May 2025 17:37:22 -0700
From: Abhinav Kumar <quic_abhinavk@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
CC: Konrad Dybcio <konrad.dybcio@....qualcomm.com>,
        Krzysztof Kozlowski
	<krzysztof.kozlowski@...aro.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Jessica Zhang <jesszhan@...cinc.com>,
        Abhinav Kumar <abhinavk@...cinc.com>, Abel Vesa <abel.vesa@...aro.org>,
        <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH RFC/WIP 1/4] arm64: dts: qcom: sm8750: Add display (MDSS)
 with Display CC



On 5/3/2025 2:01 PM, Dmitry Baryshkov wrote:
> On Sat, 3 May 2025 at 22:59, Abhinav Kumar <quic_abhinavk@...cinc.com> wrote:
>>
>>
>>
>> On 5/2/2025 10:51 PM, Dmitry Baryshkov wrote:
>>> On Tue, Apr 29, 2025 at 04:07:24PM -0700, Abhinav Kumar wrote:
>>>>
>>>>
>>>> On 4/28/2025 2:31 PM, Konrad Dybcio wrote:
>>>>> On 4/24/25 3:04 PM, Krzysztof Kozlowski wrote:
>>>>>> Add device nodes for entire display: MDSS, DPU, DSI, DSI PHYs,
>>>>>> DisplayPort and Display Clock Controller.
>>>>>>
>>>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
>>>>>>
>>>>>> ---
>>>>>
>>>>> [...]
>>>>>
>>>>>> +                          mdp_opp_table: opp-table {
>>>>>> +                                  compatible = "operating-points-v2";
>>>>>> +
>>>>>
>>>>> The computer tells me there's also a 156 MHz rate @ SVS_D1
>>>>>
>>>>> Maybe Abhinav could chime in whether we should add it or not
>>>>>
>>>>
>>>> Yes I also see a 156Mhz for LOW_SVS_D1 but we had a similar entry even for
>>>> sm8650 and did not publish it in the dt.
>>>>
>>>> It was present till sm8450.dtsi but dropped in sm8550/sm8650 even though
>>>> LOW_SVS_D1 is present even on those.
>>>>
>>>> I think the reason could be that the displays being used on the reference
>>>> boards will need a pixel clock of atleast >= low_svs and the MDP clock
>>>> usually depends on the value of the DSI pixel clock (which has a fixed
>>>> relationship to the byte clock) to maintain the data rate. So as a result
>>>> perhaps even if we add it, for most displays this level will be unused.
>>>>
>>>> If we end up using displays which are so small that the pixel clock
>>>> requirement will be even lower than low_svs, we can add those.
>>>>
>>>> OR as an alternative, we can leave this patch as it is and add the
>>>> low_svs_d1 for all chipsets which support it together in another series that
>>>> way it will have the full context of why we are adding it otherwise it will
>>>> look odd again of why sm8550/sm8650 was left out but added in sm8750.
>>>
>>> I think it's better to describe hardware accurately, even if the
>>> particular entry ends up being unused. I'd vote for this option.
>>>
>>>>> [...]
>>>>>
>>>>>> +                          mdss_dsi_opp_table: opp-table {
>>>>>> +                                  compatible = "operating-points-v2";
>>>>>> +
>>>>>
>>>>> Similarly there's a 140.63 MHz rate at SVS_D1, but it seems odd
>>>>> with the decimals
>>>>
>>>> For this one, yes its true that LOW_SVS_D1 is 140.63Mhz for sm8750 but this
>>>> voltage corner was somehow never used for DSI byte clock again I am thinking
>>>> this is because for the display resolutions we use, we will always be >=
>>>> low_svs so the low_svs_d1 will never hit even if we add it.
>>>
>>> Please add all voltage/frequency corners. Think about low-res DP or
>>> low-res, low-rate WB.
>>>
>>
>> Sounds good, lets go ahead and add all the voltage/freq corners.
>>
>> Like I noted, even for sm8550/sm8650 the low_svs_d1 was missed out, so
>> if we are adding it for sm8750 now in this series, a follow up patch
>> should also be sent to add them for sm8550/sm8650 as well. That way we
>> will fix them all up together and this does not come across as a
>> discrepancy.
> 
> Abhinav, if you know a missing piece, please send a patch, fixing it.
> 

Sure, I will send something next week to fix up the sm8550/sm8650 dtsi 
to add the missing opp tables unless someone beats me to it.