[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250506091145.1953-1-luyulin@eswincomputing.com>
Date: Tue, 6 May 2025 17:11:45 +0800
From: luyulin <luyulin@...incomputing.com>
To: linus.walleij@...aro.org,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
kees@...nel.org,
gustavoars@...nel.org,
brgl@...ev.pl,
linux-hardening@...r.kernel.org
Cc: zhengyu@...incomputing.com,
ningyu@...incomputing.com,
huangyifeng@...incomputing.com,
linmin@...incomputing.com,
fenglin@...incomputing.com,
lianghujun@...incomputing.com,
luyulin <luyulin@...incomputing.com>,
Samuel Holland <samuel.holland@...ive.com>
Subject: [PATCH 1/2] dt-bindings: pinctrl: eswin: Document for eic7700 SoC
This commit adds Device Tree binding documentation for the
ESWIN EIC7700 pinctrl controller module. The document describes
the required properties, compatible strings, and usage examples
in the device tree configuration when applying this module.
Co-developed-by: Samuel Holland <samuel.holland@...ive.com>
Signed-off-by: Samuel Holland <samuel.holland@...ive.com>
Signed-off-by: luyulin <luyulin@...incomputing.com>
---
.../pinctrl/eswin,eic7700-pinctrl.yaml | 156 ++++++++++++++++++
1 file changed, 156 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/eswin,eic7700-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/eswin,eic7700-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/eswin,eic7700-pinctrl.yaml
new file mode 100644
index 000000000000..d8811a8e0a51
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/eswin,eic7700-pinctrl.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/eswin,eic7700-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eswin Eic7700 Pinctrl
+
+maintainers:
+ - LuYuLin <luyulin@...incomputing.com>
+
+description: |
+ Please refer to pinctrl-bindings.txt in this directory for details of the
+ common pinctrl bindings used by client devices, including the meaning of the
+ phrase "pin configuration node".
+
+ eic7700 pin configuration nodes act as a container for an arbitrary number of
+ subnodes. Each of these subnodes represents some desired configuration for one or
+ more pins. This configuration can include the mux function to select on those pin(s),
+ and various pin configuration parameters, such as input-enable, pull-up, etc.
+
+properties:
+ compatible:
+ const: eswin,eic7700-pinctrl
+
+ reg:
+ description: Specifies the base address and size of the SLCR space.
+ maxItems: 1
+
+ "vrgmii-supply":
+ description:
+ Regulator supply for the RGMII interface IO power domain.
+ This property should reference a regulator that provides either 1.8V or 3.3V,
+ depending on the board-level voltage configuration required by the RGMII interface.
+
+patternProperties:
+ '^(.*-)?(pins)$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for pin muxes,
+ which in turn use below standard properties.
+
+ properties:
+ pins:
+ description:
+ For eic7700, specifies the name(s) of one or more pins to be configured by
+ this node.
+ items:
+ enum: [ chip_mode, mode_set0, mode_set1, mode_set2, mode_set3, xin,
+ rst_out_n, key_reset_n, gpio0, por_sel, jtag0_tck, jtag0_tms,
+ jtag0_tdi, jtag0_tdo, gpio5, spi2_cs0_n, jtag1_tck, jtag1_tms,
+ jtag1_tdi, jtag1_tdo, gpio11, spi2_cs1_n, pcie_clkreq_n,
+ pcie_wake_n, pcie_perst_n, hdmi_scl, hdmi_sda, hdmi_cec,
+ jtag2_trst, rgmii0_clk_125, rgmii0_txen, rgmii0_txclk,
+ rgmii0_txd0, rgmii0_txd1, rgmii0_txd2, rgmii0_txd3, i2s0_bclk,
+ i2s0_wclk, i2s0_sdi, i2s0_sdo, i2s_mclk, rgmii0_rxclk,
+ rgmii0_rxdv, rgmii0_rxd0, rgmii0_rxd1, rgmii0_rxd2, rgmii0_rxd3,
+ i2s2_bclk, i2s2_wclk, i2s2_sdi, i2s2_sdo, gpio27, gpio28, gpio29,
+ rgmii0_mdc, rgmii0_mdio, rgmii0_intb, rgmii1_clk_125, rgmii1_txen,
+ rgmii1_txclk, rgmii1_txd0, rgmii1_txd1, rgmii1_txd2, rgmii1_txd3,
+ i2s1_bclk, i2s1_wclk, i2s1_sdi, i2s1_sdo, gpio34, rgmii1_rxclk,
+ rgmii1_rxdv, rgmii1_rxd0, rgmii1_rxd1, rgmii1_rxd2, rgmii1_rxd3,
+ spi1_cs0_n, spi1_clk, spi1_d0, spi1_d1, spi1_d2, spi1_d3, spi1_cs1_n,
+ rgmii1_mdc, rgmii1_mdio, rgmii1_intb, usb0_pwren, usb1_pwren,
+ i2c0_scl, i2c0_sda, i2c1_scl, i2c1_sda, i2c2_scl, i2c2_sda,
+ i2c3_scl, i2c3_sda, i2c4_scl, i2c4_sda, i2c5_scl, i2c5_sda,
+ uart0_tx, uart0_rx, uart1_tx, uart1_rx, uart1_cts, uart1_rts,
+ uart2_tx, uart2_rx, jtag2_tck, jtag2_tms, jtag2_tdi, jtag2_tdo,
+ fan_pwm, fan_tach, mipi_csi0_xvs, mipi_csi0_xhs, mipi_csi0_mclk,
+ mipi_csi1_xvs, mipi_csi1_xhs, mipi_csi1_mclk, mipi_csi2_xvs,
+ mipi_csi2_xhs, mipi_csi2_mclk, mipi_csi3_xvs, mipi_csi3_xhs,
+ mipi_csi3_mclk, mipi_csi4_xvs, mipi_csi4_xhs, mipi_csi4_mclk,
+ mipi_csi5_xvs, mipi_csi5_xhs, mipi_csi5_mclk, spi3_cs_n, spi3_clk,
+ spi3_di, spi3_do, gpio92, gpio93, s_mode, gpio95, spi0_cs_n,
+ spi0_clk, spi0_d0, spi0_d1, spi0_d2, spi0_d3, i2c10_scl,
+ i2c10_sda, i2c11_scl, i2c11_sda, gpio106, boot_sel0, boot_sel1,
+ boot_sel2, boot_sel3, gpio111, lpddr_ref_clk ]
+
+ function:
+ description:
+ Specify the alternative function to be configured for the
+ given pins.
+ enum: [ disabled, boot_sel, chip_mode, emmc, fan_tach,
+ gpio, hdmi, i2c, i2s, jtag, ddr_ref_clk_sel,
+ lpddr_ref_clk, mipi_csi, osc, pcie, pwm,
+ rgmii, reset, sata, sdio, spi, s_mode, uart, usb ]
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ bias-disable: true
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ input-enable: true
+
+ input-disable: true
+
+ drive-strength-microamp: true
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ - if:
+ properties:
+ pins:
+ anyOf:
+ - pattern: '^rgmii'
+ - const: lpddr_ref_clk
+ then:
+ properties:
+ drive-strength-microamp:
+ enum: [3000, 6000, 9000, 12000, 15000, 18000, 21000, 24000]
+ else:
+ properties:
+ drive-strength-microamp:
+ enum: [6000, 9000, 12000, 15000, 18000, 21000, 24000, 27000]
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@...00080 {
+ compatible = "eswin,eic7700-pinctrl";
+ reg = <0x51600080 0x1fff80>;
+ vrgmii-supply = <&vcc_1v8>;
+ gpio10_pins: gpio10-pins {
+ pins = "jtag1_tdo";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio10_pins>;
+ };
+
+...
--
2.25.1
Powered by blists - more mailing lists