linux-kernel - [PATCH AUTOSEL 6.6 239/294] net: fec: Refactor MAC reset to function

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250505225634.2688578-239-sashal@kernel.org>
Date: Mon,  5 May 2025 18:55:39 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
	stable@...r.kernel.org
Cc: Csókás, Bence <csokas.bence@...lan.hu>,
	Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>,
	Jacob Keller <jacob.e.keller@...el.com>,
	Simon Horman <horms@...nel.org>, Csókás@....codeaurora.org,
	Paolo Abeni <pabeni@...hat.com>, Sasha Levin <sashal@...nel.org>,
	wei.fang@....com, andrew+netdev@...n.ch, davem@...emloft.net,
	edumazet@...gle.com, kuba@...nel.org, imx@...ts.linux.dev,
	netdev@...r.kernel.org
Subject: [PATCH AUTOSEL 6.6 239/294] net: fec: Refactor MAC reset to function

From: Csókás, Bence <csokas.bence@...lan.hu>

[ Upstream commit 67800d296191d0a9bde0a7776f99ca1ddfa0fc26 ]

The core is reset both in `fec_restart()` (called on link-up) and
`fec_stop()` (going to sleep, driver remove etc.). These two functions
had their separate implementations, which was at first only a register
write and a `udelay()` (and the accompanying block comment). However,
since then we got soft-reset (MAC disable) and Wake-on-LAN support, which
meant that these implementations diverged, often causing bugs.

For instance, as of now, `fec_stop()` does not check for
`FEC_QUIRK_NO_HARD_RESET`, meaning the MII/RMII mode is cleared on eg.
a PM power-down event; and `fec_restart()` missed the refactor renaming
the "magic" constant `1` to `FEC_ECR_RESET`.

To harmonize current implementations, and eliminate this source of
potential future bugs, refactor implementation to a common function.

Reviewed-by: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@...el.com>
Reviewed-by: Simon Horman <horms@...nel.org>
Signed-off-by: Csókás, Bence <csokas.bence@...lan.hu>
Link: https://patch.msgid.link/20250207121255.161146-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@...hat.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 52 +++++++++++------------
 1 file changed, 25 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 2d6b50903c923..419df6559492e 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1074,6 +1074,29 @@ static void fec_enet_enable_ring(struct net_device *ndev)
 	}
 }
 
+/* Whack a reset.  We should wait for this.
+ * For i.MX6SX SOC, enet use AXI bus, we use disable MAC
+ * instead of reset MAC itself.
+ */
+static void fec_ctrl_reset(struct fec_enet_private *fep, bool allow_wol)
+{
+	u32 val;
+
+	if (!allow_wol || !(fep->wol_flag & FEC_WOL_FLAG_SLEEP_ON)) {
+		if (fep->quirks & FEC_QUIRK_HAS_MULTI_QUEUES ||
+		    ((fep->quirks & FEC_QUIRK_NO_HARD_RESET) && fep->link)) {
+			writel(0, fep->hwp + FEC_ECNTRL);
+		} else {
+			writel(FEC_ECR_RESET, fep->hwp + FEC_ECNTRL);
+			udelay(10);
+		}
+	} else {
+		val = readl(fep->hwp + FEC_ECNTRL);
+		val |= (FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
+		writel(val, fep->hwp + FEC_ECNTRL);
+	}
+}
+
 /*
  * This function is called to start or restart the FEC during a link
  * change, transmit timeout, or to reconfigure the FEC.  The network
@@ -1090,17 +1113,7 @@ fec_restart(struct net_device *ndev)
 	if (fep->bufdesc_ex)
 		fec_ptp_save_state(fep);
 
-	/* Whack a reset.  We should wait for this.
-	 * For i.MX6SX SOC, enet use AXI bus, we use disable MAC
-	 * instead of reset MAC itself.
-	 */
-	if (fep->quirks & FEC_QUIRK_HAS_MULTI_QUEUES ||
-	    ((fep->quirks & FEC_QUIRK_NO_HARD_RESET) && fep->link)) {
-		writel(0, fep->hwp + FEC_ECNTRL);
-	} else {
-		writel(1, fep->hwp + FEC_ECNTRL);
-		udelay(10);
-	}
+	fec_ctrl_reset(fep, false);
 
 	/*
 	 * enet-mac reset will reset mac address registers too,
@@ -1354,22 +1367,7 @@ fec_stop(struct net_device *ndev)
 	if (fep->bufdesc_ex)
 		fec_ptp_save_state(fep);
 
-	/* Whack a reset.  We should wait for this.
-	 * For i.MX6SX SOC, enet use AXI bus, we use disable MAC
-	 * instead of reset MAC itself.
-	 */
-	if (!(fep->wol_flag & FEC_WOL_FLAG_SLEEP_ON)) {
-		if (fep->quirks & FEC_QUIRK_HAS_MULTI_QUEUES) {
-			writel(0, fep->hwp + FEC_ECNTRL);
-		} else {
-			writel(FEC_ECR_RESET, fep->hwp + FEC_ECNTRL);
-			udelay(10);
-		}
-	} else {
-		val = readl(fep->hwp + FEC_ECNTRL);
-		val |= (FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
-		writel(val, fep->hwp + FEC_ECNTRL);
-	}
+	fec_ctrl_reset(fep, true);
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 	writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
 
-- 
2.39.5