linux-kernel - [PATCH 1/2] phy: tegra: xusb: Decouple CYA_TRK_CODE_UPDATE_ON_IDLE from trk_hw

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250507024820.1648733-2-waynec@nvidia.com>
Date: Wed, 7 May 2025 10:48:19 +0800
From: Wayne Chang <waynec@...dia.com>
To: <waynec@...dia.com>, <jckuo@...dia.com>, <vkoul@...nel.org>,
	<kishon@...nel.org>, <thierry.reding@...il.com>, <jonathanh@...dia.com>
CC: <linux-phy@...ts.infradead.org>, <linux-tegra@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <stable@...r.kernel.org>
Subject: [PATCH 1/2] phy: tegra: xusb: Decouple CYA_TRK_CODE_UPDATE_ON_IDLE from trk_hw_mode

The logic that drives the pad calibration values resides in the
controller reset domain and so the calibration values are only being
captured when the controller is out of reset. However, by clearing the
CYA_TRK_CODE_UPDATE_ON_IDLE bit, the calibration values can be set
while the controller is in reset.

The CYA_TRK_CODE_UPDATE_ON_IDLE bit was previously cleared based on the
trk_hw_mode flag, but this dependency is not necessary. Instead,
introduce a new flag, trk_update_on_idle, to independently control this
bit.

Fixes: d8163a32ca95 ("phy: tegra: xusb: Add Tegra234 support")
Cc: stable@...r.kernel.org
Signed-off-by: Wayne Chang <waynec@...dia.com>
---
 drivers/phy/tegra/xusb-tegra186.c | 14 ++++++++------
 drivers/phy/tegra/xusb.h          |  1 +
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index fae6242aa730..dd0aaf305e90 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -650,14 +650,15 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
 		udelay(100);
 	}
 
-	if (padctl->soc->trk_hw_mode) {
-		value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
-		value |= USB2_TRK_HW_MODE;
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
+	if (padctl->soc->trk_update_on_idle)
 		value &= ~CYA_TRK_CODE_UPDATE_ON_IDLE;
-		padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
-	} else {
+	if (padctl->soc->trk_hw_mode)
+		value |= USB2_TRK_HW_MODE;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
+
+	if (!padctl->soc->trk_hw_mode)
 		clk_disable_unprepare(priv->usb2_trk_clk);
-	}
 
 	mutex_unlock(&padctl->lock);
 }
@@ -1703,6 +1704,7 @@ const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc = {
 	.supports_gen2 = true,
 	.poll_trk_completed = true,
 	.trk_hw_mode = true,
+	.trk_update_on_idle = true,
 	.supports_lp_cfg_en = true,
 };
 EXPORT_SYMBOL_GPL(tegra234_xusb_padctl_soc);
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 6e45d194c689..d2b5f9565132 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -434,6 +434,7 @@ struct tegra_xusb_padctl_soc {
 	bool need_fake_usb3_port;
 	bool poll_trk_completed;
 	bool trk_hw_mode;
+	bool trk_update_on_idle;
 	bool supports_lp_cfg_en;
 };
 
-- 
2.25.1