lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ygjn26b4g7ksxayfjs24iovndmgdrq5hvqdmanbsqpbzay3uir@zqmyrckzycps>
Date: Wed, 7 May 2025 10:52:04 +0200
From: Angelo Dureghello <adureghello@...libre.com>
To: Nuno Sá <noname.nuno@...il.com>
Cc: Jonathan Cameron <jic23@...nel.org>, 
	David Lechner <dlechner@...libre.com>, Nuno Sá <nuno.sa@...log.com>, 
	Andy Shevchenko <andy@...nel.org>, Lars-Peter Clausen <lars@...afoo.de>, 
	Michael Hennerich <Michael.Hennerich@...log.com>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, linux-iio@...r.kernel.org, 
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v3 5/5] iio: adc: ad7606: add gain calibration support

On 07.05.2025 07:14, Nuno Sá wrote:
> On Tue, 2025-05-06 at 23:03 +0200, Angelo Dureghello wrote:
> > From: Angelo Dureghello <adureghello@...libre.com>
> > 
> > Add gain calibration support, using resistor values set on devicetree,
> > values to be set accordingly with ADC external RFilter, as explained in
> > the ad7606c-16 datasheet, rev0, page 37.
> > 
> > Usage example in the fdt yaml documentation.
> > 
> > Tested-by: David Lechner <dlechner@...libre.com>
> > Reviewed-by: Nuno Sá <nuno.sa@...log.com>
> > Signed-off-by: Angelo Dureghello <adureghello@...libre.com>
> > ---
> >  drivers/iio/adc/ad7606.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++
> >  drivers/iio/adc/ad7606.h |  4 ++++
> >  2 files changed, 60 insertions(+)
> > 
> > diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> > index
> > a986eb1284106da4980ac36cb0b5990e4e3bd948..049fd8616769d32778aa238b348b2fb82fa83745
> > 100644
> > --- a/drivers/iio/adc/ad7606.c
> > +++ b/drivers/iio/adc/ad7606.c
> > @@ -33,6 +33,10 @@
> >  
> >  #include "ad7606.h"
> >  
> > +#define AD7606_CALIB_GAIN_MIN	0
> > +#define AD7606_CALIB_GAIN_STEP	1024
> > +#define AD7606_CALIB_GAIN_MAX	(63 * AD7606_CALIB_GAIN_STEP)
> > +
> >  /*
> >   * Scales are computed as 5000/32768 and 10000/32768 respectively,
> >   * so that when applied to the raw values they provide mV values.
> > @@ -125,6 +129,8 @@ static int ad7609_chan_scale_setup(struct iio_dev *indio_dev,
> >  				   struct iio_chan_spec *chan);
> >  static int ad7616_sw_mode_setup(struct iio_dev *indio_dev);
> >  static int ad7606b_sw_mode_setup(struct iio_dev *indio_dev);
> > +static int ad7606_chan_calib_gain_setup(struct iio_dev *indio_dev,
> > +					struct iio_chan_spec *chan);
> >  
> >  const struct ad7606_chip_info ad7605_4_info = {
> >  	.max_samplerate = 300 * KILO,
> > @@ -180,6 +186,7 @@ const struct ad7606_chip_info ad7606b_info = {
> >  	.scale_setup_cb = ad7606_16bit_chan_scale_setup,
> >  	.sw_setup_cb = ad7606b_sw_mode_setup,
> >  	.offload_storagebits = 32,
> > +	.calib_gain_setup_cb = ad7606_chan_calib_gain_setup,
> >  	.calib_offset_avail = ad7606_calib_offset_avail,
> >  	.calib_phase_avail = ad7606b_calib_phase_avail,
> >  };
> > @@ -195,6 +202,7 @@ const struct ad7606_chip_info ad7606c_16_info = {
> >  	.scale_setup_cb = ad7606c_16bit_chan_scale_setup,
> >  	.sw_setup_cb = ad7606b_sw_mode_setup,
> >  	.offload_storagebits = 32,
> > +	.calib_gain_setup_cb = ad7606_chan_calib_gain_setup,
> >  	.calib_offset_avail = ad7606_calib_offset_avail,
> >  	.calib_phase_avail = ad7606c_calib_phase_avail,
> >  };
> > @@ -246,6 +254,7 @@ const struct ad7606_chip_info ad7606c_18_info = {
> >  	.scale_setup_cb = ad7606c_18bit_chan_scale_setup,
> >  	.sw_setup_cb = ad7606b_sw_mode_setup,
> >  	.offload_storagebits = 32,
> > +	.calib_gain_setup_cb = ad7606_chan_calib_gain_setup,
> >  	.calib_offset_avail = ad7606c_18bit_calib_offset_avail,
> >  	.calib_phase_avail = ad7606c_calib_phase_avail,
> >  };
> > @@ -357,6 +366,49 @@ static int ad7606_get_chan_config(struct iio_dev *indio_dev,
> > int ch,
> >  	return 0;
> >  }
> >  
> > +static int ad7606_chan_calib_gain_setup(struct iio_dev *indio_dev,
> > +					struct iio_chan_spec *chan)
> > +{
> > +	struct ad7606_state *st = iio_priv(indio_dev);
> > +	unsigned int num_channels = st->chip_info->num_adc_channels;
> > +	struct device *dev = st->dev;
> > +	int ret;
> > +
> > +	device_for_each_child_node_scoped(dev, child) {
> > +		u32 reg, r_gain;
> > +
> > +		ret = fwnode_property_read_u32(child, "reg", &reg);
> > +		if (ret)
> > +			return ret;
> > +
> > +		/* channel number (here) is from 1 to num_channels */
> > +		if (reg < 1 || reg > num_channels) {
> > +			dev_warn(dev, "wrong ch number (ignoring): %d\n", reg);
> > +			continue;
> > +		}
> > +
> 
> Sorry Angelo, just realized this now. Any reason for not treating the above as a real
> invalid argument? It's minor and not a big deal but odd enough...
> 
> - Nuno Sá

Hi Nuno,

no problem, feel free to comment,
 
Main reason is that on a wrong fdt channel node, continue does not stop
the parsing of other maybe correct channel nodes.

Regards,
angelo

> 
> > +		ret = fwnode_property_read_u32(child, "adi,rfilter-ohms",
> > +					       &r_gain);
> > +		if (ret == -EINVAL)
> > +			/* Keep the default register value. */
> > +			continue;
> > +		if (ret)
> > +			return ret;
> > +
> > +		if (r_gain > AD7606_CALIB_GAIN_MAX)
> > +			return dev_err_probe(st->dev, -EINVAL,
> > +					     "wrong gain calibration value.");
> > +
> > +		/* Chan reg is 1-based index. */
> > +		ret = st->bops->reg_write(st, AD7606_CALIB_GAIN(reg - 1),
> > +			DIV_ROUND_CLOSEST(r_gain, AD7606_CALIB_GAIN_STEP));
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> >  static int ad7606c_18bit_chan_scale_setup(struct iio_dev *indio_dev,
> >  					  struct iio_chan_spec *chan)
> >  {
> > @@ -1410,6 +1462,10 @@ static int ad7606_probe_channels(struct iio_dev *indio_dev)
> >  				chan->info_mask_separate_available |=
> >  					BIT(IIO_CHAN_INFO_CALIBBIAS) |
> >  					BIT(IIO_CHAN_INFO_CONVDELAY);
> > +				ret = st->chip_info->calib_gain_setup_cb(
> > +					indio_dev, chan);
> > +				if (ret)
> > +					return ret;
> >  			}
> >  
> >  			/*
> > diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
> > index
> > f613583a7fa4095115b0b28e3f8e51cd32b93524..94165d217b69d54cbce9109b8c0f9dc0237cf304
> > 100644
> > --- a/drivers/iio/adc/ad7606.h
> > +++ b/drivers/iio/adc/ad7606.h
> > @@ -50,6 +50,8 @@ struct ad7606_state;
> >  typedef int (*ad7606_scale_setup_cb_t)(struct iio_dev *indio_dev,
> >  				       struct iio_chan_spec *chan);
> >  typedef int (*ad7606_sw_setup_cb_t)(struct iio_dev *indio_dev);
> > +typedef int (*ad7606_calib_gain_setup_cb_t)(struct iio_dev *indio_dev,
> > +					    struct iio_chan_spec *chan);
> >  
> >  /**
> >   * struct ad7606_chip_info - chip specific information
> > @@ -66,6 +68,7 @@ typedef int (*ad7606_sw_setup_cb_t)(struct iio_dev *indio_dev);
> >   * @init_delay_ms:	required delay in milliseconds for initialization
> >   *			after a restart
> >   * @offload_storagebits: storage bits used by the offload hw implementation
> > + * @calib_gain_setup_cb: callback to setup of gain calibration for each channel
> >   * @calib_offset_avail: pointer to offset calibration range/limits array
> >   * @calib_phase_avail:  pointer to phase calibration range/limits array
> >   */
> > @@ -81,6 +84,7 @@ struct ad7606_chip_info {
> >  	bool				os_req_reset;
> >  	unsigned long			init_delay_ms;
> >  	u8				offload_storagebits;
> > +	ad7606_calib_gain_setup_cb_t	calib_gain_setup_cb;
> >  	const int			*calib_offset_avail;
> >  	const int			(*calib_phase_avail)[2];
> >  };
> > 
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ