linux-kernel - [PATCH v2 3/6] arm64: dts: qcom: qcs615: Add mproc node for SEMP2P

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250507-add_qcs615_remoteproc_support-v2-3-52ac6cb43a39@quicinc.com>
Date: Wed, 7 May 2025 18:26:13 +0800
From: Lijuan Gao <quic_lijuang@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
        Mathieu Poirier
	<mathieu.poirier@...aro.org>,
        Rob Herring <robh@...nel.org>,
        "Krzysztof
 Kozlowski" <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        Konrad Dybcio
	<konradybcio@...nel.org>
CC: <kernel@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
        <linux-remoteproc@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Lijuan Gao <quic_lijuang@...cinc.com>,
        "Kyle
 Deng" <quic_chunkaid@...cinc.com>
Subject: [PATCH v2 3/6] arm64: dts: qcom: qcs615: Add mproc node for SEMP2P

From: Kyle Deng <quic_chunkaid@...cinc.com>

The Shared Memory Point to Point (SMP2P) protocol facilitates
communication of a single 32-bit value between two processors.
Add these two nodes for remoteproc enablement on QCS615 SoC.

Signed-off-by: Kyle Deng <quic_chunkaid@...cinc.com>
Signed-off-by: Lijuan Gao <quic_lijuang@...cinc.com>
---
 arch/arm64/boot/dts/qcom/qcs615.dtsi | 43 ++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index 7c377f3402c1..53661e3a852e 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -332,6 +332,49 @@ mc_virt: interconnect-2 {
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
 	qup_opp_table: opp-table-qup {
 		compatible = "operating-points-v2";
 		opp-shared;

-- 
2.46.0