lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250509152940.2004660-1-ioana.ciornei@nxp.com>
Date: Fri,  9 May 2025 18:29:34 +0300
From: Ioana Ciornei <ioana.ciornei@....com>
To: lee@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	shawnguo@...nel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Cc: vladimir.oltean@....com,
	Ioana Ciornei <ioana.ciornei@....com>
Subject: [PATCH v2 0/6] mfd: simple-mfd-i2c: add QIXIS CPLD support

The MDIO mux on the LX2160AQDS, LX2162AQDS and LS1028AQDS boards never
worked in mainline. The DT files were submitted initially as-is, and
there is a downstream driver for the QIXIS CPLD device:
https://github.com/nxp-qoriq/linux/blob/lf-6.12.y/drivers/soc/fsl/qixis_ctrl.c

Since the HW works with the already existing
driver/mfd/similar-mfd-i2c.c driver, extend the list of compatible
strings to also cover these 3 new boards, instead of trying to upstream
a duplicate driver.

This patch set also adapts the DT nodes for each of the affected boards
so that we match on the new compatible strings. Since we want the QIXIS
CPLD to have child nodes with "reg" and the current format lacks that,
change the compatible string so that we make it clear that by using the
simple-mfd-i2c driver we expect dt nodes children with the reg property.

Since the QDS (QorIQ Development System) boards are not made to deploy
any production software on them, but rather made to be used exclusively
by engineers to test/prototype SoC features, breaking compatibility with
device trees is not an issue.

The last patch describes the two on-board RGMII PHYs found on the
LX2160AQDS boards which make use of the MDIO bus found behind the CPLD
driven MDIO mux.

Changes in v2:
- 1/6: renamed the compatible strings so that it does not mention the i2c
  part, which is redundant
- 1/6: remove the description from the reg property
- 1/6: reordered the properties when mentioned in the required section
- 1/6: updated the example so that it actually reflects the expected DT
- 2/6: use the new compatible strings
- 3,4,5/6: updated the commit message to explain better the context
- 3,4,5/6: used the new compatible string


Ioana Ciornei (5):
  dt-bindings: mfd: add bindings for QIXIS CPLD
  mfd: simple-mfd-i2c: add compatible string for Layerscape QIXIS CPLD
  arm64: dts: lx2160a-qds: make the QIXIS CPLD use the simple-mfd-i2c.c
    driver
  arm64: dts: lx2162a-qds: make the QIXIS CPLD use the simple-mfd-i2c.c
    driver
  arm64: dts: lx2160a-qds: add the two on-board RGMII PHYs

Vladimir Oltean (1):
  arm64: dts: ls1028a-qds: make the QIXIS CPLD use the simple-mfd-i2c.c
    driver

 .../mfd/fsl,ls1028a-qds-qixis-cpld.yaml       | 65 +++++++++++++++++++
 .../boot/dts/freescale/fsl-ls1028a-qds.dts    |  9 +--
 .../boot/dts/freescale/fsl-lx2160a-qds.dts    | 28 +++++++-
 .../boot/dts/freescale/fsl-lx2162a-qds.dts    |  8 ++-
 drivers/mfd/simple-mfd-i2c.c                  |  3 +
 5 files changed, 103 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/fsl,ls1028a-qds-qixis-cpld.yaml

-- 
2.25.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ