[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <D9RQN76VZXO8.T3I0046FNVG3@cknow.org>
Date: Fri, 09 May 2025 17:34:21 +0200
From: "Diederik de Haas" <didi.debian@...ow.org>
To: "Chukun Pan" <amadeus@....edu.cn>, "Heiko Stuebner" <heiko@...ech.de>
Cc: "Conor Dooley" <conor+dt@...nel.org>, "Krzysztof Kozlowski"
<krzk+dt@...nel.org>, "Dragan Simic" <dsimic@...jaro.org>, "Rob Herring"
<robh@...nel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-rockchip@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>
Subject: Re: [PATCH 0/1] arm64: dts: rockchip: rk3568: Move PCIe3 MSI to use
GIC ITS
Hi,
On Sat Mar 8, 2025 at 10:30 AM CET, Chukun Pan wrote:
> For a long time, rk3568's MSI-X had bugs and could only work on one node.
> e.g. [ 7.250882] r8125 0002:01:00.0: no MSI/MSI-X. Back to INTx.
>
> Now the ITS of GICv3 on rk3568 has been fixed by commit b08e2f42e86b
> ("irqchip/gic-v3-its: Share ITS tables with a non-trusted hypervisor")
> and commit 2d81e1bb6252 ("irqchip/gic-v3: Add Rockchip 3568002 erratum
> workaround").
>
> Following commit b956c9de9175 ("arm64: dts: rockchip: rk356x: Move
> PCIe MSI to use GIC ITS instead of MBI"), change the PCIe3 controller's
> MSI on rk3568 to use ITS, so that all MSI-X can work properly.
>
> ~# dmesg | grep -E 'GIC|ITS'
> <snip>
>
> ~# lspci -v | grep MSI-X
> Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
> Capabilities: [b0] MSI-X: Enable- Count=128 Masked-
> Capabilities: [b0] MSI-X: Enable+ Count=32 Masked-
> Capabilities: [b0] MSI-X: Enable- Count=128 Masked-
> Capabilities: [b0] MSI-X: Enable+ Count=32 Masked-
I tested this patch on my NanoPi R5S with a 6.15-rc3 kernel + a number
of [vcc|phy]-supply patches that have been accepted for 6.16 (and a
small WIP LED patch).
With this patch I get the following kernel warnings:
pci 0001:10:00.0: Primary bus is hard wired to 0
pci 0002:20:00.0: Primary bus is hard wired to 0
If I 'unapply' this patch, I don't see those warnings.
The output of the above mentioned ``dmesg`` and ``lspci`` commands is
exactly the same in both cases.
The PCI IDs refer to:
PCI bridge: Rockchip Electronics Co., Ltd RK3568 Remote Signal Processor (rev 01)
It's possible that this patch only brought a(nother) problem to light,
but was I supposed to see an improvement and if so where/how?
Cheers,
Diederik
> Chukun Pan (1):
> arm64: dts: rockchip: rk3568: Move PCIe3 MSI to use GIC ITS
>
> arch/arm64/boot/dts/rockchip/rk3568.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists