linux-kernel - [PATCH 2/2] PCI: brcmstb: Use "num-lanes" DT property if present

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250509222815.7082-3-james.quinlan@broadcom.com>
Date: Fri,  9 May 2025 18:28:13 -0400
From: Jim Quinlan <james.quinlan@...adcom.com>
To: linux-pci@...r.kernel.org,
	Nicolas Saenz Julienne <nsaenz@...nel.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
	bcm-kernel-feedback-list@...adcom.com,
	jim2101024@...il.com,
	james.quinlan@...adcom.com
Cc: Florian Fainelli <florian.fainelli@...adcom.com>,
	Lorenzo Pieralisi <lpieralisi@...nel.org>,
	Krzysztof Wilczyński <kw@...ux.com>,
	Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
	Rob Herring <robh@...nel.org>,
	linux-rpi-kernel@...ts.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE),
	linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE),
	linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 2/2] PCI: brcmstb: Use "num-lanes" DT property if present

By default, we use automatic HW negotiation to ascertain the number of
lanes of the PCIe connection.  If the "num-lanes" DT property is present,
assume that the chip's built-in capability information is incorrect or
undesired, and use the specified value instead.

Signed-off-by: Jim Quinlan <james.quinlan@...adcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index e19628e13898..76fd4f515898 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -46,6 +46,7 @@
 #define  PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK	0xffffff
 
 #define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY			0x04dc
+#define  PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK	0x1f0
 #define  PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK	0xc00
 
 #define PCIE_RC_CFG_PRIV1_ROOT_CAP			0x4f8
@@ -55,6 +56,9 @@
 #define PCIE_RC_DL_MDIO_WR_DATA				0x1104
 #define PCIE_RC_DL_MDIO_RD_DATA				0x1108
 
+#define PCIE_RC_PL_REG_PHY_CTL_1			0x1804
+#define  PCIE_RC_PL_REG_PHY_CTL_1_REG_P2_POWERDOWN_ENA_NOSYNC_MASK	0x8
+
 #define PCIE_RC_PL_PHY_CTL_15				0x184c
 #define  PCIE_RC_PL_PHY_CTL_15_DIS_PLL_PD_MASK		0x400000
 #define  PCIE_RC_PL_PHY_CTL_15_PM_CLK_PERIOD_MASK	0xff
@@ -1072,7 +1076,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	void __iomem *base = pcie->base;
 	struct pci_host_bridge *bridge;
 	struct resource_entry *entry;
-	u32 tmp, burst, aspm_support;
+	u32 tmp, burst, aspm_support, num_lanes, num_lanes_cap;
 	u8 num_out_wins = 0;
 	int num_inbound_wins = 0;
 	int memc, ret;
@@ -1180,6 +1184,26 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 		PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
 	writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
 
+	/* 'tmp' still holds the contents of PRIV1_LINK_CAPABILITY */
+	num_lanes_cap = u32_get_bits(tmp, PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK);
+	num_lanes = 0;
+	/*
+	 * Use automatic num-lanes HW negotiation by default.  If the
+	 * "num-lanes" DT property is present, assume that the chip's
+	 * built-in link width capability information is
+	 * incorrect/undesired and use the specified value instead.
+	 */
+	if (!of_property_read_u32(pcie->np, "num-lanes", &num_lanes) &&
+	    num_lanes && num_lanes_cap != num_lanes) {
+		u32p_replace_bits(&tmp, num_lanes,
+			PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK);
+		writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
+		tmp = readl(base + PCIE_RC_PL_REG_PHY_CTL_1);
+		u32p_replace_bits(&tmp, 1,
+			PCIE_RC_PL_REG_PHY_CTL_1_REG_P2_POWERDOWN_ENA_NOSYNC_MASK);
+		writel(tmp, base + PCIE_RC_PL_REG_PHY_CTL_1);
+	}
+
 	/*
 	 * For config space accesses on the RC, show the right class for
 	 * a PCIe-PCIe bridge (the default setting is to be EP mode).
-- 
2.43.0