lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6nfpd4jvx7dmpl5hqk5nokxprxbcccah66x2mptgwxtyxmb74r@qiosxhaw3tew>
Date: Fri, 9 May 2025 01:32:39 -0400
From: Seyediman Seyedarab <imandevel@...il.com>
To: Viresh Kumar <viresh.kumar@...aro.org>
Cc: rafael@...nel.org, linux-pm@...r.kernel.org, 
	linux-kernel@...r.kernel.org, skhan@...uxfoundation.org, linux-kernel-mentees@...ts.linux.dev
Subject: Re: [PATCH v3] cpufreq: fix locking order in store_local_boost to
 prevent deadlock

On 25/05/02 10:36AM, Viresh Kumar wrote:
> On 30-04-25, 12:09, Seyediman Seyedarab wrote:
> > Lockdep reports a possible circular locking dependency[1] when
> > writing to /sys/devices/system/cpu/cpufreq/policyN/boost,
> > triggered by power-profiles-daemon at boot.
> > 
> > store_local_boost() used to acquire cpu_hotplug_lock *after*
> > the policy lock had already been taken by the store() handler.
> > However, the expected locking hierarchy is to acquire
> > cpu_hotplug_lock before the policy guard. This inverted lock order
> > creates a *theoretical* deadlock possibility.
> > 
> > Acquire cpu_hotplug_lock in the store() handler *only* for the
> > local_boost attribute, before entering the policy guard block,
> > and remove the cpus_read_lock/unlock() calls from store_local_boost().
> > Also switch from guard() to scoped_guard() to allow explicitly wrapping
> > the policy guard inside the cpu_hotplug_lock critical section.
> > 
> >  [1]
> >  ======================================================
> >  WARNING: possible circular locking dependency detected
> >  6.15.0-rc4-debug #28 Not tainted
> >  ------------------------------------------------------
> >  power-profiles-/596 is trying to acquire lock:
> >  ffffffffb147e910 (cpu_hotplug_lock){++++}-{0:0}, at: store_local_boost+0x6a/0xd0
> > 
> >  but task is already holding lock:
> >  ffff9eaa48377b80 (&policy->rwsem){++++}-{4:4}, at: store+0x37/0x90
> > 
> >  which lock already depends on the new lock.
> > 
> >  the existing dependency chain (in reverse order) is:
> > 
> >  -> #2 (&policy->rwsem){++++}-{4:4}:
> >         down_write+0x29/0xb0
> >         cpufreq_online+0x841/0xa00
> >         cpufreq_add_dev+0x71/0x80
> >         subsys_interface_register+0x14b/0x170
> >         cpufreq_register_driver+0x154/0x250
> >         amd_pstate_register_driver+0x36/0x70
> >         amd_pstate_init+0x1e7/0x270
> >         do_one_initcall+0x67/0x2c0
> >         kernel_init_freeable+0x230/0x270
> >         kernel_init+0x15/0x130
> >         ret_from_fork+0x2c/0x50
> >         ret_from_fork_asm+0x11/0x20
> > 
> >  -> #1 (subsys mutex#3){+.+.}-{4:4}:
> >         __mutex_lock+0xc2/0x930
> >         subsys_interface_register+0x83/0x170
> >         cpufreq_register_driver+0x154/0x250
> >         amd_pstate_register_driver+0x36/0x70
> >         amd_pstate_init+0x1e7/0x270
> >         do_one_initcall+0x67/0x2c0
> >         kernel_init_freeable+0x230/0x270
> >         kernel_init+0x15/0x130
> >         ret_from_fork+0x2c/0x50
> >         ret_from_fork_asm+0x11/0x20
> > 
> >  -> #0 (cpu_hotplug_lock){++++}-{0:0}:
> >         __lock_acquire+0x1087/0x17e0
> >         lock_acquire.part.0+0x66/0x1b0
> >         cpus_read_lock+0x2a/0xc0
> >         store_local_boost+0x6a/0xd0
> >         store+0x50/0x90
> >         kernfs_fop_write_iter+0x135/0x200
> >         vfs_write+0x2ab/0x540
> >         ksys_write+0x6c/0xe0
> >         do_syscall_64+0xbb/0x1d0
> >         entry_SYSCALL_64_after_hwframe+0x56/0x5e
> > 
> > Signed-off-by: Seyediman Seyedarab <ImanDevel@...il.com>
> > ---
> > Changes in v3:
> >  - Rebased over PM tree's linux-next branch
> >  - Added a comment to explain why this piece of code is required
> >  - Switched from guard() to scoped_guard() to allow explicitly wrapping
> >    the policy guard inside the cpu_hotplug_lock critical section.
> > 
> > Changes in v2:
> >  - Restrict cpu_hotplug_lock acquisition to only
> >    the local_boost attribute in store() handler.
> > 
> > Regards,
> > Seyediman
> > 
> >  drivers/cpufreq/cpufreq.c | 23 ++++++++++++++++-------
> >  1 file changed, 16 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
> > index 21fa733a2..b349adbeb 100644
> > --- a/drivers/cpufreq/cpufreq.c
> > +++ b/drivers/cpufreq/cpufreq.c
> > @@ -622,10 +622,7 @@ static ssize_t store_local_boost(struct cpufreq_policy *policy,
> >  	if (!policy->boost_supported)
> >  		return -EINVAL;
> >  
> > -	cpus_read_lock();
> >  	ret = policy_set_boost(policy, enable);
> > -	cpus_read_unlock();
> > -
> >  	if (!ret)
> >  		return count;
> >  
> > @@ -1006,16 +1003,28 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
> >  {
> >  	struct cpufreq_policy *policy = to_policy(kobj);
> >  	struct freq_attr *fattr = to_attr(attr);
> > +	int ret = -EBUSY;
> >  
> >  	if (!fattr->store)
> >  		return -EIO;
> >  
> > -	guard(cpufreq_policy_write)(policy);
> > +	/*
> > +	 * store_local_boost() requires cpu_hotplug_lock to be held, and must be
> > +	 * called with that lock acquired *before* taking policy->rwsem to avoid
> > +	 * lock ordering violations.
> > +	 */
> > +	if (fattr == &local_boost)
> > +		cpus_read_lock();
> >  
> > -	if (likely(!policy_is_inactive(policy)))
> > -		return fattr->store(policy, buf, count);
> > +	scoped_guard(cpufreq_policy_write, policy) {
> > +		if (likely(!policy_is_inactive(policy)))
> > +			ret = fattr->store(policy, buf, count);
> > +	}
> >  
> > -	return -EBUSY;
> > +	if (fattr == &local_boost)
> > +		cpus_read_unlock();
> > +
> > +	return ret;
> >  }
> 
> Acked-by: Viresh Kumar <viresh.kumar@...aro.org>
> 
> -- 
> viresh

Hi there,

Just following up to see if there's anything you'd like me to
change or address in the patch before it can move forward.
Please let me know if any updates are needed.

Regards,
Seyediman

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ