[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250509-topic-misc-shift6-panel-v2-2-c2c2d52abd51@linaro.org>
Date: Fri, 09 May 2025 10:59:40 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Jessica Zhang <quic_jesszhan@...cinc.com>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Abhinav Kumar <quic_abhinavk@...cinc.com>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Casey Connolly <casey.connolly@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>
Subject: [PATCH v2 2/6] drm/panel: visionox-rm69299: add plumbing to
support panel variants
In order to support a panel variant, add plumbing code to pass
init sequence and mode as compatible data.
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
drivers/gpu/drm/panel/panel-visionox-rm69299.c | 58 ++++++++++++++------------
1 file changed, 32 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
index be3a9797fbced5222b313cf83f8078b919e2c219..156bca0197481b470fa85b2eab7c979b76e489b6 100644
--- a/drivers/gpu/drm/panel/panel-visionox-rm69299.c
+++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
@@ -5,6 +5,7 @@
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/property.h>
#include <linux/mod_devicetable.h>
#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
@@ -15,11 +16,22 @@
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
+struct visionox_rm69299_panel_desc {
+ const struct drm_display_mode *mode;
+ const u8 *init_seq;
+ unsigned int init_seq_len;
+};
+
struct visionox_rm69299 {
struct drm_panel panel;
struct regulator_bulk_data supplies[2];
struct gpio_desc *reset_gpio;
struct mipi_dsi_device *dsi;
+ const struct visionox_rm69299_panel_desc *desc;
+};
+
+static const u8 visionox_rm69299_1080x2248_60hz_init_seq[][2] = {
+ { 0xfe, 0x00 }, { 0xc2, 0x08 }, { 0x35, 0x00 }, { 0x51, 0xff },
};
static inline struct visionox_rm69299 *panel_to_ctx(struct drm_panel *panel)
@@ -84,7 +96,7 @@ static int visionox_rm69299_unprepare(struct drm_panel *panel)
static int visionox_rm69299_prepare(struct drm_panel *panel)
{
struct visionox_rm69299 *ctx = panel_to_ctx(panel);
- int ret;
+ int ret, i;
ret = visionox_rm69299_power_on(ctx);
if (ret < 0)
@@ -92,28 +104,12 @@ static int visionox_rm69299_prepare(struct drm_panel *panel)
ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
- ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xfe, 0x00 }, 2);
- if (ret < 0) {
- dev_err(ctx->panel.dev, "cmd set tx 0 failed, ret = %d\n", ret);
- goto power_off;
- }
-
- ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xc2, 0x08 }, 2);
- if (ret < 0) {
- dev_err(ctx->panel.dev, "cmd set tx 1 failed, ret = %d\n", ret);
- goto power_off;
- }
-
- ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x35, 0x00 }, 2);
- if (ret < 0) {
- dev_err(ctx->panel.dev, "cmd set tx 2 failed, ret = %d\n", ret);
- goto power_off;
- }
-
- ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x51, 0xff }, 2);
- if (ret < 0) {
- dev_err(ctx->panel.dev, "cmd set tx 3 failed, ret = %d\n", ret);
- goto power_off;
+ for (i = 0; i < ctx->desc->init_seq_len; i++) {
+ ret = mipi_dsi_dcs_write_buffer(ctx->dsi, &ctx->desc->init_seq[i * 2], 2);
+ if (ret < 0) {
+ dev_err(ctx->panel.dev, "cmd tx failed, ret = %d\n", ret);
+ return ret;
+ }
}
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
@@ -160,8 +156,7 @@ static int visionox_rm69299_get_modes(struct drm_panel *panel,
struct visionox_rm69299 *ctx = panel_to_ctx(panel);
struct drm_display_mode *mode;
- mode = drm_mode_duplicate(connector->dev,
- &visionox_rm69299_1080x2248_60hz);
+ mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
if (!mode) {
dev_err(ctx->panel.dev, "failed to create a new display mode\n");
return 0;
@@ -191,6 +186,10 @@ static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
if (!ctx)
return -ENOMEM;
+ ctx->desc = device_get_match_data(dev);
+ if (!ctx->desc)
+ return -EINVAL;
+
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dsi = dsi;
@@ -239,8 +238,15 @@ static void visionox_rm69299_remove(struct mipi_dsi_device *dsi)
drm_panel_remove(&ctx->panel);
}
+const struct visionox_rm69299_panel_desc visionox_rm69299_1080p_display_desc = {
+ .mode = &visionox_rm69299_1080x2248_60hz,
+ .init_seq = (const u8 *)visionox_rm69299_1080x2248_60hz_init_seq,
+ .init_seq_len = ARRAY_SIZE(visionox_rm69299_1080x2248_60hz_init_seq),
+};
+
static const struct of_device_id visionox_rm69299_of_match[] = {
- { .compatible = "visionox,rm69299-1080p-display", },
+ { .compatible = "visionox,rm69299-1080p-display",
+ .data = &visionox_rm69299_1080p_display_desc },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, visionox_rm69299_of_match);
--
2.34.1
Powered by blists - more mailing lists