linux-kernel - [PATCH 12/14] dt-bindings: spi: dspi: Add S32G support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250509-james-nxp-spi-v1-12-32bfcd2fea11@linaro.org>
Date: Fri, 09 May 2025 12:05:59 +0100
From: James Clark <james.clark@...aro.org>
To: Vladimir Oltean <olteanv@...il.com>, Mark Brown <broonie@...nel.org>, 
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Frank Li <Frank.Li@....com>, 
 Chester Lin <chester62515@...il.com>, Matthias Brugger <mbrugger@...e.com>, 
 Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>, 
 NXP S32 Linux Team <s32@....com>, Shawn Guo <shawnguo@...nel.org>, 
 Sascha Hauer <s.hauer@...gutronix.de>, 
 Pengutronix Kernel Team <kernel@...gutronix.de>, 
 Fabio Estevam <festevam@...il.com>, larisa.grigore@....com, arnd@...aro.org, 
 andrei.stefanescu@....com, dan.carpenter@...aro.org
Cc: linux-spi@...r.kernel.org, imx@...ts.linux.dev, 
 linux-kernel@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, 
 Ciprian Marian Costea <ciprianmarian.costea@....com>, 
 James Clark <james.clark@...aro.org>
Subject: [PATCH 12/14] dt-bindings: spi: dspi: Add S32G support

From: Ciprian Marian Costea <ciprianmarian.costea@....com>

Document S32G compatible strings. 's32g2' and 's32g3' use the same
driver so 's32g2' must follow 's32g3'.

The SPI controller node in dts can define both host and target pinctrl.
The selection between them will be done based on pinctrl-names. The
default pinctrl will be loaded first and will be used by the host. If
the controller is configured as target (spi-slave property is added in
the dts node), the driver will look for the "slave" pinctrl and apply it
if found.

Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@....com>
Signed-off-by: Larisa Grigore <larisa.grigore@....com>
Signed-off-by: James Clark <james.clark@...aro.org>
---
 Documentation/devicetree/bindings/spi/fsl,dspi.yaml | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/fsl,dspi.yaml b/Documentation/devicetree/bindings/spi/fsl,dspi.yaml
index 7ca8fceda717..b5fac0bb142a 100644
--- a/Documentation/devicetree/bindings/spi/fsl,dspi.yaml
+++ b/Documentation/devicetree/bindings/spi/fsl,dspi.yaml
@@ -23,6 +23,7 @@ properties:
           - fsl,ls2080a-dspi
           - fsl,ls2085a-dspi
           - fsl,lx2160a-dspi
+          - nxp,s32g2-dspi
       - items:
           - enum:
               - fsl,ls1012a-dspi
@@ -37,6 +38,9 @@ properties:
       - items:
           - const: fsl,lx2160a-dspi
           - const: fsl,ls2085a-dspi
+      - items:
+          - const: nxp,s32g3-dspi
+          - const: nxp,s32g2-dspi
 
   reg:
     maxItems: 1
@@ -114,3 +118,17 @@ examples:
                 spi-cs-hold-delay-ns = <50>;
         };
     };
+  # S32G3 in target mode
+  - |
+    spi0: spi@...d4000 {
+        compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+        reg = <0x401d4000 0x1000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 26>;
+        clock-names = "dspi";
+        spi-num-chipselects = <8>;
+        bus-num = <0>;
+        dmas = <&edma0 0 7>, <&edma0 0 8>;
+        dma-names = "tx", "rx";
+        spi-slave;
+    };

-- 
2.34.1