lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <D9RN1HZAXH1M.3H228KWQJ9CR0@cknow.org>
Date: Fri, 09 May 2025 14:44:57 +0200
From: "Diederik de Haas" <didi.debian@...ow.org>
To: "Sebastian Reichel" <sebastian.reichel@...labora.com>, "Heiko Stuebner"
 <heiko@...ech.de>
Cc: "Rob Herring" <robh@...nel.org>, "Krzysztof Kozlowski"
 <krzk+dt@...nel.org>, "Conor Dooley" <conor+dt@...nel.org>,
 <devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
 <linux-rockchip@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
 <kernel@...labora.com>
Subject: Re: [PATCH v2 2/5] arm64: dts: rockchip: move rock 5b to include
 file

Hi,

On Thu May 8, 2025 at 7:48 PM CEST, Sebastian Reichel wrote:
> Radxa released some more boards, which are based on the original
> Rock 5B. Move its board description into an include file to avoid
> unnecessary duplication.

Aren't you moving it *out of* an/the include file?
If so, the patch Subject and the above line should be updated so that
they correctly reflect what is changed in this patch.

The above text is correct (and the same ...) as patch 1, but in this
patch you move things out of the dtsi which are unique per board.

> NOTE: this should be merged with the previous commit to ensure
> bisectability. The rename happens in a separete commit during
> development because git does not properly detect the rename when
> the original filename is reused in the same commit. This means
>
> 1. it's a lot harder to review the changes
> 2. it's a lot harder to rebase the patch series

Or did I fall prey to the exact thing you described here?

Cheers,
  Diederik

> Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts  | 52 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi | 40 ------------------
>  2 files changed, 52 insertions(+), 40 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> new file mode 100644
> index 0000000000000000000000000000000000000000..9407a7c9910ada1f6c803d2e15785a9cbd9bd655
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> @@ -0,0 +1,52 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3588-rock-5b.dtsi"
> +
> +/ {
> +	model = "Radxa ROCK 5B";
> +	compatible = "radxa,rock-5b", "rockchip,rk3588";
> +};
> +
> +&sdio {
> +	max-frequency = <200000000>;
> +	no-sd;
> +	no-mmc;
> +	non-removable;
> +	bus-width = <4>;
> +	cap-sdio-irq;
> +	disable-wp;
> +	keep-power-in-suspend;
> +	wakeup-source;
> +	sd-uhs-sdr12;
> +	sd-uhs-sdr25;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc3v3_pcie2x1l0>;
> +	vqmmc-supply = <&vcc_1v8_s3>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdiom0_pins>;
> +	status = "okay";
> +};
> +
> +&uart6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	usb {
> +		vcc5v0_host_en: vcc5v0-host-en {
> +			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&vcc5v0_host {
> +	enable-active-high;
> +	gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&vcc5v0_host_en>;
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
> index 17f4fd054cd3d1c4e23ccfe014a9c4b9d7ad1a06..6052787d2560978d2bae6cfbeea5fc1d419d583a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
> @@ -8,9 +8,6 @@
>  #include "rk3588.dtsi"
>  
>  / {
> -	model = "Radxa ROCK 5B";
> -	compatible = "radxa,rock-5b", "rockchip,rk3588";
> -
>  	aliases {
>  		mmc0 = &sdhci;
>  		mmc1 = &sdmmc;
> @@ -139,10 +136,6 @@ vcc5v0_host: regulator-vcc5v0-host {
>  		regulator-always-on;
>  		regulator-min-microvolt = <5000000>;
>  		regulator-max-microvolt = <5000000>;
> -		enable-active-high;
> -		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&vcc5v0_host_en>;
>  		vin-supply = <&vcc5v0_sys>;
>  	};
>  
> @@ -488,12 +481,6 @@ pcie3_vcc3v3_en: pcie3-vcc3v3-en {
>  			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
>  	};
> -
> -	usb {
> -		vcc5v0_host_en: vcc5v0-host-en {
> -			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> -		};
> -	};
>  };
>  
>  &pwm1 {
> @@ -530,27 +517,6 @@ &sdmmc {
>  	status = "okay";
>  };
>  
> -&sdio {
> -	max-frequency = <200000000>;
> -	no-sd;
> -	no-mmc;
> -	non-removable;
> -	bus-width = <4>;
> -	cap-sdio-irq;
> -	disable-wp;
> -	keep-power-in-suspend;
> -	wakeup-source;
> -	sd-uhs-sdr12;
> -	sd-uhs-sdr25;
> -	sd-uhs-sdr50;
> -	sd-uhs-sdr104;
> -	vmmc-supply = <&vcc3v3_pcie2x1l0>;
> -	vqmmc-supply = <&vcc_1v8_s3>;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&sdiom0_pins>;
> -	status = "okay";
> -};
> -
>  &sfc {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&fspim2_pins>;
> @@ -566,12 +532,6 @@ flash@0 {
>  	};
>  };
>  
> -&uart6 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
> -	status = "okay";
> -};
> -
>  &spi2 {
>  	status = "okay";
>  	assigned-clocks = <&cru CLK_SPI2>;


Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ