| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250512-cros_ec_fan-v3-3-a9f2b255f0cd@chromium.org>
Date: Mon, 12 May 2025 15:11:57 +0800
From: Sung-Chi Li via B4 Relay <devnull+lschyi.chromium.org@...nel.org>
To: Benson Leung <bleung@...omium.org>, Guenter Roeck <groeck@...omium.org>,
Thomas Weißschuh <linux@...ssschuh.net>,
Jean Delvare <jdelvare@...e.com>, Guenter Roeck <linux@...ck-us.net>,
Jonathan Corbet <corbet@....net>
Cc: chrome-platform@...ts.linux.dev, linux-kernel@...r.kernel.org,
linux-hwmon@...r.kernel.org, linux-doc@...r.kernel.org,
Sung-Chi Li <lschyi@...gle.com>, Sung-Chi Li <lschyi@...omium.org>
Subject: [PATCH v3 3/3] hwmon: (cros_ec) register fans into thermal
framework cooling devices
From: Sung-Chi Li <lschyi@...omium.org>
Register fans connected under EC as thermal cooling devices as well, so
these fans can then work with the thermal framework.
During the driver probing phase, we will also try to register each fan
as a thermal cooling device based on previous probe result (whether the
there are fans connected on that channel, and whether EC supports fan
control). The basic get max state, get current state, and set current
state methods are then implemented as well.
Signed-off-by: Sung-Chi Li <lschyi@...omium.org>
---
Documentation/hwmon/cros_ec_hwmon.rst | 2 +
drivers/hwmon/cros_ec_hwmon.c | 78 +++++++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/Documentation/hwmon/cros_ec_hwmon.rst b/Documentation/hwmon/cros_ec_hwmon.rst
index 355557a08c9a54b4c177bafde3743e7dc02218be..6db812708325f7abb6d319af3312b4079e6923c6 100644
--- a/Documentation/hwmon/cros_ec_hwmon.rst
+++ b/Documentation/hwmon/cros_ec_hwmon.rst
@@ -27,3 +27,5 @@ Fan and temperature readings are supported. PWM fan control is also supported if
the EC also supports setting fan PWM values and fan mode. Note that EC will
switch fan control mode back to auto when suspended. This driver will restore
the fan state to what they were before suspended when resumed.
+If a fan is controllable, this driver will register that fan as a cooling device
+in the thermal framework as well.
diff --git a/drivers/hwmon/cros_ec_hwmon.c b/drivers/hwmon/cros_ec_hwmon.c
index 884be1d34000c1a7485a381373c78329108dd427..557d268d5ef52e1c6f61f2eba71b449231849f2a 100644
--- a/drivers/hwmon/cros_ec_hwmon.c
+++ b/drivers/hwmon/cros_ec_hwmon.c
@@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include <linux/platform_data/cros_ec_commands.h>
#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/thermal.h>
#include <linux/types.h>
#include <linux/units.h>
@@ -31,6 +32,11 @@ struct cros_ec_hwmon_priv {
u8 manual_fan_pwm_values[EC_FAN_SPEED_ENTRIES];
};
+struct cros_ec_hwmon_cooling_priv {
+ struct cros_ec_hwmon_priv *hwmon_priv;
+ u8 index;
+};
+
static int cros_ec_hwmon_read_fan_speed(struct cros_ec_device *cros_ec, u8 index, u16 *speed)
{
int ret;
@@ -307,6 +313,42 @@ static const struct hwmon_channel_info * const cros_ec_hwmon_info[] = {
NULL
};
+static int cros_ec_hwmon_cooling_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *val)
+{
+ *val = 255;
+ return 0;
+}
+
+static int cros_ec_hwmon_cooling_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *val)
+{
+ const struct cros_ec_hwmon_cooling_priv *priv = cdev->devdata;
+ u8 read_val;
+ int ret;
+
+ ret = cros_ec_hwmon_read_pwm_value(priv->hwmon_priv->cros_ec, priv->index, &read_val);
+ if (ret)
+ return ret;
+
+ *val = read_val;
+ return ret;
+}
+
+static int cros_ec_hwmon_cooling_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long val)
+{
+ const struct cros_ec_hwmon_cooling_priv *priv = cdev->devdata;
+
+ return cros_ec_hwmon_write_pwm_input(priv->hwmon_priv->cros_ec, priv->index, val);
+}
+
+static const struct thermal_cooling_device_ops cros_ec_thermal_cooling_ops = {
+ .get_max_state = cros_ec_hwmon_cooling_get_max_state,
+ .get_cur_state = cros_ec_hwmon_cooling_get_cur_state,
+ .set_cur_state = cros_ec_hwmon_cooling_set_cur_state,
+};
+
static const struct hwmon_ops cros_ec_hwmon_ops = {
.read = cros_ec_hwmon_read,
.read_string = cros_ec_hwmon_read_string,
@@ -385,6 +427,41 @@ static bool cros_ec_hwmon_probe_fan_control_supported(struct cros_ec_device *cro
is_cros_ec_cmd_fulfilled(cros_ec, EC_CMD_THERMAL_AUTO_FAN_CTRL, CROS_EC_HWMON_THERMAL_AUTO_FAN_CTRL_CMD_VERSION);
}
+static void cros_ec_hwmon_register_fan_cooling_devices(struct device *dev,
+ struct cros_ec_hwmon_priv *priv)
+{
+ struct thermal_cooling_device *cdev;
+ struct cros_ec_hwmon_cooling_priv *cpriv;
+ size_t i;
+ char *type;
+
+ if (!IS_ENABLED(CONFIG_THERMAL))
+ return;
+
+ if (!priv->fan_control_supported)
+ return;
+
+ for (i = 0; i < EC_FAN_SPEED_ENTRIES; i++) {
+ if (!(priv->usable_fans & BIT(i)))
+ continue;
+
+ cpriv = devm_kzalloc(dev, sizeof(*cpriv), GFP_KERNEL);
+ if (!cpriv)
+ return;
+
+ type = devm_kasprintf(dev, GFP_KERNEL, "%s-fan%zu", dev_name(dev), i);
+ if (!type)
+ return;
+
+ cpriv->hwmon_priv = priv;
+ cpriv->index = i;
+ cdev = devm_thermal_of_cooling_device_register(dev, NULL, type, cpriv,
+ &cros_ec_thermal_cooling_ops);
+ if (!cdev)
+ return;
+ }
+}
+
static int cros_ec_hwmon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -412,6 +489,7 @@ static int cros_ec_hwmon_probe(struct platform_device *pdev)
cros_ec_hwmon_probe_temp_sensors(dev, priv, thermal_version);
cros_ec_hwmon_probe_fans(priv);
priv->fan_control_supported = cros_ec_hwmon_probe_fan_control_supported(priv->cros_ec);
+ cros_ec_hwmon_register_fan_cooling_devices(dev, priv);
hwmon_dev = devm_hwmon_device_register_with_info(dev, "cros_ec", priv,
&cros_ec_hwmon_chip_info, NULL);
--
2.49.0.1015.ga840276032-goog
Powered by blists - more mailing lists