Message-ID: <20250513080920.7c8a2a06@wsk>
Date: Tue, 13 May 2025 08:09:20 +0200
From: Lukasz Majewski <lukma@...x.de>
To: Rob Herring <robh@...nel.org>
Cc: Andrew Lunn <andrew+netdev@...n.ch>, davem@...emloft.net, Eric Dumazet
 <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
 <pabeni@...hat.com>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer
 <s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>, Richard Cochran
 <richardcochran@...il.com>, netdev@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org, Stefan Wahren
 <wahrenst@....net>, Simon Horman <horms@...nel.org>
Subject: Re: [net-next v11 1/7] dt-bindings: net: Add MTIP L2 switch
 description

Hi Rob,

> On Sun, May 04, 2025 at 04:55:32PM +0200, Lukasz Majewski wrote:
> > This patch provides description of the MTIP L2 switch available in
> > some NXP's SOCs - e.g. imx287.
> > 
> > Signed-off-by: Lukasz Majewski <lukma@...x.de>
> > Reviewed-by: Stefan Wahren <wahrenst@....net>
> > 
> > ---
> > Changes for v2:
> > - Rename the file to match exactly the compatible
> >   (nxp,imx287-mtip-switch)
> > 
> > Changes for v3:
> > - Remove '-' from const:'nxp,imx287-mtip-switch'
> > - Use '^port@[12]+$' for port patternProperties
> > - Drop status = "okay";
> > - Provide proper indentation for 'example' binding (replace 8
> >   spaces with 4 spaces)
> > - Remove smsc,disable-energy-detect; property
> > - Remove interrupt-parent and interrupts properties as not required
> > - Remove #address-cells and #size-cells from required properties
> > check
> > - remove description from reg:
> > - Add $ref: ethernet-switch.yaml#
> > 
> > Changes for v4:
> > - Use $ref: ethernet-switch.yaml#/$defs/ethernet-ports and remove
> > already referenced properties
> > - Rename file to nxp,imx28-mtip-switch.yaml
> > 
> > Changes for v5:
> > - Provide proper description for 'ethernet-port' node
> > 
> > Changes for v6:
> > - Proper usage of
> >   $ref: ethernet-switch.yaml#/$defs/ethernet-ports/patternProperties
> >   when specifying the 'ethernet-ports' property
> > - Add description and check for interrupt-names property
> > 
> > Changes for v7:
> > - Change switch interrupt name from 'mtipl2sw' to 'enet_switch'
> > 
> > Changes for v8:
> > - None
> > 
> > Changes for v9:
> > - Add GPIO_ACTIVE_LOW to reset-gpios mdio phandle
> > 
> > Changes for v10:
> > - None
> > 
> > Changes for v11:
> > - None
> > ---
> >  .../bindings/net/nxp,imx28-mtip-switch.yaml   | 149
> > ++++++++++++++++++ 1 file changed, 149 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/net/nxp,imx28-mtip-switch.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/net/nxp,imx28-mtip-switch.yaml
> > b/Documentation/devicetree/bindings/net/nxp,imx28-mtip-switch.yaml
> > new file mode 100644 index 000000000000..35f1fe268de7 --- /dev/null
> > +++
> > b/Documentation/devicetree/bindings/net/nxp,imx28-mtip-switch.yaml
> > @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR
> > BSD-2-Clause) +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/nxp,imx28-mtip-switch.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP SoC Ethernet Switch Controller (L2 MoreThanIP switch)
> > +
> > +maintainers:
> > +  - Lukasz Majewski <lukma@...x.de>
> > +
> > +description:
> > +  The 2-port switch ethernet subsystem provides ethernet packet
> > (L2)
> > +  communication and can be configured as an ethernet switch. It
> > provides the
> > +  reduced media independent interface (RMII), the management data
> > input
> > +  output (MDIO) for physical layer device (PHY) management.
> > +
> > +properties:
> > +  compatible:
> > +    const: nxp,imx28-mtip-switch
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  phy-supply:
> > +    description:
> > +      Regulator that powers Ethernet PHYs.
> > +
> > +  clocks:
> > +    items:
> > +      - description: Register accessing clock
> > +      - description: Bus access clock
> > +      - description: Output clock for external device - e.g. PHY
> > source clock
> > +      - description: IEEE1588 timer clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: ipg
> > +      - const: ahb
> > +      - const: enet_out
> > +      - const: ptp
> > +
> > +  interrupts:
> > +    items:
> > +      - description: Switch interrupt
> > +      - description: ENET0 interrupt
> > +      - description: ENET1 interrupt
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: enet_switch
> > +      - const: enet0
> > +      - const: enet1
> > +
> > +  pinctrl-names: true
> > +
> > +  ethernet-ports:
> > +    type: object
> > +    $ref:
> > ethernet-switch.yaml#/$defs/ethernet-ports/patternProperties  
> 
> 'patternProperties' is wrong. Drop.
> 

When I do drop it, then
make dt_binding_check DT_SCHEMA_FILES=nxp,imx28-mtip-switch.yaml

shows:

nxp,imx28-mtip-switch.example.dtb: switch@...f0000: ethernet-ports:
'oneOf' conditional failed, one must be fixed:

'ports' is a required property 
'ethernet-ports' is a required property
        from schema $id:
        http://devicetree.org/schemas/net/nxp,imx28-mtip-switch.yaml#

We do have ethernet-ports:
and we do "include" ($ref)
https://elixir.bootlin.com/linux/v6.14.6/source/Documentation/devicetree/bindings/net/ethernet-switch.yaml#L77

which is what we exactly need.

> > +    additionalProperties: true  
> 
> Drop.
> 

When removed we do have:
nxp,imx28-mtip-switch.example.dtb: switch@...f0000: Unevaluated
properties are not allowed ('ethernet-ports' was unexpected)

or 

nxp,imx28-mtip-switch.yaml: ethernet-ports: Missing
additionalProperties/unevaluatedProperties constraint

Depending if I do remove 'patternProperties' above.

To sum up - with the current code, the DT schema checks pass. It also
looks like the $ref for ethernet-switch is used in an optimal way.

I would opt for keeping the code as is for v12.

> > +
> > +    patternProperties:
> > +      '^ethernet-port@[12]$':
> > +        type: object
> > +        additionalProperties: true
> > +        properties:
> > +          reg:
> > +            items:
> > +              - enum: [1, 2]
> > +            description: MTIP L2 switch port number
> > +
> > +        required:
> > +          - reg
> > +          - label  
> 
> 'label' shouldn't ever be required because s/w shouldn't care what
> the value is.

Ok, I will remove it for v12.

> 
> > +          - phy-mode
> > +          - phy-handle
> > +
> > +  mdio:
> > +    type: object
> > +    $ref: mdio.yaml#
> > +    unevaluatedProperties: false
> > +    description:
> > +      Specifies the mdio bus in the switch, used as a container
> > for phy nodes. +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - interrupts
> > +  - interrupt-names
> > +  - mdio
> > +  - ethernet-ports
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include<dt-bindings/interrupt-controller/irq.h>
> > +    #include<dt-bindings/gpio/gpio.h>
> > +    switch@...f0000 {
> > +        compatible = "nxp,imx28-mtip-switch";
> > +        reg = <0x800f0000 0x20000>;
> > +        pinctrl-names = "default";
> > +        pinctrl-0 = <&mac0_pins_a>, <&mac1_pins_a>;
> > +        phy-supply = <&reg_fec_3v3>;
> > +        interrupts = <100>, <101>, <102>;
> > +        interrupt-names = "enet_switch", "enet0", "enet1";
> > +        clocks = <&clks 57>, <&clks 57>, <&clks 64>, <&clks 35>;
> > +        clock-names = "ipg", "ahb", "enet_out", "ptp";
> > +
> > +        ethernet-ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            mtip_port1: ethernet-port@1 {
> > +                reg = <1>;
> > +                label = "lan0";
> > +                local-mac-address = [ 00 00 00 00 00 00 ];
> > +                phy-mode = "rmii";
> > +                phy-handle = <&ethphy0>;
> > +            };
> > +
> > +            mtip_port2: ethernet-port@2 {
> > +                reg = <2>;
> > +                label = "lan1";
> > +                local-mac-address = [ 00 00 00 00 00 00 ];
> > +                phy-mode = "rmii";
> > +                phy-handle = <&ethphy1>;
> > +            };
> > +        };
> > +
> > +        mdio_sw: mdio {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
> > +            reset-delay-us = <25000>;
> > +            reset-post-delay-us = <10000>;
> > +
> > +            ethphy0: ethernet-phy@0 {
> > +                reg = <0>;
> > +            };
> > +
> > +            ethphy1: ethernet-phy@1 {
> > +                reg = <1>;
> > +            };
> > +        };
> > +    };
> > -- 
> > 2.39.5
> >   




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@...x.de

Content of type "application/pgp-signature" skipped

Powered by blists - more mailing lists