linux-kernel - Re: [PATCH v2 6/9] ASoC: codec: cs42l73: Convert to GPIO descriptors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CACRpkdZUxp3N+s=WdQGm8zpFP19LKUveN_5P+tfWi3OLeZWRxg@mail.gmail.com>
Date: Tue, 13 May 2025 11:14:20 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: "Peng Fan (OSS)" <peng.fan@....nxp.com>
Cc: David Rhodes <david.rhodes@...rus.com>, Richard Fitzgerald <rf@...nsource.cirrus.com>, 
	Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, 
	Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>, Bartosz Golaszewski <brgl@...ev.pl>, 
	Charles Keepax <ckeepax@...nsource.cirrus.com>, linux-sound@...r.kernel.org, 
	patches@...nsource.cirrus.com, linux-kernel@...r.kernel.org, 
	linux-gpio@...r.kernel.org, Peng Fan <peng.fan@....com>
Subject: Re: [PATCH v2 6/9] ASoC: codec: cs42l73: Convert to GPIO descriptors

On Mon, Apr 28, 2025 at 4:10 AM Peng Fan (OSS) <peng.fan@....nxp.com> wrote:

> From: Peng Fan <peng.fan@....com>
>
> of_gpio.h is deprecated, update the driver to use GPIO descriptors.
>  - Use devm_gpiod_get_optional to get GPIO descriptor with default
>    polarity GPIOD_OUT_LOW, set consumer name.
>  - Use gpiod_set_value_cansleep to configure output value.
>
> Checking the current driver using legacy GPIO API, the
> reset value is first output HIGH, then LOW, then HIGH.
>
> Checking the datasheet, Hold RESET LOW (active) until all the power
> supply rails have risen to greater than or equal to the minimum
> recommended operating voltages.
>
> Since the driver has been here for quite long time and no complain on
> the reset flow, still follow original flow when using GPIOD
> descriptors.
>
> Per datasheet, the DTS polarity should be GPIOD_ACTIVE_LOW. The binding
> example use value 0(GPIOD_ACTIVE_HIGH) which seems wrong. There is
> no in-tree DTS has the device, so all should be fine.
>
> Signed-off-by: Peng Fan <peng.fan@....com>

Reviewed-by: Linus Walleij <linus.walleij@...aro.org>

Yours,
Linus Walleij