| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aCRZfOQS0JTWKUdX@vaman>
Date: Wed, 14 May 2025 09:51:08 +0100
From: Vinod Koul <vkoul@...nel.org>
To: Ze Huang <huangze@...t.edu.cn>
Cc: Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Yixun Lan <dlan@...too.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org, spacemit@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/4] phy: spacemit: support K1 USB2.0 PHY controller
Hi,
On 18-04-25, 21:19, Ze Huang wrote:
> Add support for SpacemiT K1 USB2.0 PHY.
Can you please add more details of this device, which SoC is this, and
what are the capablities of this phy
>
> Signed-off-by: Ze Huang <huangze@...t.edu.cn>
> ---
> drivers/phy/Kconfig | 1 +
> drivers/phy/Makefile | 1 +
> drivers/phy/spacemit/Kconfig | 13 ++++
> drivers/phy/spacemit/Makefile | 2 +
> drivers/phy/spacemit/phy-k1-usb2.c | 131 +++++++++++++++++++++++++++++++++++++
> 5 files changed, 148 insertions(+)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 8d58efe998ec5fd50054eed2c90d6ecce6bd5dd8..fca589aa7926eb5bce14e99785cf32cf0395202e 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -114,6 +114,7 @@ source "drivers/phy/renesas/Kconfig"
> source "drivers/phy/rockchip/Kconfig"
> source "drivers/phy/samsung/Kconfig"
> source "drivers/phy/socionext/Kconfig"
> +source "drivers/phy/spacemit/Kconfig"
> source "drivers/phy/st/Kconfig"
> source "drivers/phy/starfive/Kconfig"
> source "drivers/phy/sunplus/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index e281442acc752820fe0bd638dfe38986a37c2a78..05993ff8a15daf7e2583b5f9b9b37ac584a30609 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -34,6 +34,7 @@ obj-y += allwinner/ \
> rockchip/ \
> samsung/ \
> socionext/ \
> + spacemit/ \
> st/ \
> starfive/ \
> sunplus/ \
> diff --git a/drivers/phy/spacemit/Kconfig b/drivers/phy/spacemit/Kconfig
> new file mode 100644
> index 0000000000000000000000000000000000000000..0136aee2e8a2f5f484da136b26f80130794b992c
> --- /dev/null
> +++ b/drivers/phy/spacemit/Kconfig
> @@ -0,0 +1,13 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Phy drivers for SpacemiT platforms
> +#
> +config PHY_SPACEMIT_K1_USB2
> + tristate "SpacemiT K1 USB 2.0 PHY support"
> + depends on (ARCH_SPACEMIT || COMPILE_TEST) && OF
> + depends on COMMON_CLK
> + depends on USB_COMMON
> + select GENERIC_PHY
> + help
> + Enable this to support K1 USB 2.0 PHY driver. This driver takes care of
> + enabling and clock setup and will be used by K1 udc/ehci/otg/xhci driver.
> diff --git a/drivers/phy/spacemit/Makefile b/drivers/phy/spacemit/Makefile
> new file mode 100644
> index 0000000000000000000000000000000000000000..fec0b425a948541b39b814caef0b05e1e002d92f
> --- /dev/null
> +++ b/drivers/phy/spacemit/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +obj-$(CONFIG_PHY_SPACEMIT_K1_USB2) += phy-k1-usb2.o
> diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..4a5684f3185f61f9d865b0fb52644bb280756d00
> --- /dev/null
> +++ b/drivers/phy/spacemit/phy-k1-usb2.c
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * SpacemiT K1 USB 2.0 PHY driver
> + *
> + * Copyright (C) 2025 SpacemiT (Hangzhou) Technology Co. Ltd
> + * Copyright (C) 2025 Ze Huang <huangze@...t.edu.cn>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/of.h>
> +
> +#define USB2_PHY_REG01 0x04
> +#define USB2_PHY_REG01_VAL 0x60ef
> +#define USB2_PHY_REG01_PLL_IS_READY BIT(0)
> +#define USB2_PHY_REG04 0x10
> +#define USB2_PHY_REG04_AUTO_CLEAR_DIS BIT(2)
> +#define USB2_PHY_REG0D 0x34
> +#define USB2_PHY_REG0D_VAL 0x1c
> +#define USB2_PHY_REG26 0x98
> +#define USB2_PHY_REG26_VAL 0xbec4
What are these values referred to, why are you defining fixed values for
driver to use and not set the register bits?
> +
> +#define USB2D_CTRL_RESET_TIME_MS 50
> +
> +struct spacemit_usb2phy {
> + struct phy *phy;
> + struct clk *clk;
> + void __iomem *base;
> +};
> +
> +static int spacemit_usb2phy_init(struct phy *phy)
> +{
> + struct spacemit_usb2phy *sphy = phy_get_drvdata(phy);
> + void __iomem *base = sphy->base;
> + u32 val;
> + int ret;
> +
> + ret = clk_prepare_enable(sphy->clk);
> + if (ret) {
> + dev_err(&phy->dev, "failed to enable clock\n");
> + return ret;
> + }
> +
> + /*
> + * make sure the usb controller is not under reset process before
> + * any configuration
> + */
> + usleep_range(150, 200);
> + writel(USB2_PHY_REG26_VAL, base + USB2_PHY_REG26); /* 24M ref clk */
> +
> + ret = read_poll_timeout(readl, val, (val & USB2_PHY_REG01_PLL_IS_READY),
> + 500, USB2D_CTRL_RESET_TIME_MS * 1000, true,
> + base + USB2_PHY_REG01);
> + if (ret) {
> + dev_err(&phy->dev, "wait PHY_REG01[PLLREADY] timeout\n");
> + return ret;
> + }
> +
> + /* release usb2 phy internal reset and enable clock gating */
> + writel(USB2_PHY_REG01_VAL, base + USB2_PHY_REG01);
> + writel(USB2_PHY_REG0D_VAL, base + USB2_PHY_REG0D);
> +
> + /* auto clear host disc */
> + val = readl(base + USB2_PHY_REG04);
> + val |= USB2_PHY_REG04_AUTO_CLEAR_DIS;
> + writel(val, base + USB2_PHY_REG04);
> +
> + return 0;
> +}
> +
> +static int spacemit_usb2phy_exit(struct phy *phy)
> +{
> + struct spacemit_usb2phy *sphy = phy_get_drvdata(phy);
> +
> + clk_disable_unprepare(sphy->clk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops spacemit_usb2phy_ops = {
> + .init = spacemit_usb2phy_init,
> + .exit = spacemit_usb2phy_exit,
> + .owner = THIS_MODULE,
> +};
> +
> +static int spacemit_usb2phy_probe(struct platform_device *pdev)
> +{
> + struct phy_provider *phy_provider;
> + struct device *dev = &pdev->dev;
> + struct spacemit_usb2phy *sphy;
> +
> + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
> + if (!sphy)
> + return -ENOMEM;
> +
> + sphy->clk = devm_clk_get_prepared(&pdev->dev, NULL);
> + if (IS_ERR(sphy->clk))
> + return dev_err_probe(dev, PTR_ERR(sphy->clk), "Failed to get clock\n");
> +
> + sphy->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(sphy->base))
> + return PTR_ERR(sphy->base);
> +
> + sphy->phy = devm_phy_create(dev, NULL, &spacemit_usb2phy_ops);
> + if (IS_ERR(sphy->phy))
> + return dev_err_probe(dev, PTR_ERR(sphy->phy), "Failed to create phy\n");
> +
> + phy_set_drvdata(sphy->phy, sphy);
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id spacemit_usb2phy_dt_match[] = {
> + { .compatible = "spacemit,k1-usb2-phy", },
> + { /* sentinal */ }
> +};
> +MODULE_DEVICE_TABLE(of, spacemit_usb2phy_dt_match);
> +
> +static struct platform_driver spacemit_usb2_phy_driver = {
> + .probe = spacemit_usb2phy_probe,
> + .driver = {
> + .name = "spacemit-usb2-phy",
> + .of_match_table = spacemit_usb2phy_dt_match,
> + },
> +};
> +module_platform_driver(spacemit_usb2_phy_driver);
> +
> +MODULE_DESCRIPTION("Spacemit USB 2.0 PHY driver");
> +MODULE_LICENSE("GPL");
>
> --
> 2.49.0
>
>
> --
> linux-phy mailing list
> linux-phy@...ts.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy
--
~Vinod
Powered by blists - more mailing lists