[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <aCW4DCR/IMxejUpg@FUE-ALEWI-WINX>
Date: Thu, 15 May 2025 11:46:52 +0200
From: Alexander Wilhelm <alexander.wilhelm@...termo.com>
To: Loic Poulain <loic.poulain@....qualcomm.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
mhi@...ts.linux.dev, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] bus: mhi: host: fix endianness of BHI vector table
Am Thu, May 15, 2025 at 11:38:43AM +0200 schrieb Loic Poulain:
> On Thu, May 15, 2025 at 11:26 AM Alexander Wilhelm
> <alexander.wilhelm@...termo.com> wrote:
> >
> > On big endian platforms like PowerPC the DMA address and size are required
> > to be swapped. Otherwise the MHI bus does not start properly. The following
> > example shows the error messages by using qcn9274 wireless radio module
> > with ath12k driver:
> >
> > ath12k_pci 0001:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
> > ath12k_pci 0001:01:00.0: MSI vectors: 1
> > ath12k_pci 0001:01:00.0: Hardware name: qcn9274 hw2.0
> > ath12k_pci 0001:01:00.0: failed to set mhi state: POWER_ON(2)
> > ath12k_pci 0001:01:00.0: failed to start mhi: -110
> > ath12k_pci 0001:01:00.0: failed to power up :-110
> > ath12k_pci 0001:01:00.0: failed to create soc core: -110
> > ath12k_pci 0001:01:00.0: failed to init core: -110
> > ath12k_pci: probe of 0001:01:00.0 failed with error -110
> >
> > Signed-off-by: Alexander Wilhelm <alexander.wilhelm@...termo.com>
> > ---
> > drivers/bus/mhi/host/boot.c | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/bus/mhi/host/boot.c b/drivers/bus/mhi/host/boot.c
> > index efa3b6dddf4d..205d83ac069f 100644
> > --- a/drivers/bus/mhi/host/boot.c
> > +++ b/drivers/bus/mhi/host/boot.c
> > @@ -31,8 +31,8 @@ int mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
> > int ret;
> >
> > for (i = 0; i < img_info->entries - 1; i++, mhi_buf++, bhi_vec++) {
> > - bhi_vec->dma_addr = mhi_buf->dma_addr;
> > - bhi_vec->size = mhi_buf->len;
> > + bhi_vec->dma_addr = cpu_to_le64(mhi_buf->dma_addr);
> > + bhi_vec->size = cpu_to_le64(mhi_buf->len);
>
> Ok, but then I think the bhi_vec_entry struct should be fixed as well,
> using __le64 fields.
>
> Regards,
> Loic
Sure, I'll fix that. Thank you.
Best regards
Alexander Wilhelm
Powered by blists - more mailing lists