linux-kernel - [PATCH v4 4/5] arm64: dts: ipq5018: Add CMN PLL node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250516-ipq5018-cmn-pll-v4-4-389a6b30e504@outlook.com>
Date: Fri, 16 May 2025 16:36:11 +0400
From: George Moussalem via B4 Relay <devnull+george.moussalem.outlook.com@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>, 
 Michael Turquette <mturquette@...libre.com>, 
 Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Luo Jie <quic_luoj@...cinc.com>, 
 Lee Jones <lee@...nel.org>, Konrad Dybcio <konradybcio@...nel.org>, 
 Arnd Bergmann <arnd@...db.de>
Cc: linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 George Moussalem <george.moussalem@...look.com>
Subject: [PATCH v4 4/5] arm64: dts: ipq5018: Add CMN PLL node

From: George Moussalem <george.moussalem@...look.com>

Add CMN PLL node for enabling output clocks to the networking
hardware blocks on IPQ5018 devices.

The reference clock of CMN PLL is routed from XO to the CMN PLL
through the internal WiFi block.
.XO (48 MHZ) --> WiFi (multiplier/divider)--> 96 MHZ to CMN PLL.

Signed-off-by: George Moussalem <george.moussalem@...look.com>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 130360014c5e14c778e348d37e601f60325b0b14..632caa94df51197ddaa85d172412553e87cf89f3 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -2,12 +2,13 @@
 /*
  * IPQ5018 SoC device tree source
  *
- * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023-2025 The Linux Foundation. All rights reserved.
  */
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+#include <dt-bindings/clock/qcom,ipq5018-cmn-pll.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
 
 / {
@@ -16,6 +17,14 @@ / {
 	#size-cells = <2>;
 
 	clocks {
+		ref_96mhz_clk: ref-96mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -25,6 +34,12 @@ xo_board_clk: xo-board-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
+
+		xo_clk: xo-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
 	};
 
 	cpus {
@@ -182,6 +197,20 @@ pcie0_phy: phy@...00 {
 			status = "disabled";
 		};
 
+		cmn_pll: clock-controller@...00 {
+			compatible = "qcom,ipq5018-cmn-pll";
+			reg = <0x0009b000 0x800>;
+			clocks = <&ref_96mhz_clk>,
+				 <&gcc GCC_CMN_BLK_AHB_CLK>,
+				 <&gcc GCC_CMN_BLK_SYS_CLK>;
+			clock-names = "ref",
+				      "ahb",
+				      "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll IPQ5018_CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <9600000000>;
+		};
+
 		tlmm: pinctrl@...0000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;

-- 
2.49.0