[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250519061014.12225-1-alexander.wilhelm@westermo.com>
Date: Mon, 19 May 2025 08:10:13 +0200
From: Alexander Wilhelm <alexander.wilhelm@...termo.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Cc: Jeff Hugo <jeff.hugo@....qualcomm.com>, mhi@...ts.linux.dev,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3] bus: mhi: host: fix endianness of BHI vector table
On big endian platform like PowerPC the MHI bus does not start properly. The
following example shows the error messages by using qcn9274 wireless radio
module with ath12k driver:
ath12k_pci 0001:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
ath12k_pci 0001:01:00.0: MSI vectors: 1
ath12k_pci 0001:01:00.0: Hardware name: qcn9274 hw2.0
ath12k_pci 0001:01:00.0: failed to set mhi state: POWER_ON(2)
ath12k_pci 0001:01:00.0: failed to start mhi: -110
ath12k_pci 0001:01:00.0: failed to power up :-110
ath12k_pci 0001:01:00.0: failed to create soc core: -110
ath12k_pci 0001:01:00.0: failed to init core: -110
ath12k_pci: probe of 0001:01:00.0 failed with error -110
Fix it by swapping DMA address and size of the BHI vector table.
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@...termo.com>
Reviewed-by: Jeff Hugo <jeff.hugo@....qualcomm.com>
---
Changes in v2:
- Set __le64 type for dma_addr and size.
Changes in v3:
- Improve the clarity of the commit message.
drivers/bus/mhi/host/boot.c | 8 ++++----
drivers/bus/mhi/host/internal.h | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/bus/mhi/host/boot.c b/drivers/bus/mhi/host/boot.c
index efa3b6dddf4d..205d83ac069f 100644
--- a/drivers/bus/mhi/host/boot.c
+++ b/drivers/bus/mhi/host/boot.c
@@ -31,8 +31,8 @@ int mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
int ret;
for (i = 0; i < img_info->entries - 1; i++, mhi_buf++, bhi_vec++) {
- bhi_vec->dma_addr = mhi_buf->dma_addr;
- bhi_vec->size = mhi_buf->len;
+ bhi_vec->dma_addr = cpu_to_le64(mhi_buf->dma_addr);
+ bhi_vec->size = cpu_to_le64(mhi_buf->len);
}
dev_dbg(dev, "BHIe programming for RDDM\n");
@@ -431,8 +431,8 @@ static void mhi_firmware_copy_bhie(struct mhi_controller *mhi_cntrl,
while (remainder) {
to_cpy = min(remainder, mhi_buf->len);
memcpy(mhi_buf->buf, buf, to_cpy);
- bhi_vec->dma_addr = mhi_buf->dma_addr;
- bhi_vec->size = to_cpy;
+ bhi_vec->dma_addr = cpu_to_le64(mhi_buf->dma_addr);
+ bhi_vec->size = cpu_to_le64(to_cpy);
buf += to_cpy;
remainder -= to_cpy;
diff --git a/drivers/bus/mhi/host/internal.h b/drivers/bus/mhi/host/internal.h
index ce566f7d2e92..1dbc3f736161 100644
--- a/drivers/bus/mhi/host/internal.h
+++ b/drivers/bus/mhi/host/internal.h
@@ -25,8 +25,8 @@ struct mhi_ctxt {
};
struct bhi_vec_entry {
- u64 dma_addr;
- u64 size;
+ __le64 dma_addr;
+ __le64 size;
};
enum mhi_fw_load_type {
--
2.34.1
Powered by blists - more mailing lists