linux-kernel - [net 4/4] net: ftgmac100: Add optional reset control for RMII mode on Aspeed SoCs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250520092848.531070-5-jacky_chou@aspeedtech.com>
Date: Tue, 20 May 2025 17:28:48 +0800
From: Jacky Chou <jacky_chou@...eedtech.com>
To: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <linux-aspeed@...ts.ozlabs.org>,
	<andrew+netdev@...n.ch>, <davem@...emloft.net>, <edumazet@...gle.com>,
	<kuba@...nel.org>, <pabeni@...hat.com>, <robh@...nel.org>,
	<krzk+dt@...nel.org>, <conor+dt@...nel.org>, <joel@....id.au>,
	<andrew@...econstruct.com.au>, <mturquette@...libre.com>, <sboyd@...nel.org>,
	<p.zabel@...gutronix.de>, <BMC-SW@...eedtech.com>
Subject: [net 4/4] net: ftgmac100: Add optional reset control for RMII mode on Aspeed SoCs

On Aspeed SoCs, the internal MAC reset is insufficient to fully reset the
RMII interface; only the SoC-level reset line can properly reset the RMII
logic. This patch adds support for an optional "resets" property in the
device tree, allowing the driver to assert and deassert the SoC reset line
when operating in RMII mode. This ensures the MAC and RMII interface are
correctly reset and initialized.

Signed-off-by: Jacky Chou <jacky_chou@...eedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 17ec35e75a65..01c4db6e5b91 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -9,6 +9,7 @@
 #define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
 
 #include <linux/clk.h>
+#include <linux/reset.h>
 #include <linux/dma-mapping.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
@@ -101,6 +102,8 @@ struct ftgmac100 {
 
 	/* AST2500/AST2600 RMII ref clock gate */
 	struct clk *rclk;
+	/* Aspeed reset control */
+	struct reset_control *rst;
 
 	/* Link management */
 	int cur_speed;
@@ -148,6 +151,23 @@ static int ftgmac100_reset_and_config_mac(struct ftgmac100 *priv)
 {
 	u32 maccr = 0;
 
+	/* Aspeed RMII needs SCU reset to clear status */
+	if (priv->is_aspeed && priv->netdev->phydev->interface == PHY_INTERFACE_MODE_RMII) {
+		int err;
+
+		err = reset_control_assert(priv->rst);
+		if (err) {
+			dev_err(priv->dev, "Failed to reset mac (%d)\n", err);
+			return err;
+		}
+		usleep_range(10000, 20000);
+		err = reset_control_deassert(priv->rst);
+		if (err) {
+			dev_err(priv->dev, "Failed to deassert mac reset (%d)\n", err);
+			return err;
+		}
+	}
+
 	switch (priv->cur_speed) {
 	case SPEED_10:
 	case 0: /* no link */
@@ -1968,6 +1988,12 @@ static int ftgmac100_probe(struct platform_device *pdev)
 
 	}
 
+	priv->rst = devm_reset_control_get_optional_exclusive(priv->dev, NULL);
+	if (IS_ERR(priv->rst)) {
+		err = PTR_ERR(priv->rst);
+		goto err_phy_connect;
+	}
+
 	if (priv->is_aspeed) {
 		err = ftgmac100_setup_clk(priv);
 		if (err)
-- 
2.34.1