| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cfe3d2a5-fe32-ca35-98f5-812da367dc99@linux.intel.com>
Date: Tue, 20 May 2025 15:02:06 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Bjorn Helgaas <helgaas@...nel.org>
cc: linux-pci@...r.kernel.org, Jon Pan-Doh <pandoh@...gle.com>,
Karolina Stolarek <karolina.stolarek@...cle.com>,
Martin Petersen <martin.petersen@...cle.com>,
Ben Fuller <ben.fuller@...cle.com>, Drew Walton <drewwalton@...rosoft.com>,
Anil Agrawal <anilagrawal@...a.com>, Tony Luck <tony.luck@...el.com>,
Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@...ux.intel.com>,
Lukas Wunner <lukas@...ner.de>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Sargun Dhillon <sargun@...a.com>, "Paul E . McKenney" <paulmck@...nel.org>,
Mahesh J Salgaonkar <mahesh@...ux.ibm.com>,
Oliver O'Halloran <oohall@...il.com>, Kai-Heng Feng <kaihengf@...dia.com>,
Keith Busch <kbusch@...nel.org>, Robert Richter <rrichter@....com>,
Terry Bowman <terry.bowman@....com>, Shiju Jose <shiju.jose@...wei.com>,
Dave Jiang <dave.jiang@...el.com>, LKML <linux-kernel@...r.kernel.org>,
linuxppc-dev@...ts.ozlabs.org, Bjorn Helgaas <bhelgaas@...gle.com>
Subject: Re: [PATCH v6 16/16] PCI/AER: Add sysfs attributes for log
ratelimits
On Mon, 19 May 2025, Bjorn Helgaas wrote:
> From: Jon Pan-Doh <pandoh@...gle.com>
>
> Allow userspace to read/write log ratelimits per device (including
> enable/disable). Create aer/ sysfs directory to store them and any
> future aer configs.
>
> Update AER sysfs ABI filename to reflect the broader scope of AER sysfs
> attributes (e.g. stats and ratelimits).
>
> Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats ->
> sysfs-bus-pci-devices-aer
>
> Tested using aer-inject[1]. Configured correctable log ratelimit to 5.
> Sent 6 AER errors. Observed 5 errors logged while AER stats
> (cat /sys/bus/pci/devices/<dev>/aer_dev_correctable) shows 6.
>
> Disabled ratelimiting and sent 6 more AER errors. Observed all 6 errors
> logged and accounted in AER stats (12 total errors).
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git
>
> Signed-off-by: Karolina Stolarek <karolina.stolarek@...cle.com>
> Signed-off-by: Jon Pan-Doh <pandoh@...gle.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
> Acked-by: Paul E. McKenney <paulmck@...nel.org>
> ---
> ...es-aer_stats => sysfs-bus-pci-devices-aer} | 34 +++++++
> Documentation/PCI/pcieaer-howto.rst | 5 +-
> drivers/pci/pci-sysfs.c | 1 +
> drivers/pci/pci.h | 1 +
> drivers/pci/pcie/aer.c | 99 +++++++++++++++++++
> 5 files changed, 139 insertions(+), 1 deletion(-)
> rename Documentation/ABI/testing/{sysfs-bus-pci-devices-aer_stats => sysfs-bus-pci-devices-aer} (77%)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer
> similarity index 77%
> rename from Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
> rename to Documentation/ABI/testing/sysfs-bus-pci-devices-aer
> index d1f67bb81d5d..771204197b71 100644
> --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
> +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer
> @@ -117,3 +117,37 @@ Date: July 2018
> KernelVersion: 4.19.0
> Contact: linux-pci@...r.kernel.org, rajatja@...gle.com
> Description: Total number of ERR_NONFATAL messages reported to rootport.
> +
> +PCIe AER ratelimits
> +-------------------
> +
> +These attributes show up under all the devices that are AER capable.
> +They represent configurable ratelimits of logs per error type.
> +
> +See Documentation/PCI/pcieaer-howto.rst for more info on ratelimits.
> +
> +What: /sys/bus/pci/devices/<dev>/aer/ratelimit_log_enable
> +Date: March 2025
> +KernelVersion: 6.15.0
This ship has sailed.
> +Contact: linux-pci@...r.kernel.org, pandoh@...gle.com
> +Description: Writing 1/0 enables/disables AER log ratelimiting. Reading
> + gets whether or not AER is currently enabled.
AER or AER ratelimiting is enabled?
> + Enabled by
> + default.
> +
> +What: /sys/bus/pci/devices/<dev>/aer/ratelimit_burst_cor_log
> +Date: March 2025
> +KernelVersion: 6.15.0
> +Contact: linux-pci@...r.kernel.org, pandoh@...gle.com
> +Description: Ratelimit burst for correctable error logs. Writing a value
> + changes the number of errors (burst) allowed per interval
> + (5 second window) before ratelimiting. Reading gets the
> + current ratelimit burst.
> +
> +What: /sys/bus/pci/devices/<dev>/aer/ratelimit_burst_uncor_log
> +Date: March 2025
> +KernelVersion: 6.15.0
> +Contact: linux-pci@...r.kernel.org, pandoh@...gle.com
> +Description: Ratelimit burst for uncorrectable error logs. Writing a
> + value changes the number of errors (burst) allowed per
> + interval (5 second window) before ratelimiting. Reading
> + gets the current ratelimit burst.
> diff --git a/Documentation/PCI/pcieaer-howto.rst b/Documentation/PCI/pcieaer-howto.rst
> index 896d2a232a90..043cdb3194be 100644
> --- a/Documentation/PCI/pcieaer-howto.rst
> +++ b/Documentation/PCI/pcieaer-howto.rst
> @@ -96,12 +96,15 @@ type (correctable vs. uncorrectable).
> AER uses the default ratelimit of DEFAULT_RATELIMIT_BURST (10 events) over
> DEFAULT_RATELIMIT_INTERVAL (5 seconds).
>
> +Ratelimits are exposed in the form of sysfs attributes and configurable.
> +See Documentation/ABI/testing/sysfs-bus-pci-devices-aer.
> +
> AER Statistics / Counters
> -------------------------
>
> When PCIe AER errors are captured, the counters / statistics are also exposed
> in the form of sysfs attributes which are documented at
> -Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
> +Documentation/ABI/testing/sysfs-bus-pci-devices-aer.
>
> Developer Guide
> ===============
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index c6cda56ca52c..278de99b00ce 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -1805,6 +1805,7 @@ const struct attribute_group *pci_dev_attr_groups[] = {
> &pcie_dev_attr_group,
> #ifdef CONFIG_PCIEAER
> &aer_stats_attr_group,
> + &aer_attr_group,
> #endif
> #ifdef CONFIG_PCIEASPM
> &aspm_ctrl_attr_group,
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 65c466279ade..a3261e842d6d 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -963,6 +963,7 @@ void pci_no_aer(void);
> void pci_aer_init(struct pci_dev *dev);
> void pci_aer_exit(struct pci_dev *dev);
> extern const struct attribute_group aer_stats_attr_group;
> +extern const struct attribute_group aer_attr_group;
> void pci_aer_clear_fatal_status(struct pci_dev *dev);
> int pci_aer_clear_status(struct pci_dev *dev);
> int pci_aer_raw_clear_status(struct pci_dev *dev);
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index c335e0bb9f51..42df5cb963b3 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -627,6 +627,105 @@ const struct attribute_group aer_stats_attr_group = {
> .is_visible = aer_stats_attrs_are_visible,
> };
>
> +/*
> + * Ratelimit enable toggle
> + * 0: disabled with ratelimit.interval = 0
> + * 1: enabled with ratelimit.interval = nonzero
> + */
> +static ssize_t ratelimit_log_enable_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> + bool enabled = pdev->aer_report->cor_log_ratelimit.interval != 0;
> +
> + return sysfs_emit(buf, "%d\n", enabled);
> +}
> +
> +static ssize_t ratelimit_log_enable_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> + bool enable;
> + int interval;
> +
> + if (!capable(CAP_SYS_ADMIN))
> + return -EPERM;
> +
> + if (kstrtobool(buf, &enable) < 0)
> + return -EINVAL;
> +
> + if (enable)
> + interval = DEFAULT_RATELIMIT_INTERVAL;
> + else
> + interval = 0;
> +
> + pdev->aer_report->cor_log_ratelimit.interval = interval;
> + pdev->aer_report->uncor_log_ratelimit.interval = interval;
> +
> + return count;
> +}
> +static DEVICE_ATTR_RW(ratelimit_log_enable);
> +
> +#define aer_ratelimit_burst_attr(name, ratelimit) \
> + static ssize_t \
> + name##_show(struct device *dev, struct device_attribute *attr, \
> + char *buf) \
> +{ \
> + struct pci_dev *pdev = to_pci_dev(dev); \
> + \
> + return sysfs_emit(buf, "%d\n", \
> + pdev->aer_report->ratelimit.burst); \
> +} \
> + \
> + static ssize_t \
> + name##_store(struct device *dev, struct device_attribute *attr, \
> + const char *buf, size_t count) \
> +{ \
> + struct pci_dev *pdev = to_pci_dev(dev); \
> + int burst; \
> + \
> + if (!capable(CAP_SYS_ADMIN)) \
> + return -EPERM; \
> + \
> + if (kstrtoint(buf, 0, &burst) < 0) \
> + return -EINVAL; \
> + \
> + pdev->aer_report->ratelimit.burst = burst; \
> + \
> + return count; \
> +} \
> +static DEVICE_ATTR_RW(name)
> +
> +aer_ratelimit_burst_attr(ratelimit_burst_cor_log, cor_log_ratelimit);
> +aer_ratelimit_burst_attr(ratelimit_burst_uncor_log, uncor_log_ratelimit);
> +
> +static struct attribute *aer_attrs[] = {
> + &dev_attr_ratelimit_log_enable.attr,
> + &dev_attr_ratelimit_burst_cor_log.attr,
> + &dev_attr_ratelimit_burst_uncor_log.attr,
> + NULL
> +};
> +
> +static umode_t aer_attrs_are_visible(struct kobject *kobj,
> + struct attribute *a, int n)
> +{
> + struct device *dev = kobj_to_dev(kobj);
> + struct pci_dev *pdev = to_pci_dev(dev);
> +
> + if (!pdev->aer_report)
> + return 0;
> +
> + return a->mode;
> +}
> +
> +const struct attribute_group aer_attr_group = {
> + .name = "aer",
> + .attrs = aer_attrs,
> + .is_visible = aer_attrs_are_visible,
> +};
> +
> static void pci_dev_aer_stats_incr(struct pci_dev *pdev,
> struct aer_err_info *info)
> {
>
--
i.
Powered by blists - more mailing lists