| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250521-fast-almond-chihuahua-3e0a62@kuoka>
Date: Wed, 21 May 2025 12:05:35 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Vincent Knecht <vincent.knecht@...loo.org>
Cc: Robert Foss <rfoss@...nel.org>, Todor Tomov <todor.too@...il.com>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>, Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
André Apitzsch <git@...tzsch.eu>, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH 3/4] media: dt-bindings: Add qcom,msm8939-camss
On Tue, May 20, 2025 at 08:39:08PM GMT, Vincent Knecht wrote:
> Add bindings for qcom,msm8939-camss in order to support the camera
> subsystem for MSM8939.
>
> Signed-off-by: Vincent Knecht <vincent.knecht@...loo.org>
> ---
> .../bindings/media/qcom,msm8939-camss.yaml | 269 +++++++++++++++++++++
> 1 file changed, 269 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..e300b2c84971a45cca43366817a5ed70f9bae630
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
> @@ -0,0 +1,269 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,msm8939-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm MSM8939 Camera Subsystem (CAMSS)
> +
> +maintainers:
> + - Vincent Knecht <vincent.knecht@...loo.org>
> +
> +description:
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,msm8939-camss
> +
No reg? No reg-names?
> + clocks:
> + minItems: 24
> + maxItems: 24
> +
> + clock-names:
> + items:
> + - const: top_ahb
> + - const: ispif_ahb
> + - const: csiphy0_timer
> + - const: csiphy1_timer
> + - const: csi0_ahb
> + - const: csi0
> + - const: csi0_phy
> + - const: csi0_pix
> + - const: csi0_rdi
> + - const: csi1_ahb
> + - const: csi1
> + - const: csi1_phy
> + - const: csi1_pix
> + - const: csi1_rdi
> + - const: csi2_ahb
> + - const: csi2
> + - const: csi2_phy
> + - const: csi2_pix
> + - const: csi2_rdi
> + - const: ahb
> + - const: vfe0
> + - const: csi_vfe0
> + - const: vfe_ahb
> + - const: vfe_axi
> +
> + interrupts:
> + minItems: 7
> + maxItems: 7
> +
> + interrupt-names:
> + items:
> + - const: csiphy0
> + - const: csiphy1
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: ispif
> + - const: vfe0
> +
> + iommus:
> + maxItems: 1
> +
> + power-domains:
> + items:
> + - description: VFE GDSC - Video Front End, Global Distributed Switch Controller.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + bus-type:
> + enum:
> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> + required:
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + bus-type:
> + enum:
> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> + required:
> + - data-lanes
> +
> + reg:
> + minItems: 11
> + maxItems: 11
OK, here they are. reg should follow compatible.
> +
> + reg-names:
> + items:
> + - const: csiphy0
> + - const: csiphy0_clk_mux
> + - const: csiphy1
> + - const: csiphy1_clk_mux
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: ispif
> + - const: csi_clk_mux
> + - const: vfe0
> + - const: vfe0_vbif
> +
> + vdda-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> +
> +required:
> + - clock-names
> + - clocks
> + - compatible
Totally messed order. Keep the same order as in properties. See also DTS
coding style.
> + - interrupt-names
> + - interrupts
> + - iommus
> + - power-domains
> + - reg
> + - reg-names
> + - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-msm8939.h>
> +
> + camss: camss@...ac00 {
Drop unused label
> + compatible = "qcom,msm8939-camss";
> +
Follow DTS coding style.
...
> + vdda-supply = <®_2v8>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
Incomplete example.
> + };
> +
Drop redundant blank line.
Best regards,
Krzysztof
Powered by blists - more mailing lists