linux-kernel - [PATCH v2 1/2] dt-bindings: gnss: u-blox: add "safeboot-gpios" binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250522-ubx-safeboot-v2-1-08c22378b8c9@geotab.com>
Date: Thu, 22 May 2025 18:51:04 +0200
From: Alejandro Enrique via B4 Relay <devnull+alejandroe1.geotab.com@...nel.org>
To: Johan Hovold <johan@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Alejandro Enrique <alejandroe1@...tab.com>
Subject: [PATCH v2 1/2] dt-bindings: gnss: u-blox: add "safeboot-gpios"
 binding

From: Alejandro Enrique <alejandroe1@...tab.com>

U-Blox 8/M8/M9 chip have a pin to start it in safeboot mode, to be
used to recover from situations where the flash content has become
corrupted and needs to be restored. Introduce a binding to support
this safeboot pin.

Signed-off-by: Alejandro Enrique <alejandroe1@...tab.com>
---
 Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
index 7d4b6d49e5eea2201ac05ba6d54b1c1721172f26..7589327a77da5c70bfebe57685e2a4bbfd95934c 100644
--- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -6,10 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: U-blox GNSS Receiver
 
-allOf:
-  - $ref: gnss-common.yaml#
-  - $ref: /schemas/serial/serial-peripheral-props.yaml#
-
 maintainers:
   - Johan Hovold <johan@...nel.org>
 
@@ -32,6 +28,9 @@ properties:
   reset-gpios:
     maxItems: 1
 
+  safeboot-gpios:
+    maxItems: 1
+
   vcc-supply:
     description: >
       Main voltage regulator
@@ -49,6 +48,18 @@ required:
   - compatible
   - vcc-supply
 
+allOf:
+  - $ref: gnss-common.yaml#
+  - $ref: /schemas/serial/serial-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: u-blox,neo-6m
+    then:
+      properties:
+        safeboot-gpios: false
+
 unevaluatedProperties: false
 
 examples:
@@ -61,5 +72,6 @@ examples:
             v-bckp-supply = <&gnss_v_bckp_reg>;
             vcc-supply = <&gnss_vcc_reg>;
             reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+            safeboot-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
         };
     };

-- 
2.34.1