[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20250522053835.3495975-1-jirislaby@kernel.org>
Date: Thu, 22 May 2025 07:38:35 +0200
From: "Jiri Slaby (SUSE)" <jirislaby@...nel.org>
To: gregkh@...uxfoundation.org
Cc: linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org,
"Jiri Slaby (SUSE)" <jirislaby@...nel.org>,
Mans Rullgard <mans@...sr.com>,
stable@...r.kernel.org
Subject: [PATCH v2] tty: serial: 8250_omap: fix TX with DMA for am33xx
Commit 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo")
introduced an error in the TX DMA handling for 8250_omap.
When the OMAP_DMA_TX_KICK flag is set, the "skip_byte" is pulled from
the kfifo and emitted directly in order to start the DMA. While the
kfifo is updated, dma->tx_size is not decreased. This leads to
uart_xmit_advance() called in omap_8250_dma_tx_complete() advancing the
kfifo by one too much.
In practice, transmitting N bytes has been seen to result in the last
N-1 bytes being sent repeatedly.
This change fixes the problem by moving all of the dma setup after the
OMAP_DMA_TX_KICK handling and using kfifo_len() instead of the DMA size
for the 4-byte cutoff check. This slightly changes the behaviour at
buffer wraparound, but it still transmits the correct bytes somehow.
Now, the "skip_byte" would no longer be accounted to the stats. As
previously, dma->tx_size included also this skip byte, up->icount.tx was
updated by aforementioned uart_xmit_advance() in
omap_8250_dma_tx_complete(). Fix this by using the uart_fifo_out()
helper instead of bare kfifo_get().
Based on patch by Mans Rullgard <mans@...sr.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@...nel.org>
Fixes: 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo")
Link: https://lore.kernel.org/all/20250506150748.3162-1-mans@mansr.com/
Reported-by: Mans Rullgard <mans@...sr.com>
Cc: stable@...r.kernel.org
---
[v2] S-O-B added
---
drivers/tty/serial/8250/8250_omap.c | 25 ++++++++++---------------
1 file changed, 10 insertions(+), 15 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 2a0ce11f405d..72ae08d6204f 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1173,16 +1173,6 @@ static int omap_8250_tx_dma(struct uart_8250_port *p)
return 0;
}
- sg_init_table(&sg, 1);
- ret = kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1,
- UART_XMIT_SIZE, dma->tx_addr);
- if (ret != 1) {
- serial8250_clear_THRI(p);
- return 0;
- }
-
- dma->tx_size = sg_dma_len(&sg);
-
if (priv->habit & OMAP_DMA_TX_KICK) {
unsigned char c;
u8 tx_lvl;
@@ -1207,18 +1197,22 @@ static int omap_8250_tx_dma(struct uart_8250_port *p)
ret = -EBUSY;
goto err;
}
- if (dma->tx_size < 4) {
+ if (kfifo_len(&tport->xmit_fifo) < 4) {
ret = -EINVAL;
goto err;
}
- if (!kfifo_get(&tport->xmit_fifo, &c)) {
+ if (!uart_fifo_out(&p->port, &c, 1)) {
ret = -EINVAL;
goto err;
}
skip_byte = c;
- /* now we need to recompute due to kfifo_get */
- kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1,
- UART_XMIT_SIZE, dma->tx_addr);
+ }
+
+ sg_init_table(&sg, 1);
+ ret = kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1, UART_XMIT_SIZE, dma->tx_addr);
+ if (ret != 1) {
+ ret = -EINVAL;
+ goto err;
}
desc = dmaengine_prep_slave_sg(dma->txchan, &sg, 1, DMA_MEM_TO_DEV,
@@ -1228,6 +1222,7 @@ static int omap_8250_tx_dma(struct uart_8250_port *p)
goto err;
}
+ dma->tx_size = sg_dma_len(&sg);
dma->tx_running = 1;
desc->callback = omap_8250_dma_tx_complete;
--
2.49.0
Powered by blists - more mailing lists