| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250522-st_iio_fix-v1-1-d689b35f1612@gocontroll.com>
Date: Thu, 22 May 2025 11:34:20 +0200
From: Maud Spierings via B4 Relay <devnull+maudspierings.gocontroll.com@...nel.org>
To: Jonathan Cameron <jic23@...nel.org>,
David Lechner <dlechner@...libre.com>,
Nuno Sá <nuno.sa@...log.com>,
Andy Shevchenko <andy@...nel.org>, Christian Heusel <christian@...sel.eu>,
Linus Walleij <linus.walleij@...aro.org>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
stable@...r.kernel.org, Maud Spierings <maudspierings@...ontroll.com>
Subject: [PATCH] iio: common: st_sensors: Fix use of uninitialize device
structs
From: Maud Spierings <maudspierings@...ontroll.com>
Throughout the various probe functions &indio_dev->dev is used before it
is initialized. This caused a kernel panic in st_sensors_power_enable
when the call to devm_regulator_bulk_get_enable() fails and then calls
dev_err_probe() with the uninitialized device.
This seems to only cause a panic with dev_err_probe(), dev_err,
dev_warn and dev_info don't seem to cause a panic, but are fixed
as well.
---
When I search for general &indio_dev->dev usage, I see quite a lot more
hits, but I am not sure if there are issues with those too.
This issue has existed for a long time it seems and therefore it is
nearly impossible to find a proper fixes tag. I would love to see it at
least backported to 6.12 as that is where I encountered it, and I
believe the patch should apply without conflicts.
The investigation into this issue can be found in this thread [1]
[1]: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189MB1009.EURP189.PROD.OUTLOOK.COM/
Signed-off-by: Maud Spierings <maudspierings@...ontroll.com>
---
drivers/iio/accel/st_accel_core.c | 10 +++----
drivers/iio/common/st_sensors/st_sensors_core.c | 35 +++++++++++-----------
drivers/iio/common/st_sensors/st_sensors_trigger.c | 18 +++++------
3 files changed, 31 insertions(+), 32 deletions(-)
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 99cb661fabb2d9cc1943fa8d0a6f3becb71126e6..a7961c610ed203d039bbf298c8883031a578fb0b 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -1353,6 +1353,7 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev)
union acpi_object *ont;
union acpi_object *elements;
acpi_status status;
+ struct device *parent = indio_dev->dev.parent;
int ret = -EINVAL;
unsigned int val;
int i, j;
@@ -1371,7 +1372,7 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev)
};
- adev = ACPI_COMPANION(indio_dev->dev.parent);
+ adev = ACPI_COMPANION(parent);
if (!adev)
return -ENXIO;
@@ -1380,8 +1381,7 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev)
if (status == AE_NOT_FOUND) {
return -ENXIO;
} else if (ACPI_FAILURE(status)) {
- dev_warn(&indio_dev->dev, "failed to execute _ONT: %d\n",
- status);
+ dev_warn(parent, "failed to execute _ONT: %d\n", status);
return status;
}
@@ -1457,12 +1457,12 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev)
}
ret = 0;
- dev_info(&indio_dev->dev, "computed mount matrix from ACPI\n");
+ dev_info(parent, "computed mount matrix from ACPI\n");
out:
kfree(buffer.pointer);
if (ret)
- dev_dbg(&indio_dev->dev,
+ dev_dbg(parent,
"failed to apply ACPI orientation data: %d\n", ret);
return ret;
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 8ce1dccfea4f5aaff45d3d40f6542323dd1f0b09..11cbf561b16d41f429745abb516c137cfbb302bb 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -154,7 +154,7 @@ static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
return err;
st_accel_set_fullscale_error:
- dev_err(&indio_dev->dev, "failed to set new fullscale.\n");
+ dev_err(indio_dev->dev.parent, "failed to set new fullscale.\n");
return err;
}
@@ -231,7 +231,7 @@ int st_sensors_power_enable(struct iio_dev *indio_dev)
ARRAY_SIZE(regulator_names),
regulator_names);
if (err)
- return dev_err_probe(&indio_dev->dev, err,
+ return dev_err_probe(parent, err,
"unable to enable supplies\n");
return 0;
@@ -241,13 +241,14 @@ EXPORT_SYMBOL_NS(st_sensors_power_enable, "IIO_ST_SENSORS");
static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
struct st_sensors_platform_data *pdata)
{
+ struct device *parent = indio_dev->dev.parent;
struct st_sensor_data *sdata = iio_priv(indio_dev);
/* Sensor does not support interrupts */
if (!sdata->sensor_settings->drdy_irq.int1.addr &&
!sdata->sensor_settings->drdy_irq.int2.addr) {
if (pdata->drdy_int_pin)
- dev_info(&indio_dev->dev,
+ dev_info(parent,
"DRDY on pin INT%d specified, but sensor does not support interrupts\n",
pdata->drdy_int_pin);
return 0;
@@ -256,29 +257,27 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
switch (pdata->drdy_int_pin) {
case 1:
if (!sdata->sensor_settings->drdy_irq.int1.mask) {
- dev_err(&indio_dev->dev,
- "DRDY on INT1 not available.\n");
+ dev_err(parent, "DRDY on INT1 not available.\n");
return -EINVAL;
}
sdata->drdy_int_pin = 1;
break;
case 2:
if (!sdata->sensor_settings->drdy_irq.int2.mask) {
- dev_err(&indio_dev->dev,
- "DRDY on INT2 not available.\n");
+ dev_err(parent, "DRDY on INT2 not available.\n");
return -EINVAL;
}
sdata->drdy_int_pin = 2;
break;
default:
- dev_err(&indio_dev->dev, "DRDY on pdata not valid.\n");
+ dev_err(parent, "DRDY on pdata not valid.\n");
return -EINVAL;
}
if (pdata->open_drain) {
if (!sdata->sensor_settings->drdy_irq.int1.addr_od &&
!sdata->sensor_settings->drdy_irq.int2.addr_od)
- dev_err(&indio_dev->dev,
+ dev_err(parent,
"open drain requested but unsupported.\n");
else
sdata->int_pin_open_drain = true;
@@ -336,6 +335,7 @@ EXPORT_SYMBOL_NS(st_sensors_dev_name_probe, "IIO_ST_SENSORS");
int st_sensors_init_sensor(struct iio_dev *indio_dev,
struct st_sensors_platform_data *pdata)
{
+ struct device *parent = indio_dev->dev.parent;
struct st_sensor_data *sdata = iio_priv(indio_dev);
struct st_sensors_platform_data *of_pdata;
int err = 0;
@@ -343,7 +343,7 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
mutex_init(&sdata->odr_lock);
/* If OF/DT pdata exists, it will take precedence of anything else */
- of_pdata = st_sensors_dev_probe(indio_dev->dev.parent, pdata);
+ of_pdata = st_sensors_dev_probe(parent, pdata);
if (IS_ERR(of_pdata))
return PTR_ERR(of_pdata);
if (of_pdata)
@@ -370,7 +370,7 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
if (err < 0)
return err;
} else
- dev_info(&indio_dev->dev, "Full-scale not possible\n");
+ dev_info(parent, "Full-scale not possible\n");
err = st_sensors_set_odr(indio_dev, sdata->odr);
if (err < 0)
@@ -405,7 +405,7 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
mask = sdata->sensor_settings->drdy_irq.int2.mask_od;
}
- dev_info(&indio_dev->dev,
+ dev_info(parent,
"set interrupt line to open drain mode on pin %d\n",
sdata->drdy_int_pin);
err = st_sensors_write_data_with_mask(indio_dev, addr,
@@ -593,21 +593,20 @@ EXPORT_SYMBOL_NS(st_sensors_get_settings_index, "IIO_ST_SENSORS");
int st_sensors_verify_id(struct iio_dev *indio_dev)
{
struct st_sensor_data *sdata = iio_priv(indio_dev);
+ struct device *parent = indio_dev->dev.parent;
int wai, err;
if (sdata->sensor_settings->wai_addr) {
err = regmap_read(sdata->regmap,
sdata->sensor_settings->wai_addr, &wai);
if (err < 0) {
- dev_err(&indio_dev->dev,
- "failed to read Who-Am-I register.\n");
- return err;
+ return dev_err_probe(parent, err,
+ "failed to read Who-Am-I register.\n");
}
if (sdata->sensor_settings->wai != wai) {
- dev_warn(&indio_dev->dev,
- "%s: WhoAmI mismatch (0x%x).\n",
- indio_dev->name, wai);
+ dev_warn(parent, "%s: WhoAmI mismatch (0x%x).\n",
+ indio_dev->name, wai);
}
}
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 9d4bf822a15dfcdd6c2835f6b9d7698cd3cb0b08..32c3278968089699dff5329e943d92b151b55fdf 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -127,7 +127,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
sdata->trig = devm_iio_trigger_alloc(parent, "%s-trigger",
indio_dev->name);
if (sdata->trig == NULL) {
- dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n");
+ dev_err(parent, "failed to allocate iio trigger.\n");
return -ENOMEM;
}
@@ -143,7 +143,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
case IRQF_TRIGGER_FALLING:
case IRQF_TRIGGER_LOW:
if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
- dev_err(&indio_dev->dev,
+ dev_err(parent,
"falling/low specified for IRQ but hardware supports only rising/high: will request rising/high\n");
if (irq_trig == IRQF_TRIGGER_FALLING)
irq_trig = IRQF_TRIGGER_RISING;
@@ -156,21 +156,21 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
sdata->sensor_settings->drdy_irq.mask_ihl, 1);
if (err < 0)
return err;
- dev_info(&indio_dev->dev,
+ dev_info(parent,
"interrupts on the falling edge or active low level\n");
}
break;
case IRQF_TRIGGER_RISING:
- dev_info(&indio_dev->dev,
+ dev_info(parent,
"interrupts on the rising edge\n");
break;
case IRQF_TRIGGER_HIGH:
- dev_info(&indio_dev->dev,
+ dev_info(parent,
"interrupts active high level\n");
break;
default:
/* This is the most preferred mode, if possible */
- dev_err(&indio_dev->dev,
+ dev_err(parent,
"unsupported IRQ trigger specified (%lx), enforce rising edge\n", irq_trig);
irq_trig = IRQF_TRIGGER_RISING;
}
@@ -179,7 +179,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
if (irq_trig == IRQF_TRIGGER_FALLING ||
irq_trig == IRQF_TRIGGER_RISING) {
if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) {
- dev_err(&indio_dev->dev,
+ dev_err(parent,
"edge IRQ not supported w/o stat register.\n");
return -EOPNOTSUPP;
}
@@ -214,13 +214,13 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
sdata->trig->name,
sdata->trig);
if (err) {
- dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n");
+ dev_err(parent, "failed to request trigger IRQ.\n");
return err;
}
err = devm_iio_trigger_register(parent, sdata->trig);
if (err < 0) {
- dev_err(&indio_dev->dev, "failed to register iio trigger.\n");
+ dev_err(parent, "failed to register iio trigger.\n");
return err;
}
indio_dev->trig = iio_trigger_get(sdata->trig);
---
base-commit: 7bac2c97af4078d7a627500c9bcdd5b033f97718
change-id: 20250522-st_iio_fix-1c58fdd4d420
Best regards,
--
Maud Spierings <maudspierings@...ontroll.com>
Powered by blists - more mailing lists