[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4ed39a7f-bfca-4095-98ea-56b3c183b8f1@kernel.org>
Date: Thu, 22 May 2025 17:00:06 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: David Lechner <dlechner@...libre.com>,
Michael Hennerich <michael.hennerich@...log.com>,
Nuno Sá <nuno.sa@...log.com>,
Trevor Gamblin <tgamblin@...libre.com>,
Uwe Kleine-König <ukleinek@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/3] dt-bindings: pwm: adi,axi-pwmgen: fix clocks
On 22/05/2025 16:49, David Lechner wrote:
> Fix a shortcoming in the bindings that doesn't allow for a separate
> external clock.
>
> The AXI PWMGEN IP block has a compile option ASYNC_CLK_EN that allows
> the use of an external clock for the PWM output separate from the AXI
> clock that runs the peripheral.
>
> This was missed in the original bindings and so users were writing dts
> files where the one and only clock specified would be the external
> clock, if there was one, incorrectly missing the separate AXI clock.
>
> The correct bindings are that the AXI clock is always required and the
> external clock is optional (must be given only when HDL compile option
> ASYNC_CLK_EN=1).
>
> Fixes: 1edf2c2a2841 ("dt-bindings: pwm: Add AXI PWM generator")
> Signed-off-by: David Lechner <dlechner@...libre.com>
> ---
> Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
Please test your patches. This does not pass build (binding_check). :/
Best regards,
Krzysztof
Powered by blists - more mailing lists