linux-kernel - [PATCH 6/6] ARM: dts: vf: vf610-zii-cfu1: rename node name *-gpio to *-gpios

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250523161726.548682-6-Frank.Li@nxp.com>
Date: Fri, 23 May 2025 12:17:25 -0400
From: Frank Li <Frank.Li@....com>
To: Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Pengutronix Kernel Team <kernel@...gutronix.de>,
	Stefan Agner <stefan@...er.ch>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	linux-arm-kernel@...ts.infradead.org (moderated list:ARM/FREESCALE VYBRID ARM ARCHITECTURE),
	devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@...r.kernel.org (open list)
Cc: imx@...ts.linux.dev
Subject: [PATCH 6/6] ARM: dts: vf: vf610-zii-cfu1: rename node name *-gpio to *-gpios

Rename node name *-gpio to *-gpios to fix below CHECK_DTB warning:

arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dtb: sfp (sff,sff):
    'los-gpio', 'tx-disable-gpio' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Frank Li <Frank.Li@....com>
---
 arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
index 24eae049af69a..929426c1299cc 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
@@ -68,8 +68,8 @@ sff: sfp {
 		pinctrl-0 = <&pinctrl_optical>;
 		pinctrl-names = "default";
 		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 	};
 
 	supply-voltage-monitor {
-- 
2.34.1